Railway Vehicles with Perfect Curving Behaviour Which are Asymptotically Stable at Vanishing Speed

SUMMARY

Paper deals with the linear behaviour of a railway vehicle with any arbitrary number of wheelsets, body parts and connecting elements. A vehicle which has both perfect curving properties and asymptotical stability at vanishing speed, has to satisfy a twofold condition, indicated by Wickens in 1978. In the present paper this condition is derived in reliance upon the dimension theorem for linear mappings. How the investigation can be executed in practice, is shown for the case of a two-axled vehicle. At last the behaviour in a transition curve is discussed.     

The characteristic velocity stability indicator for passenger cars

Driver assistance systems have received increased attention as market demands have pushed for improved automotive safety. These systems are designed to aid the driver by preventing any unstable or unpredictable vehicle behaviour. One global indicator for stability and driving conditions could help to manage the control algorithms and driver warning subroutines. Another problem which could be solved by a precise driving situation indicator is evaluating new vehicles during test drives. After a short introduction to a linear lateral vehicle model, an analytical approach for an online calculation of different driving conditions (i.e., stability, understeering, oversteering, and neutralsteering) is given. A characteristic velocity stability indicator is defined, which allows online computation of the present driving condition. Results are then checked against real measurements of a test vehicle.     

The characteristic velocity stability indicator for passenger cars

Driver assistance systems have received increased attention as market demands have pushed for improved automotive safety. These systems are designed to aid the driver by preventing any unstable or unpredictable vehicle behaviour. One global indicator for stability and driving conditions could help to manage the control algorithms and driver warning subroutines. Another problem which could be solved by a precise driving situation indicator is evaluating new vehicles during test drives. After a short introduction to a linear lateral vehicle model, an analytical approach for an online calculation of different driving conditions (i.e., stability, understeering, oversteering, and neutralsteering) is given. A characteristic velocity stability indicator is defined, which allows online computation of the present driving condition. Results are then checked against real measurements of a test vehicle.     

Vehicle dynamics control using an active third-axle system

This paper introduces the active third-axle system as an innovative vehicle dynamic control method. This method can be applicable for different kinds of three-axle vehicles such as buses, trucks, or even three-axle passenger cars. In this system, an actuator on the middle axle actively applies an independent force on the suspension to improve the handling characteristics, and hence, its technology is similar to slow-active suspension systems. This system can change the inherent vehicle dynamic characteristics, such as under/over steering behaviour, in the linear handling region, as well as vehicle stability in the nonlinear, limit handling region. In this paper, our main focus is to show the potential capabilities of this method in enhancing vehicle dynamic performance. For this purpose, as the first step, the proposed method in both linear and nonlinear vehicle handling regions is studied mathematically. Next, a comprehensive, nonlinear, 10 degrees of freedom vehicle model with a fuzzy control strategy is used to evaluate the effectiveness of this system. The dynamic behaviour of a vehicle, when either uncontrolled or equipped with the active third axle is then compared. Simulation results show that this active system can be considered as an innovative method for vehicle dynamic control.     

Modelling and control of a new differential steering concept

This paper presents a new steer-by-wire concept using an all-wheel drive vehicle layout with in-wheel motors while completely omitting the application of any dedicated steering device. Steering is based on the so-called differential steering principle which generates the necessary steering moment about the kingpins by a traction force difference between left and right sides of the vehicle. In order to investigate the behaviour of the vehicle and to design the underlying control algorithms, a planar vehicle model is presented, where the vehicle is described as constrained non-holonomic system requiring a special treatment. A state feedback linear controller for controlling of the lateral dynamics of the vehicle at higher speeds and a simple PI angle controller for low-speed manoeuvring are developed. The resulting behaviour of the system is investigated by various simulation experiments demonstrating a comparable steering performance of the new steering concept as that of conventional passenger cars.     

Random Response of Tractor-Semitrailer System

This work describes an analytical study of the dynamic behaviour of a tractor-semitrailer vehicle. A digital computer simulation was used to describe the longitudinal, vertical, and pitching motions of the vehicle travelling over a stationary random road surface. A man-seat model was also incorporated into the simulation. Vehicle response to road irregularities has been studied by assuming two different roads for loaded and unloaded cases.

Numerical results are presented for vehicle, showing system eigenvalues, power spectral densities and root mean square values of the linear and angular accelerations and displacements. Vehicle acceleration response is compared with the ISO riding comfort standard. All results for the loaded and unloaded cases and for smooth and rough roads indicated that an uncomfortable ride would result from vehicle response.     

Stationar- und Ubergangsverhalten von Sattel- und Lasttugen bei der Kreisfahrt: Lineare Berechnungen

ABSTRACT

Steady and Transient Turning of Tractor-Semitrailer and Truck-Trailer Combinations: A Linear Analysis

A simplified analysis is made of the yaw stability and control of the two types of the commercial vehicle combinations (tractor-semitrailer, truck-trailer) at a constant forward velocity during steady and transient turning. The combined vehicle is treated as a linear dynamic system (Fig. 2). The steer angle at the front wheels of the tractor (or truck) and the steady-state responses if the road verhicle train (yaw rate, articulation angles and sideslip angle) are calculated (Equations 18 to 25). Exploratory calculations are performed to determine the influence of the cornering stiffness of the tires for the two types of the vehicle combinations upon the steady-state responses (Figs. 7 to 10). For a linear simplified model of articulated vehicle the steady-state turning behaviour is stable also under conditions of rather high driving speed (70 km/h). A simplified analysis of the transient turning behaviour of the two types of road trains has shown the tractor-semitrailer to preserve stability even under driving speeds exceeding 70 km/h (Fig. 13), whereas the truck-trailer combinations appear to become oscillatory unstable if the driving speed rises above the 60 km/h margin (Fig. 14).     

Design of a feedback-feedforward steering controller for accurate path tracking and stability at the limits of handling

This paper presents a feedback-feedforward steering controller that simultaneously maintains vehicle stability at the limits of handling while minimising lateral path tracking deviation. The design begins by considering the performance of a baseline controller with a lookahead feedback scheme and a feedforward algorithm based on a nonlinear vehicle handling diagram. While this initial design exhibits desirable stability properties at the limits of handling, the steady-state path deviation increases significantly at highway speeds. Results from both linear and nonlinear analyses indicate that lateral path tracking deviations are minimised when vehicle sideslip is held tangent to the desired path at all times. Analytical results show that directly incorporating this sideslip tangency condition into the steering feedback dramatically improves lateral path tracking, but at the expense of poor closed-loop stability margins. However, incorporating the desired sideslip behaviour into the feedforward loop creates a robust steering controller capable of accurate path tracking and oversteer correction at the physical limits of tyre friction. Experimental data collected from an Audi TTS test vehicle driving at the handling limits on a full length race circuit demonstrates the improved performance of the final controller design.     

Stationar- und Ubergangsverhalten von Sattel- und Lasttugen bei der Kreisfahrt: Lineare Berechnungen

Steady and Transient Turning of Tractor-Semitrailer and Truck-Trailer Combinations: A Linear Analysis

A simplified analysis is made of the yaw stability and control of the two types of the commercial vehicle combinations (tractor-semitrailer, truck-trailer) at a constant forward velocity during steady and transient turning. The combined vehicle is treated as a linear dynamic system (Fig. 2). The steer angle at the front wheels of the tractor (or truck) and the steady-state responses if the road verhicle train (yaw rate, articulation angles and sideslip angle) are calculated (Equations 18 to 25). Exploratory calculations are performed to determine the influence of the cornering stiffness of the tires for the two types of the vehicle combinations upon the steady-state responses (Figs. 7 to 10). For a linear simplified model of articulated vehicle the steady-state turning behaviour is stable also under conditions of rather high driving speed (70 km/h). A simplified analysis of the transient turning behaviour of the two types of road trains has shown the tractor-semitrailer to preserve stability even under driving speeds exceeding 70 km/h (Fig. 13), whereas the truck-trailer combinations appear to become oscillatory unstable if the driving speed rises above the 60 km/h margin (Fig. 14).     

Random Response of Tractor-Semitrailer System

SUMMARY

This work describes an analytical study of the dynamic behaviour of a tractor-semitrailer vehicle. A digital computer simulation was used to describe the longitudinal, vertical, and pitching motions of the vehicle travelling over a stationary random road surface. A man-seat model was also incorporated into the simulation. Vehicle response to road irregularities has been studied by assuming two different roads for loaded and unloaded cases.

Numerical results are presented for vehicle, showing system eigenvalues, power spectral densities and root mean square values of the linear and angular accelerations and displacements. Vehicle acceleration response is compared with the ISO riding comfort standard. All results for the loaded and unloaded cases and for smooth and rough roads indicated that an uncomfortable ride would result from vehicle response.     

Comparison of All-Wheel Steerings in the System Driver-Vehicle

Different load or tires and a drive on an ice-coated road can overcharge a driver to such an extend, that the result may be an accident. Therefore the aim of development is a self-acting compensation of the vehicle to different vehicle transfer behaviour (invariant vehicle behaviour).

The calculation of so called optimal characteristics shows, that only rear-wheel steering cannot realize this aim of development. Therefore an additional front-wheel angle, which is not influenced by the driver, is necessary. A transfer function can be calculated in order to get controlled steering of the rear wheels without the influence of load.

It is not possible to realize optimal characteristics, because the parameters of the vehicle are difficult to measure. Only an optimal diagnosis and control of driving condition realize a relief for the driver in every driving situation in order to avoid most of the accidents.

The often demanded sideslip angle compensation only worsens driving conditions on ice-coated roads. Therefore systems which identify the driving condition themselves have to be favoured in any case.     

Investigation on dynamical interaction between a heavy vehicle and road pavement

This paper presents a model for three-dimensional, heavy vehicle-pavement-foundation coupled system, which is modelled as a seven-DOF vehicle moving along a simply supported double-layer rectangular thin plate on a linear viscoelastic foundation. The vertical tyre force is described by a single point-contact model, while the pavement-foundation is modelled as a double-layer plate on a linear viscoelastic foundation. Using the Galerkin method and quick direct integral method, the dynamical behaviour of the vehicle-pavement-foundation coupled system is investigated numerically and compared with that of traditional vehicle system and pavement system. The effects of coupling action on vehicle body vertical acceleration, suspension deformations, tyre forces and pavement displacements are also obtained. The investigation shows that the coupling action could not be neglected even on a smooth road surface, such as highway. Thus, it is necessary to investigate the dynamics of vehicle and pavement simultaneously based on the vehicle-pavement-foundation coupled system.     

Comparison of All-Wheel Steerings in the System Driver-Vehicle

SUMMARY

Different load or tires and a drive on an ice-coated road can overcharge a driver to such an extend, that the result may be an accident. Therefore the aim of development is a self-acting compensation of the vehicle to different vehicle transfer behaviour (invariant vehicle behaviour).

The calculation of so called optimal characteristics shows, that only rear-wheel steering cannot realize this aim of development. Therefore an additional front-wheel angle, which is not influenced by the driver, is necessary. A transfer function can be calculated in order to get controlled steering of the rear wheels without the influence of load.

It is not possible to realize optimal characteristics, because the parameters of the vehicle are difficult to measure. Only an optimal diagnosis and control of driving condition realize a relief for the driver in every driving situation in order to avoid most of the accidents.

The often demanded sideslip angle compensation only worsens driving conditions on ice-coated roads. Therefore systems which identify the driving condition themselves have to be favoured in any case.     

Run-off-road and recovery – state estimation and vehicle control strategies

Despite many advances in vehicle safety technology, traffic fatalities remain a devastating burden on society. With over two-thirds of all fatal single-vehicle crashes occurring off the roadway, run-off-road (ROR) crashes have become the focus of much roadway safety research. Current countermeasures, including roadway infrastructure modifications and some on-board vehicle safety systems, remain limited in their approach as they do not directly address the critical factor of driver behaviour. It has been shown that ROR crashes are often the result of poor driver performance leading up to the crash. In this study, the performance of two control algorithms, sliding control and linear quadratic control, was investigated for use in an autonomous ROR vehicle recovery system. The two controllers were simulated amongst a variety of ROR conditions where typical driver performance was inadequate to safely operate the vehicle. The sliding controller recovered the fastest within the nominal conditions but exhibited large variability in performance amongst the more extreme ROR scenarios. Despite some small sacrifices in lateral error and yaw rate, the linear quadratic controller demonstrated a higher level of consistency and stability amongst the various conditions examined. Overall, the linear quadratic controller recovered the vehicle 25% faster than the sliding controller while using 70% less steering, which combined with its robust performance, indicates its high potential as an autonomous ROR countermeasure.     

Design of an Active Unilateral Brake Control System for Five-Axle Tractor-Semitrailer Based on Sensitivity Analysis

This paper presents the results of a parametric sensitivity analysis of a five-axle tractor-semitrailer vehicle combination using 3-DOF linear yaw/plane model. The first order logarithmic sensitivity functions are derived with respect to several vehicle design parameters. For stabilization of the vehicle's directional behaviour a fairly new control concept called “Active Unilateral Braking Control (AUBC)” acting on the tractor rear wheel's in order to produce a stabilizing yaw torque is investigated. The AUBC system improves not only the directional stability, but also affects the roll dynamics of the vehicle. The sensitivity of the controlled vehicle system with linear quadratic controller (LQR) is also examined, a robust controller design procedure is proposed as a result of the sensitivity analysis. The robustness of this controller in the presence of both internal (including parametric uncertainties, non-linear dynamics) and external disturbances (such as road irregularities and side wind) allows its implementation with confidence with a non-linear vehicle model. The applicability of this control system to a non-linear vehicle model is tested using a 34 DOF, non-linear vehicle model of the tractor-semitrailer combination.     

Design of an Active Unilateral Brake Control System for Five-Axle Tractor-Semitrailer Based on Sensitivity Analysis

SUMMARY

This paper presents the results of a parametric sensitivity analysis of a five-axle tractor-semitrailer vehicle combination using 3-DOF linear yaw/plane model. The first order logarithmic sensitivity functions are derived with respect to several vehicle design parameters. For stabilization of the vehicle's directional behaviour a fairly new control concept called “Active Unilateral Braking Control (AUBC)” acting on the tractor rear wheel's in order to produce a stabilizing yaw torque is investigated. The AUBC system improves not only the directional stability, but also affects the roll dynamics of the vehicle. The sensitivity of the controlled vehicle system with linear quadratic controller (LQR) is also examined, a robust controller design procedure is proposed as a result of the sensitivity analysis. The robustness of this controller in the presence of both internal (including parametric uncertainties, non-linear dynamics) and external disturbances (such as road irregularities and side wind) allows its implementation with confidence with a non-linear vehicle model. The applicability of this control system to a non-linear vehicle model is tested using a 34 DOF, non-linear vehicle model of the tractor-semitrailer combination.     

利用力矩电机全工况仿真汽车转向盘反力矩

在汽车动态模拟系统中，转向盘反力矩的仿真逼真度影响实验驾驶员的操纵行为，从而影响驾驶模拟实验的准确性。本文系统地阐述了利用力矩电机进行全工况仿真汽车转向盘反力矩的原理、力矩电机的工况分析及稳态误差分析等，为全工况仿真汽车转向盘反力矩提供了一种新方法。     

An approach for the validation of railway vehicle models based on on-track measurements

This paper proposes an approach for the validation of railway vehicle models based on on-track measurements. The validation of simulation models has gained importance with the introduction of new applications of multi-body simulation in railway vehicle dynamics as the assessment of track geometry defects, the investigation of derailments and the analysis of gauging. These applications are not only interested in qualitative predictions of the vehicle behaviour but also in precise quantitative results of the safety and comfort relevant vehicle responses. The validation process aims at guaranteeing that the simulation model represents the dynamic behaviour of the real vehicle with a sufficient good precision. A misfit function is defined which quantifies the distance between the simulated and the measured vehicle response allowing to evaluate different models at different running conditions. The obtained modelling errors are compared to the measurement uncertainty estimated for one vehicle using repeatability analysis.     

Optimal Preview Control of a Two-dof Vehicle Model Using Stochastic Optimal Control Theory

An optimal preview control algorithm is applied to a two degree of freedom(dof) vehicle model travelling with constant velocity on a randomly profiled road. The road roughness is modelled as a homogeneous random process being the output of a linear first order filter to white noise. The input from the road irregularity is assumed to be measured at some distance in front of the vehicle and this measured infonnation is utilized by the active controller to prepare the system for the ensuing input. The preview control algorithm is obtained by minimizing a quadratic performance index and by describing the average behaviour of the system by the covariance matrix of the vehicle response state vector. Results are presented for full state feedback and significant improvements in sprung mass acceleration, suspension working space and road holding are observed.