共查询到20条相似文献,搜索用时 750 毫秒
1.
全方位推进器水性能理论预报 总被引:1,自引:1,他引:0
本文应用升力线理论建立了全方位一推进器水性能计算的数学模型,对其在非定常情况下水动力性能计算进行了理论推导,分析了推进器各参数对水性能的影响。数值计算结果表明,本文的全方位推进器水动力性能理论预报趱实验值吻合良好 相似文献
2.
3.
基于粘性流体理论,采用CFD技术数值预报双桨式吊舱推进器的敞水水动力性能。通过对某单桨吊舱推进器进行数值模拟,并与实验值进行比较,验证数值计算方法的准确性。最后数值计算了双桨式吊舱推进器在不同偏转角时的水动力性能,通过数值计算、结果比较和特性分析,计算结果呈现出一定的规律性,达到了给出双桨式全回转吊舱推进器数值预报的方法和一般性规律的目的,可以对此类推进器水动力性能的预报提供参考。 相似文献
4.
5.
6.
7.
应用升力面理论涡格法和面元法,建立了拖式吊舱推进器非定常水动力性能的数值计算方法。螺旋桨桨叶采用升力面理论涡格法计算,吊舱舱体及支架采用HESS-SMITH面元法计算,螺旋桨与吊舱及支架之间的相互影响通过迭代计算来处理。针对拖式吊舱推进器,通过系统的计算和分析,研究了螺旋桨负荷、吊舱和支架诱导速度各分量以及标称与实效诱导速度对其水动力性能的影响。研究表明,就吊舱及支架的实效诱导速度而言,轴向及周向诱导速度主要由支架引起,径向诱导速度主要由吊舱舱体引起。当考察吊舱推进器的定常水动力性能时,可略去吊舱诱导速度的径向及周向分量;考察非定常性能时,可略去径向分量,但应考虑周向分量的影响。以吊舱及支架的标称诱导速度作为进流,将导致非定常推力、扭矩的平均值降低,脉动量幅值减小,因此,虽然标称诱导速度容易得到,但据此进行吊舱推进器的性能预报或设计都会引起一定的误差。非定常水动力的脉动幅值取决于船尾伴流与吊舱诱导速度的相对比例,略去吊舱诱导速度会导致桨叶非定常力的变化特征发生较大变化。 相似文献
8.
9.
《中国舰船研究》2020,(4)
[目的]为了综合分析轮缘推进器的整体水动力性能和强度性能,提出采用基于流固耦合的计算方法进行联立求解。[方法]首先,采用计算流体动力学(CFD)方法计算3种不同导流罩结构的轮缘推进器在不同进速下的推力、扭矩和效率等参数,分析3种结构的轮缘推进器的水动力性能计算结果,以确定最佳的导流罩结构型式;然后,通过联立求解,将CFD计算结果作为轮缘推进器强度校核的载荷条件,计算其在实际工况下的等效应力。[结果]计算结果表明:导流罩对轮缘推进器水动力性能的影响非常大,即使采用相同的螺旋桨模型,不同的导流罩结构也将直接影响整个推进器的推力和效率;对于配置最佳导流罩结构型式的轮缘推进器,螺旋桨在设计航速下的最大等效应力为许用值的68.16%,可以满足设计工况条件下的强度要求。[结论]流固耦合计算方法适用于轮缘推进器的水动力性能和强度校核的有效分析。 相似文献
10.
11.
12.
侯立勋;王超;常欣;黄胜 《船舶与海洋工程学报》2013,12(4):406-412
In order to study the effects of geometric parameters of the rudder on the hydrodynamic performance of the propeller-rudder system,the surface panel method is used to build the numerical model of the steady interaction between the propeller and rudder to analyze the relevant factors.The interaction between the propeller and rudder is considered through the induced velocities,which are circumferentially averaged,so the unsteady problem is translated to steady state.An iterative calculation method is used until the hydrodynamic performance converges.Firstly,the hydrodynamic performance of the chosen propeller-rudder system is calculated,and the comparison between the calculated results and the experimental data indicates that the calculation program is reliable.Then,the variable parameters of rudder are investigated,and the calculation results show that the propeller-rudder spacing has a negative relationship with the efficiency of the propeller-rudder system,and the rudder span has an optimal match range with the propeller diameter.Futhermore,the rudder chord and thickness both have a positive correlation with the hydrodynamic performance of the propeller-rudder system. 相似文献
13.
14.
15.
16.
17.
《船舶与海洋工程学报》2017,(3)
The speed of a ship sailing in waves always slows down due to the decrease in efficiency of the propeller. So it is necessary and essential to analyze the unsteady hydrodynamic performance of propeller in waves. This paper is based on the numerical simulation and experimental research of hydrodynamics performance when the propeller is under wave conditions. Open-water propeller performance in calm water is calculated by commercial codes and the results are compared to experimental values to evaluate the accuracy of the numerical simulation method. The first-order Volume of Fluid(VOF) wave method in STAR CCM+ is utilized to simulate the three-dimensional numerical wave. According to the above prerequisite, the numerical calculation of hydrodynamic performance of the propeller under wave conditions is conducted, and the results reveal that both thrust and torque of the propeller under wave conditions reveal intense unsteady behavior. With the periodic variation of waves, ventilation, and even an effluent phenomenon appears on the propeller. Calculation results indicate, when ventilation or effluent appears, the numerical calculation model can capture the dynamic characteristics of the propeller accurately, thus providing a significant theory foundation forfurther studying the hydrodynamic performance of a propeller in waves. 相似文献
18.
19.
根据螺旋桨的投影原理以及其几何参数,用三维建模软件 CATIA 建立三维螺旋桨数值模型。根据计算流体动力学(CFD)原理,使用流体动力学软件 Fluent 对螺旋桨数值模型进行分析计算。采用 RANS 方法结合RSM 湍流模型求解螺旋桨三维粘性流场,计算域的离散采用非结构网格方法,运用相对旋转坐标方法(MRF)来模拟螺旋桨的运动,以此求出该螺旋桨在常态以及堵塞效应下的流场特性,并将螺旋桨的数值计算结果与试验结果进行对比以确定该方法的适用性。最后研究堵塞效应的相关性质并将螺旋桨普通敞水性能与螺旋桨在堵塞效应下的敞水性能进行对比,得出堵塞效应对螺旋桨敞水性能的影响。 相似文献
20.
基于CFD技术,分别预报了单个螺旋桨、桨舵组合的水动力性能,并将计算结果与试验值比较,结果显示预报结果与试验值吻合良好.在此基础上,对螺旋桨-舵-舵球组合进行了计算,并比较了舵球设计参数对节能效果的影响.计算结果表明,舵球可以有效地提高螺旋桨的效率,在舵球直径与螺旋桨直径之比为0.292时,其节能效果最好,达7.66%. 相似文献