Modelling polymer draft gears

This paper developed a new and simple approach to model polymer draft gears. Two types of polymer draft gears were modelled and compared with experimental data. Impact characteristics, in-train characteristics and frequency responses of these polymer draft gears were studied and compared with those of a friction draft gear. The impact simulations show that polymer draft gears can withstand higher impact speeds than the friction draft gear. Longitudinal train dynamics simulations show that polymer draft gears have significantly longer deflections than friction draft gears in normal train operations. The maximum draft gear working velocities are lower than 0.2?m/s, which are significantly lower than the impact velocities during shunting operations. Draft gears’ in-train characteristics are similar to their static characteristics but are very different from their impact characteristics; this conclusion has also been reached from frequency response simulations. An analysis of gangway bridge plate failures was also conducted and it was found that they were caused by coupler angling behaviour and long draft gear deflections.     

A review of dynamics modelling of friction draft gear

Longer and heavier trains mean larger in-train forces and more complicated force patterns. Practical experience indicates that the development of fatigue failure of coupling systems in long heavy trains may differ from conventional understanding. The friction-type draft gears are the most widely used draft gears. The ever developing heavy haul transport environment requires further or new understanding of friction draft gear behaviour and its implications for train dynamics as well as fatigue damage of rolling stock. However, modelling of friction draft gears is a highly nonlinear question. Especially the poor predictability, repeatability and the discontinuity of friction make this task more challenging. This article reviews current techniques in dynamics modelling of friction draft gears to provide a starting point that can be used to improve existing or develop new models to achieve more accurate force amplitude and pattern predictions.     

Freight cars shunting impacts analysis using an improved dynamic model of friction draft gear

In this study, simulations of shunting impacts for groups of freight cars that include up to six cars are considered. The simulation technique employs a white-box improved dynamic model of friction draft gear considering all its components and detailed finite element models of the freight cars. The key differences between the one-to-one shunting impact and the impact of long groups of cars in terms of features of the draft gear deflections and the coupler force time history are discussed. We present an example of dynamic finite element analysis for the car body using the coupler force time history obtained from the shunting impact simulation.     

Modelling,simulation and applications of longitudinal train dynamics

ABSTRACT

Significant developments in longitudinal train simulation and an overview of the approaches to train models and modelling vehicle force inputs are firstly presented. The most important modelling task, that of the wagon connection, consisting of energy absorption devices such as draft gears and buffers, draw gear stiffness, coupler slack and structural stiffness is then presented. Detailed attention is given to the modelling approaches for friction wedge damped and polymer draft gears. A significant issue in longitudinal train dynamics is the modelling and calculation of the input forces – the co-dimensional problem. The need to push traction performances higher has led to research and improvement in the accuracy of traction modelling which is discussed. A co-simulation method that combines longitudinal train simulation, locomotive traction control and locomotive vehicle dynamics is presented. The modelling of other forces, braking propulsion resistance, curve drag and grade forces are also discussed. As extensions to conventional longitudinal train dynamics, lateral forces and coupler impacts are examined in regards to interaction with wagon lateral and vertical dynamics. Various applications of longitudinal train dynamics are then presented. As an alternative to the tradition single wagon mass approach to longitudinal train dynamics, an example incorporating fully detailed wagon dynamics is presented for a crash analysis problem. Further applications of starting traction, air braking, distributed power, energy analysis and tippler operation are also presented.     

Establishment and verification of three-dimensional dynamic model for heavy-haul train–track coupled system

For the long heavy-haul train, the basic principles of the inter-vehicle interaction and train–track dynamic interaction are analysed firstly. Based on the theories of train longitudinal dynamics and vehicle–track coupled dynamics, a three-dimensional (3-D) dynamic model of the heavy-haul train–track coupled system is established through a modularised method. Specifically, this model includes the subsystems such as the train control, the vehicle, the wheel–rail relation and the line geometries. And for the calculation of the wheel–rail interaction force under the driving or braking conditions, the large creep phenomenon that may occur within the wheel–rail contact patch is considered. For the coupler and draft gear system, the coupler forces in three directions and the coupler lateral tilt angles in curves are calculated. Then, according to the characteristics of the long heavy-haul train, an efficient solving method is developed to improve the computational efficiency for such a large system. Some basic principles which should be followed in order to meet the requirement of calculation accuracy are determined. Finally, the 3-D train–track coupled model is verified by comparing the calculated results with the running test results. It is indicated that the proposed dynamic model could simulate the dynamic performance of the heavy-haul train well.     

Coupler rotation behaviour and its effect on heavy haul trains

When a locomotive coupler rotates at an angle, the lateral component of the coupler force has an adverse effect on the locomotive's safety, particularly in heavy haul trains. In this paper, a model of a head-mid configuration, a 20,000-t heavy haul train is developed to analyse the rotation behaviour of the locomotive's coupler system and its effect on the dynamic behaviour of such a train's middle locomotive when operating on tangent and curved tracks. The train model includes detailed coupler and draft gear with which to consider the hysteretic characteristics of the rubber draft gear model, the friction characteristics of the coupler knuckles, and the alignment-control characteristics of the coupler shoulder. The results indicate that the coupler's rotation behaviour differs between the tangent and curved tracks, significantly affecting the locomotive's running performance under the braking condition. A larger coupler rotation angle generates a larger lateral component, which increases the wheelset's lateral force and the derailment coefficient. Decreasing the maximum coupler free angle can improve the locomotive's operational performance and safety. Based on these results, the recommended maximum coupler free angle is 4°.     

Estimation of the adhesion force for a disc brake in a skid control condition

The performance of brakes has become important due to increased train speeds. The brake system of a train must possess a large brake force to stop the train safely within a limited stopping distance. However, an excessive brake force deteriorates the ride comfort and causes the train to skid. Therefore, it is necessary to control the brake force within the adhesion force limit. This paper presents an analytical method to estimate the relationship between the brake and adhesion forces of a disc brake system. This method has been applied to the actual disc braking control system of the Korea High-Speed Train (HSR350x), and the adhesion force is estimated in an actual skid condition.     

An improved dynamic model of friction draft gear with a transitional characteristic accounting for housing deformation

A white-box friction draft gear model has been developed. All components of the draft gear are considered. The distinctive feature of the model, as compared to its predecessor, is the transitional characteristic, which accounts for the effect of elastic deformations of the draft gear housing on the position of the friction wedge system components under loading. The adjustment of the model parameters for improved agreement with experimental data is discussed. The new model can be used in the simulation of shunting impacts for single cars and car groups represented by detailed finite-element models. An example of the simulation is presented and compared with experimental data obtained using a shunting hump test stand.     

Dynamic performance of high-speed train passing windbreak breach under unsteady crosswind

Field test and computational fluid dynamics (CFD) method are conducted to investigate the safety of high-speed train under unsteady crosswind. Wheel–rail forces of high-speed train passing a breach between two windbreaks under strong crosswind are measured in a field test. The derailment coefficient of first wheelset of front car at the windward side reaches the allowable value. Meanwhile, the left and right of lateral wheel–rail force are in the opposite direction. This kind of phenomenon has not been tested before. Therefore, CFD and multi-body simulations are performed in order to study the phenomena. Good agreement is obtained between the simulation results and the experimental data. It is concluded that the sudden increase of transient aerodynamic loads, when the train passing the breach, is the root of this phenomenon; after running along the same direction as carbody and bogie run along the opposite direction during the high-speed train passing the windbreak breach; larger opposite longitudinal creeping forces of first wheelset compel the first wheelset to yaw toward the windward side; meanwhile, larger lateral wheel–rail forces compel the first wheelset to run toward the windward side rail; the left and right lateral wheel–rail forces become opposite because the right wheel impacts the windward side rail.     

A review of dynamics modelling of friction wedge suspensions

Three-piece bogies with friction wedge suspensions are the most widely used bogies in heavy haul trains. Fiction wedge suspensions play a key role in these wagon systems. This article reviews current techniques in dynamic modelling of friction wedge suspension with various motivations: to improve dynamic models of friction wedge suspensions so as to improve general wagon dynamics simulations; to seek better friction wedge suspension models for wagon stability assessments in complex train systems; to improve the modelling of other friction devices, such as friction draft gear. Relevant theories and friction wedge suspension models developed by using commercial simulation packages and in-house simulation packages are reviewed.     

A method for testing railway wheel sets on a full-scale roller rig

Full-scale roller rigs for tests on a single axle enable the investigation of several dynamics and durability problems related with the design and operation of the railway rolling stock. In order to exploit the best potential of this test equipment, appropriate test procedures need to be defined, particularly in terms of actuators’ references, to make sure that meaningful wheel –rail contact conditions can be reproduced. The aim of this paper is to propose a new methodology to define the forces to be generated by the actuators in the rig in order to best reproduce the behaviour of a wheel set and especially the wheel –rail contact forces in a running condition of interest as obtained either from multi-body system (MBS) simulation or from on-track measurements. The method is supported by the use of a mathematical model of the roller rig and uses an iterative correction scheme, comparing the time histories of the contact force components from the roller rig test as predicted by the mathematical model to a set of target contact force time histories. Two methods are introduced, the first one considering a standard arrangement of the roller rig, the second one assuming that a differential gear is introduced in the rig, allowing different rolling speeds of the two rollers. Results are presented showing that the deviation of the roller rig test results from the considered targets can be kept within low tolerances (1% approximately) as far as the vertical and lateral contact forces on both wheels are concerned. For the longitudinal forces, larger deviations are obtained except in the case where a differential gear is introduced.     

Simulation of longitudinal dynamics of a freight train operating through a car dumper

A heavy haul train and car dumper model was created to analyse train longitudinal dynamics during dumping. Influence of such factors as performance curve of draft gears, total free slack in couplers, operating mode of train positioner and braking of last two cars of train on the in-train forces was considered.     

Prediction of vibrating forces on meshing gears for a gear rattle using a new multi-body dynamic model

An efficient multibody dynamic model was developed to predict the vibrating transmitted gear forces of loaded and unloaded pairs of helical gears simultaneously at all speeds. The model can also calculate the bearing forces of a manual transmission that, in turn, may be converted to rattling noises. The bending of meshing gear teeth and torsional flexibility of transmission shafts were considered and embodied effectively in the multibody dynamic model by calculating the tooth bending stiffness and adding a torsion spring on a shaft section between two gears, respectively. The reactive forces on teeth and bearings were calculated and compared using three different models that were developed for this study — an equivalent model, a rigid-body model, and a frequency-based model. The equivalent model took only 58% computation time, compared to the frequency-based method, even though the two showed very similar results.     

An integrated draft gear model with the consideration of wagon body structural characteristics

With the increase of railway wagon axle load and the growth of marshalling quantity, the problem caused by impact and vibration of vehicles is increasingly serious, which leads to the damage of vehicle structures and the components. In order to improve the reliability of longitudinal connection model for vehicle impact tests, a new railway wagon longitudinal connection model was developed to simulate and analyse vehicle impact tests. The new model is based on characteristics of longitudinal force transmission for vehicles and parts. In this model, carbodies and bogies were simplified to a particle system that can vibrate in the longitudinal direction, which corresponded to a stiffness-damping vibration system. The model consists of three sub-models, that is, coupler and draft gear sub-model, centre plate sub-model and carbody structure sub-model. Compared with conventional draft gear models, the new model was proposed with geometrical and mechanical relations of friction draft gears considered and with behaviours of sticking, sliding and impact between centre plate and centre bowl added. Besides, virtual springs between discrete carbodies were built to describe the structural deformation of carbody. A computation program for longitudinal dynamics based on vehicle impact tests was accomplished to simulate. Comparisons and analyses regarding the train dynamics outputs and vehicle impact tests were conducted. Simulation results indicate that the new wagon longitudinal connection model can provide a practical application environment for wagons, and the outputs of vehicle impact tests agree with those of field tests. The new model can also be used to study on longitudinal vibrations of different vehicles, of carbody and bogie, and of carbody itself.     

Locomotive dynamic performance under traction/braking conditions considering effect of gear transmissions

Traction or braking operations are usually applied to trains or locomotives for acceleration, speed adjustment, and stopping. During these operations, gear transmission equipment plays a very significant role in the delivery of traction or electrical braking power. Failures of the gear transmissions are likely to cause power loses and even threaten the operation safety of the train. Its dynamic performance is closely related to the normal operation and service safety of the entire train, especially under some emergency braking conditions. In this paper, a locomotive–track coupled vertical–longitudinal dynamics model is employed with considering the dynamic action from the gear transmissions. This dynamics model enables the detailed analysis and more practical simulation on the characteristics of power transmission path, namely motor–gear transmission–wheelset–longitudinal motion of locomotive, especially for traction or braking conditions. Multi-excitation sources, such as time-varying mesh stiffness and nonlinear wheel–rail contact excitations, are considered in this study. This dynamics model is then validated by comparing the simulated results with the experimental test results under braking conditions. The calculated results indicate that involvement of gear transmission could reveal the load reduction of the wheelset due to transmitted forces. Vibrations of the wheelset and the motor are dominated by variation of the gear dynamic mesh forces in the low speed range and by rail geometric irregularity in the higher speed range. Rail vertical geometric irregularity could also cause wheelset longitudinal vibrations, and do modulations to the gear dynamic mesh forces. Besides, the hauling weight has little effect on the locomotive vibrations and the dynamic mesh forces of the gear transmissions for both traction and braking conditions under the same running speed.     

Theoretical and experimental excitation force spectra for railway-induced ground vibration: vehicle–track–soil interaction,irregularities and soil measurements

Excitation force spectra are necessary for a realistic prediction of railway-induced ground vibration. The excitation forces cause the ground vibration and they are themselves a result of irregularities passed by the train. The methods of the related analyses – the wavenumber integration for the wave propagation in homogeneous or layered soils, the combined finite-element boundary-element method for the vehicle–track–soil interaction – have already been presented and are the base for the advanced topic of this contribution. This contribution determines excitation force spectra of railway traffic by two completely different methods. The forward analysis starts with vehicle, track and soil irregularities, which are taken from literature and axle-box measurements, calculates the vehicle–track interaction and gets theoretical force spectra as the result. The second method is a backward analysis from the measured ground vibration of railway traffic. A calculated or measured transfer function of the soil is used to determine the excitation force spectrum of the train. A number of measurements of different soils and different trains with different speeds are analysed in that way. Forward and backward analysis yield the same approximate force spectra with values around 1 kN for each axle and third of octave.     

新型电控机械式自动变速器参数优化及性能研究（双语出版）

为解决传统电控机械式自动变速器（AMT）换挡过程中的动力中断问题,同时提高整车动力性与经济性,提出一种将行星机构安装在AMT输入端构成的新型自动变速器（N-AMT）,并对N-AMT基本结构进行详细介绍,同时就驻车、起步和换挡过程中行星机构工作模式进行详细分析。首先根据最大、最小传动比、挡位数和相邻速比的设计要求对N-AMT进行速比初步设计,然后结合AMT换挡和双离合（DCT）换挡各自特点,以动力性为约束,NEDC工况最佳燃油经济性为目标进行遗传算法速比优化设计。利用速比优化设计方法进行不同挡位N-AMT方案设计,并根据动力学关系建立整车模型,对N-AMT进行动力性与经济性分析。综合考虑不同挡位数方案的分析结果和变速器结构成本等因素,确定8挡N-AMT为最终设计方案。最后对8挡N-AMT进行台架、起步和顺序换挡试验。研究结果表明：8挡N-AMT的NEDC循环工况油耗为6.38 L·（100 km）^-1,较5挡AMT原型车工况油耗6.95 L·（100 km）^-1减少了8.86%;N-AMT可以有效消除部分挡位间动力中断的问题,在30%加速踏板开度下,8挡N-AMT的起步时间为1.55 s,较5挡AMT起步时间1.61 s减少了3.7%,整车动力性得到提高;N-AMT换挡时间保持在1.05 s以内,且换挡平顺性较好。     

The mechanism for the coupler and draft gear and its influence on safety during a train collision

A mechanical model of the coupler and draft gear was established to study the mechanism during an intercity train collision. The model includes four rigid bodies, one spherical joint, two nonlinear torsion spring units and two nonlinear hysteresis units. Simulation and test results show that the axial characteristics of the model are reasonable and the model can reasonably simulate the pitching movement of the coupler. The influence of the coupler and draft gear on the collision behaviour of the train is analysed considering a four-section intercity train. The results show that during the collision process, the amount of compression of the middle coupler is an important factor influencing the pitching deflection angle. The pitching motion posture of the coupler changes with the initial pitching deflection angle, but the initial pitching deflection angle has little effect on its yawing deflection angle. When the pitching angle of the middle coupler is elevated, as the elevation angle increases, the derailment risk of the ‘A’ end bogie of the previous vehicle increases, whereas the risk of derailment of the ‘B’ end bogie of the subsequent vehicle decreases. When the pitching angle of the middle coupler is depressed, the derailment trends for the front and rear bogies exhibit the opposite trend from that of the elevation angle. As the train collision speed increases, the pitching motion of the middle coupler is limited to forcing a yawing motion, causing the yawing deflection angle to increase sharply, which causes the wheel–rail lateral force to increase rapidly. From this, the derailment risk of the bogie increases, which further causes large displacement lateral buckling of the train. An anti-lateral buckling device can limit the yawing deflection angle of the middle coupler, preventing lateral buckling from large displacement and decreasing the risk of derailment.     

车辆对桥墩撞击力仿真分析及简化计算

为研究车辆撞击桥墩过程中的撞击力及其简化计算方法,采用有限元软件建立等效车辆-桥墩碰撞模型,在验证等效车辆模型合理性的基础上,改变撞击速度得到撞击力时程曲线;提出将车辆碰撞桥墩视为匀减速过程的撞击力简化计算方法,并将简化计算方法撞击力结果和其它3种方法结果以及国内外规范取值进行对比.结果表明:撞击过程中车辆撞击力先后出...     

应用电动增压器提高车辆高原行驶的动力性

对一辆满载质量14t的柴油载货汽车,在平原、高原进行了超速挡和直接挡在各自最小稳定车速下的固定挡全油门加速性能试验.由此指出,相同速度下两地加速时间存在差值,超速挡加速能力的差距比直接挡更明显;相邻两车速之间的高原滑行距离明显加长.分析了产生问题的原因,提出在原车增压器的基础上加装一个电动增压器,以有效地提高车辆高原行驶的动力性,并有利于降低车辆行驶带来的排放污染.