Analysis of ultimate uniaxial compressive strength of stiffened panel considering influence of shear load北大核心CSCD

［Objective］This study aims to explore the law of the critical compression stress of stiffened panels under the influence of in-plane shear load, and whether in-plane shear load combined with lateral pressure will introduce a strong coupling effect. ［Method ］ To this end, nonlinear finite element (FE) software ABAQUS is used to perform numerical simulation analysis under combined loads on a group of FE models. A limit state equation/curve is then derived from the dimensionless calculation results based on the minimum square error method. ［Results］The results show that the influence law of in-plane shear load on the critical compression stress of stiffened panels is clarified, and a limit state equation of stiffened panels that considers the effect of shear load is obtained. ［Conclusion］The limit state equation in this paper can provide references for modifying the ultimate strength of stiffened panels under the influence of in-plane shear load. © 2023 Chinese Journal of Ship Research. All rights reserved.     

Vibration transmission characteristics of composite laminate joints based on power flow北大核心CSCD

[目的]为了研究复合材料层合板连接节点的振动传递特性,提出一种采用有限元功率流法并结合功率流可视化技术的分析方法。[方法]首先,验证用有限元实体单元功率流描述板壳振动的有效性;然后,引入功率流传递率评价指标,提出有限元模型功率流传递率的计算方法,并以导纳功率流法计算结果为参照来验证其有效性;最后,建立嵌入式连接和螺钉连接这2种复合材料层合板的连接模型,计算其功率流传递率曲线和典型功率流矢量图。[结果]对比验证结果表明,2种连接模型的振动传递路径和功率流传递率存在明显差异。[结论]有限元功率流法直观反映了连接结构的振动传递能力及振动能量传递路径,可为复合材料结构设计提供参考。     

Vibration characteristics analysis of ring-stiffened conical shells based on power series method北大核心CSCD

[目的]旨在利用解析法求解环肋圆锥壳的振动方程,对环肋圆锥壳的振动特性进行理论研究。[方法]首先,对圆锥壳分段处理,将圆锥壳沿母线方向、环向和法向的位移分别写成幂级数解的形式,并推导出幂级数项前系数的递推关系式;然后,采用梁模型模拟不同环肋数对圆锥壳振动响应特性的影响;接着,将圆锥壳分段及其环肋边界条件、位移和内力矩阵进行组装求解,得到在外部简谐力激励下圆锥壳的振动响应特性,并将所得结果与ANSYS有限元数值方法的计算结果进行对比,验证所提计算方法的有效性。最后,运用所提理论方法进行环肋圆锥壳的振动特性分析。[结果]结果显示,圆锥壳安装的环肋可明显抑制圆锥壳的振动,具体表现为响应幅值降低、固有频率升高,且在相同频段内共振峰数量减小;增大壳体厚度会引起壳体振动响应幅值降低以及固有频率升高;此外,增大半锥角、轴线长度和环肋数均可降低环肋圆锥壳的振动响应幅值。[结论]研究表明,所用方法对环肋圆锥壳振动的理论研究具有一定意义。     

Multi-objective optimization study on dimensions of medium-sized cruise ship in concept phase北大核心CSCD

［Objective］Aiming at the problem of too many influencing factors and too little reference data for determining the dimensions of medium-sized cruise ships in the concept phase, a simplified multi-objective optimization method based on the fitting of dimensions and performance is proposed. ［Method］First, the dimension relations of medium-sized cruise ships are analyzed and the influence of the latest SOLAS requirements used to determine the optimization range. Second, the influence of cruise ship dimensions on space, resistance, stability and seakeeping are analyzed. Next, based on the principles of genetic algorithms, a multiobjective optimization algorithm with high robustness and high engineering adaptability is determined to establish a multi-objective optimization model for the concept design of medium-sized cruise ships. Finally, the Pareto solution obtained by multi-objective optimization is analyzed to provide initial references for determining the dimensions of the target cruise ship. ［Results］Implemented via a genetic algorithm, the optimization program proposed herein is applied in the concept design of a medium-sized cruise ship in order to optimize the initial dimensions, thereby achieving the expected outcome of providing reasonable initial dimensions for cruise ship design. ［Conclusion ］ The proposed simplified multi-objective optimization model can provide feasible initial dimensions for medium-sized cruise ships in the concept phase. As the Pareto solution obtained by multi-objective optimization has different focuses such as resistance and stability, the most suitable solution needs to be selected according to the design object. © 2023 Chinese Journal of Ship Research. All rights reserved.     

Energy efficiency optimization analysis of fuel cell/lithium battery hybrid ship based on whale optimization algorithm北大核心CSCD

[目的]为提升船舶的能源利用率,对多因素影响下的燃料电池/锂电池混合动力船舶能效优化方法进行分析。[方法]基于Matlab/Simulink仿真建模软件,建立对象船舶的能效仿真模型,研究通航环境要素对船舶能效的影响。考虑动力源特性和船舶功率需求,提出基于模糊逻辑的功率分配策略,以优化系统能量流动。然后在此基础上,以系统总能耗最低为优化目标,建立考虑多因素的船舶航速非线性优化模型,采用鲸鱼优化算法开展优化模型动态寻优,并进行不同航行方法和航行时间约束下的能效优化分析。[结果]结果显示,在总航行时间不变的情况下,采用所提的考虑多因素的船舶能效优化方法可以降低船舶5.04%的总能耗和13.16%的燃料电池氢气总消耗。[结论]所述方法对船舶节能减排具有积极的作用,同时对提高船舶续航力和经济性具有重要意义。