The development of a driving cycle for fuel consumption and emissions evaluation

A technique is developed for synthesising a statistically representative driving cycle for an urban area based on dynamic driving data collected by the chase car technique. The simulation procedure based on a “Knight's Tour” concept relies on an understanding of the dynamics of urban driving, in particular the observed tendency to maintain constant acceleration and deceleration rates. The final synthesised cycle is a representative real driving trace although the analysis raises questions about the level of resolution currently required for driving cycle work.     

Fuel cycle emissions and life cycle costs of alternative fuel vehicle policy options for the City of Houston municipal fleet

Municipal fleet vehicle purchase decisions provide a direct opportunity for cities to reduce emissions of greenhouse gases (GHG) and air pollutants. However, cities typically lack comprehensive data on total life cycle impacts of various conventional and alternative fueled vehicles (AFV) considered for fleet purchase. The City of Houston, Texas, has been a leader in incorporating hybrid electric (HEV), plug-in hybrid electric (PHEV), and battery electric (BEV) vehicles into its fleet, but has yet to adopt any natural gas-powered light-duty vehicles. The City is considering additional AFV purchases but lacks systematic analysis of emissions and costs. Using City of Houston data, we calculate total fuel cycle GHG and air pollutant emissions of additional conventional gasoline vehicles, HEVs, PHEVs, BEVs, and compressed natural gas (CNG) vehicles to the City's fleet. Analyses are conducted with the Greenhouse Gases, Regulated Emissions, and Energy use in Transportation (GREET) model. Levelized cost per kilometer is calculated for each vehicle option, incorporating initial purchase price minus residual value, plus fuel and maintenance costs. Results show that HEVs can achieve 36% lower GHG emissions with a levelized cost nearly equal to a conventional sedan. BEVs and PHEVs provide further emissions reductions, but at levelized costs 32% and 50% higher than HEVs, respectively. CNG sedans and trucks provide 11% emissions reductions, but at 25% and 63% higher levelized costs, respectively. While the results presented here are specific to conditions and vehicle options currently faced by one city, the methods deployed here are broadly applicable to informing fleet purchase decisions.     

Comparative evaluation of eight legislated driving schedules in terms of cycle metrics and emissions from a diesel-powered turbocharged van

The present work compares, on a fundamental basis, the performance and emissions of a diesel-engined large van running on eight legislated driving cycles, namely the European NEDC, the U.S. FTP-75, HFET, US06, LA-92 and NYCC, the Japanese JC08 and the Worldwide WLTC 3-2. It aims to identify differences and similarities between various influential driving cycles valid in the world, and correlate important cycle metrics with vehicle exhaust emissions. The results derive from a computational code based on an engine mapping approach, with experimentally derived correction coefficients applied to account for transient discrepancies; the code is coupled to a comprehensive vehicle model. Soot as well as nitrogen monoxide are the examined pollutants. Only the driving cycle schedule is under investigation in this work, and not the whole test procedure, in order to identify vehicle speed (transient) effects of the individual cycles only. The recently developed WLTC 3-2 is the cycle with a very broad and at the same time dense coverage of the vehicle’s/engine’s operating activity, being thus particularly representative of ‘average’ real-world driving. Even broader is the distribution of the US06, whereas particularly thin and narrow that of the modal NEDC. It is also revealed that the more transient cycles, e.g. the NYCC or the US06, are also the ones with the highest amount of engine-out pollutant emissions and energy consumption. Relative positive acceleration and stops per km are found to correlate very well with energy and fuel consumption and all emitted pollutants.     

Green vehicle technology to enhance the performance of a European port: A simulation model with a cost-benefit approach

In this paper, we study the impact of using a new intelligent vehicle technology on the performance and total cost of a European port, in comparison with existing vehicle systems like trucks. Intelligent autonomous vehicles (IAVs) are a new type of automated guided vehicles (AGVs) with better maneuverability and a special ability to pick up/drop off containers by themselves. To identify the most economical fleet size for each type of vehicle to satisfy the port’s performance target, and also to compare their impact on the performance/cost of container terminals, we developed a discrete-event simulation model to simulate all port activities in micro-level (low-level) details. We also developed a cost model to investigate the present values of using two types of vehicle, given the identified fleet size. Results of using the different types of vehicles are then compared based on the given performance measures such as the quay crane net moves per hour and average total discharging/loading time at berth. Besides successfully identifying the optimal fleet size for each type of vehicle, simulation results reveal two findings: first, even when not utilising their ability to pick up/drop off containers, the IAVs still have similar efficacy to regular trucks thanks to their better maneuverability. Second, enabling IAVs’ ability to pick up/drop off containers significantly improves the port performance. Given the best configuration and fleet size as identified by the simulation, we use the developed cost model to estimate the total cost needed for each type of vehicle to meet the performance target. Finally, we study the performance of the case study port with advanced real-time vehicle dispatching/scheduling and container placement strategies. This study reveals that the case study port can greatly benefit from upgrading its current vehicle dispatching/scheduling strategy to a more advanced one.     

Hitting the sweet spot: Variability in commute lengths and vehicle emissions across a diverse state

In this paper we consider travel across Virginia and identify sustainability “sweet spots” where commute lengths and vehicle emissions per mile combine to maximize green travel in terms of total CO₂ emissions associated with commuting. The analysis is conducted across local voter precincts (N = 2373 in the state) because they are a useful proxy for neighborhoods and well-sized for implementing policy designed to encourage sustainable travel behavior. Virginia is especially appropriate for an examination of variability in sustainable travel behavior and technologies because the state’s transportation, demographic, and political patterns are particularly diverse and have been changing rapidly. We identify four Virginia precinct-based sustainability clusters: Sweet Spots, Emerging Sweet Spots, Neutral and Non-sustaining. A model of demographic differences among the clusters shows that sustainability outcomes, understood in terms of both local commute behavior and vehicle emissions, are significantly associated with the diverse demography and politics of the state. We also look at changes in transportation sustainability and socio-demographic trends within the clusters over the past half-decade, showing that differences in sustainability and demographic metrics are actually accelerating within the state over time. We conclude with a discussion of the implications of the differences among the clusters for developing and implementing effective transportation sustainability policies across the state.     

A comparative study of the emissions by road maintenance works and the disrupted traffic using life cycle assessment and micro-simulation

Life cycle assessment is being accepted by the road industry to measure such key environmental impacts as the energy consumption and carbon footprint of its materials and laying processes. Previous life cycle studies have indicated that the traffic vehicles account for the majority of fuel consumption and emissions from a road. Contractors and road agencies are looking for road maintenance works that have the least overall environmental impact considering both the roadwork itself and the disrupted traffic. We review life cycle assessment studies and describe the development of a model for pavement construction and maintenance, detailing the methodology and data sources. The model is applied to an asphalt pavement rehabilitation project in the UK, and the micro-simulation program VISSIM is used to model the traffic on that road section. The simulation results are fed into a traffic emissions model and emissions from the roadwork and the traffic are compared. The additional fuel consumption and emissions by the traffic during the roadwork are significant. This indicates that traffic management at road maintenance projects should be included in the life cycle assessment analysis of such work.     

Improvement in the estimation and back-extrapolation of CO2 emissions from the Irish road transport sector using a bottom-up data modelling approach

Road transport is a major source of CO₂ emissions in Ireland and accounts for almost 96% of the total CO₂ emissions from the transport sector. Following the recent adopted UNFCCC reporting guidelines on annual inventories [24/CP.19], this study applied the 2006 IPCC Guidelines for National Greenhouse Gas Inventories (2006 IPCC GLs) tier 3 approach to estimate CO₂ emissions from road transport at the vehicle category level, for the first time in Ireland. For this, disaggregated datasets were prepared based on year of vehicle registration and mileage since registration of the vehicle. Such an approach provided a more realistic national scenario in comparison to the use of average mileage degradation in emission calculations. This investigation comprised a recalculation of previous emissions estimates (1990–2012) and an estimation of CO₂ emissions in 2013 using a previously unavailable level of data disaggregation for vehicle mileage as well as using vehicle class specific data and an improved bottom-up estimation methodology in COPERT. Historic vehicle fleet data were restructured, annual mileage data were estimated in relation to the fleet data and back extrapolated using a regression approach.The results showed that the mileage degradation was not only subject to fuel technology, engine size, and age but also the emissions class and vehicle category. It was also observed that the disaggregated level of data provided a different CO₂ emissions split among the vehicle categories than that of previous estimations which were based on an aggregated level of data. Previous emissions inventories (1990–2012) were shown to have underestimated the share from diesel fuelled passenger cars by more than 56% in 2012. Diesel fuelled passenger cars were also found to account for the majority of CO₂ emissions from road transport activities in Ireland in 2013. The level and trend assessment showed that emissions from Euro-II and Euro-III classed vehicles especially for passenger cars, which have a significant contribution to the total emission in 2013 have caused an increase in fleet level emissions in Ireland. In addition, the results also showed that the emissions share from Light Duty Vehicles and Heavy Duty Vehicles were overestimated by previous investigations. This paper highlights the importance of the resolution of data used in emissions inventory preparation which may impact upon future projections and policy formulation. The findings of this investigation are also discussed in relation their implications for road transport policy, including carbon taxation and future policy options aimed at achieving EU emissions target in 2020.     

Inference on mode preferences,vehicle purchases,and the energy paradox using a Bayesian structural choice model

Discrete choice modeling is experiencing a reemergence of research interest in the inclusion of latent variables as explanatory variables of consumer behavior. There are several reasons that motivate the integration of latent attributes, including better-informed modeling of random consumer heterogeneity and treatment of endogeneity. However, current work still is at an early stage and multiple simplifying assumptions are usually imposed. For instance, most previous applications assume all of the following: independence of taste shocks and of latent attributes, exclusion restrictions, linearity of the effect of the latent attributes on the utility function, continuous manifest variables, and an a priori bound for the number of latent constructs. We derive and apply a structural choice model with a multinomial probit kernel and discrete effect indicators to analyze continuous latent segments of travel behavior, including inference on the energy paradox. Our estimator allows for interaction and simultaneity among the latent attributes, residual correlation, nonlinear effects on the utility function, flexible substitution patterns, and temporal correlation within responses of the same individual. Statistical properties of the Bayes estimator that we propose are exact and are not affected by the number of latent attributes.     

Examining the relationship between active travel,weather, and the built environment: a multilevel approach using a GPS-enhanced dataset

This study examines how the built environment and weather conditions influence the use of walking as a mode of transport. The Halifax Regional Municipality in Nova Scotia, Canada is the study area for this work. Data are derived from three sources: a socio-demographic questionnaire and a GPS-enhanced prompted recall time-use diary collected between April 2007 and May 2008 as part of the Halifax Space-Time Activity Research project, a daily meteorological summary from Environment Canada, and a comprehensive GIS dataset from the regional municipality. Two binary logit multilevel models are estimated to examine how the propensity to use walking is influenced by the built environment and weather while controlling for socio-demographic characteristics. The built environment is measured via five attributes in one model and a walkability index (derived from the five attributes) in the other. Weather conditions are shown to affect walking use in both models. Although the walkability index is significant, the results demonstrate that this significance is driven by specific attributes of the built environment—in the case of this study, population density and to a lesser extent, pedestrian infrastructure.