Contour line of load transfer ratio for vehicle rollover prediction

For vehicle rollover control systems, an accurate and predictive rollover index is necessary for a precise rollover threat detection and rollover prevention. In this paper, the contour line of load transfer ratio (CL-LTR) and the CL-LTR-based vehicle rollover index (CLRI) are proposed, describing LTR threshold and LTR change rate precisely, providing an accurate prediction of vehicle rollover threat. In detail, the CL-LTR is proposed via the roll dynamics phase plane analysis, and its analytical solution of one-degree-of-freedom vehicle roll model and extension for full vehicle are derived. Moreover, the predictive CLRI is proposed and evaluated via vehicle dynamics study. The results demonstrate that vehicle rollover threat is predicted accurately based on the CLRI, which shows benefits for the vehicle rollover prediction and stability control.     

Rollover detection and control on the non-driven axles of trucks based on pulsed braking excitation

The major challenges for rollover detection are the accurate modelling of vehicle dynamics and the real-time estimation of the varied parameters. To circumvent the dependence on vehicle parameters, a novel rollover detection method based on the pulsed braking excitation is proposed. With the lateral load transfer ratio (LTR), the relationship between rollover risks and non-driven wheel rotational dynamics is deduced, which is the basis to apply braking excitation on wheels. The lateral acceleration is adopted as the first criterion to activate the rollover detection. Once the pulsed braking is applied to the non-driven wheels, the braking pressure and wheel angular speeds are measured to estimate the LTR on the non-driven axle. In case of emergency, the differential braking-based anti-rollover is implemented. Experiments were conducted on a Hardware-in-Loop bench. The results show that, the pulsed braking can be activated timely, and the LTR on the non-driven axle is estimated accurately. With the anti-rollover control, the roll stability is improved considerably.     

Modeling to Predict Rollover Threat of Tractor-Semitrailers

Summary A predictive model to determine a rollover threat index associated with tractor-semitrailers is proposed. The purpose of this model is to predict the rollover threat sufficiently in advance of the actual event so as to enable the driver to react accordingly. The predictive model is established using simple roll-plane models of the vehicle sprung and unsprung masses in conjunction with online vehicle parameter identification. Using this predictive model, the predicted Load Transfer Ratio (LTR) for the trailer axle can be determined as the rollover threat index. The proposed predictive model and the associated parameter-identification algorithm are verified using a 12-degree-of-freedom vehicle model. It is shown that the identified parameter values are close to the actual ones used in detailed simulation study. Similarly it is shown that the predicted values of the LTR are close to the simulated ones, and hence the proposed approach is potentially suitable as the basis for application in rollover threat assessment.     

Design of a rollover index-based vehicle stability control scheme

This paper presents a rollover index (RI)-based vehicle stability control (VSC) scheme. A rollover index, which indicates an impending rollover, is developed by a roll dynamics phase plane analysis. A model-based roll estimator is designed to estimate the roll angle and roll rate of the vehicle body with lateral acceleration, yaw rate, steering angle and vehicle velocity measurements. The rollover index is computed using an estimated roll angle, estimated roll rate, measured lateral acceleration and time-to-wheel lift. A differential braking control law is designed using a direct yaw control method. The VSC threshold is determined from the rollover index. The effectiveness of the RI, the performance of the estimator and the control scheme are investigated via simulations using a validated vehicle simulator. It is shown that the proposed RI can be a good measure of the danger of rollover and the proposed RI-based VSC scheme can reduce the risk of a rollover.     

Stability and optimised H∞ control of tripped and untripped vehicle rollover

Vehicle rollover is a serious traffic accident. In order to accurately evaluate the possibility of untripped and some special tripped vehicle rollovers, and to prevent vehicle rollover under unpredictable variations of parameters and harsh driving conditions, a new rollover index and an anti-roll control strategy are proposed in this paper. Taking deflections of steering and suspension induced by the roll at the axles into consideration, a six degrees of freedom dynamic model is established, including lateral, yaw, roll, and vertical motions of sprung and unsprung masses. From the vehicle dynamics theory, a new rollover index is developed to predict vehicle rollover risk under both untripped and special tripped situations. This new rollover index is validated by Carsim simulations. In addition, an H-infinity controller with electro hydraulic brake system is optimised by genetic algorithm to improve the anti-rollover performance of the vehicle. The stability and robustness of the active rollover prevention control system are analysed by some numerical simulations. The results show that the control system can improve the critical speed of vehicle rollover obviously, and has a good robustness for variations in the number of passengers and longitude position of the centre of gravity.     

Vehicle dynamic estimation with road bank angle consideration for rollover detection: theoretical and experimental studies

This article describes a method of vehicle dynamics estimation for impending rollover detection. This method is evaluated via a professional vehicle dynamics software and then through experimental results using a real test vehicle equipped with an inertial measurement unit. The vehicle dynamic states are estimated in the presence of the road bank angle (as a disturbance in the vehicle model) using a robust observer. The estimated roll angle and roll rate are used to compute the rollover index which is based on the prediction of the lateral load transfer. In order to anticipate the rollover detection, a new method is proposed in order to compute the time-to-rollover using the load transfer ratio. The used nonlinear model is deduced from the vehicle lateral dynamics and is represented by a Takagi–Sugeno (TS) fuzzy model. This representation is used in order to take into account the nonlinearities of lateral cornering forces. The proposed TS observer is designed with unmeasurable premise variables in order to consider the non-availability of the slip angles measurement. Simulation results show that the proposed observer and rollover detection method exhibit good efficiency.     

半挂汽车列车高速公路弯道下坡路段运行安全研究（双语出版）

为提升半挂汽车列车在高速公路弯道下坡路段的运行安全，采用TruckSim仿真软件，构建了车辆模型、道路模型和驾驶人动力学仿真模型；基于蒙特卡罗可靠性分析法，分别建立了半挂汽车列车发生侧滑失效、侧翻失效、折叠失效和系统失效的功能函数，并选取设计速度80 km·h^-1的高速公路为研究路段，通过进行大量车辆动力学仿真试验，对不同圆曲线半径、纵坡坡度、路面附着系数、车速和车辆总质量对半挂汽车列车的运行安全的影响进行了数值分析。研究结果表明：半挂汽车列车发生侧滑和侧翻的概率随着圆曲线半径的增加而显著降低，在一般最小半径400 m的情况下，半挂汽车列车发生侧滑失效和侧翻失效的概率趋近于0；随着下坡坡度的增加，半挂汽车列车发生侧滑失效和侧翻失效的概率基本呈线性增长趋势；车速对于半挂汽车列车运行安全的影响尤为显著，当车速均值由60 km·h^-1增加到90 km·h^-1时，发生侧滑失效和侧翻失效的概率分别增加了634倍和336倍；车辆总质量的增加对半挂汽车列车侧翻有显著影响；在路面附着系数较低的条件下，半挂汽车列车的主要事故形态为侧滑和折叠，在路面附着系数较高的情况下，半挂汽车列车的主要事故形态为侧翻。因此，在道路设计中，应避免极限最小半径与陡坡组合，严格限速和限载可确保半挂汽车列车的运行安全性能。     

基于制动与悬架系统的车辆主动侧翻控制的研究

为提高车辆抗侧翻能力,建立了10自由度整车侧翻动力学模型,应用车辆动力学和轮胎力耦合特性,提出了一种基于差动制动和半主动悬架协同工作的车辆主动抗侧翻控制策略。通过对制动力矩的差动调节和半主动悬架阻尼力的适时匹配,实现对车辆侧翻的有效控制。根据子系统运动特性,设计了制动系统基于滑移率的积分滑模控制器和悬架系统灰模糊控制器。分别对制动、悬架控制及综合控制进行的鱼钩试验仿真结果表明,综合控制策略可有效降低危险时域车辆的侧倾角,相对于单一系统控制进一步提高了车辆抗侧翻能力。     

Active roll control for rollover prevention of heavy articulated vehicles with multiple-rollover-index minimisation

This paper presents the application of a nominal control design algorithm for rollover prevention of heavy articulated vehicles with active anti-roll-bar control. This proposed methodology is based on an extension of linear quadratic regulator control for ‘state derivative-induced (control coupled) output regulation’ problems. For heavy articulated vehicles with multiple axles, a performance index with multiple rollover indices is proposed. The proposed methodology allows us to compare the usefulness of various control configurations (i.e. actuators at different axles of the vehicle) based on the interaction of this control configuration with vehicle dynamics. Application of this methodology to a specific heavy articulated vehicle with a tractor semi-trailer shows that a single active anti-roll-bar system at the trailer unit gives better performance than multiple-axle actuators at tractor and trailer together with the single lane change manoeuvre as the external disturbance. Thus, the proposed methodology of this paper not only highlights the importance of the interactions between control and vehicle dynamics in rollover prevention problems but, in fact, proposes a novel technique to exploit the benefits of these interactions judiciously.     

Bus mathematical model of acceleration threshold limit estimation in lateral rollover test

Vehicle safety is a major concerns for researchers, governments and vehicle manufacturers, and therefore a special attention is paid to it. Particularly, rollover is one of the types of accidents where researchers have focused due to the gravity of injuries and the social impact it generates. One of the parameters that define bus lateral behaviour is the acceleration threshold limit, which is defined as the lateral acceleration from which the rollover process begins to take place. This parameter can be obtained by means of a lateral rollover platform test or estimated by means of mathematical models. In this paper, the differences between these methods are deeply analysed, and a new mathematical model is proposed to estimate the acceleration threshold limit in the lateral rollover test. The proposed model simulates the lateral rollover test, and, for the first time, it includes the effect of a variable position of the centre of gravity. Finally, the maximum speed at which the bus can travel in a bend without rolling over is computed.     

An improvement in rollover detection of articulated vehicles using the grey system theory

A Rollover Index combined with the grey system theory, called a Grey Rollover Index (GRI), is proposed to assess the rollover threat for articulated vehicles with a tractor–semitrailer combination. This index can predict future trends of vehicle dynamics based on current vehicle motion; thus, it is suitable for vehicle-rollover detection. Two difficulties are encountered when applying the GRI for rollover detection. The first difficulty is effectively predicting the rollover threat of the vehicles, and the second difficulty is achieving a definite definition of the real rollover timing of a vehicle. The following methods are used to resolve these problems. First, a nonlinear mathematical model is constructed to accurately describe the vehicle dynamics of articulated vehicles. This model is combined with the GRI to predict rollover propensity. Finally, TruckSim^? software is used to determine the real rollover timing and facilitate the accurate supply of information to the rollover detection system through the GRI. This index is used to verify the simulation based on the common manoeuvres that cause rollover accidents to reduce the occurrence of false signals and effectively increase the efficiency of the rollover detection system.     

Integration of vehicle yaw stabilisation and rollover prevention through nonlinear hierarchical control allocation

This work presents an approach to rollover prevention that takes advantage of the modular structure and optimisation properties of the control allocation paradigm. It eliminates the need for a stabilising roll controller by introducing rollover prevention as a constraint on the control allocation problem. The major advantage of this approach is the control authority margin that remains with a high-level controller even during interventions for rollover prevention. In this work, the high-level control is assigned to a yaw stabilising controller. It could be replaced by any other controller. The constraint for rollover prevention could be replaced by or extended to different control objectives. This work uses differential braking for actuation. The use of additional or different actuators is possible. The developed control algorithm is computationally efficient and suitable for low-cost automotive electronic control units. The predictive design of the rollover prevention constraint does not require any sensor equipment in addition to the yaw controller. The method is validated using an industrial multi-body vehicle simulation environment.     

Coordinated control strategies for active steering,differential braking and active suspension for vehicle stability,handling and safety improvement

ABSTRACT

In this paper, a coordinated control strategy is proposed to provide an effective improvement in handling stability of the vehicle, safety, and comfortable ride for passengers. This control strategy is based on the coordination among active steering, differential braking, and active suspension systems. Two families of controllers are used for this purpose, which are the high order sliding mode and the backstepping controllers. The control strategy was tested on a full nonlinear vehicle model in the environment of MATLAB/Simulink. Rollover avoidance and yaw stability control constraints have been considered. The control system mainly focuses on yaw stability control. When rollover risk is detected, the proposed strategy controls the roll dynamics to decrease rollover propensity. Simulation results for two different critical driving scenarios, the first one is a double lane change and the other one is a J-turn manoeuvre, show the effectiveness of the coordination strategy in stabilising the vehicle, enhancing handling and reducing rollover propensity.     

Path-following in model predictive rollover prevention using front steering and braking

In this paper vehicle path-following in the presence of rollover risk is investigated. Vehicles with high centre of mass are prone to roll instability. Untripped rollover risk is increased in high centre of gravity vehicles and high-friction road condition. Researches introduce strategies to handle the short-duration rollover condition. In these researches, however, trajectory tracking is affected and not thoroughly investigated. This paper puts stress on tracking error from rollover prevention. A lower level model predictive front steering controller is adopted to deal with rollover and tracking error as a priority sequence. A brake control is included in lower level controller which directly obeys an upper level controller (ULC) command. The ULC manages vehicle speed regarding primarily tracking error. Simulation results show that the proposed control framework maintains roll stability while tracking error is confined to predefined error limit.     

Measurement of roof deformation caused by vehicle rollover

A vehicle rollover is a critical accident that could have many causes. This paper describes a novel vision-based system for measuring vehicle roof deformation due to a rollover accident. A vision-based measurement system offers an overall view of structural deformation simply at low cost. Our measurement system was constructed using a Kinect camera from Microsoft, a battery, and a remote-controlled recording computer. Color images and distance maps can be obtained using two sensors embedded in the Kinect along with customized software, and the distance from the camera lens to a specific object can be calculated with a simple equation. To test our proposed approach, actual vehicle rollover experiments were conducted and the resulting roof deformations were compared to those indicated by our system. Moreover, cross-sectional image of Apillar was analyzed to calculate bending moment of inertia. From the research results, it was able to show that deformation errors were within 13 mm, and roof deformation was correlated with vehicle type, or vehicle curb weight.     

Roll Dynamics of Commercial Vehicles

An analytical model is developed here for studying the roll dynamics of commercial vehicles. Large displacements and rotations are accounted for in this nonlinear model so that it can be used for the study of roll dynamics well beyond the limits of wheel lift-off. The model is used to illustrate some of the dynamic phenomena in vehicle rollover, especially the interactive coupling between the roll and the vertical modes of motion. The influence of suspension backlash on rollover resistance is demonstrated, and the phenomenon of roll motion resonance is illustrated to suggest new means for evaluating vehicle rollover sensitivity.     

Heavy duty vehicle rollover detection and active roll control

This paper presents the results of a comprehensive study on heavy-duty vehicle (HDV) roll stability improvement technology. The proposed rollover threat warning system uses the real-time dynamic model-based time-to-rollover (TTR) metric as a basis for online rollover detections. Its feasibility for implementation in a HDV rollover threat detection system is demonstrated through vehicle dynamic simulation studies. The research on the development of a rollover threat detection system is further enhanced in combination with an active roll control system using active suspension mechanism to improve heavy-duty trucks’ roll stability both in the static cornering and in emergency maneuvers. It has been demonstrated that the roll stability of typical heavy-duty trucks has been largely improved by the proposed active safety monitoring and control system.     

Analysis of vehicle rollover dynamics using a high-fidelity model

Recent data show that 35% of fatal crashes in sport utility vehicles included vehicle rollover. At the same time, experimental testing to improve safety is expensive and dangerous. Therefore, multi-body simulation is used in this research to improve the understanding of rollover dynamics. The majority of previous work uses low-fidelity models. Here, a complex and highly nonlinear multi-body model with 165 degrees of freedom is correlated to vehicle kinematic and compliance (K&C) measurements. The Magic Formula tyre model is employed. Design of experiment methodology is used to identify tyre properties affecting vehicle rollover. A novel, statistical approach is used to link suspension K&C characteristics with rollover propensity. Research so far reveals that the tyre properties that have the greatest influence on vehicle rollover are friction coefficient, friction variation with load, camber stiffness and tyre vertical stiffness. Key K&C characteristics affecting rollover propensity are front and rear suspension rate, front roll stiffness, front camber gain, front and rear camber compliance and rear jacking force.     

Vehicle dynamics and road curvature estimation for lane departure warning system using robust fuzzy observers: experimental validation

This paper describes a new approach to estimate vehicle dynamics and the road curvature in order to detect vehicle lane departures. This method has been evaluated through an experimental set-up using a real test vehicle equipped with the RT2500 inertial measurement unit. Based on a robust unknown input fuzzy observer, the road curvature is estimated and compared to the vehicle trajectory curvature. The difference between the two curvatures is used by the proposed lane departure detection algorithm as the first driving risk indicator. To reduce false alarms and take into account driver corrections, a second driving risk indicator based on the steering dynamics is considered. The vehicle nonlinear model is deduced from the vehicle lateral dynamics and road geometry and then represented by an uncertain Takagi–Sugeno fuzzy model. Taking into account the unmeasured variables, an unknown input fuzzy observer is proposed. Synthesis conditions of the proposed fuzzy observer are formulated in terms of linear matrix inequalities using the Lyapunov method.     

Design of active suspension and electronic stability program for rollover prevention

This paper presents a method for the design of a controller for rollover prevention using active suspension and an electronic stability program (ESP). Active suspension is designed with linear quadratic static output feedback control methodology to attenuate the effect of lateral acceleration on the roll angle and suspension stroke via control of the suspension stroke and tire deflection of the vehicle. However, this approach has a drawback in the loss of maneuverability because the active suspension for rollover prevention produces in vehicles an extreme over-steer characteristic. To overcome this drawback of the active suspension based method, ESP is designed. Through simulations, the proposed method is shown to be effective in preventing rollover.