壁厚所致几何不连续性对卷管法安装管道的影响

对于深水管道,止屈器起到了很好的防止屈曲传播的作用,但是在卷管法安装中,管道在上卷和退卷的过程中将产生塑性变形,而由于止屈器导致的管道壁厚几何不连续性将使局部管段的变形增大,可能加剧塑性变形的影响。针对这个问题,建立ABAQUS非线性有限元模型模拟管道安装过程,研究上述问题对卷管、铺管中管道性能的影响并作参数敏感性分析。结果表明:壁厚所致几何不连续性的存在导致卷管安装时管道局部曲率和应变明显增大;增加回拉力可降低上述不连续性的影响,但管道残余椭圆度也将增加;增大卷筒半径或减小管道直径将使不连续性的影响降低;增大管道壁厚可降低不连续性的影响,但会增加建造成本。文章研究结论可为卷管法安装中管道设计提供理论指导。     

壁厚所致几何不连续性对卷管法安装管道的影响

对于深水管道,止屈器起到了很好的防止屈曲传播的作用,但是在卷管法安装中,管道在上卷和退卷的过程中将产生塑性变形,而由于止屈器导致的管道壁厚几何不连续性将使局部管段的变形增大,可能加剧塑性变形的影响。针对这个问题,建立ABAQUS非线性有限元模型模拟管道安装过程,研究上述问题对卷管铺管中管道性能的影响并作参数敏感性分析。结果表明,壁厚所致几何不连续性的存在导致卷管安装时管道局部曲率及应变明显增大;回拉力、管径与卷筒直径之比及管道壁厚等参数也将产生影响。另外,增加回拉力可降低上述不连续性的影响,但管道残余椭圆度也将增加;增大卷筒半径（或减小管道直径）将使不连续性的影响降低;增大管道壁厚可降低不连续性影响,但随之建造成本也将增加。本文研究结论可为卷管法安装中管道设计提供理论指导。     

考虑铺设残余变形影响的管道屈曲分析

文章基于壳单元建立了精细的托管架—管道相互作用模型,模拟了S型管道铺设过程,研究了铺设过程中管道的塑性变形分布,评价了铺设残余塑性变形对管道屈曲压力的影响。研究结果表明在深水S型铺设中,管道会发生明显残余塑性变形,并削弱管道的后续屈曲承载能力。     

导弹战斗部冲击下舷侧梁的动力响应及失效模式分析

根据理想刚-塑性材料模型假设,同时考虑梁的剪切、弯曲及拉伸,分析了均匀矩形截面简支梁中部在中低速、大尺寸、大质量、平头弹体正冲击下的动力响应,得到了梁的初始塑性变形模式及梁的塑性变形过程,并根据有效塑性应变失效准则,分析了简支梁的失效模式,得到了冲击过程中梁的临界失效挠度及吸能量,讨论了梁截面的形状及跨长对梁变形吸能能力的影响.     

压力载荷下非粘结柔性立管应变影响因素分析

基于Abaqus/Explicit准静态和质量放大方法研究了一类典型非粘结柔性立管在压力载荷作用下应变响应特性,对影响立管整体轴向延伸率和绕轴向扭转角度的因素进行了分析。数值模型计入金属层实际截面形状、铺设角度以及几何、接触、材料非线性。计算结果表明：数值解与理论值吻合较好;立管端部边界条件对轴向延伸率影响不大但对绕轴向扭转角度影响较大;抗压铠装层为径向压力主要受力构件,其铺设角度虽然对压溃性能不大,但在应变分析中不可忽略;拉伸铠装层铺设角度对应变影响同样较大。文中数值方法可弥补理论方法限定在小位移、小变形范围,无法计入层间摩擦、材料非线性及初始制造椭圆率等缺陷。     

压力载荷下非粘结柔性立管应变影响因素分析（英文）

基于Abaqus/Explicit准静态和质量放大方法研究了一类典型非粘结柔性立管在压力载荷作用下应变响应特性,对影响立管整体轴向延伸率和绕轴向扭转角度的因素进行了分析。数值模型计入金属层实际截面形状、铺设角度以及几何、接触、材料非线性。计算结果表明:数值解与理论值吻合较好;立管端部边界条件对轴向延伸率影响不大但对绕轴向扭转角度影响较大;抗压铠装层为径向压力主要受力构件,其铺设角度虽然对压溃性能不大,但在应变分析中不可忽略;拉伸铠装层铺设角度对应变影响同样较大。文中数值方法可弥补理论方法限定在小位移、小变形范围,无法计入层间摩擦、材料非线性及初始制造椭圆率等缺陷。     

冷态反敲法在舰船艉轴校直中的应用

为解决舰船艉轴加工、装配过程中发生弯曲问题,提出应用冷态校直—冷态反敲法来解决舰船艉轴弯曲问题,通过实例详细阐述运用冷态反敲法在细长艉轴和空心艉轴校直过程中的成功应用,论证冷态反敲法在解决舰船艉轴弯曲问题的可行性。     

一种卷筒式铺管法计算分析技术

卷筒式铺管法对于小管径海底管道铺设有着较大优势,可将海上船舶焊接施工的工作量转移至陆上完成。本文首先从铺设工艺角度进行说明,然后对卷筒式铺管的关键卷管计算进行理论分析和设计流程,最后重点针对南海深水项目的外输管道采用Apache公司船舶作为目标船舶,采用理论方法和Pipelay软件进行分析的计算模拟。通过计算模拟的过程,总结出卷筒式铺管法的计算分析技术。     

基于管道极限承载能力分析的深水S型铺管托管架基本设计研究

S型铺管托管架是铺管系统中的重要装备,起到支撑管道和引导管道入水的作用。其基本设计流程是一个复杂的循环过程,涉及铺管船推进力、张紧器张力、待铺设管道的尺寸和铺设水深等诸多参数的平衡和优选。本文基于下弯段管道在弯曲、拉伸和外压综合荷载作用下的极限承载能力分析,求解了铺管船推进力和张紧器拉力,并以此为边界条件推导了托管架长度的参数公式。以2500米水深铺设12英寸管道为例计算了所需的托管架曲率半径和设计长度,该计算方法可为S型铺管船托管架的基本设计提供参考。     

基于有限元技术的海底电缆铺设机械结构损伤分析

随着人们对海洋的广泛利用,海底电缆的铺设工程对海洋的开发及使用有着极其重要的作用。在铺设过程中海底电缆的弯曲是引起机械结构损伤的主要原因之一。为此,本文利用ANSYS软件建立了海底电缆的有限元模型,选用SOLID164和SHELL163单元并利用ALE算法对该模型进行仿真计算。通过对仿真结果进行数据提取,获得了海底电缆的位移及应力数据,为海底电缆弯曲特性及铺设过程中的机械结构损伤研究提供了参考。     

Errata

正In the paper"Influence of Fouling Assemblage on the Corrosion Behaviour of Mild Steel in the Coastal Waters of The Gulf of Mannar,India"in Vol.12,No.4,Page:509,References were lost,and the two authors’biographies were identical.The correct text is shown below.We apologize to the authors and our readers for any inconvenience caused by the errors.     

Journal of Marine Science and Application 2014 Sum. Contents

正~~     

第34届海洋、离岸及极地工程国际会议(英文)

正St.John's,Newfoundland,Canada,May 31-June 5,2015 OMAE2015 is the ideal forum for researchers,engineers,managers,technicians and students from the scientific and industrial communities from around the world to: meet and present advances in technology and its scientific support;     

联合作战计划和执行系统

全球指挥控制系统(GCCS)实施当前美国海军网络中心战信息基础设施的联合计划网络。联合作战计划和执行系统(JOPES)支持GCCS实现联合计划。JOPES有两类计划：时间不限的精密预案计划生成作战计划、方案计划或职能计划；时间敏感的危机行动计划生成作战命令或战役方案。前者在和平时期创建的作战计划是后者的计划基础，加速应付危机的能力。     

Eastbound or westbound ?

In terms of equal sailing distances, where is the inflexion when ships depart from ports in the Asian Continent to New York via Suez and/or Panama？
The answer is China South Port Group （Hong Kong, Shenzhen and Guangzhou）.     

Recent progress on wave induced loading measurements in warships

Recent measurements of wave induced hull strain and flexure in RN warships are presented together with the derivation of the current design criteria for extreme hull girder bending loads. The history of the development of the shipboard instrumentation used is given and recent developments to improve the quality and ease of analysis of the data are described. An unexpectedly high transverse asymmetry in the longitudinal strains measured in destroyers is shown to be the result of a combination of vertical and lateral bending in oblique seas. Finally recent theoretical comparisons between the loading of Deep-Vee hulls and conventional UK rounded bilge hulls are presented which demonstrate the higher loading experienced by this type of hull form.     

桥梁防撞设施物理模型试验

物理模型试验是预报防撞设施所受撞击力及优化设计方案的主要方法之一。结合杭州湾大桥柔性防撞设施及东海大桥独立式防撞体设计方案,阐述了船—防撞体撞击试验的基本原理、方法、试验方案及相关试验结果。提出了柔性防撞系统的优化方案。试验结果表明,该方案经济有效,可供预报类似桥梁防撞设施撞击力时参考。     

印尼某电厂码头水工建筑物设计

印尼某电厂项目码头水工建筑物包括码头、防波堤和护岸等主要组成部分。在该项目水工建筑物的设计过程中,综合考虑当地的自然条件、施工能力和材料来源等因素,不断优化结构选型和结构断面。根据不同使用要求,护岸分别采用直立式和斜坡式2种结构型式,推荐的设计方案节省投资、施工方便,可供同类工程设计参考。     

Impact of regulation on the performances of long-distance transport services: A comparison of the different approaches in Sweden and Norway

Despite the many socio-economic similarities between Sweden and Norway, differences in jurisdiction, organisation, cooperation, and financing of long-distance passenger train and coach services have led to the development of four distinctively different ways of serving the markets. This paper describes how the train and coach markets have developed in the two countries, with emphasis on regulatory and industrial structure and a couple of performance variables.Looking at passenger rail, both countries separated infrastructure from operation over a decade ago. However, while Norwegian rail is characterised by an almost monopoly supplier, rail services in Sweden are partly decentralised to the responsibility of county authorities and are widely subjected to competitive tendering. The rest of the network is about to be opened up for on-the-track competition. Swedish Rail (SJ) has spent the last decades consolidating its core business (passenger rail) and sold out its other businesses. In contrast, the Norwegian state rail (NSB) has expanded its business to become a major bus operator and property owner, with extensions also into the Swedish market.The coach industry was more recently deregulated in both countries. The Swedish coach market is dominated by privately owned companies operating services to and from Stockholm. In Norway, state-owned NSB is a major coach operator on medium distance routes, and is also the largest partner of Nor-Way Bussekspress which totally dominates long-distance coach services. Further, the Norwegian coach market is characterised by cross-ownership and cooperation which has enabled an extensive route network which covers most of Norway.We find distinct differences in achievements in the two modes and in the two countries. Swedish rail services have succeeded in winning market shares and in renewing and developing both infrastructure and service levels to a greater extent than the Norwegian model. On the other hand, the Norwegian coach market seems to be more developed and efficient compared to its Swedish counterpart.The paper concludes with a discussion on the possible links between the different approaches and the performance observed, with the aim to stimulate further and more detailed research on some important issues.     

开放式数据挖掘系统模型

目前国内已经出现了少量的数据挖掘相关产品。国内数据挖掘软件无论从数量还是质量上比较，都与国外软件存在着较大的差距。随着数据仓库技术的普及，数据挖掘应用的需求越来越强烈，如何缩短这种差距，研发数据挖掘软件产品成为国内业界的一个重要问题。通过引用目前国际通用数据挖掘标准技术来构建开放式的数据挖掘系统模型，该系统模型从可扩展性、可重用性、易用性等方面得到了加强。