Carbon emission from urban passenger transportation in Beijing

Urban passenger transport significantly contributes to global greenhouse gas emissions, especially in developing countries owing to the rapid motorization, thus making it an important target for carbon reduction. This article established a method to estimate and analyze carbon emission from urban passenger transport including cars, rail transit, taxis and buses. The scope of research was defined based on car registration area, transport types and modes, the stages of rail transit energy consumption. The data availability and gathering were fully illustrated. A city level emission model for the aforementioned four modes of passenger transport was formulated, and parameters including emission factor of electricity and fuel efficiency were tailored according to local situations such as energy structure and field survey. The results reveal that the emission from Beijing’s urban passenger transport in 2012 stood at 15 million tonnes of CO₂, of which 75.5% was from cars, whereas car trip sharing constitutes only 42.5% of the total residential trips. Bus travel, yielding 28.6 g CO₂, is the most efficient mode of transport under the current situations in terms of per passenger kilometer (PKM) emission, whereas car or taxi trips emit more than 5 times that of bus trips. Although a decrease trend appears, Beijing still has potential for further carbon reduction in passenger transport field in contrast to other cities in developed countries. Development of rail transit and further limitation on cars could assist in reducing 4.39 million tonnes CO₂ emission.     

Measuring transport related CO2 emissions induced by online and brick-and-mortar retailing

We develop a method for empirically measuring the difference in transport related carbon footprint between traditional and online retailing (“e-tailing”) from entry point to a geographical area to consumer residence. The method only requires data on the locations of brick-and-mortar stores, online delivery points, and residences of the region’s population, and on the goods transportation networks in the studied region. Such data are readily available in most countries. The method has been evaluated using data from the Dalecarlia region in Sweden, and is shown to be robust to all assumptions made. In our empirical example, the results indicate that the average distance from consumer residence to a brick-and-mortar retailer is 48.54 km in the studied region, while the average distance to an online delivery point is 6.7 km. The results also indicate that e-tailing increases the average distance traveled from the regional entry point to the delivery point from 47.15 km for a brick-and-mortar store to 122.75 km for the online delivery points. However, as professional carriers transport the products in bulk to stores or online delivery points, which is more efficient than consumers’ transporting the products to their residences, the results indicate that consumers switching from traditional to e-tailing on average reduce their transport CO₂ footprints by 84% when buying standard consumer electronics products.     

Impacts,management and functional planning criterion of forest road network system in Turkey

In this study are proposed impacts, management and functional planning criterion of forest road network system in rural and urban landscapes of Turkey. Road spacing and road density have been inspected concerning forest roads in production, reforestation, national parks and protection forests of rural and urban landscapes of Turkey. The forest road network was the most expensive human activity in the forests both in terms of economics and environmental effects. Public opinion about the environment has increased in recent years. Sustainable land use planning creates a great challenge for rural and urban road network planning. Further improvements of the network are necessary, to provide for people’s needs in the near future. Harmful effects of road network conflict with the principles of sustainability. When making use of the forest ecosystem for various purposes, care must be taken not to spoil the forest structure. To achieve this, forests must be used according to forestry techniques. So, there is a need for a new planning approach, serving the interests of both accessibility and sustainable environment. In rural landscapes, forest road planning standards (slope, width, pavement, drainage etc.) are different in production, forestation, national parks and protection forests. The need for total forest roads in Turkey was 201,810 km, and that 133,693 km portion of which, corresponding to 66.25%, was constructed by the end of 2005. With a view to be capable of conducting modern forestry activities, our country’s forests should be provided with a systematic road network by completing as soon as possible the construction of the remaining portion of such roads.     

Chemical characteristics of the surface soil,herbaceous cover and organic layer of a compacted skid road in a fir (Abies bornmulleriana Mattf.) forest

This study looks at the impacts of timber skidding in a pure fir plantation forest. It compares properties of herbaceous cover, organic layer and surface soil on the skid road and on adjacent undisturbed area. N, P, K, Ca, Mg, Na, Fe, Zn, Mn and Cu are quantified and the mass of herbaceous cover and organic layer, and sand, silt, clay rates, bulk density, compaction and pH of soils were assessed. Both the herbaceous cover and organic layer mass on the skid road were significantly lower than the undisturbed area. The soil of the skid road also had higher bulk density and compaction, and lower organic carbon rates producing much denser and compacted soils. Only P concentration in herbaceous cover samples from skid road was significantly higher, while Ca and Mg contents were considerably lower than undisturbed area. There were no significantly differences in N, K, Na, Fe, Zn, Cu and Mn concentrations of herbaceous cover. Compared to the undisturbed area, the organic layer of the skid road had particularly low K, Na, Fe, Zn, Cu and Mn contents. At 0–5 cm soil depth, P and Fe contents were significantly lower than for undisturbed area but there were no major differences at depth of 5–10 cm.     

A forecast air pollution model applied to a hypothetical urban road pricing scheme: An empirical study in Madrid

Reducing the air pollution from increases in traffic congestion in large cities and their surroundings is an important problem that requires changes in travel behavior. Road pricing is an effective tool for reducing air pollution, as reflected currently urban road pricing outcomes (Singapore, London, Stockholm and Milan). A survey was conducted based on establishing a hypothetical urban road pricing system in Madrid (a random sample size n = 1298). We developed a forecast air pollution model with time series analysis to evaluate the consequences of possible air pollution decreases in Madrid. Results reveal that the hypothetical road pricing for Madrid could have highly significant effects on decreasing air pollution outside of the city and in the inner city during the peak operating time periods of maximum congestion (morning peak hours from 7:00 to 10:00 and evening peak hours from 18:00 to 20:00). Furthermore, this system could have significant positive effects on a shift toward using public transport and non-motorized modes inside the hypothetical toll zone. This reveals that the system has a high capacity to motivate a decrease in air pollution and impose more sustainable behavior for public transport users.     

Do modes of transportation and GPS affect cognitive maps of Londoners?

Legibility has long been recognized as an important factor in creating a good image of a city in individuals’ minds. This image is perceived to assist people in understanding the city, finding their way, and recalling the city. The quality of the image affects individuals’ abilities in way-finding. This is especially important for cosmopolitan and global cities such as London in order to preserve resources and time, manage travel costs, limit pollution (air or noise) and enhance these cities as places to live, work and visit. This research examines the cognitive maps of London drawn by a sample of its residents to discover how different modes of transportation and GPS usage could affect individuals’ urban images. Such research is useful for town planners, local government departments, and urban and transport planners because of the way it considers the legibility of London as and provides a tool to study individuals’ urban images. 101 participants were recruited with at least a two-year residency from both genders (38.6% females and 61.4% males) with the average age of 33.88 and S.D. = 10.63. The results suggest car use has a positive correlation with seeing London in city scale and GPS usage has a negative correlation. Whilst recent studies have shown that there are differences between active travel modes (e.g., walking, bicycle riding or driving a car) and passive modes (e.g., as a passenger taking a bus, train or taxi), this study indicates that GPS usage also influences cognitive maps, with a negative correlation found between GPS usage and drawing maps on a city scale. Other significant associations were found for the car drivers with a positive relation with the number of roads mentioned on the maps, seeing London in city scale and having a two-dimensional façade image of the city in mind.     

How to obtain a healthy journey to school

Danish children walk and cycle a lot and at the same time have one of the best child road safety records in the western part of world. Based on several studies, the paper describes how Denmark has obtained a good child road safety and why Danish children choose to walk and cycle. Child road safety has predominantly been improved due to higher seat belt use and many implemented local safety measures such as campaigns and physical safe routes to school projects. It is mostly safe routes to school projects that include speed reducing measures and signalisation of junctions that are successful. The distance from home to school is an important factor in children’s transport mode choice. Since about half of Danish children have less than 1.5 km to school the decentralised school structure with many fairly small schools is an important reason to the many walking and bicycle journeys. Road design and motorised traffic volumes do influence children’s mode choice, but to a rather limited extent.     

How wide should be the adjacent area to an urban motorway to prevent potential health impacts from traffic emissions?

In recent years, several studies show that people who live, work or attend school near the main roadways have an increased incidence and severity of health problems that may be related with traffic emissions of air pollutants. The concentrations of near-road atmospheric pollutants vary depending on traffic patterns, environmental conditions, topography and the presence of roadside structures. In this study, the vertical and horizontal variation of nitrogen dioxide (NO₂) and benzene (C₆H₆) concentration along a major city ring motorway were analysed. The main goal of this study is to try to establish a distance from this urban motorway considered “safe” concerning the air pollutants human heath limit values and to study the influence of the different forcing factors of the near road air pollutants transport and dispersion. Statistic significant differences (p = 0.001, Kruskal–Wallis test) were observed between sub-domains for NO₂ representing different conditions of traffic emission and pollutants dispersion, but not for C₆H₆ (p = 0.335). Results also suggest significant lower concentrations recorded at 100 m away from roadway than at the roadside for all campaigns (p < 0.016 (NO₂) and p < 0.036 (C₆H₆), Mann–Whitney test). In order to have a “safe” life in homes located near motorways, the outdoor concentrations of NO₂ must not exceed 44–60.0 μg m⁻³ and C₆H₆ must not exceed 1.4–3.3 μg m⁻³. However, at 100 m away from roadway, 81.8% of NO₂ receptors exceed the annual limit value of human health protection (40 μg m⁻³) and at the roadside this value goes up to 95.5%. These findings suggest that the safe distance to an urban motorway roadside should be more at least 100 m. This distance should be further studied before being used as a reference to develop articulated urban mobility and planning policies.     

Long-term impacts of transport infrastructure networks on land-use change: an international review of empirical studies

Improvements in geographical information systems, the wider availability of high-resolution digital data and more sophisticated econometric techniques have all contributed to increasing academic interest and activity in long-term impacts of transport infrastructure networks (TINs) on land use (LU). This paper provides a systematic review of recent empirical evidence from the USA, Europe and East Asia, classified regarding the type of transport infrastructure (road or rail), LU indicator (land cover, population or employment density, development type) and outcome (significance, relationship’s direction) as well as influential exogenous factors. Proximity to the rail network is generally associated with population growth (particularly soon after the development of railway infrastructure), conversion to residential uses and the development of higher residential densities. Meanwhile, proximity to the road network is frequently associated with increases in employment densities as well as the conversion of land to a variety of urban uses including commercial and industrial development. Compared with road infrastructure, the impact of rail infrastructure is often less significant for land cover or population and employment density change. The extent of TINs’ impact on LU over time can be explained by the saturation in TIN-related accessibility and LU development.     

The impact of urban rail transit on commercial property value: New evidence from Wuhan,China

The interaction between rail transit and the urban property market is a vital foundation for planning transit-based policy such as Value Capture and Transit Oriented Development (TOD). Yet only few studies have reported the impact of transit access on commercial property value. This paper presents empirical evidence from Wuhan, China, to enrich the knowledge in the subject area. Spatial autoregressive models were employed to estimate the commercial value capture, based on 676 observations along Wuhan’s metro rail line through the main business districts. Value appreciation was discovered within the 400 m radius of road network distance from Metro stations. The transit access premiums present as two tiers: 16.7% for the 0–100 m core area and approximately 8.0% within the 100–400 m radius. The result demonstrates the potential benefit of adopting value capture and optimising TOD planning to support sustainable urban rail transit investment. Amid rapid urbanisation in China, the evidence reported here could help better inform cities, across the developing world and beyond, of the benefits of adopting rail transit-based policy.     

A traffic noise model for road intersections in the city of Cartagena de Indias,Colombia

Road traffic noise models are fundamental tools for designing and implementing appropriate prevention plans to minimize and control noise levels in urban areas. The objective of this study is to develop a traffic noise model to simulate the average equivalent sound pressure level at road intersections based on traffic flow and site characteristics, in the city of Cartagena de Indias (Cartagena), Colombia. Motorcycles are included as an additional vehicle category since they represent more than 30% of the total traffic flow and a distinctive source of noise that needs to be characterized. Noise measurements are collected using a sound level meter Type II. The data analysis leads to the development of noise maps and a general mathematical model for the city of Cartagena, Colombia, which correlates the sound levels as a function of vehicle flow within road intersections. The highest noise levels were 79.7 dB(A) for the road intersection María Auxiliadora during the week (business days) and 77.7 dB(A) for the road intersection India Catalina during weekends (non-business days). Although traffic and noise are naturally related, the intersections with higher vehicle flow did not have the highest noise levels. The roadway noise for these intersections in the city of Cartagena exceeds current limit standards. The roadway noise model is able to satisfactorily predict noise emissions for road intersections in the city of Cartagena, Colombia.     

Estimation of flow and density using probe vehicles with spacing measurement equipment

Probe vehicles provide some of the most useful data for road traffic monitoring because they can acquire wide-ranging and spatiotemporally detailed information at a relatively low cost compared with traditional fixed-point observation. However, current GPS-equipped probe vehicles cannot directly provide us volume-related variables such as flow and density. In this paper, we propose a new probe vehicle-based estimation method for obtaining volume-related variables by assuming that a probe vehicle can measure the spacing to its leading one. This assumption can be realized by utilizing key technologies in advanced driver assistance systems that are expected to spread in the near future. We developed a method of estimating the flow, density, and speed from the probe vehicle data without exogenous assumptions on traffic flow characteristics, such as a fundamental diagram. In order to quantify the characteristics of the method, we performed a field experiment at a real-world urban expressway by employing prototypes of the probe vehicles with spacing measurement equipment. The result showed that the proposed method could accurately estimate the 5 min and hourly traffic volumes with probe vehicle penetration rate of 3.5% and 0.2%, respectively.     

Validating and improving public transport origin–destination estimation algorithm using smart card fare data

Smart card data are increasingly used for transit network planning, passengers’ behaviour analysis and network demand forecasting. Public transport origin–destination (O–D) estimation is a significant product of processing smart card data. In recent years, various O–D estimation methods using the trip-chaining approach have attracted much attention from both researchers and practitioners. However, the validity of these estimation methods has not been extensively investigated. This is mainly because these datasets usually lack data about passengers’ alighting, as passengers are often required to tap their smart cards only when boarding a public transport service. Thus, this paper has two main objectives. First, the paper reports on the implementation and validation of the existing O–D estimation method using the unique smart card dataset of the South-East Queensland public transport network which includes data on both boarding stops and alighting stops. Second, the paper improves the O–D estimation algorithm and empirically examines these improvements, relying on this unique dataset. The evaluation of the last destination assumption of the trip-chaining method shows a significant negative impact on the matching results of the differences between actual boarding/alighting times and the public transport schedules. The proposed changes to the algorithm improve the average distance between the actual and estimated alighting stops, as this distance is reduced from 806 m using the original algorithm to 530 m after applying the suggested improvements.     

The limits of partial life cycle assessment studies in road construction practices: A case study on the use of hydrated lime in Hot Mix Asphalt

Extensive published literature shows that hydrated lime improves Hot Mix Asphalt (HMA) durability. Its impact on the environmental impact of HMA has not been investigated. This paper presents a comparative Life Cycle Assessment (LCA) for the use of HMA without hydrated lime (classical HMA) and with hydrated lime (modified HMA) for the lifetime of a highway. System boundaries cover the life cycle from cradle-to-grave, meaning extraction of raw materials to end of life of the road. The main assumptions were: 1. Lifetime of the road 50 years; 2. Classical HMA with a life span of 10 years, maintenance operations every 10 years; 3. Modified HMA with an increase in the life span by 25%, maintenance operations every 12.5 years. For the lifetime of the road, modified HMA has the lowest environmental footprint compared to classical HMA with the following benefits: 43% less primary total energy consumption resulting in 23% lower emissions of greenhouse gases. Partial LCAs focusing only on the construction and/or maintenance phase should be used with caution since they could lead to wrong decisions if the durability and the maintenance scenarios differ. Sustainable construction technologies should not only consider environmental impact as quantified by LCA, but also economic and social impacts as well. Avoiding maintenance steps means less road works, fewer traffic jams and hence less CO₂ emissions.     

Cycleways and footpaths: What separation is needed for equivalent air pollution dose between travel modes?

Cycling and walking are being promoted in many urban areas as alternatives to motorised transport for health, environmental, and financial reasons. The reduced congestion and resulting decrease in the overall amount of pollution reduced can be expected to result in health benefits for the community. However, active commuters, due to their increased respiration rates and often increased travel times can expect to receive larger doses of air pollution compared with those using motorised forms of transport. However, given the large dropoff in concentrations away from a road, it can be expected that significant reductions can be achieved even with relatively small increases in separation between the path of cyclists/pedestrians and motor vehicles.This study presents a simple methodology for calculating the separation needed for cyclists and pedestrians to experience the same air pollution dose as car commuters. An example is given based on carbon monoxide (CO) data collected in a field campaign consisting of a car driver, a cyclist and a pedestrian travelling on a 2600 metre loop of road in Auckland. For this case study, the estimated distance from the centreline needed for cyclists and pedestrians to receive an equivalent dose of CO as motorists was found to range from 5.8 to 14.2 m depending on the commuting mode and the dispersion state of the atmosphere at the site. This was equal to a CO concentration reduction of 0.1–0.14 ppm per metre. Recommendations on facility modifications and route selections have been made to make active mode commuting safer.     

Fit-for-duty test for estimation of drivers’ sleepiness level: Eye movements improve the sleep/wake predictor

Driver sleepiness contributes to a considerable proportion of road accidents, and a fit-for-duty test able to measure a driver’s sleepiness level might improve traffic safety. The aim of this study was to develop a fit-for-duty test based on eye movement measurements and on the sleep/wake predictor model (SWP, which predicts the sleepiness level) and evaluate the ability to predict severe sleepiness during real road driving. Twenty-four drivers participated in an experimental study which took place partly in the laboratory, where the fit-for-duty data were acquired, and partly on the road, where the drivers sleepiness was assessed. A series of four measurements were conducted over a 24-h period during different stages of sleepiness. Two separate analyses were performed; a variance analysis and a feature selection followed by classification analysis. In the first analysis it was found that the SWP and several eye movement features involving anti-saccades, pro-saccades, smooth pursuit, pupillometry and fixation stability varied significantly with different stages of sleep deprivation. In the second analysis, a feature set was determined based on floating forward selection. The correlation coefficient between a linear combination of the acquired features and subjective sleepiness (Karolinska sleepiness scale, KSS) was found to be R = 0.73 and the correct classification rate of drivers who reached high levels of sleepiness (KSS ⩾ 8) in the subsequent driving session was 82.4% (sensitivity = 80.0%, specificity = 84.2% and AUC = 0.86). Future improvements of a fit-for-duty test should focus on how to account for individual differences and situational/contextual factors in the test, and whether it is possible to maintain high sensitive/specificity with a shorter test that can be used in a real-life environment, e.g. on professional drivers.     

Changes to commute mode: The role of life events,spatial context and environmental attitude

It has been suggested that commuting behaviours become habitual and that changes to commute mode are more likely at the time of major life events. However, evidence to support this has so far been limited to analyses of small-scale samples. To address this evidence gap, we use two waves of panel data from the UK Household Longitudinal Study (2009/10 and 2010/11) to identify and explain the prevalence of individual change in commute mode from year to year amongst a representative sample of the English working population (n = 15,200). One third of those that cycle or get the bus to work, and one quarter of those that walk to work, are shown to change commuting mode by the following year. Car commuting is more stable, with only one in ten car commuters changing mode by the following year. Commute mode changes are found to be primarily driven by alterations to the distance to work which occur in association with changing job or moving home. Switching to non-car commuting becomes much more likely (9.2 times) as the distance to work drops below three miles. High quality public transport links to employment centres are shown to encourage switches away from car commuting and mixed land uses are shown to encourage switches to active commuting (walking and cycling). Switches away from car commuting are found to be more likely (1.3 times) for those with a pro-environmental attitude. The attitude orientation is shown to precede the behaviour change, demonstrating evidence of ‘cause and effect’. Overall, the study shows that changes in commuting behaviour are strongly influenced by life events, spatial context and environmental attitude.     

The cumulative effect of nuisances from road transportation in residential sectors on the Island of Montreal – Identification of the most exposed groups and areas

Air pollution and road traffic noise are considered to be the two most important nuisances that could negatively affect the quality of life. A prolonged exposure to high concentrations of these pollutants could conduct to various health problems. Studies in environmental equity have often considered these nuisances individually whenever it comes from the same source. The main objective of this paper is to determine if the 15 years of age, those aged 65 and over, visible minorities and low income individuals located in a portion of the Island of Montreal are overrepresented in city blocks characterized by having among the highest levels of transportation-related air pollutants (i.e., ambient concentrations of NO₂ and road traffic noise in decibels (dB(A)). The results show that low-income individuals and, to a lesser extent, visible minorities, are significantly overrepresented in city blocks characterized by the higher levels of NO₂ and road traffic noise in dB(A). Multinomial logistic regression analysis confirms these results, and also shows that young people under 15 years are under-represented in the most polluted areas. However, contrary to the previous bivariate results, people aged 65 and over are negatively and significantly associated with the likelihood of their living in a city block located in an advantaged area after controlling for the independent effects of the other explanatory variables. Moreover, visible minorities are significantly overrepresented in advantaged areas. Considering the observed results, some solutions are identified to reduce road traffic noise and air pollution in the city blocks localized near major traffic arteries.     

Development and validation of a questionnaire to assess pedestrian receptivity toward fully autonomous vehicles

This study analyzes pedestrian receptivity toward fully autonomous vehicles (FAVs) by developing and validating a pedestrian receptivity questionnaire for FAVs (PRQF). The questionnaire included sixteen survey items based on attitude, social norms, trust, compatibility, and system effectiveness. 482 Participants from the United States (273 males and 209 females, age range: 18–71 years) responded to an online survey. A principal component analysis determined three subscales describing pedestrians’ receptivity toward FAVs: safety, interaction, and compatibility. This factor structure was verified by a confirmatory factor analysis and reliability of each subscale was confirmed (0.7 < Cronbach’s alpha < 0.9). Regression analyses investigated associations with scenario-based responses to the three PRQF subscale scores. Pedestrians’ intention to cross the road in front of FAVs was significantly predicted by both safety and interaction scores, but not by the compatibility score. Accepting FAVs in the existing traffic system was predicted by all three subscale scores. Demographic influence on the receptivity revealed that males and younger respondents were more receptive toward FAVs. Similarly, those from urban areas and people with higher personal innovativeness showed higher receptivity. Finally, a significant effect of pedestrian behavior (as measured by the pedestrian behavior questionnaire) on receptivity is explored. People who show positive behavior believed that the addition of FAVs will improve overall traffic safety. Those who show higher violation, lapse and aggression scores, were found to feel more confident about crossing the road in front of a FAV. This questionnaire can be a potential research tool for designing and improving FAVs for road-users outside the vehicles.