共查询到20条相似文献,搜索用时 140 毫秒
1.
2.
3.
管路柔性元件声阻抗测试方法研究 总被引:1,自引:0,他引:1
从一维声传播理论出发推导了管路元件的输入和传递声阻抗测量的基本方程,获得了声阻抗数据处理的公式,利用该理论对具有解析解的金属圆柱管段进行了声阻抗测量,验证了测量方法的正确性. 相似文献
4.
柔性去耦覆盖层降噪机理分析 总被引:6,自引:0,他引:6
利用Hankel变换和传递矩阵方法,推导了点激励敷设柔性层系的无限大薄板的辐射声压插入损失和辐射声功率插入损失.理论分析指出,当钢板的质量较大或者频率较高时,柔性层系对于板本身的减振效果实际上很小,辐射噪声降低的主要原因是柔性层系的隔振或隔声作用.辐射声压插入损失与通常所理解的两边都是水时覆盖层的透声系数(及相应的隔声量)没有简单的关系.数值计算表明:(1)低频段存在一个失效区,辐射噪声不降反升;(2)柔性层的损耗越大插入损失提高越多;(3)阻抗渐变的柔性层系的敷设顺序引起的插入损失不同,但均比单层结构有更好的降噪效果. 相似文献
5.
6.
7.
8.
船舶空调通风管路系统的噪声作为舱室内的主要噪声源,一直以来都受到广泛关注。本文根据声源、管路元件以及目标舱室的顺序依次分析计算,提出一种船舶空调通风管路系统的噪声经验预报方法。该方法把管路中各元件产生的气流再生噪声和噪声衰减量按经验公式分别求解,然后按照元件在管路中的布置顺序,得到管路末端声功率级,最后在目标舱室结合统计房间声学计算得到总声压级。该方法的特点是可以在设计初期对目标舱室内空调通风管路系统产生的噪声进行快速预报,无需管路元件的详细参数以及复杂的建模过程。通过计算某型集装箱船的典型房间内噪声声压级,验证了该方法的工程实用价值。 相似文献
9.
10.
11.
对载热体设备的热冲击应力进行了计算,进而总结出防止夹套破裂的对策;通过对配管热应力的分析,得出设计热配管的要点及应对配管热膨胀的方法. 相似文献
12.
为了探讨浮筏装置在多扰动源下所具有的特性以及隔振设计技术,基于船舶水泵机组隔振浮筏这种多扰动源的系统,利用有限元法数值模拟了隔振系统的模型,分析了多扰动源参数以及空问管系对浮筏隔振系统隔振性能的影响,水泵机组的隔振设计技术以及为了提高隔振性能而应注意的若干方面。分析结果表明:多扰动源激励对系统的隔振性能影响显著,空间管系减弱了系统的隔振性能,在动力设备和管路间使用挠性接管等弹性连接可减小管系的影响。 相似文献
13.
14.
15.
16.
Thesubsea dynamic riser base (SDRB) is an important piece of equipment for the floating production platform mooring system.One end is connected to the rigid pipeline, carrying a rigid pipeline thermal expansion load and the other end is connected to a flexible riser, carrying the dynamic load of the flexible riser, so its function is a transition connection between the flexible riser and the rigid pipeline which fixes the flexible riser on the seabed. On the other hand. as a typical subsea product, the design will satisfythe requirements of the standards for subsea products. By studying the stress analysisphilosophy of the topside piping and subsea pipeline, a physical model and procedure for piping stress analysis of the SDRB have been established.The conditions of the adverse design load have been considered, and a combination of the static load from the rigid pipeline and the dynamic load flexibility has also been optimized. And a comparative analysis between the AMSE, DNV and API standards for piping stress with the checking rules has been done.Because theSDRB belongs to the subsea pipeline terminal product, the use of DNV standards to check its process piping stress is recommended. Finally, the process piping stress of the SDRB has been calculated, and the results show that the jacket pipe and the carrier pipe stress of the SDRB process piping satisfy the DNV standards as a whole.The bulkhead cannot be accurately simulated by the AutoPIPE software which uses the FEA software ANSYS inthe detailed analysis, but the checking results will still meet the requirements of the DNV standards. 相似文献
17.
文中介绍了船舶防污设备检查的要领并结合防污检查中发现的违章排污行为分析了船舶违章排放油污水的几种可能情况,有针对性地提出机舱舱底水管系检查的方法和改善海洋环境的可行性建议。 相似文献
18.
19.
20.
本文主要介绍了在AutoCAD2005平台下的船舶管系支架系统,此系统以Viusal studio 2002和ObjectARX2005为开发工具,实现了管子支架的智能化设计.管子支架设计系统提供了11种标准管子支架,每一种管子支架又可以衍生出2~4种变体,这样基本上能满足船舶生产设计中管子支架的设计.本系统主要的特点是,能灵活创建形状复杂的组合式支架,能够自动的由设计好的管子支架三维图形生成二维工程图,用于管子支架的生产和安装. 相似文献