A study of feasibility and potential benefits of organised car sharing in Ireland

In this study, the market potential of car sharing has been evaluated using multiple alternative scenarios which examine the geographic, financial and environmental factors influencing car sharing adoption. The scenarios are applied to the available and collected travel information of the Irish population to estimate the potential impact of introducing car sharing in Ireland. The analysis identified that car owners who travel predominantly on alternative modes, could make significant cost and CO₂ savings through car sharing. A reduction of yearly CO₂ emissions of 86 kt is readily achievable through car sharing, with reductions up to 895 kt possible with appropriate policy and financial support. These figures are comparable to other measures proposed under the Irish National Climate Change Strategy.     

Evaluating the social cost of cruise ships air emissions in major ports of Greece

Detailed NO_x, SO₂ and PM_2.5 emissions have been estimated for cruise ships in the five busiest Greek ports (i.e. Piraeus, Santorini, Mykonos, Corfu and Katakolo) for year 2013. The emissions were analyzed in terms of gas species, seasonality and activity. The total in-port inventory of cruise shipping accounted to 2742.7 tons: with NO_x being dominant (1887.5 tons), followed by SO₂ and PM_2.5 (760.9 and 94.3 tons respectively). Emissions during hotelling corresponded to 88.5% of total and have significantly outweighed those produced during ships’ maneuvering activities (11.5% of total). Seasonality was found to play a major role, as summer emissions and associated impacts were significantly augmented. The anticipated health impacts of ship emissions can reach to €24.3 million or to €5.3 per passenger proving the necessity of control of the emissions produced by cruise ships in port cities or policy and measures towards a more efficient cruise industry.     

Can rail/sail compete with air travel to Cyprus? A comparison of emissions

Rail and sea voyage journeys to Cyprus from a variety of origins are constructed to derive the travel emissions and travel time per person to compare popular aviation routes. The hypothetical ‘slow travel’ routes are approximately eight to ten times longer than flying. Emissions are lower from certain origins by about 100 kg CO₂ per person per round trip under reasonably high occupancy conditions when compared to current direct air services. Emissions from the sea voyages are derived from a sample of 162 marine vessels using the energy efficiency design index for European ships running at 20 knots.     

Environmental benefits from improving transportation efficiency in wood procurement systems

Forest operations use fossil fuels, which should be considered when environmental impact in the wood procurement is of concern. Road freight transportation is the most common operation in timber transportation, and thus is an important source of greenhouse gas emissions. This study assesses the impact of the new larger and heavier vehicles (LHV) on environmental emissions using the synchronized calculation method. The maximum (theoretical) and operational effects of 76 t LHV with calculations made for three weight limits (60, 64 and 68 t) are compared in Finland. Based on Enterprise Resource Planning (ERP) data, environmental energy efficiency (measured in relation to the trip) increased 9.2%. The reduction in fuel consumption was 12.5%, though this is likely to under-estimate the long-term effects that will be achieved when forest operations are fully adjusted to the maximum weight limit. A comparison with the European countries and a preliminary sensitivity analysis of the system demonstrate that the technological development to improve the transporting efficiency is essential for realizing 76 t LHV utilization in Finland.     

Estimating the CO2 intensity of intermodal freight transportation

This paper looks at the environmental effects of shifting from road to rail freight transportation. Little data is available to shippers to calculate the potential CO₂ savings of an intermodal shift. In this paper we analyze a data set of more than 400,000 intermodal shipments to calculate the CO₂ intensity of intermodal transportation as a distinct mode. Our results indicate an average intensity of 67 g of CO₂ per ton-mile, but can vary between 29 and 220 g of CO₂ per ton-mile depending on the specific origin–destination lane. We apply the market area concept to explain the variance between individual lane intensities and demonstrate the complexity in predicting the potential carbon savings in a switch from truckload to intermodal.     

Energy savings in light rail through the optimization of heating and ventilation

This paper discusses the potential for energy savings in heating and ventilation of light rail vehicles. We present the results of a detailed monitoring campaign on one articulated tram in Ghent, Belgium. The results give insight in the energy use for heating and ventilation in light rail as a function of ambient weather conditions. After several months of monitoring, changes in the HV strategy were implemented and the monitoring was continued. Based on this monitoring data, an energy-use model was constructed for HV both before and after the heating and ventilation strategy changes. These models then served as input for a Monte Carlo simulation, providing average energy savings over 1 year as a result of the optimized heating and ventilation strategy.     

Sulphur abatement globally in maritime shipping

In 2016, the International Maritime Organization (IMO) decided on global regulations to reduce sulphur emissions to air from maritime shipping starting 2020. The regulation implies that ships can continue to use residual fuels with a high sulphur content, such as heavy fuel oil (HFO), if they employ scrubbers to desulphurise the exhaust gases. Alternatively, they can use fuels with less than 0.5% sulphur, such as desulphurised HFO, distillates (diesel) or liquefied natural gas (LNG). The options of lighter fuels and desulphurisation entail costs, including higher energy consumption at refineries, and the present study identifies and compares compliance options as a function of ship type and operational patterns.The results indicate distillates as an attractive option for smaller vessels, while scrubbers will be an attractive option for larger vessels. For all vessels, apart from the largest fuel consumers, residual fuels desulphurised to less than 0.5% sulphur are also a competing abatement option. Moreover, we analyse the interaction between global SO_X reductions and CO₂ (and fuel consumption), and the results indicate that the higher fuel cost for distillates will motivate shippers to lower speeds, which will offset the increased CO₂ emissions at the refineries. Scrubbers, in contrast, will raise speeds and CO₂ emissions.     

Carbon emission from urban passenger transportation in Beijing

Urban passenger transport significantly contributes to global greenhouse gas emissions, especially in developing countries owing to the rapid motorization, thus making it an important target for carbon reduction. This article established a method to estimate and analyze carbon emission from urban passenger transport including cars, rail transit, taxis and buses. The scope of research was defined based on car registration area, transport types and modes, the stages of rail transit energy consumption. The data availability and gathering were fully illustrated. A city level emission model for the aforementioned four modes of passenger transport was formulated, and parameters including emission factor of electricity and fuel efficiency were tailored according to local situations such as energy structure and field survey. The results reveal that the emission from Beijing’s urban passenger transport in 2012 stood at 15 million tonnes of CO₂, of which 75.5% was from cars, whereas car trip sharing constitutes only 42.5% of the total residential trips. Bus travel, yielding 28.6 g CO₂, is the most efficient mode of transport under the current situations in terms of per passenger kilometer (PKM) emission, whereas car or taxi trips emit more than 5 times that of bus trips. Although a decrease trend appears, Beijing still has potential for further carbon reduction in passenger transport field in contrast to other cities in developed countries. Development of rail transit and further limitation on cars could assist in reducing 4.39 million tonnes CO₂ emission.     

Green approaches at sea – The benefits of adjusting speed instead of anchoring

In this paper, the concept ‘green approaches’ already used in aviation is applied to cargo transportation at sea. Instead of anchoring outside a port waiting for berth, ships can adjust their speed to arrive just in time for berthing. With improved incentives for reducing speed and shared information about berthing times, green approaches instead of anchoring can be a way to reduce fuel consumption and emissions without increasing the transit times of goods. The present study estimates the benefits to society as a whole for the EU ports in the Baltic Sea with Automatic Identification System data applying a new method using data collected in real time. Data consists of all anchored ships awaiting berth on 40 different occasions in 2015 and are subsequently extrapolated to a year. Fuel consumption by the individual ships, emissions and values are calculated from the detailed data with established models and estimates of unit values. The potential benefits are estimated at 27 million euros per year in the scenario where the near 15,000 anchorings by ships annually awaiting berth may instead start a green approach 12 h prior to arrival and may reduce speed by 25%, using the middle unit values for fuel and emissions. The methodology used in the paper can be applied to estimate the benefits of green approaches in other areas with anchored vessels.     

The impact of competition on container port (in)efficiency

There are many studies on container port efficiency and that seek to understand what factors, such as technical and scale efficiency, private versus public terminal management or macro-economic factors, play on the efficiency score of a given port. There are fewer studies that focus on the role played by the inter-port competitive environment. This role remains difficult to assess. In fact, on the one hand, a port subject to high inter-port competition may record higher efficiency scores due to the pressure from the competitive environment. On the other hand, a port subject to high competition may be forced to over-invest and could therefore records a lower efficiency score. This article investigates this issue and examines how the degree of competition measured at different levels (local, regional and global level) impacts the efficiency score of a given container port. To do so, we implement a truncated regression with a parametric bootstrapping model. The model applied to information gathered for 200 container ports in 2007 and 2010 leads to the following conclusions: port efficiency decreases with competition intensity when measured in a range of 400–800 km (regional level); and the effect from competition is not significant when competition is measured at a local (less than 300 km) or at a global (more than 800 km) level. Estimates also show a tendency for ports who invested from 2007 to 2010 to experience a general decrease in efficiency scores, an element which could be explained by the time lag between the investment and the subsequent potential increase in container throughput.     

Effects of the 80 km/h and variable speed limits on air pollution in the metropolitan area of barcelona

In 2008 the regional government of Catalonia (Spain) reduced the maximum speed limit on several stretches of congested urban motorway in the Barcelona metropolitan area to 80 km/h, while in 2009 it introduced a variable speed system on other stretches of its metropolitan motorways. We use the differences-in-differences method, which enables a policy impact to be measured under specific conditions, to assess the impact of these policies on emissions of NO_x and PM₁₀. Empirical estimation indicate that reducing the speed limit to 80 km/h causes a 1.7–3.2% increase in NO_x and 5.3–5.9% in PM₁₀. By contrast, the variable speed policy reduced NO_x and PM₁₀ pollution by 7.7–17.1% and 14.5–17.3%. As such, a variable speed policy appears to be a more effective environmental policy than reducing the speed limit to a maximum of 80 km/h.     

Regional climate impact of aerosols emitted by transportation modes and potential effects of policies on demand and emissions

The transportation system is one of the main sectors with significant climate impact. In the U.S. it is the second main emitter of carbon dioxide. Its impact in terms of emission of carbon dioxide is well recognized. But a number of aerosol species have a non-negligible impact. The radiative forcing due to these species needs to be quantified. A radiative transfer code is used. Remote sensing data is retrieved to characterize different regions. The radiative forcing efficiency for black carbon are 396 ± 200 W/m²/AOD for the ground mode and 531 ± 190 W/m²/AOD for the air transportation, under clear sky conditions. The radiative forcing due to contrail is 0.14 ± 0.06 W/m² per percent coverage. Based on the forcing from the different species emitted by each mode of transportation, policies may be envisioned. These policies may affect demand and emissions of different modes of transportation. Demand and fleet models are used to quantify these interdependencies. Depending on the fuel price of each mode, mode shifts and overall demand reduction occur, and more fuel efficient vehicles are introduced in the fleet at a faster rate. With the introduction of more fuel efficient vehicles, the effect of fuel price on demand is attenuated. An increase in fuel price of 50 cents per gallon, scaled based on the radiative forcing of each mode, results in up to 5% reduction in emissions and 6% reduction in radiative forcing. With technologies, significant reduction in climate impact may be achieved.     

The effects of physical activity on greenhouse gas emissions for common transport modes in European countries

This paper applies a life cycle methodology to estimate activity-related contributions of transport modes to GHG emissions. The methodology uses national input–output tables, environmental accounts, household budget data and nutritional data to derive food-sector GHG coefficients of consumption for ten European countries. The food energy requirements for each mode of transport are estimated taking account of the modal activity level and energy requirements. Typical national food energy-related emissions for walking, cycling, and driving ranged from 25.6 to 77.3 gCO₂-eq/pass.km, 10.4–31.4 gCO₂-eq/pass.km and 1.7–5.2 gCO₂-eq/pass.km; passenger transport was found to result in no food-related emissions above those for a resting individual. Emissions vary between countries depending on the emissions intensities of their energy sectors as well as food prices and average body weights. A life cycle assessment of modal emissions in the UK is undertaken using the food-energy emissions intensities estimated and car travel was found to have the highest emissions intensity, followed by bus, cycling and walking.     

Influence of driving patterns on vehicle emissions: A case study for Latin American cities

On-board real-time emission experiments were conducted on 78 light-duty vehicles in Bogota. Direct emissions of carbon monoxide (CO), carbon dioxide (CO₂), nitrogen oxides (NO_x) and hydrocarbons (HC) were measured. The relationship between such emissions and vehicle specific power (VSP) was established. The experimental matrix included both gasoline-powered and retrofit dual fuel (gasoline–natural gas) vehicles. The results confirm that VSP is an appropriate metric to obtain correlations between driving patterns and air pollutant emissions. Ninety-five percent of the time vehicles in Bogota operate in a VSP between −15.2 and 17.7 kW ton⁻¹, and 50% of the time they operate between −2.9 and 1.2 kW ton⁻¹, representing low engine-load and near-idling conditions, respectively. When engines are subjected to higher loads, pollutant emissions increase significantly. This demonstrates the relevance of reviewing smog check programs and command-and-control measures in Latin America, which are widely based on static (i.e., idling) emissions testing. The effect of different driving patterns on the city’s emissions inventory was determined using VSP and numerical simulations. For example, improving vehicle flow and reducing sudden and frequent accelerations could curb annual emissions in Bogota by up to 12% for CO₂, 13% for CO and HC, and 24% for NO_x. This also represents possible fuel consumption savings of between 35 and 85 million gallons per year and total potential economic benefits of up to 1400 million dollars per year.     

Estimation of nitrogen oxides emissions from petrol and diesel passenger cars by means of on-board monitoring: Effect of vehicle speed,vehicle technology,engine type on emission rates

NO_X emission rates of 13 petrol and 3 diesel passenger cars as a function of average speed from 10 to 120 km/h, emission class (pre-Euro 1 – Euro 5), engine type were investigated by on-board monitoring on roads and highways of St. Petersburg using a portative Testo XXL 300 gas analyzer. The highest level of NO_X emission 0.5–2.5 g/km was inherent to old pre-Euro 1 petrol cars without a catalytic converter. NO_X emissions rates of Euro 1 and Euro 2 petrol cars changed within 0.15–0.9 g/km, Euro 3 – 0.015–0.27 g/km, Euro 4 – 0.013–0.1 g/km, Euro 5 – 0.002–0.043 g/km. Euro 3 – Euro 4 petrol cars generally satisfied corresponding NO_X Emission Standards (ES), except cold-start period, Euro 5 petrol cars did not exceed ES. Warmed, stabilized engines of Euro 3 – Euro 5 petrol cars showed 5–10 times lower NO_X emission rates than corresponding ES in the range of speed from 20 to 90 km/h. NO_X emission rates of diesel Euro 3 and Euro 4 cars varied from 0.45 to 1.1 g/km and from 0.31 to 1.1 g/km, respectively. Two examined diesel Euro 3 and one Euro 4 passenger vehicles did not satisfy NO_X ES at real use. Euro 3 diesel cars showed 28.9 times higher NO_X emissions than Euro 3 petrol cars and Euro 4 diesel car demonstrated 17.6 times higher NO_X emissions than Euro 4 petrol cars at warmed and stabilized engine at a cruise speed ranging from 30 to 60 km/h.     

Fueling for contingencies: The hidden cost of unpredictability in the air transportation system

The aviation community is increasing its attention on the concept of predictability when conducting aviation service quality assessments. Reduced fuel consumption and the related cost is one of the various benefits that could be achieved through improved flight predictability. A lack of predictability may cause airline dispatchers to load more fuel onto aircraft before they depart; the flights would then in turn consume extra fuel just to carry excess fuel loaded. In this study, we employ a large dataset with flight-level fuel loading and consumption information from a major US airline. With these data, we estimate the relationship between the amount of loaded fuel and flight predictability performance using a statistical model. The impact of loaded fuel is translated into fuel consumption and, ultimately, fuel cost and environmental impact for US domestic operations. We find that a one-minute increase in the standard deviation of airborne time leads to a 0.88 min increase in loaded contingency fuel and 1.66 min in loaded contingency and alternate fuel. If there were no unpredictability in the aviation system, captured in our model by eliminating standard deviation in flight time, the reduction in the loaded fuel would between 6.12 and 11.28 min per flight. Given a range of fuel prices, this ultimately would translate into cost savings for US domestic airlines on the order of $120–$452 million per year.     

How wide should be the adjacent area to an urban motorway to prevent potential health impacts from traffic emissions?

In recent years, several studies show that people who live, work or attend school near the main roadways have an increased incidence and severity of health problems that may be related with traffic emissions of air pollutants. The concentrations of near-road atmospheric pollutants vary depending on traffic patterns, environmental conditions, topography and the presence of roadside structures. In this study, the vertical and horizontal variation of nitrogen dioxide (NO₂) and benzene (C₆H₆) concentration along a major city ring motorway were analysed. The main goal of this study is to try to establish a distance from this urban motorway considered “safe” concerning the air pollutants human heath limit values and to study the influence of the different forcing factors of the near road air pollutants transport and dispersion. Statistic significant differences (p = 0.001, Kruskal–Wallis test) were observed between sub-domains for NO₂ representing different conditions of traffic emission and pollutants dispersion, but not for C₆H₆ (p = 0.335). Results also suggest significant lower concentrations recorded at 100 m away from roadway than at the roadside for all campaigns (p < 0.016 (NO₂) and p < 0.036 (C₆H₆), Mann–Whitney test). In order to have a “safe” life in homes located near motorways, the outdoor concentrations of NO₂ must not exceed 44–60.0 μg m⁻³ and C₆H₆ must not exceed 1.4–3.3 μg m⁻³. However, at 100 m away from roadway, 81.8% of NO₂ receptors exceed the annual limit value of human health protection (40 μg m⁻³) and at the roadside this value goes up to 95.5%. These findings suggest that the safe distance to an urban motorway roadside should be more at least 100 m. This distance should be further studied before being used as a reference to develop articulated urban mobility and planning policies.     

The limits of partial life cycle assessment studies in road construction practices: A case study on the use of hydrated lime in Hot Mix Asphalt

Extensive published literature shows that hydrated lime improves Hot Mix Asphalt (HMA) durability. Its impact on the environmental impact of HMA has not been investigated. This paper presents a comparative Life Cycle Assessment (LCA) for the use of HMA without hydrated lime (classical HMA) and with hydrated lime (modified HMA) for the lifetime of a highway. System boundaries cover the life cycle from cradle-to-grave, meaning extraction of raw materials to end of life of the road. The main assumptions were: 1. Lifetime of the road 50 years; 2. Classical HMA with a life span of 10 years, maintenance operations every 10 years; 3. Modified HMA with an increase in the life span by 25%, maintenance operations every 12.5 years. For the lifetime of the road, modified HMA has the lowest environmental footprint compared to classical HMA with the following benefits: 43% less primary total energy consumption resulting in 23% lower emissions of greenhouse gases. Partial LCAs focusing only on the construction and/or maintenance phase should be used with caution since they could lead to wrong decisions if the durability and the maintenance scenarios differ. Sustainable construction technologies should not only consider environmental impact as quantified by LCA, but also economic and social impacts as well. Avoiding maintenance steps means less road works, fewer traffic jams and hence less CO₂ emissions.     

A network-based dispatch model for evaluating the spatial and temporal effects of plug-in electric vehicle charging on GHG emissions

The well-to-wheel emissions associated with plug-in electric vehicles (PEVs) depend on the source of electricity and the current non-vehicle demand on the grid, thus must be evaluated via an integrated systems approach. We present a network-based dispatch model for the California electricity grid consisting of interconnected sub-regions to evaluate the impact of growing PEV demand on the existing power grid infrastructure system and energy resources. This model, built on a linear optimization framework, simultaneously considers spatiality and temporal dynamics of energy demand and supply. It was successfully benchmarked against historical data, and used to determine the regional impacts of several PEV charging profiles on the current electricity network. Average electricity carbon intensities for PEV charging range from 244 to 391 gCO₂e/kW h and marginal values range from 418 to 499 gCO₂e/kW h.