共查询到20条相似文献,搜索用时 62 毫秒
1.
为进一步改善传统船用轴带电机冷却困难、铁芯利用率低和响应速度慢等缺点,提出轴-径向复合磁场结构的船用轴带电机。根据中小型内河船的工作需要,结合解析法和有限元分析法确定电机各项参数,在Ansoft Maxwell 14. 0软件中进行性能验证,并在MATLAB/SIMULINK中搭建基于船舶轴带发电机Z源逆变器的电压矢量脉宽调制(Space Vector Pulse Width Modulation,SVPWM)控制模型。通过仿真波形,验证了所设计的电机性能良好,相电流与相电压可保持同相位。在直流电压恒定时,改变直通零矢量的占空比,可获得系统要求的电压,且Z源逆变器的升压和并网能力得以实现。 相似文献
2.
3.
4.
本文提出应用Ansys电磁分析模块,采用场路耦合时步瞬态有限元方法,直接对计算模型施加电压激励,得到电机的电流和负载磁场,该方法可直接应用到电机的起动计算和短路计算. 相似文献
5.
6.
为了研究异步感应电机矢量控制系统动态性能,利用Matlab/Simulink建立了基于电压空间矢量脉宽调制(SVPWM)的感应电机矢量控制模型,并对电机的启动性能以及负载为阶跃输入情况进行了仿真分析。仿真结果表明所构建的系统模型动态过程符合实际调速系统运动过程。 相似文献
7.
用常规方法对双凸极电机空载电磁场进行了计算,提出了双凸极电机电磁场有限元分析方法,应用有限元软件ANSYS对电机的静态电磁场进行了仿真计算。结果表明采用有限元方法仿真的结果和同实际情况基本相符。 相似文献
8.
9.
10.
船舶电机的轴系不仅起到传递转距和功率的作用,也起到动力系统调速的作用,是船舶动力系统的关键装置。由于船舶电机的轴系在正常运行过程中受到外界激励作用,会产生受迫振动和扭转振动等多种振动形式,影响电机轴系的工作稳定性,甚至造成结构出现疲劳破坏。针对这一问题。本文通过建立船舶轴系的多体动力学模型,结合有限元仿真软件Ansys对电机轴系的扭转振动进行仿真分析,仿真过程包括有限元模型的建立、边界条件和约束条件的施加、扭转振动的求解以及后处理等环节。 相似文献
11.
《船舶与海洋工程学报》2014,(2)
正In the paper"Influence of Fouling Assemblage on the Corrosion Behaviour of Mild Steel in the Coastal Waters of The Gulf of Mannar,India"in Vol.12,No.4,Page:509,References were lost,and the two authors’biographies were identical.The correct text is shown below.We apologize to the authors and our readers for any inconvenience caused by the errors. 相似文献
13.
《船舶与海洋工程学报》2014,(4)
正St.John's,Newfoundland,Canada,May 31-June 5,2015 OMAE2015 is the ideal forum for researchers,engineers,managers,technicians and students from the scientific and industrial communities from around the world to: meet and present advances in technology and its scientific support; 相似文献
14.
联合作战计划和执行系统 总被引:2,自引:1,他引:1
全球指挥控制系统(GCCS)实施当前美国海军网络中心战信息基础设施的联合计划网络。联合作战计划和执行系统(JOPES)支持GCCS实现联合计划。JOPES有两类计划:时间不限的精密预案计划生成作战计划、方案计划或职能计划;时间敏感的危机行动计划生成作战命令或战役方案。前者在和平时期创建的作战计划是后者的计划基础,加速应付危机的能力。 相似文献
15.
In terms of equal sailing distances, where is the inflexion when ships depart from ports in the Asian Continent to New York via Suez and/or Panama?
The answer is China South Port Group (Hong Kong, Shenzhen and Guangzhou). 相似文献
The answer is China South Port Group (Hong Kong, Shenzhen and Guangzhou). 相似文献
16.
Recent measurements of wave induced hull strain and flexure in RN warships are presented together with the derivation of the current design criteria for extreme hull girder bending loads. The history of the development of the shipboard instrumentation used is given and recent developments to improve the quality and ease of analysis of the data are described. An unexpectedly high transverse asymmetry in the longitudinal strains measured in destroyers is shown to be the result of a combination of vertical and lateral bending in oblique seas. Finally recent theoretical comparisons between the loading of Deep-Vee hulls and conventional UK rounded bilge hulls are presented which demonstrate the higher loading experienced by this type of hull form. 相似文献
17.
桥梁防撞设施物理模型试验 总被引:1,自引:0,他引:1
物理模型试验是预报防撞设施所受撞击力及优化设计方案的主要方法之一。结合杭州湾大桥柔性防撞设施及东海大桥独立式防撞体设计方案,阐述了船—防撞体撞击试验的基本原理、方法、试验方案及相关试验结果。提出了柔性防撞系统的优化方案。试验结果表明,该方案经济有效,可供预报类似桥梁防撞设施撞击力时参考。 相似文献
18.
印尼某电厂项目码头水工建筑物包括码头、防波堤和护岸等主要组成部分。在该项目水工建筑物的设计过程中,综合考虑当地的自然条件、施工能力和材料来源等因素,不断优化结构选型和结构断面。根据不同使用要求,护岸分别采用直立式和斜坡式2种结构型式,推荐的设计方案节省投资、施工方便,可供同类工程设计参考。 相似文献
19.
Gunnar Alexandersson Staffan Hultén Frode Longva 《Research in Transportation Economics》2010,29(1):212-218
Despite the many socio-economic similarities between Sweden and Norway, differences in jurisdiction, organisation, cooperation, and financing of long-distance passenger train and coach services have led to the development of four distinctively different ways of serving the markets. This paper describes how the train and coach markets have developed in the two countries, with emphasis on regulatory and industrial structure and a couple of performance variables.Looking at passenger rail, both countries separated infrastructure from operation over a decade ago. However, while Norwegian rail is characterised by an almost monopoly supplier, rail services in Sweden are partly decentralised to the responsibility of county authorities and are widely subjected to competitive tendering. The rest of the network is about to be opened up for on-the-track competition. Swedish Rail (SJ) has spent the last decades consolidating its core business (passenger rail) and sold out its other businesses. In contrast, the Norwegian state rail (NSB) has expanded its business to become a major bus operator and property owner, with extensions also into the Swedish market.The coach industry was more recently deregulated in both countries. The Swedish coach market is dominated by privately owned companies operating services to and from Stockholm. In Norway, state-owned NSB is a major coach operator on medium distance routes, and is also the largest partner of Nor-Way Bussekspress which totally dominates long-distance coach services. Further, the Norwegian coach market is characterised by cross-ownership and cooperation which has enabled an extensive route network which covers most of Norway.We find distinct differences in achievements in the two modes and in the two countries. Swedish rail services have succeeded in winning market shares and in renewing and developing both infrastructure and service levels to a greater extent than the Norwegian model. On the other hand, the Norwegian coach market seems to be more developed and efficient compared to its Swedish counterpart.The paper concludes with a discussion on the possible links between the different approaches and the performance observed, with the aim to stimulate further and more detailed research on some important issues. 相似文献