Parametric dependencies of the post-ultimate strength behavior of a ship’s hull girder in waves

To rationally assess the consequence of a ship’s hull girder collapse, it is necessary to know the post-ultimate strength behavior of the hull girder including the global deformation and motions under extreme wave-induced loads. In the foregoing research, the authors proposed a numerical analysis system to predict the collapse behavior in waves including the post-ultimate strength behavior. The primary objective of the present paper is to clarify the parametric dependencies of the severity of the collapse in a rational manner. The parameters may include those related to load-carrying capacity and the extreme loads. To this end, an analytical solution to describe the post-ultimate strength behavior is derived. Assuming that a plastic hinge is formed at the midship during the collapse procedure, the whole ship is modeled as a two-rigid-bodies system connected to each other amidship via a nonlinear rotational spring, which represents the nonlinear relationship between the bending moment and the rotational angle. The relationship may be modeled as piece-wise linear curves. It is further assumed that large motions and elastic/plastic deformations of the hull girder may not affect the load evaluations, and that the hull girder is subjected to a large single wave. Some important parameters to predict the severity of the collapse are specified based on the analytical solution.     

Numerical modeling of breaking waves generated by a ship’s hull

A new model for the simulation of spilling breaking waves in naval flows is presented. The hydrostatic pressure is used in order to mimic the weight of the breaker on the underlying flow, as in the model of Cointe and Tulin, whereas the algorithm for detecting the breaking inception and the definition of its geometry are completely new and are suitable for the simulation of three–dimensional flows around ships hulls. The model has been implemented in a finite-volume code developed for naval flows, and its performances have been validated against experimental data for a submerged profile, an S60 hull in drift motion, and the US Combatant DTMB 5415 model on a straight course.     

A sensitivity analysis of a hull’s local characteristic parameters on ship resistance performance

Simulation-based design hull form optimization has become one of the most effective ways to develop energy-saving ships. However, the traditional method is time consuming and inefficient, so it is difficult to apply it to practical engineering. One of the reasons for this difficulty is that there are numerous parameters for expressing the hull form, making it difficult to find the optimal solution within a short amount of time. Therefore, this paper presents a sensitivity analysis method based on radial basis function and partial least squares regression neural network with uniform design for sampling, to study the sensitivity of local hull parameters of a class of container ships on wave-making resistance performance, and to reduce the number of dimensions in the design space. According to the results of sensitivity analysis, the parameters that are of negligible influence on the objective function can be removed from the optimization model. Comparison of results of the original model and the simplified model shows that the presented sensitivity analysis method can effectively reduce the dimension of the design space so that the time consumed to achieve the optimum is decreased.     

Analyzing the dispersion of cargo vapors around a ship’s superstructure by means of wind tunnel experiments

In a previous study, it was found that cargo tank operations like cleaning and venting, lead to higher cargo vapor concentrations around the ship’s superstructure. Can wind tunnel experiments confirm these findings? Is there an improvement when using higher outlets at high velocities compared to lower outlets with a low outlet velocity? Is there a relation between relative wind speed and measured concentration? These questions were investigated in the Peutz wind tunnel. By using a tracer gas for the wind tunnel experiments, concentration coefficients have been calculated for various settings. The study shows that using high-velocity outlets is an efficient way to keep concentrations as low as possible. The only exception is for relative wind directions from the bow. In this last case using a manhole as ventilation outlet leads to lower concentrations. With increasing wind speeds the building downwash effect resulted in higher concentration coefficients near the main deck. This study confirms our on-board measurements and suggests the lowering of the ventilation inlet of the accommodation, so that the high-velocity outlet can be used safely at all times.     

A new formulation of the impact mechanics of ship collisions and its application to a ship–iceberg collision

A new formulation is proposed for the analysis of the impact mechanics of ship collisions that can be applied to both 2D and 3D cases. It is assumed that the impact force is large, and all other forces except the impact forces are neglected. The equations of motion are solved in a local coordinate system, and a transformation matrix between the global and the local coordinate system is proposed. The mass and inertia properties are formulated in the local coordinate system. The orientation of the local coordinate system is determined by the hull shape of the struck ship at the contact point. A closed form solution of the external mechanics of ship collisions is derived. Excellent agreement with an alternative 2D formulation for ship–ship collisions is achieved. The features of the proposed 3D method are demonstrated by numerical examples. An application of the method to estimate the required energy dissipation in ship–iceberg collisions is included. Results and discussions are presented and finally, conclusions are made.     

The interaction of oblique flexural gravity waves with a small bottom deformation on a porous ocean-bed: Green’s function approach

The interaction of oblique incident water waves with a small bottom deformation on a porous ocean-bed is examined analytically here within the framework of linear water wave theory. The upper surface of the ocean is assumed to be covered by an infinitely extended thin uniform elastic plate, while the lower surface is bounded by a porous bottom surface having a small deformation. By employing a simplified perturbation analysis, involving a small parameter δ(=1), which measures the smallness of the deformation, the governing Boundary Value Problem (BVP) is reduced to a simpler BVP for the first-order correction of the potential function. This BVP is solved using a method based on Green’s integral theorem with the introduction of suitable Green’s function to obtain the first-order potential, and this potential function is then utilized to calculate the first-order reflection and transmission coefficients in terms of integrals involving the shape function c(x) representing the bottom deformation. Consideration of a patch of sinusoidal ripples shows that when the quotient of twice the component of the incident field wave number propagating just below the elastic plate and the ripple wave number approaches one, the theory predicts a resonant interaction between the bed and the surface below the elastic plate. Again, for small angles of incidence, the reflected wave energy is more as compared to the other angles of incidence. It is also observed that the reflected wave energy is somewhat sensitive to the changes in the flexural rigidity of the elastic plate, the porosity of the bed and the ripple wave numbers. The main advantage of the present study is that the results for the values of reflection and transmission coefficients obtained are found to satisfy the energy-balance relation almost accurately.     

Application of the Grey topological method to predict the effects of ship pitching

Ship motion,with six degrees of freedom,is a complex stochastic process.Sea wind and waves are the primary influencing factors.Prediction of ship motion is significant for ship navigation.To eliminate errors,a path prediction model incorporating ship pitching was developed using the Gray topological method,after analyzing ship pitching motions.With the help of simple introduction to Gray system theory,we selected a group of threshold values.Based on an analysis of ship pitch angle sequences over 40 second intervals,a Grey metabolism GM(1,1) model was established according to the time-series which every threshold corresponded to.Forecasting future ship motion with the GM(1,1) model allowed drawing of the forecast curve with effective forecasting points.The precision of the test results show that the model is accurate,and the forecast results are reliable.     

Determining the hydrodynamic forces on a planing hull in steady motion

A combination of methods was developed that can determine hydrodynamic forces on a planing hull in steady motion.Firstly,a potential-based boundary-element method was used to calculate the hydrodynamic pressure,induced resistance and lift.Then the frictional resistance component was determined by the viscous boundary layer theory.Finally,a particular empirical technique was applied.to determine the region of upwash geometry and determine spray resistance.Case studies involving four models of Series 62 planing craft were run.These showed that the suggested method is efficient and capable,with results that are in good agreement with experimental measurements over a wide range of volumetric Froude numbers.     

Application of H∞ control in rudder/flap vector robust control of a ship＇s course

Given the uncertainty of parameters and the random nature of disturbances that effect a ships course, a robust course controller should be designed on the basis of rudder/flap vector control. This paper analyzes system uncertainty, and the choice of weighting functions is also discussed. When sea waves operate on a ship, the energy-concentrating frequency varies with the angle of encounter. For different angles of encounter, different weighting functions are designed. For the pole of a nominal model existing in an imaginary axis, the bilinear-transform method is used. The ＂2-Riccati＂ equation is adopted to solve the H∞ controller. A system simulation is given, and the results show that, compared with a PID controller, this system has higher course precision and more robust performance. This research has significant engineering value.     

A connectivity reliability-cost approach for path selection in the maritime transportation of China’s crude oil imports

The focus of this paper is the selection of paths for the maritime transportation of crude oil. In addition to transportation cost, the nodes in a maritime transportation network are always affected by extreme events. Therefore, connectivity reliability must be considered during path selection. In this paper, uncertainty variables are introduced to describe the connectivity reliability of nodes under the influence of extreme events, and an uncertain bi-objective programming model with connectivity reliability maximization and transportation cost minimization as objectives is established for path selection. China’s maritime transportation network for crude oil imports is used as a case study to validate the model, the effects of variations in the model parameters on path selection, transportation cost and connectivity reliability are discussed in the case study. The research results provide a basis on which for government decision makers to better plan crude oil transportation strategies.     

Reducing the probability of ship grounding: which measure to undertake?

The analytic hierarchy process has been used to elicit the knowledge of maritime transport stakeholders, such as seafarers, authorities, insurers and academics, regarding human factors and risk-reducing measures for ship groundings. Measures against human fatigue, alcohol abuse, language barriers, poor bridge management and safety climate have been compared with regard to costs and benefits. The measures are discussed in the context of large ships on a voyage of at least 24 h containing Bridge Resource Management. The study shows that stakeholders consider the costs of the measures to reduce human fatigue at sea surpass the benefits. Measures against alcohol abuse are regarded as the most cost–benefit efficient. Also, the stakeholders consider the watch scheme 8–4–4–8 to be less fatiguing than the 12–12 watch scheme. In addition, the results of the study support previous findings that inadequate manning levels contribute the most to human fatigue within the bridge management team.     

Research on low-frequency mechanical characteristics of the MR dampers in ship isolators

A new isolator composed of a steel rope spring and a magneto-rheological(MR) damper was designed and a study on low-frequency mechanical characteristics of MR dampers in isolators was carried out.It used the characteristics of the MR damper,such as fast response,controllable damping,small energy consumption,wide dynamic scope,and great adaptation.The relationships between MR damping forces and influencing factors were analyzed based on experimental data.The results show that damping force is not only related to structural dimensions,but also closely related to controllable current and vibration frequency.Finally,the empirical formula for damping forces was corrected,and the relationship between correction coefficients and factors analyzed.     

Assessing the Impacts of Gender Integration in Ghana’s Fisheries Sector

Abstract

This article presents the results of an impact assessment of a component of a large scale USAID sustainable fisheries management project initiative aimed at integrating gender and strengthening the role of women in fisheries management in Ghana. The assessment is based on a literature review and qualitative field data collection. It assessed gender integration from three entry points: improving the Ghanaian policy environment for gender in fisheries, empowering women post-harvest processors, and engaging women gleaners in fisheries co-management. The assessment found that an important milestone was the adoption and implementation of the Ghanaian Fisheries Sector’s National Gender Mainstreaming Strategy in 2016. Summarizing the impacts on local post-harvest processors and gleaners, the assessment found that female post-harvest processors have increased capacity, confidence, and engagement in fisheries management. Gender mainstreaming efforts have succeeded in challenging cultural norms about women’s role in fisheries. Women have been exposed to sustainable fisheries management and are better equipped with the knowledge and leadership skills to advocate for good fisheries practices, which they actively demonstrate.     

Assessing a maritime service website prototype in a ship bridge simulator: navigators’ experiences and perceptions of novel e-Navigation solutions

The aim of this study was to assess proof of concept and usability of a maritime service website prototype in a full-mission ship bridge simulator through Swedish mariners’ experiences and perceptions. This test was part of the European Commission’s EfficienSea2 project for e-navigation. The prototype was intended as an aid to existing standard systems and methodologies for planning, executing and monitoring voyages. The study began with 5 days of simulator trials focused on today’s standard practices. This served as a baseline to compare to subsequent 4 days of simulator trials testing the prototype. For data collection, observations, video footage, interviews, and eye tracking were used. Data analysis included breaking apart the qualitative data to capture the perceptions of the participants, and a preliminary analysis of eye-tracking data as a complement. The results suggested that the prototype could be more suitable for a route planning stage, that the participants were familiar with similar existing solutions from other manufacturers, and that the contents of the tool would be most beneficial if integrated within the Electronic Chart Display and Information Systems (ECDIS). There is a pressing need for the novel solutions to be user needs-driven, integrated with the existing technologies, and standardized across the domain, and these processes must go hand-in-hand with accounting for all involved stakeholders, procedures, regulations, and training, as this will alter the course of shipping.     

Sense of Place as a Source of Tension in Canada’s West Coast Energy Conflicts

Canada’s west coast has been a hotspot of environmental conflict, most recently in defense of climate action and natural places under threat by energy development. This study examined sense of place as a source of tension in conflicts sparked by two energy proposals. The Bute Inlet run-of-river hydroelectric project would power British Columbia’s remote Central Coast, and the Trans Mountain pipeline expansion would transport bitumen from Alberta’s oil sands to tankers for export. Surveys, interviews, and mapping were used to investigate the depth and character of participants’ sense of favorite places and places expected to be affected by the projects, with appreciation, concern, and responsibility for nature as organizing themes. We discovered a regional, nature-centric sense of place on the south coast, and a sense of place among Albertans linked to that province’s oil and gas economy and its reputation as Canada’s chief breadwinner. Ties to natural places were found to underpin environmental advocacy by tapping into deep place connections as well as place connections conveyed through network ideologies and the protests themselves. We outline for consideration key characteristics of a regional sense of place, and offer ways to mitigate place-based economy versus environment conflicts.     

The reform of Chinese state-owned ship crewing agencies and implications for China’s seafaring labour export

ABSTRACT

With the economic reform in China, the international shipping industry and some academics anticipated, as early as the 1990s, that Chinese seafarers would flood the world’s seafaring labour market. However, China’s seafarer export has been far lower than these expectations. This article seeks to explain this lack of development through research into the management strategies of two major ship crewing agencies in China, which have been reformed to different degrees, and the experience of the seafarers who work for them. To examine this question, 86 interviews of managers and seafarers were conducted in two Chinese state-owned crewing agencies (SCAs) between 2008 and 2013. The studies demonstrate that despite the economic reform in China, the SCAs were still supported and constrained by institutions at higher levels, instead of becoming independent, market-oriented economic entities, which constrained the development of foreign manning business. This partly explains the limited rate of increase of China’s seafarer export.     

Numerical study on breaking phenomena of ships’ waves in narrow and shallow waterways

The environmental impact of a ships waves, such as the risk of erosion of coasts and riverbanks, and unacceptable ship movements in a restricted waterway, is now a significant ship design criterion. Therefore, it is necessary to predict ship-wave phenomena accurately in a restricted waterway. In this study, a numerical investigation of the breaking phenomena of a ships waves in restricted waterways was carried out. Incompressible Navier–Stokes and continuity equations were employed. The equations are discretized by a finite-difference method in a curvilinear coordinate system. The interface capturing method was applied to simulation of a ships waves, including wave-breaking. A modification of the level-set method is proposed to find the free surface shape clearly and without difficulty of the implemation of the boundary conditions for the distance function. In order to obtain a high resolution of wave height, a constrained interpolated profile (CIP) algorithm is adopted. In order to check the advantage of the CIP method, computations by two numerical methods, the CIP and the 3rd-order up-wind scheme, were compared. The computations for a Wigley hull in restricted waterways were performed and compared with experiments. The phenomena of ships waves in restricted waterways are discussed in order to understand the mechanism of wave-breaking in relation to the change in water depth along a waterway.     

‘Tool port’ to ‘landlord port’: a game theory approach to analyse gains from governance model transformation

This study investigates potential port users’ surplus and terminal operators’ profits due to transforming port governance from the ‘tool port’ model to the ‘landlord port’ model. Although the landlord port model is one of the most adopted and successful port governance models, many ports still operate under other models. Chittagong Port, the largest port in Bangladesh, currently operates under the tool port model, while the country’s second-largest port, Mongla Port, operates under the service port model. Chittagong Port is currently facing many challenges, including capacity expansion and renovation of port facilities. Therefore, we form four hypothetical situations for port governance model transformation, assuming that Chittagong Port will transform to the landlord port model but that Mongla Port will run under the existing governance model. Estimating a Bertrand game model, we present a cost-benefit analysis for port users and terminal operators (or port authorities) in hypothetical game situations. The results reveal that privatising one of the container terminals under a landlord setting is the most profitable scenario for Chittagong Port Authority, but privatising all terminals of Chittagong Port yields the highest users’ surplus. However, privatising two of the terminals while they cooperate yields the lowest users’ surplus.     

Calculation of the Added Mass of a Liquid Tank＇s Bulkheads

The added mass coefficient and the water level indexformulas for the same-phase and anti-phase vibration of rectangularliquid tanks＇ bulkheads were derived based on dry mode theory.Three fluid-structure interaction numerical methods including FluidFEM and Fluid BEM were used in this case. The comparison ofnumerical and theoretical results by the present method shows thatANSYS/FluidS0 is more credible, the NASTRAN/Virtual MassMethod is more suitable for engineering calculations and results ofthe same-phase vibration by the present method is more accurate.