Elaboration and quantitative assessment of manoeuvrability for motorcycle lane change

The desire to quantitatively assess vehicle manoeuvrability and handling has led to the development of various expressions, or metrics, which typically relate system input to system output. With regard to motorcycle manoeuvrability, a notable example of such a measure, or metric, is the Koch index [Koch, J., 1978, Experimentelle und Analytische Untersuchungen des Motorraad-Fahrer Systems. Dissertation, Berlin.]. This article describes the development of a new metric applied to lane change (LC) tests and coined ‘LC roll index’. This metric takes into account the peak-to-peak values of the rider-input steering torque divided by the peak-to-peak roll rate response of the vehicle and normalizes this quantity by the forward velocity. In addition to this new metric, an analytical expression is developed, which in many cases summarizes a motorcycle’s LC performance in a single, terse, analytical term. Experimental results are presented for three vastly different motorcycles: a scooter, a street, and a touring motorcycle performing variations of the LC manoeuvre. Numerous test runs for each vehicle are analysed and the results are summarized along with those presented in the recent literature. Finally, simulation results are presented to highlight the correlation between the proposed indices and handling.     

A General Method for the Evaluation of Vehicle Manoeuvrability with Special Emphasis on Motorcycles

This paper presents a novel approach to the assessment of the manoeuvrability of vehicles which is not based on the simulation of open-loop manoeuvres, nor does it rely on the modelling of the driver as a control system. Instead, the essence of the method is the solution of a two-point optimal control boundary value problem, in which a vehicle, subject to physical constraints like tyre adherence and road borders, among others, is required to go between given initial and final positions as fast as possible. The control inputs - i.e., the driver's actions - that make the vehicle move between the two states in the most efficient way are found as a part of the solution procedure and represent the actions of a sort of ideal, perfect driver . The resulting motion is called the optimal manoeuvre and, besides being the most efficient way that the given vehicle has for travelling between the two points according to the chosen optimal criterion, may be taken as a reference for meaningful comparisons with other vehicles. The value of the penalty function, used to define the optimal condition occurring at the optimal manoeuvre, may be taken as a measure of manoeuvrability or handling. With this approach the manoeuvrability properties are established as intrinsic to the vehicle, being defined with respect to an ideal perfect driver. Some possible forms of the penalty function, which means slightly different concepts of manoeuvrability and handling, are discussed. In the end, the case of motorcycles and some examples of optimal manoeuvres are given.     

A General Method for the Evaluation of Vehicle Manoeuvrability with Special Emphasis on Motorcycles

This paper presents a novel approach to the assessment of the manoeuvrability of vehicles which is not based on the simulation of open-loop manoeuvres, nor does it rely on the modelling of the driver as a control system. Instead, the essence of the method is the solution of a two-point optimal control boundary value problem, in which a vehicle, subject to physical constraints like tyre adherence and road borders, among others, is required to go between given initial and final positions as fast as possible. The control inputs - i.e., the driver's actions - that make the vehicle move between the two states in the most efficient way are found as a part of the solution procedure and represent the actions of a sort of ideal, perfect driver. The resulting motion is called the optimal manoeuvre and, besides being the most efficient way that the given vehicle has for travelling between the two points according to the chosen optimal criterion, may be taken as a reference for meaningful comparisons with other vehicles. The value of the penalty function, used to define the optimal condition occurring at the optimal manoeuvre, may be taken as a measure of manoeuvrability or handling. With this approach the manoeuvrability properties are established as intrinsic to the vehicle, being defined with respect to an ideal perfect driver. Some possible forms of the penalty function, which means slightly different concepts of manoeuvrability and handling, are discussed. In the end, the case of motorcycles and some examples of optimal manoeuvres are given.     

A combined use of phase plane and handling diagram method to study the influence of tyre and vehicle characteristics on stability

This paper deals with in-curve vehicle lateral behaviour and is aimed to find out which vehicle physical characteristics affect significantly its stability. Two different analytical methods, one numerical (phase plane) and the other graphical (handling diagram) are discussed. The numerical model refers to the complete quadricycle, while the graphical one refers to a bicycle model. Both models take into account lateral load transfers and nonlinear Pacejka tyre–road interactions. The influence of centre of mass longitudinal position, tyre cornering stiffness and front/rear roll stiffness ratio on vehicle stability are analysed. The presented results are in good agreement with theoretical expectations about the above parameters influence, and show how some physical characteristics behave as saddle-node bifurcation parameters.     

Heavy duty vehicle rollover detection and active roll control

This paper presents the results of a comprehensive study on heavy-duty vehicle (HDV) roll stability improvement technology. The proposed rollover threat warning system uses the real-time dynamic model-based time-to-rollover (TTR) metric as a basis for online rollover detections. Its feasibility for implementation in a HDV rollover threat detection system is demonstrated through vehicle dynamic simulation studies. The research on the development of a rollover threat detection system is further enhanced in combination with an active roll control system using active suspension mechanism to improve heavy-duty trucks’ roll stability both in the static cornering and in emergency maneuvers. It has been demonstrated that the roll stability of typical heavy-duty trucks has been largely improved by the proposed active safety monitoring and control system.     

Development of a generalised equivalent estimation approach for multi-axle vehicle handling dynamics

This paper devotes analytical effort in developing the 2M equivalent approach to analyse both the effect of vehicle body roll and n-axle handling on vehicle dynamics. The 1M equivalent vehicle 2DOF equation including an equivalent roll effect was derived from the conventional two-axle 3DOF vehicle model. And the 1M equivalent dynamics concepts were calculated to evaluate the steady-state steering, frequency characteristics, and root locus of the two-axle vehicle with only the effect of body roll. This 1M equivalent approach is extended to a three-axle 3DOF model to derive similar 1M equivalent mathematical identities including an equivalent roll effect. The 1M equivalent wheelbases and stability factor with the effect of the third axle or body roll, and 2M equivalent wheelbase and stability factor including both the effect of body roll and the third-axle handling were derived to evaluate the steady-state steering, frequency characteristics, and root locus of the three-axle vehicle. By using the recursive method, the generalised 1M equivalent wheelbase and stability factor with the effect of n-axle handling and 2M equivalent generalised wheelbase and stability factor including both the effect of body roll and n-axle handling were derived to evaluate the steady-state steering, frequency characteristics, and root locus of the n-axle vehicle. The 2M equivalent approach and developed generalised mathematical handling concepts were validated to be useful and could serve as an important tool for estimating both the effect of vehicle body roll and n-axle handling on multi-axle vehicle dynamics.     

Modelling Combined Ride and Handling Manœuvres for a Vehicle with Slow-Active Suspension

SUMMARY

The computer modelling of vehicle ride and handling has been widely reported, but often only one or other of these functions is considered. This is especially true in the design of active suspension controllers, where the effects that improvements in the performance of one aspect have on the other are often not presented. This paper initially describes a combined ride and handling model for a large executive saloon fitted with a slow-active suspension. Separately derived ride and roll control strategies are combined and the effects on both ride and handling considered for straight running and various handling man?uvres on rough roads. The results are compared to the original passively suspended vehicle and the effect of running each strategy separately.     

Dynamics of Tracked Vehicles

This paper provides a brief review of the state-of-the-art of tracked vehicle dynamics, including mobility over soft terrain, ride dynamics over rough surfaces and manoeuvrability. It is found that considerable progress has been made in the development of analytical frameworks for evaluating and predicting tracked vehicle mobility over soft terrain, taking into account the characteristics of terrain response to normal and shear loading. Certain computer simulation models for tracked vehicle mobility have been gaining increasingly wide acceptance by industry and governmental agencies in product development and in procurement. It is also found that most of the research on tracked vehicle ride dynamics and manoeuvrability is confined to operations on rigid surfaces. To achieve a realistic evaluation and prediction of the dynamic behaviour of tracked vehicles in the field, the key is to have a better understanding of terrain response to dynamic vehicular loading, including its dynamic stiffness and damping. Challenges that face vehicle dynamicists in this emerging field are identified.     

Active Roll Control for Passenger Cars

The development of a mathematical model of a limited bandwidth hydro-pneumatic suspension that is incorporated into a vehicle handling model is described. The combined model is used to evaluate a suitable control strategy for eliminating body roll during a cornering manoeuvre. The philosophy behind the roll control strategy has been to use feedback measurements of the body motions which do not compromise the ride control. A study of the influence of the position of the body motion feedback transducer on the effectiveness of the system to reduce the body roll is presented. Non-linear modelling of the suspension components for a 0.8g cornering manoeuvre has revealed performance limitations. Conclusions are drawn as to the effectiveness of the control scheme.     

Dynamics of Tracked Vehicles

SUMMARY

This paper provides a brief review of the state-of-the-art of tracked vehicle dynamics, including mobility over soft terrain, ride dynamics over rough surfaces and manoeuvrability. It is found that considerable progress has been made in the development of analytical frameworks for evaluating and predicting tracked vehicle mobility over soft terrain, taking into account the characteristics of terrain response to normal and shear loading. Certain computer simulation models for tracked vehicle mobility have been gaining increasingly wide acceptance by industry and governmental agencies in product development and in procurement. It is also found that most of the research on tracked vehicle ride dynamics and manoeuvrability is confined to operations on rigid surfaces. To achieve a realistic evaluation and prediction of the dynamic behaviour of tracked vehicles in the field, the key is to have a better understanding of terrain response to dynamic vehicular loading, including its dynamic stiffness and damping. Challenges that face vehicle dynamicists in this emerging field are identified.     

汽车主动悬架与电动助力转向系统自适应模糊集成控制

建立了包含转向运动模型、俯仰运动模型和侧倾运动模型的汽车整车模型,在设计了电动助力转向系统PD控制的基础上,构建了基于自适应模糊控制的汽车主动悬架与电动助力转向系统集成控制器,当控制系统偏差变小或变大时,调整因子总能保证系统稳定,便于工程应用。计算结果表明,该自适应模糊集成控制策略,既保证了车辆操纵轻便性,又显著提高了整车操纵稳定性、安全性和行驶平顺性等整车综合性能。     

Active Roll Control of Articulated Vehicles

This paper describes an investigation into active roll control of articulated vehicles. The objective is to minimise lateral load transfer using anti-roll bars incorporating low bandwidth hydraulic actuators. Results from handling tests performed on an articulated vehicle are used to validate a nonlinear yaw/roll model of the vehicle. The methodology used to design lateral acceleration controllers for vehicles equipped with active anti-roll bars is developed using a simplified linear articulated vehicle model. The hardware limitations and power consumption requirements of the active elements are studied. The controller is then implemented in the validated articulated vehicle model to evaluate the performance of an articulated lorry with active anti-roll bars. The simulation results demonstrate the possibility of a significant improvement in transient roll performance of the vehicle, using a relatively low power system (10 kW), with low bandwidth actuators (5 Hz).     

Development and Simulation of a Novel Roll Control System for the Interconnected Hydragas® Suspension

The design of passive suspension systems using conventional springs and dampers is limited by the need to compromise between vehicle ride and handling functions. The Interconnected Hydragas Suspension fitted to the current Rover 100 series partially allays this compromise by reducing the vehicle pitch stiffness witfiout affecting the bounce and roll stiffnesses. However, the vehicle body is still subject to roll during cornering manoeuvres. This paper outlines the development and simulation of a sealed low bandwidth active roll control suspension based on the existing Interconnected Hydragas System. Following a brief explanation of the Hydragas suspension operating principle die paper outlines the design of a fluid displacer or 'shuttle'. This shuttle enables control over body roll during manoeuvres by displacing fluid from one side of the car to the other. Care is taken to ensure low power consumption whilst the sealed nature of the fluid based suspension units guarantee reliable operation without leakage. Using computer simulation, the system performance is predicted and compared with experimental measurements. It is shown that roll during manoeuvres can be reduced or eliminated using a minimum of hydraulic components with only moderate power consumption and cost.     

Handling and safety enhancement of race cars using active aerodynamic systems

A methodology is presented in this work that employs the active inverted wings to enhance the road holding by increasing the downward force on the tyres. In the proposed active system, the angles of attack of the vehicle's wings are adjusted by using a real-time controller to increase the road holding and hence improve the vehicle handling. The handling of the race car and safety of the driver are two important concerns in the design of race cars. The handling of a vehicle depends on the dynamic capabilities of the vehicle and also the pneumatic tyres’ limitations. The vehicle side-slip angle, as a measure of the vehicle dynamic safety, should be narrowed into an acceptable range. This paper demonstrates that active inverted wings can provide noteworthy dynamic capabilities and enhance the safety features of race cars. Detailed analytical study and formulations of the race car nonlinear model with the airfoils are presented. Computer simulations are carried out to evaluate the performance of the proposed active aerodynamic system.     

An Experimental Study of a Prototype Active Anti-Roll Suspension System

Active roll control is known to offer substantial improvements in ride and handling performance over the most sophisticated passive suspension systems. However although many different active suspension systems have been discussed and analysed through simulation little information regarding experimental performance data from a prototype active roll control system has been published. This study focuses on the design, development, commissioning and experimental evaluation of a roll control suspension based on active anti-roll bar actuation. In tests, the prototype vehicle demonstrated excellent steady state and dynamic roll cancellation within the lateral acceleration range of 0.5g. Subjective assessments of the system confirmed the benefits of a level ride together with the added benefit accrued from the elimination of roll dynamics.     

Active Roll Control for Passenger Cars

SUMMARY

The development of a mathematical model of a limited bandwidth hydro-pneumatic suspension that is incorporated into a vehicle handling model is described. The combined model is used to evaluate a suitable control strategy for eliminating body roll during a cornering manoeuvre. The philosophy behind the roll control strategy has been to use feedback measurements of the body motions which do not compromise the ride control. A study of the influence of the position of the body motion feedback transducer on the effectiveness of the system to reduce the body roll is presented. Non-linear modelling of the suspension components for a 0.8g cornering manoeuvre has revealed performance limitations. Conclusions are drawn as to the effectiveness of the control scheme.     

Analysis and optimization of air suspension system with independent height and stiffness tuning

Suspensions play a crucial role in vehicle comfort and handling. Different types of suspensions have been proposed to address essential comfort and handling requirements of vehicles. The conventional air suspension systems use a single flexible rubber airbag to transfer the chassis load to the wheels. In this type of air suspensions, the chassis height can be controlled by further inflating the airbag; however, the suspension stiffness is not controllable, and it depends on the airbag volume and chassis load. A recent development in a new air suspension includes two air chambers (rubber airbags), allowing independent ride height and stiffness tuning. In this air suspension system, stiffness and ride height of the vehicle can be simultaneously altered for different driving conditions by controlling the air pressure in the two air chambers. This allows the vehicle’s natural frequency and height to be adjusted according to the load and road conditions. This article discusses optimization of an air suspension design with ride height and stiffness tuning. An analytical formulation is developed to yield the optimum design of the new air suspension system. Experimental results verify the mathematical modeling and show the advantages of the new air suspension system.     

车辆系统垂向与横向耦合的侧倾状态估计

为有效解决复杂行驶工况下车辆耦合侧倾运动状态无法精确获取,进而对车辆系统操纵稳定性与乘坐舒适性兼顾优化无法提供准确输入的难题,本文中设计了基于车辆垂向与横向耦合动力学的双非线性状态观测器算法,以实现复杂行驶工况下车辆耦合侧倾运动状态的实时准确估计。首先,建立了路面激励模型与整车系统垂向与横向耦合动力学模型;接着,利用无迹卡尔曼滤波方法(UKF)与非线性模糊观测(T-S)理论,设计了非线性状态观测算法,以在不同路面激励工况下对车辆系统簧载质量与侧倾状态进行联合估计;最后,运用CarSim■动力学软件,对比分析了在标准A级与C级路面上进行J-turn试验工况下,采用联合状态观测器(UKF&T-S)实时估计车辆侧倾角与侧倾率的观测精度。结果表明,本文所设计的UKF&T-S观测器可有效估计车辆侧倾状态,且与CarSim■仿真数据相比识别状态标准偏差不超过10%。     

Investigation of active torsion bar actuator configurations to reduce vehicle body roll

The increasing popularity of sport utility/light-duty vehicles has prompted the investigation of active roll management systems to reduce vehicle body roll. To minimize vehicle body roll and improve passenger comfort, one emerging solution is an active torsion bar control system. The validation of automotive safety systems requires analytical evaluation and laboratory testing prior to implementation on an actual vehicle. In this article, a computer simulation tool and accompanying hardware-in-the-loop test environment are presented for active torsion bar systems to study component configurations and performance limits. The numerical simulation illustrates that the hydraulic cylinder extension limits the active torsion system’s ability to provide body roll angle reduction under various driving conditions. To compare the control system’s time constant and body roll minimization capabilities for different hydraulic valve assemblies and equivalent hose lengths, an experimental test stand was created. For a typical hydraulic pressure and hose diameter, the equivalent hose length was not a key design variable that impacted the system response time. However, the servo-valve offered a quicker transient response and smoother steady-state behavior than the solenoid poppet actuators that may increase occupant safety and comfort.     

Comparing rear wheel steering and rear active differential approaches to vehicle yaw control

A comparison between two different approaches to vehicle stability control is carried out, employing a robust non-parametric technique in the controller design. In particular, an enhanced internal model control strategy, together with a feedforward action and a suitably generated reference map, is employed for the control of a vehicle equipped either with a rear wheel steering (RWS) system or with a rear active differential (RAD) device. The uncertainty arising from the wide range of operating conditions is described by an additive model set employed in the controller design. Extensive steady state and transient tests simulated with an accurate 14 degrees of freedom nonlinear model of the considered vehicle show that both systems are able to improve handling and safety in normal driving conditions. RAD devices can make the vehicle reach higher lateral acceleration values but they achieve only slight stability improvements against oversteer. On the other hand, 4WS systems can greatly improve both vehicle safety and manoeuvrability in all driving situations, making this device an interesting and powerful stability system.