Towards a better management of urban traffic pollution using a Pareto max flow approach

Rising levels of air pollution is a major concern across many parts of the world. In this article, we develop a transportation policy to handle air pollution caused by the heavy flow of traffic in urban areas. In particular, we aim to distribute the traffic flow more evenly through a city, by developing a flow algorithm that computes multiple solutions, each of which accommodates the maximum flow. The paper makes the following contributions to build such a transportation policy: (a) Develops a Pareto-optimal Max Flow Algorithm (PMFA) to suggest multiple max flow solutions. (b) Introduces the notion of k-optimality into PMFA to ensure that the suggested pareto solutions are sufficiently distinct from each other – referred to as Pareto-k-optimal Max Flow Algorithm (k-PMFA). (c) Through a series of experiments performed using the well-known traffic simulator SUMO and by doing emission modeling on the New York map, we could show that our policy distributes the air pollution more uniformly across locations.     

Commercially managed road funds: managing roads like a business,not like a bureaucracy

Nearly all countries are seriously short of revenues for investment and maintenance of roads. Improving utilization of the existing road budget has helped to narrow, but not eliminate, this financing gap. Requests for additional resources from the government's budget have fallen on deaf ears, because the road sector has grown too large to be fully-financed through general tax revenues. Government tax systems were not designed to finance major economic sectors like roads. Faced with an acute shortage of funds, many road agencies have introduced tolls on high-volume roads and have invited the private sector to build and operate such roads under concession agreements. Although this has narrowed the financing gap, tolling is only economic on a small part of the road network. Tolls have thus had a relatively small impact on the financing gap. Against this background, and mindful of the fact that roads are now 'big business' on the scale of the Fortune Global 500, a growing number of countries have started to 'bring roads into the market place, put them on a fee-for-service basis and manage them like a business.' The fee-for-service concept, though superficially like the user-pay principle and the associated road funds which became popular during the 1950s, differs from user-pay in a number of important respects. The key differences are that: (i) only road user charges go into the road fund (i.e., there are no earmarked taxes); (ii) the fund is managed by a representative board with half or more members representing road users and the business community; (iii) members are nominated by the constituencies they represent and there is an independent chairperson; (iv) financing arrangements are designed to ensure that money is not diverted from other sectors; (v) funds are managed pro-actively by a small secretariat; (vi) there are published financial regulations governing the way funds are managed; (vii) charges are adjusted regularly to meet agreed expenditure targets; and (viii) there are regular technical and financial audits. Other important characteristics are that most commercially managed road funds are managed through a separate road fund administration, funds are channeled to all roads (sometimes even to unclassified roads) and they are introduced as part of a wider agenda to commercialize road management. Some of these road funds have been set up as road public utilities under a board with powers to set their own tariffs.     

Will a higher free-flow speed lead us to a less congested freeway?

An approach based on cell transmission model (CTM) is proposed to estimate the impact of variable free-flow speeds (FFS) on the performance of a freeway system. Based on the basic CTM, four typical freeway control strategies consisting of non control, local ramp metering, coordinated ramp metering and global control are first formulated. Then the method of adjusting model parameters to the changed free-flow speeds is presented. Among the adjustments, an experimental function based on Fan and Seibold (2014) is proposed to change the jam density. Several useful measures are defined to estimate and compare the performances of different freeways. The following three main observations are obtained from numerical experiments. (a) With the gradually increasing FFS, the throughput of freeway will increase at the beginning and then change to decrease. (b) With the increasing FFS, the average delay of vehicles will decrease at the beginning and then change to increase. (c) A series of free-flow speeds associate with the best performance of freeway. These observations are theoretically analyzed through investigating the location and capacity of bottleneck. Study shows that in general the actual bottleneck capacity will increase at the beginning and then change to decrease with the continually increasing FFS. In view of the positive correlation between traffic delay and bottleneck capacity, the theoretical analysis confirms the numerical observations. The findings of this study can deepen the understanding of freeway systems and help management agents adopt proper measures to improve the performance of the whole system.     

Are HOV/eco-lanes a sustainable option to reducing emissions in a medium-sized European city?

Innovative traffic management measures are needed to reduce transportation-related emissions. While in Europe, road lane management has focused mainly on introduction of bus lanes, the conversion to High Occupancy Vehicles (HOV) and eco-lanes (lanes dedicated to vehicles running on alternative fuels) has not been studied comprehensively. The objectives of this research are to: (1) Develop an integrated microscopic modeling platform calibrated with real world data to assess both traffic and emissions impacts of future Traffic Management Strategies (TMS) in an urban area; (2) Evaluate the introduction of HOV/eco-lanes in three different types of roads, freeway, arterial and urban routes, in an European medium-sized city and its effects in terms of emissions and traffic performance. The methodology consists of three distinct phases: (a) Traffic and road inventory data collection; (b) Traffic and emissions simulation using an integrated platform of microscopic simulation; and (c) Evaluation of scenarios. For the baseline scenario, the statistical analysis shows valid results. The results show that HOV and eco-lanes in a medium European city are feasible, and when the Average Occupancy of Vehicles (AOV) increases, on freeways, the majority of vehicles can reduce their travel time (2%) with a positive impact in terms of total emissions (−38% NO_x, −39% HC, −43% CO and −37% CO₂). On urban and arterial corridors, the reduction in emissions could be achieved only if the AOV increases from 1.50 to 1.70 passengers/vehicle. Total emissions of the corridor with an AOV of 1.70 passengers/vehicle can be reduced up to 35–36% for the urban route while the values can be reduced by 36–39% for the arterial road. With the introduction of Hybrid Electric Vehicles (HEV) and Electric Vehicles (EV) it is possible to reduce emissions, although the introduction of eco-lanes did not show significant reductions in emissions. When both policies are simulated together, an emissions improvement is observed for the arterial route and for two of the scenarios.     

Cooperative traffic control of a mixed network with two urban regions and a freeway

Currently most optimization methods for urban transport networks (i) are suited for networks with simplified dynamics that are far from real-sized networks or (ii) apply decentralized control, which is not appropriate for heterogeneously loaded networks or (iii) investigate good-quality solutions through micro-simulation models and scenario analysis, which make the problem intractable in real time. In principle, traffic management decisions for different sub-systems of a transport network (urban, freeway) are controlled by operational rules that are network specific and independent from one traffic authority to another. In this paper, the macroscopic traffic modeling and control of a large-scale mixed transportation network consisting of a freeway and an urban network is tackled. The urban network is partitioned into two regions, each one with a well-defined Macroscopic Fundamental Diagram (MFD), i.e. a unimodal and low-scatter relationship between region density and outflow. The freeway is regarded as one alternative commuting route which has one on-ramp and one off-ramp within each urban region. The urban and freeway flow dynamics are formulated with the tool of MFD and asymmetric cell transmission model, respectively. Perimeter controllers on the border of the urban regions operating to manipulate the perimeter interflow between the two regions, and controllers at the on-ramps for ramp metering are considered to control the flow distribution in the mixed network. The optimal traffic control problem is solved by a Model Predictive Control (MPC) approach in order to minimize total delay in the entire network. Several control policies with different levels of urban-freeway control coordination are introduced and tested to scrutinize the characteristics of the proposed controllers. Numerical results demonstrate how different levels of coordination improve the performance once compared with independent control for freeway and urban network. The approach presented in this paper can be extended to implement efficient real-world control strategies for large-scale mixed traffic networks.     

Specification of a tour-based neighborhood shopping model

This paper presents a state-of-the practice neighborhood shopping travel demand model. The model structure is designed to incorporate decisions across five dimensions of shopping travel, including decisions of: (1) household tour frequency; (2) participating party; (3) shopping tour type; (4) mode, and (5) destination choices using a tour-based nested-logit model. As a neighborhood model, we have also captured the interrelated effects of three main factors associated with shopping travel decisions both within and outside of the neighborhood, including the residential location within the neighborhood, the neighborhood regional setting and the household structure. The model was validated using the travel data collected in three neighborhoods located in the Puget Sound region, WA. Results show that household socio-demographics have significant effects on the decisions for household tour frequency, mode and destination choices, while the characteristics of the traveling party have considerable impacts on the decisions for tour type. The level of service and the zone attractions influence decisions about mode and destination choices. The day of week variable (weekday versus weekend) is statistically significant in all models, indicating that weekday shopping travel decisions differ from weekend, across all five dimensions of interest. The paper concludes with a discussion about how the model can be used to examine policy-related neighborhood issues (e.g. accessibility).     

Strategic de-confliction in the presence of a large number of 4D trajectories using a causal modeling approach

This paper presents a strategic de-confliction algorithm based on causal modeling developed under the STREAM project and launched under the umbrella of the Single European Sky ATM Research (SESAR) Program. The basic underlying concept makes use of the enriched information included in the Shared Business Trajectories (SBTs) of the flights prior to takeoff (or in the Reference Business Trajectories (RBTs) if the flight is airborne) to allocate conflict-free trajectories in a traffic planning phase that should lead to an actual conflict-free scenario in the flight execution phase in the absence of flight and/or network uncertainties. The proposed approach could decrease the workload of the air traffic controllers, thus improving the Air Traffic Management (ATM) capacity while meeting the maximum possible expectations of the Airspace Users’ requirements in terms of horizontal flight efficiency. The main modules of the implemented system are also presented in this paper; these modules are designed to enable the processing of thousands of trajectories within a few seconds or minutes and encompass a global network scope with a planning horizon of approximately 2–3 h. The causal model applied for network conflict resolution and flight routing allocation is analyzed to demonstrate how the emergent dynamics (i.e., domino effects) of local trajectory amendments can be efficiently explored to identify conflict-free Pareto-efficient network scenarios. Various performance indicators can be taken into account in the multi-criteria optimization process, thus offering to the network manager a flexible tool for fostering a collaborative planning process.     

Roads in transition: Integrated modeling of a manufacturer-traveler-infrastructure system in a mixed autonomous/human driving environment

This paper develops an integrated model to characterize the market penetration of autonomous vehicles (AVs) in urban transportation networks. The model explicitly accounts for the interplay among the AV manufacturer, travelers with heterogeneous values of travel time (VOTT), and road infrastructure capacity. By making in-vehicle time use more leisurely or productive, AVs reduce travelers’ VOTT. In addition, AVs can move closer together than human-driven vehicles because of shorter safe reaction time, which leads to increased road capacity. On the other hand, the use of AV technologies means added manufacturing cost and higher price. Thus, traveler adoption of AVs will trade VOTT savings with additional out-of-pocket cost. The model is structured as a leader (AV manufacturer)-follower (traveler) game. Given the cost of producing AVs, the AV manufacturer sets AV price to maximize profit while anticipating AV market penetration. Given an AV price, the vehicle and routing choice of heterogeneous travelers are modeled by combining a multinomial logit model with multi-modal multi-class user equilibrium (UE). The overall problem is formulated as a mathematical program with complementarity constraints (MPCC), which is challenging to solve. We propose a solution approach based on piecewise linearization of the MPCC as a mixed-integer linear program (MILP) and solving the MILP to global optimality. Non-uniform distribution of breakpoints that delimit piecewise intervals and feasibility-based domain reduction are further employed to reduce the approximation error brought by linearization. The model is implemented in a simplified Singapore network with extensive sensitivity analyses and the Sioux Falls network. Computational results demonstrate the effectiveness and efficiency of the solution approach and yield valuable insights about transportation system performance in a mixed autonomous/human driving environment.     

Modelling route choice behaviour in a tolled road network with a time surplus maximisation bi-objective user equilibrium model

In this paper, we propose a novel approach to model route choice behaviour in a tolled road network with a bi-objective approach, assuming that all users have two objectives: (1) minimise travel time; and (2) minimise toll cost. We assume further that users have different preferences in the sense that for any given path with a specific toll, there is a limit on the time that an individual would be willing to spend. Different users can have different preferences represented by this indifference curve between toll and time. Time surplus is defined as the maximum time minus the actual time. Given a set of paths, the one with the highest (or least negative) time surplus will be the preferred path for the individual. This will result in a bi-objective equilibrium solution satisfying the time surplus maximisation bi-objective user equilibrium (TSmaxBUE) condition. That is, for each O–D pair, all individuals are travelling on the path with the highest time surplus value among all the efficient paths between this O–D pair.We show that the TSmaxBUE condition is a proper generalisation of user equilibrium with generalised cost function, and that it is equivalent to bi-objective user equilibrium. We also present a multi-user class version of the TSmaxBUE condition and demonstrate our concepts with illustrative examples.     

Dynamic user equilibrium based on a hydrodynamic model

In this paper we present a continuous-time network loading procedure based on the Lighthill–Whitham–Richards model proposed by Lighthill and Whitham, 1955, Richards, 1956. A system of differential algebraic equations (DAEs) is proposed for describing traffic flow propagation, travel delay and route choices. We employ a novel numerical apparatus to reformulate the scalar conservation law as a flow-based partial differential equation (PDE), which is then solved semi-analytically with the Lax–Hopf formula. This approach allows for an efficient computational scheme for large-scale networks. We embed this network loading procedure into the dynamic user equilibrium (DUE) model proposed by Friesz et al. (1993). The DUE model is solved as a differential variational inequality (DVI) using a fixed-point algorithm. Several numerical examples of DUE on networks of varying sizes are presented, including the Sioux Falls network with a significant number of paths and origin–destination pairs (OD).The DUE model presented in this article can be formulated as a variational inequality (VI) as reported in Friesz et al. (1993). We will present the Kuhn–Tucker (KT) conditions for that VI, which is a linear system for any given feasible solution, and use them to check whether a DUE solution has been attained. In order to solve for the KT multiplier we present a decomposition of the linear system that allows efficient computation of the dual variables. The numerical solutions of DUE obtained from fixed-point iterations will be tested against the KT conditions and validated as legitimate solutions.     

Development and evaluation of a hybrid travel time forecasting model

The purpose of this paper is to develop and evaluate a hybrid travel time forecasting model with geographic information systems (GIS) technologies for predicting link travel times in congested road networks. In a separate study by You and Kim (cf. You, J., Kim, T.J., 1999b. In: Proceedings of the Third Bi-Annual Conference of the Eastern Asia Society for Transportation Studies, 14–17 September, Taipei, Taiwan), a non-parametric regression model has been developed as a core forecasting algorithm to reduce computation time and increase forecasting accuracy. Using the core forecasting algorithm, a prototype hybrid forecasting model has been developed and tested by deploying GIS technologies in the following areas: (1) storing, retrieving, and displaying traffic data to assist in the forecasting procedures, (2) building road network data, and (3) integrating historical databases and road network data. This study shows that adopting GIS technologies in link travel time forecasting is efficient for achieving two goals: (1) reducing computational delay and (2) increasing forecasting accuracy.     

Exhaust emissions generated under actual operating conditions from a hybrid vehicle and an electric one fitted with a range extender

The paper describes exhaust emission tests performed on a PHEV (Plug-in Hybrid Electric Vehicle) and a BEV (Battery Electric Vehicle), in which the combustion engine was used as a range extender. The measurements of the exhaust emissions were performed for CO₂/fuel consumption, CO, THC and NO_x. The RDE measurements were performed including the engine operating parameters and emissions analysis. This analysis shows that the engines of BEVs and PHEVs operate in a different parameter range when under actual operating conditions, which directly translates into the exhaust emission values. This is particularly the case for the emission of NO_x. The investigations were carried out for two routes differentiated by the length and share of the urban and extra-urban cycles. For both routes, the emission of THC and CO were lower for the PHEV engine – HC by 69% (22 mg/km, route 1) and 6% (15 mg/km, route 2), CO by 69% (0.12 mg/km, route 1) and 80% (0.1 mg/km, route 2). For route 1, characterized by a greater share of the urban cycle, the emission of NO_x was lower by 70% (2 mg/km) for the BEV engine, and (route 2) lower by 60% (8 mg/km) for the PHEV engine. Additionally, the curves of the exhaust emissions in time for individual exhaust components have been presented that indicate that in the motorway cycle the emission of THC and CO from the BEV vehicle increases significantly up to ten times compared to urban cycle.     

The potential of mobility as a service bundles as a mobility management tool

Transportation - The Mobility as a Service (MaaS) concept has recently taken the transport industry by storm. However, as applications and research on it are limited, there is still little evidence...     

The capacity of a priority intersection

We present simple formulae for the maximum capacity of an intersection of a single stream of minor traffic with a single stream of major (priority) traffic. The method allows for both mixed (nonhomogeneous) vehicle types and for inconsistent driver behaviour in the minor traffic stream. For a realistic class of major headway distributions the capacity is the harmonic mean of the capacities for each individual vehicle type. The formulae include generalisations of Tanner's formula for the cases of inconsistent and/or nonhomogeneous minor vehicles.     

Development and evaluation of a statistically reliable traffic counting program

This paper reviews the existing procedures to compute the seasonal factors, growth factors, and the number of automatic traffic recorder stations (ATRs) for developing a statistically reliable traffic counting program. The review is based on, (i) theoretical evaluation of the procedures, (ii) analysis of the results obtained from applying these procedures to extensive real life data, and (iii) experience of past researchers with these methods. The paper primarily deals with existing statistical procedures for determining seasonal factors, since it is believed that these factors play the most important role in estimating Annual Average Daily Traffic (AADTs) from short counts. The procedure of cluster analysis (which is most commonly used to determine seasonal factors) is critically reviewed. The shortcomings of this method motivated the development of a different statistical procedure, based on regression analysis, to determine seasonal factors. It is shown that this newly developed method gives better results than the cluster analysis techniques. Furthermore, separate sections are dedicated to a thorough analysis of determination of number of ATR stations and computation of growth factors.     

Multi-scale perimeter control approach in a connected-vehicle environment

This paper proposes a novel approach to integrate optimal control of perimeter intersections (i.e. to minimize local delay) into the perimeter control scheme (i.e. to optimize traffic performance at the network level). This is a complex control problem rarely explored in the literature. In particular, modeling the interaction between the network level control and the local level control has not been fully considered. Utilizing the Macroscopic Fundamental Diagram (MFD) as the traffic performance indicator, we formulate a dynamic system model, and design a Model Predictive Control (MPC) based controller coupling two competing control objectives and optimizing the performance at the local and the network level as a whole. To solve this highly non-linear optimization problem, we employ an approximation framework, enabling the optimal solution of this large-scale problem to be feasible and efficient. Numerical analysis shows that by applying the proposed controller, the protected network can operate around the desired state as expressed by the MFD, while the total delay at the perimeter is minimized as well. Moreover, the paper sheds light on the robustness of the proposed controller. This multi-scale hybrid controller is further extended to a stochastic MPC scheme, where connected vehicles (CV) serve as the only data source. Hence, low penetration rates of CVs lead to strong noises in the controller. This is a first attempt to develop a network-level traffic control methodology by using the emerging CV technology. We consider the stochasticity in traffic state estimation and the shape of the MFD. Simulation analysis demonstrates the robustness of the proposed stochastic controller, showing that efficient controllers can indeed be designed with this newly-spread vehicle technology even in the absence of other data collection schemes (e.g. loop detectors).     

Evaluation of a transportation system employing autonomous vehicles

The problem of studying public transportation systems with autonomous vehicles is challenging because of behavioral differences that make existing models poorly fit and the technical difficulties involved in studying large autonomous systems operating on a grand scale. In this paper, we propose the following: (i) an autonomous transportation network setting; (ii) a method for modeling autonomous vehicles in simulation; and (iii) a high‐performance simulation platform that allows analysis and visualization of transportation technologies. Results from microsimulation confirm theoretical benefits and improvements from employing autonomous systems in an example setting and highlight the platform's general ability to allow researchers to implement novel transportation systems and study the cost benefit variations occurring between them. Copyright © 2017 John Wiley & Sons, Ltd.     

The analysis of regulation on private highway investment under a build-operate-transfer scheme

The build-operate-transfer (BOT) approach has become an attractive instrument for public facility provision, especially for a project that faces difficulty with public finance. This study analyzes the regulation alternatives on private highway investment under a BOT scheme and their impacts on traffic flows, travel costs, toll, capacity, and social welfare (total user-benefit in the traffic system including congestion). For comparison, five cases are analyzed: (1) No BOT with maximizing welfare, (2) No BOT with breaking even on finance, (3) BOT without regulation, (4) BOT with a minimum flow constraint (the total users will not be less than those in Case 1), and (5) BOT with a maximum travel cost constraint (the travel cost for users on a non-tolled road will not exceed the maximum tolerance). After each case is modeled and simulated on some functional forms, we find that the case of BOT with regulations performs between the cases of maximizing welfare and that of maximizing profit. From the perspective of the government, regulation has less power in a project with low elastic demand. Furthermore, even when the regulation is strict, a high cost-efficient firm with BOT could result in a higher level of social welfare than that without a BOT scheme.     

Optimal design and benefits of a short turning strategy for a bus corridor

We develop a short turning model using demand information from station to station within a single bus line-single period setting, aimed at increasing the service frequency on the more loaded sections to deal with spatial concentration of demand considering both operators’ and users’ costs. We find analytical expressions for optimal values of the design variables, namely frequencies (inside and outside the short cycle), capacity of vehicles and the position of the short turn limit stations. These expressions are used to analyze the influence of different parameters in the final solution. The design variables and the corresponding cost components for operators and users (waiting and in-vehicle times) are compared against an optimized normal operation scheme (single frequency). Applications on actual transit corridors exhibiting different demand profiles are conducted, calculating the optimal values for the design variables and the resulting benefits for each case. Results show the typical demand configurations that are better served using a short turn strategy.     

Multiple equilibria in a dynamic traffic network

This study provides an example in which the dynamic user equilibrium (DUE) assignment of a congested road network with bottlenecks is non-unique. In previous studies, the uniqueness of DUE assignments with the bottleneck model has been shown in limited cases such as single-origin and single-destination networks. Consequently, it is still an important issue whether or not uniqueness is a general property of DUE assignments. The present study describes a network in which multiple patterns of link travel time are found, thus providing a negative answer to this question. The network has a loopy structure with multiple bottlenecks and multiple origin-destination (OD) pairs. Given a certain demand pattern of departure times for vehicles leaving their origins, a non-convex set of equilibria with a non-unique pattern of link travel times is shown to exist.