极端波浪与海洋结构物的强非线性作用研究综述

鉴于极端波浪的极大破坏力,其与海洋结构物的强非线性作用研究正日益受到重视。为了评估极端波浪可能带来的严重破坏,有必要对极端波浪作用下海洋结构物的波浪爬升与抨击、强非线性波浪力、结构载荷与运动响应等问题开展深入研究。国内外许多学者采用数值计算、模型实验及小波分析等手段对这些问题开展了探索研究,获得了一些有益的研究结论。该文对极端波浪与海洋结构物相互作用的研究现状和现有结论作了综述,可为进一步开展深入研究提供有益参考。     

Non-linear dynamic analysis of the response of moored floating structures

The complexity of the dynamic response of offshore marine structures requires advanced simulations tools for the accurate assessment of the seakeeping behaviour of these devices. The aim of this work is to present a new time-domain model for solving the dynamics of moored floating marine devices, specifically offshore wind turbines, subjected to non-linear environmental loads. The paper first introduces the formulation of the second-order wave radiation-diffraction solver, designed for calculating the wave-floater interaction. Then, the solver of the mooring dynamics, based on a non-linear Finite Element Method (FEM) approach, is presented. Next, the procedure developed for coupling the floater dynamics model with the mooring model is described. Some validation examples of the developed models, and comparisons among different mooring approaches, are presented. Finally, a study of the OC3 floating wind turbine concept is performed to analyze the influence of the mooring model in the dynamics of the platform and the tension in the mooring lines. The work comes to the conclusion that the coupling of a dynamic mooring model along with a second-order wave radiation-diffraction solver can offer realistic predictions of the floating wind turbine performance.     

顶浪中船舶水动力计算与运动模拟研究

基于计算流体动力学(CFD)方法建立数值波浪水池,对顶浪中航行船舶的水动力与运动进行数值计算研究。推导出一种船舶在波浪中航行的数值模拟的波浪环境表达方法并进行模拟验证,计算不同航速下顶浪中Wigley-III船模所受的水动作用力,以及顶浪中航行的Wigley-III船模的运动。通过将计算结果与DUT(Delft University of Technology)相关的试验数据进行比较,吻合良好。研究表明:基于数值波浪水池的数值模拟较试验更容易实现和控制,能够获得船体周围详细的流场信息,在波浪中舰船水动力性能与运动的研究等方面具有广泛的适用性。     

Wave energy assessments in the Black Sea

The present work aims to evaluate the wave energy resources in the Black Sea basin. The study is focused on the western part of the sea, which is traditionally considered as being more energetic. In order to give a first perspective of the wave climate, a medium-term wave analysis was carried out using in situ measured data. As a further step, a wave prediction system was implemented for the Black Sea. This was based on the simulating waves near-shore model, which is used for both wave generation and near-shore transformation. This methodology has the advantage that a single model covers the full scale of the modelling process. Various tests were performed considering data measured at three different locations. Special attention was paid to the whitecapping process, which is still widely considered to be the weak link in deep water wave modelling. Comparisons carried out against measured data show that the wave prediction system generally provides reliable results, especially in terms of significant wave heights and mean periods. By increasing the resolution in geographical space, the field distributions of wave energy were analysed for both high and average wave conditions. The analysis and the wave prediction system developed are a prerequisite for further investigations extended in time and with increased resolution in the near-shore direction.     

Discussion on the parameters of design waves

In order to respond the discredit on the design wave standard and to recommend new consideration on design wave parameters, based on the long-term distribution of statistic characteristics of waves and the short-term probability properties of sea state defined by giving the return period, the calculation of the return period, the height, the period, and the oceanic wave parameters of the design wave and the forecasting methods are discussed in this paper. To provide references for the operation reliability of floating structures in the extreme sea state, the method of determining the design wave parameters is resurveyed. A proposal is recommended that the design wave, which can be either significant wave with 500-year of the return period, or the maximum wave with 1/N of exceeding probability, 100-year of the return period, can be applied in the engineering design practice.     

利用弱可压SPH计算三维均匀柔性驳水动力系数（英文）

The numerical modelling of the interactions between water waves and floating structures is significant for different areas of the marine sector, especially seakeeping and prediction of wave-induced loads. Seakeeping analysis involving severe flow fluctuations is still quite challenging even for the conventional RANS method. Particle method has been viewed as alternative for such analysis especially those involving deformable boundary, wave breaking and fluid fragmentation around hull shapes. In this paper, the weakly compressible smoothed particle hydrodynamics(WCSPH), a fully Lagrangian particle method, is applied to simulate the symmetric radiation problem for a stationary barge treated as a flexible body. This is carried out by imposing prescribed forced simple harmonic oscillations in heave, pitch and the two-and three-node distortion modes. The resultant,radiation force predictions, namely added mass and fluid damping coefficients, are compared with results from 3-D potential flow boundary element method and 3-D RANS CFD predictions, in order to verify the adopted modelling techniques for WCSPH.WCSPH were found to be in agreement with most results and could predict the fluid actions equally well in most cases.     

半潜平台结构疲劳寿命评估方法比较

为了研究各种疲劳评估方法对海洋结构物疲劳寿命评估结果的影响,利用S-N曲线方法和断裂力学方法分别计算了半潜式海洋平台的疲劳寿命,分析比较了二者计算结果的差别.同时比较了疲劳载荷预报中谱分析方法和设计波法的计算结果,分析研究半潜式海洋平台结构关键节点疲劳应力计算中设计波和载荷参数的确定方法,为半潜式海洋平台的疲劳寿命评估提供依据.经过比较分析,认为S-N曲线方法和断裂力学方法应用于评估海洋结构物疲劳寿命均是可行的,使用设计波法来计算半潜式海洋平台横撑与立柱交点处结构疲劳寿命时应该以60°浪向的横向扭矩为特征设计波浪载荷来决定设计波参数比较合理.     

波浪水池中畸形波生成的研究综述

畸形波具有异常大的波高,容易对海洋结构物造成巨大破坏。世界各大海域均有畸形波发生及其引起的海难记录,其生成机理正引起人们越来越多的关注。在实测畸形波时历的基础上,有必要在实验室中实现畸形波的生成,从而揭示畸形波的生成机理及其对海洋结构物的作用机理。目前,国内外许多学者根据畸形波所产生的海洋环境条件提出了多种多样的畸形波成因假说,并相应地形成了多种畸形波生成模型。色散聚集方法通过控制成分波相位使波浪能量定时定点聚集,简单高效,仍为大多数的畸形波生成研究的首选。在此基础上,部分学者提出或应用了迭代方法对畸形波模拟结果进行优化,以修正非线性波波作用引起的相位、幅值偏离。另一方面,薛定谔方程呼吸子解作为畸形波的一个原型,也在畸形波的生成模拟中得到成功应用。该文针对上述畸形波在数值波浪水池或物理水池中的模拟方法作了综述,可为进一步开展畸形波的机理研究及其对海洋结构物作用机理研究提供基础。     

Mathematical simulation of steep waves at a focus point

Mathematical models simulating steep waves at a focus point are presented in this paper. Simulations of extreme waves in a model basin were used to determine the loads on floating structures induced by the waves. Based on a new wave theory, numerical test results show that the simulation procedure is effective and the induced motion of water particles in the front of waves is an important factor influencing impact loads on floating bodies.     

二维物体上的二阶波浪力

近年来,作用于固定式或浮式海洋结构物上的非线性波浪力正在引起广泛的注意。本文处理了规则波对固定的二维物体的二阶非线性影响,协调地求得了二阶绕射势,并进而得到了二阶定常波浪力和二阶倍频波浪力。 借助于切片理论,此方法和结果似也可用来预估船舶或某些半潜平台的二阶波浪作用力和二阶运动。     

兼具亲水和消浪功能的格型结构防波堤的开发与应用

兼具亲水和消浪功能的格型结构防波堤是新型的环境友好型水工建筑物之一,其主体为置于抛石基床上的整体预制钢筋混凝土格型结构,能够形成包括堤顶通道、挡浪墙和较低高程亲水平台在内的防波堤单元。这种创新型式的防波堤可在沿岸风浪较大区域的海岸建筑物中使用,具有良好的景观效果和应用前景。     

Long term distribution of non-linear wave induced vertical bending moments

A method is proposed for the long-term formulation of wave induced vertical bending moments in ship structures. The non-linearity of the response is represented by an uncertain modelling factor that is calibrated by experimental values. Long term predictions are obtained for a tanker and a container ship hull showing that only in the latter case is the response clearly non-linear and reproduced in the long-term predictions.     

飓风极值波浪数值模拟

飓风浪对于船舶航行、海洋和海岸结构物的安全意义重大,分析工程区设计波要素需要考虑飓风引起的大浪。采用YoungSobey风场模型建立飓风风场,以飓风风场作为第三代波浪模型MIKE 21 SW的驱动场,对发生在大西洋的飓风IRENE引起的飓风浪进行模拟,并将模拟结果与实测浮标数据进行对比。对比结果显示,MIKE 21 SW可以很好地模拟飓风引起的极值波浪要素。     

Numerical simulation of three-dimensional breaking waves

Three-dimensional (3D) wave breaking around bodies of complex geometry has been numerically investigated by use of two types of Navier-Stokes solvers, namely the finite-difference and the finite-volume methods employing rectangular and curvilinear coordinate systems, respectively. Both methods employ the density-function technique to capture the free surface location and can cope with complicated free surface configurations such as breaking waves. The accuracy of the density-function method is examined through the comparison with experimental results, and it is confirmed to be satisfactory when the grid spacing and the time increment are sufficiently small. New computational methods are applied to several problems including 3D breaking waves around ships and wave diffraction around offshore structures. The computed results show good agreement with experimental results indicating that wave breaking phenomena are successfully simulated. The qualitative accuracy, however, could be improved by including the dissipating effect of breaking waves.     

超低频雷达反演海洋内波波长和振幅

利用超低频雷达探测海洋内波是海洋内波探测的新方法,该方法使用1Hz～100Hz频段的电磁波探测海洋内波并反演得到内波振幅和波长等参数.根据超低频电磁波在海水中、海气界面和内波界面处的传播特性以及海洋内波水下结构特点,建立了超低频雷达反演海洋内波振幅、波长模型,并分析了探测的回波信号,仿真结果表明,使用超低频雷达可以反演得到内波振幅和波长.     

基于MPS-FEM耦合方法研究波浪与结构的相互作用（英文）

Nowadays, an increasing number of ships and marine structures are manufactured and inevitably operated in rough sea. As a result, some phenomena related to the violent fluid-elastic structure interactions(e.g., hydrodynamic slamming on marine vessels, tsunami impact on onshore structures, and sloshing in liquid containers) have aroused huge challenges to ocean engineering fields. In this paper, the moving particle semi-implicit(MPS) method and finite element method(FEM) coupled method is proposed for use in numerical investigations of the interaction between a regular wave and a horizontal suspended structure. The fluid domain calculated by the MPS method is dispersed into fluid particles, and the structure domain solved by the FEM method is dispersed into beam elements. The generation of the 2D regular wave is firstly conducted, and convergence verification is performed to determine appropriate particle spacing for the simulation. Next, the regular wave interacting with a rigid structure is initially performed and verified through the comparison with the laboratory experiments. By verification, the MPS-FEM coupled method can be applied to fluid-structure interaction(FSI) problems with waves. On this basis, taking the flexibility of structure into consideration, the elastic dynamic response of the structure subjected to the wave slamming is investigated, including the evolutions of the free surface, the variation of the wave impact pressures, the velocity distribution,and the structural deformation response. By comparison with the rigid case, the effects of the structural flexibility on wave-elastic structure interaction can be obtained.     

Breaking wave at the bow of a fast displacement ship model

We investigated the flow structures under the bow wave generated by a fast displacement ship model (INSEAN model 2340) in the presence of wave breaking. The data acquired were also used for a detailed database for CFD validation. The mean and r.m.s. point-wise values of the wave height were measured by means of a finger probe. The intensity of the breaking wave was taken as the r.m.s value of the wave height. The mean velocity field under the free surface was measured at 0.15 L _PP and 0.2 L _PP downstream of the fore perpendicular by means of a 5-hole Pitot probe. Uncertainty assessment of the wave height and velocity field results was performed following the AIAA Standards S-071-1995. Preliminary CFD results from a RANSE code with a breaking model are shown in comparison with the measured data.     

近岸波浪变形数值模型的比较研究

外海深水区的波浪传播到近岸浅水区时,受到岛屿、地形与建筑物等影响,发生折射、绕射、反射和破碎等一系列变形。准确计算近岸与港内波浪分布,成为港口与海岸工程研究的重要课题。文章在总结波浪数值模拟发展现状的基础上,对目前常用的基于椭圆型缓坡方程的CGWAVE模型、基于Boussinesq方程的MIKE21-BW模型和基于动谱平衡方程的SWAN模型进行了比较研究。     

桁架式Spar平台在波浪中的运动预报与实验测量

基于细长体水动力公式和刚体全非线性运动方程,以及桁架式Spar平台主体与其锚泊系统相互耦合的力和位移边界条件,建立了桁架式Spar平台在波浪中的运动响应预报模型,对其在波浪中的运动和锚泊力进行了预报。通过运动光学测量系统和拉力传感器在哈尔滨工程大学水池对Spar平台模型在波浪中的运动和锚泊力进行了测量。数值预报结果和实验测量进行了比较,结果表明二者符合得很好。