Pathways for GHG emission reduction in Norwegian road transport sector: Perspective on consumption of passenger car transport and electricity mix

Electrification of the transport sector is considered as a solution to reduce greenhouse gases (GHGs) emissions and achieve sustainable mobility. Specifically in the case of electrification of passenger vehicles, various industrial and policy initiatives have been introduced. In this article, we present and assess three approaches – pro-technology, pro-simplicity and mix (of the aforementioned approaches) – to achieve target emission reductions in the Norwegian road transport sector. We also assess the influence of including ‘Guarantee of Origin’ certification for the electricity production in accounting for typical consumption electricity mix in Norway.Results show that for the same reductions in tail-pipe GHG emissions, pro-technology, pro-simplicity, and the mix scenario offer 22%, 29% and 28% reduction in the life cycle GHG emissions respectively, compared to the reference scenario in year 2020. However, the pro-simplicity scenario requires 25% reduction in vehicle-km driven compared to the pro-technology scenario, which provides the same passenger car mobility as in the reference case. When the GHG intensity of the electricity mix used to power EVs is corrected to account for actual consumption mix in Norway, a 13% reduction in the net GHG benefit of pro-technology scenario is observed.     

电动汽车充电桩电能计量相关问题研究

根据中央关于加快新基建的决策部署,国内将大力推动充电桩建设。作为实施强制管理的计量器具,充电桩的准确计量可确保电能交易公平公正,支撑国家经济社会高质量发展,满足人民低碳绿色出行需求。文中针对电动汽车充电桩电能计量相关问题进行了探讨,首先分别采集了运行全过程中工频交流输入侧和直流输出侧电压与电流的实时波形曲线,其次利用matlab软件和FFT运算对波形数据进行了详细分析,最后验证了现有符合国家标准的交/直流电能表均可满足充电桩计量要求。     

Vehicle electrification in a developing country: Status and issue,from a well-to-wheel perspective

The increase of public attention, scientific research and political interest in environmental problems associated with transportation has provided the motivation for re-invention of electric vehicles. However the usage of grid-dependent EVs with a high-carbon electricity grid might produce more damage to the environment. This study aims to provide an environmental impact comparison of ICEVs, HEVs and EVs during their usage cycle, by modeling their energy consumption (electricity or fuel) and the supply chains of the supplied energy, (well-to-wheel) based on a life cycle assessment. The results show that running EVs with the existing mixed sources of electrical energy produce larger impacts on the environment 60% of the time; when compared to HEVs. When compared to ICEVs, EVs produce a larger environmental impact on 7 out of 15 environmental impact categories. Overall the environmental impacts of EVs are substantial based on the well-to-wheel analysis. It will continue to be so if no change is made to the methods of electricity generation in the near future. Given that the environmental profile of EVs is linked with the existing national electricity generation mix, the national electricity supply must be made cleaner before the electrification of the urban transport system.     

A computationally efficient simulation model for estimating energy consumption of electric vehicles in the context of route planning applications

The fact that electric vehicles (EVs) are characterized by relatively short driving range not only signifies the importance of routing applications to compute energy efficient or optimal paths, but also underlines the necessity for realistic simulation models to estimate the energy consumption of EVs. To this end, the present paper introduces an accurate yet computationally efficient energy consumption model for EVs, based on generic high-level specifications and technical characteristics. The proposed model employs a dynamic approach to simulate the energy recuperation capability of the EV and takes into account motor overload conditions to represent the vehicle performance over highly demanding route sections. To validate the simulation model developed in this work, its output over nine typical driving cycles is compared to that of the Future Automotive Systems Technology Simulator (FASTSim), which is a simulation tool tested on the basis of real-world data from existing vehicles. The validation results show that the mean absolute error (MAE) of cumulative energy consumption is less than 45 W h on average, while the computation time to perform each driving cycle is of the order of tens of milliseconds, indicating that the developed model strikes a reasonable balance between efficacy of representation and computational efficiency. Comprehensive simulation results are presented in order to exemplify the key features of the model and analyze its output under specific highly aggressive driving cycles for road gradients ranging from −6% to 6%, in support of its usability as a practical solution for estimating the energy consumption in EV routing applications.     

Assessing the impact of long-term mobility choice motivation and short-term mobility means connotation on the use intention of electric cars in rural areas

In this study several hypotheses comprising a heuristic framework derived from rational-choice (RC) premises and regarding some potentially influencing variables on future use intention of different vehicle types are tested with a rural area sample. Especially the differentiation between long-term vs. short-term as well as functional/rational vs. extra-functional/emotional motivators is assessed. Results suggest a predominance of functional motivators and rational connotations over extra-functional/emotional ones. The models to check whether short-term or long-term effects dominate did not clearly confirm a predominance of long-term factors as hypothesized. In several regression models a moderating effect of rational short-term connotations on different long-term motivators was found, thus contributing notably to the prediction of future vehicle use-intention. The need for further research and theory-driven modeling is briefly discussed.     

Greenhouse gas emissions associated with electric vehicle charging: The impact of electricity generation mix in a developing country

Since 2012, the government has been promoting the electric vehicles and the development of related infrastructure to encourage local automakers to explore into the alternatively powered vehicles. However, the benefits of grid-dependent EVs can only be harvested under the condition that their use is coupled with a low carbon electricity grid. Thus, it is an additional challenge for Malaysia's that are largely dependent on fossil fuels for electricity generation. The object of this paper is to perform a well-to-wheel life cycle assessment for calculating the greenhouse gas emissions attributable to the usage of ICEVs, HEVs and EVs in Malaysian scenario. These emission calculations will provide the best information for policymakers, researchers, and investors to make appropriate and effective decisions on policies, research and investments in future transport energy. The results show that running EVs with national grid will produce an average of 7% more GHG emissions than HEVs at the same distance. However, they will produce an average of 19% less GHG emissions than the ICEVs. Overall the GHG emissions produced through the usage of EVs are substantial based on the well-to-wheel analysis, as the environmental profile of EVs is linked with the national grid. Therefore, in order to harvest the benefit of EVs towards climate change and global warming mitigation, massive modernization and transformation should be taken for the development of the national grid towards greener sources.     

Assessing the impact of cornering losses on the energy consumption of electric city buses

In view of the increasing electrification of public city transport, an accurate energy consumption prediction for Battery Electric Buses (BEBs) is essential. Conventional prediction algorithms do not consider energy losses that occur during turning of the vehicle. This is especially relevant for electric city buses, which have a limited battery capacity and often drive curvy routes.In this paper, the additional energy consumption during steering of a BEB is modeled, measured, and assessed. A nonlinear steady-state cornering model is developed to establish the additional energy losses during cornering. The model includes large steer angles, load transfer, and a Magic Formula tire model. Model results show that both cornering resistance and tire scrub of the rear tires cause additional energy losses during cornering, depending on the corner radius and vehicle velocity.The energy consumption model is validated with full scale vehicle tests and shows an average deviation of 0.8 kW compared to the measurements. Analysis of recorded real-world bus routes reveals that on average these effects constitute 3.1% of the total powertrain energy. The effect is even more significant for routes crossing city centers, reaching values up to 5.8%. In these cases, cornering losses can be significant and should not be neglected in an accurate energy consumption prediction.     

齐齐哈尔市中心城区电动汽车及充电设施需求预测研究

在目前能源危机和环境保护的双重制约下,发展电动汽车已经成为解决能源环境问题的新途径。为适应未来电动汽车快速发展的需要及充电设施的合理规划布局,电动汽车及充电设施的需求预测就显得尤为重要。文中分析了影响齐齐哈尔市电动汽车发展规模的影响因素,结合国内其他省市的经验,考虑齐齐哈尔市实际情况,对齐齐哈尔市中心城区的电动汽车和充电设施发展规模进行了合理预测。     

Modeling the effect of electric vehicle adoption on pedestrian traffic safety: An agent-based approach

When operated at low speeds, electric and hybrid vehicles have created pedestrian safety concerns in congested areas of various city centers, because these vehicles have relatively silent engines compared to those of internal combustion engine vehicles, resulting in safety issues for pedestrians and cyclists due to the lack of engine noise to warn them of an oncoming electric or hybrid vehicle. However, the driver behavior characteristics have also been considered in many studies, and the high end-prices of electric vehicles indicate that electric vehicle drivers tend to have a higher prosperity index and are more likely to receive a better education, making them more alert while driving and more likely to obey traffic rules. In this paper, the positive and negative factors associated with electric vehicle adoption and the subsequent effects on pedestrian traffic safety are investigated using an agent-based modeling approach, in which a traffic micro-simulation of a real intersection is simulated in 3D using AnyLogic software. First, the interacting agents and dynamic parameters are defined in the agent-based model. Next, a 3D intersection environment is created to integrate the agent-based model into a visual simulation, where the simulation records the number of near-crashes occurring in certain pedestrian crossings throughout the virtual time duration of a year. A sensitivity analysis is also carried out with 9000 subsequent simulations performed in a supercomputer to account for the variation in dynamic parameters (ambient sound level, vehicle sound level, and ambient illumination). According to the analysis, electric vehicles have a 30% higher pedestrian traffic safety risk than internal combustion engine vehicles under high ambient sound levels. At low ambient sound levels, however, electric vehicles have only a 10% higher safety risk for pedestrians. Low levels of ambient illumination also increase the number of pedestrians involved in near-crashes for both electric vehicles and combustion engine vehicles.     

The impact of car specifications,prices and incentives for battery electric vehicles in Norway: Choices of heterogeneous consumers

Electric vehicles (EVs), specifically Battery EVs (BEVs), can offer significant energy and emission savings over internal combustion engine vehicles. Norway has a long history of research and government incentives for BEVs. The BEV market in Norway allows us to fully examine consumers’ BEV choices influenced by car specifications, prices and government incentives (public bus lanes access, toll waiver and charging stations). The Random-Coefficient Discrete Choice Model (referred to as the BLP model) is applied to understand the choices of heterogeneous personal consumers and business buyers. Our study is instantiated on the entire EV sales data in Norway from 2011 to 2013, as well as a set of demographics at the municipality level. The results suggest significant positive effects of BEV technology improvement, space, toll waiver and charging station density on EV demand for both personal consumers and business buyers. However, the effects on business buyers may be generally less pronounced than on personal consumers. Interestingly, bus lanes access demonstrates a negative impact for personal consumers, possibly due to consumers’ concern regarding bus lane congestion. In addition, preferences on the BEV price can vary statistically among consumers with different income levels. Compared to the BEV technology development, demographical features and municipal incentives may have generally less impacts on market shares within the BEV market.     

Impact of government incentives on the market penetration of electric vehicles in Australia

Incentives to buy and use electric vehicles (EVs) may influence individuals’ decisions to do so. To examine these impacts, a latent class discrete choice model is developed to analyse consumer preferences related to EV attributes and related government incentives. Data was collected from a stated preference survey of 1,076 residents of New South Wales (NSW), Australia. According to the results, the proposed latent constructs classify respondents into five segments. The segments are then used to distinguish respondent behaviours regarding EV attributes and related government incentives. The results show that rebate on the upfront cost of an EV is the most preferred one-off financial incentive, because EVs are expected to be expensive, especially in Australia which has a very small EV market at present. Furthermore, rebates on energy bills and parking fees are also well-received, as these things are expensive in Sydney, Australia. Thus, operational incentives for discounts on energy bills and parking fees may facilitate the success of EVs in NSW.     

Why early adopters engage in interpersonal diffusion of technological innovations: An empirical study on electric bicycles and electric scooters

Early adopters promoting electric vehicles in their social network may speed up market uptake of this technology. Apart from their opinion leader status, few previous research details the motivations which turn early adopters into advocates for innovation who approach the non-adopters among their family and friends, or casual acquaintances.Drawing on a survey among 1398 e-bike and 133 e-scooter early adopters in Austria, personal drivers of engagement in interpersonal diffusion are investigated. Longitudinal data one year later for 157 e-bike users allows tests of causal relations. A complementary sample of 33 network peers illustrates the early adopters’ social impact.Early adopters engage actively in discussing product features, instigating trial behavior and recommending purchase. Analyses by structural equation modeling show that efforts at interpersonal diffusion are driven by opinion leadership, experienced product performance, and perceived normative expectations of others toward pro-environmental technologies. Mediator and moderator analyses underline that opinion leadership is conveyed upon early adopters because personal norms and technophilia qualify them as credible and competent for the specific topic of e-vehicles. Social norm interrelations point to dynamic interactions and discourse between early adopters and their addressees. Evidence from the peer sample suggests though that the persuasive impact of early adopters is small.To accelerate market entry of electric vehicles, public or private agencies should foremost approach early adopters scoring high in the identified drivers, and empower them in their role as multiplicators by providing pre-prepared product information and encouraging them to continuously address peers.     

国内专用汽车发展现状浅析

文章阐述了我国专用汽车的发展概况,从专用汽车技术发展现状出发,分析了我国专用汽车发展中存在的问题以及发展趋势,并提出了相关建议.     

Incorporating institutional and spatial factors in the selection of the optimal locations of public electric vehicle charging facilities: A case study of Beijing,China

In this paper, we present a case study on planning the locations of public electric vehicle (EV) charging stations in Beijing, China. Our objectives are to incorporate the local constraints of supply and demand on public EV charging stations into facility location models and to compare the optimal locations from three different location models. On the supply side, we analyse the institutional and spatial constraints in public charging infrastructure construction to select the potential sites. On the demand side, interviews with stakeholders are conducted and the ranking-type Delphi method is used when estimating the EV demand with aggregate data from municipal statistical yearbooks and the national census. With the estimated EV demand, we compare three classic facility location models – the set covering model, the maximal covering location model, and the p-median model – and we aim to provide policy-makers with a comprehensive analysis to better understand the effectiveness of these traditional models for locating EV charging facilities. Our results show that the p-median solutions are more effective than the other two models in the sense that the charging stations are closer to the communities with higher EV demand, and, therefore, the majority of EV users have more convenient access to the charging facilities. From the experiments of comparing only the p-median and the maximal covering location models, our results suggest that (1) the p-median model outperforms the maximal covering location model in terms of satisfying the other’s objective, and (2) when the number of charging stations to be built is large, or when minor change is required, the solutions to both models are more stable as p increases.     

On-line estimation of state-of-charge of Li-ion batteries in electric vehicle using the resampling particle filter

Accurate battery state-of-charge (SOC) estimation is important for ensuring reliable operation of electric vehicle (EV). Since a nonlinear feature exists in the battery system and particle filter (PF) performs well in solving nonlinear or non-Gaussian problems, this paper proposes a new PF-based method for estimating SOC. Firstly, the relationships between the battery characteristics and SOC are analyzed, then the suitable battery model is developed and the unknown parameters in the battery model are on-line identified using the recursive least square with forgetting factors. The proposed battery model is considered as the state space model of PF and then SOC is estimated. All experimental data are collected from the running EVs in Beijing. The experimental errors of SOC estimation based on PF are less than 0.05 V, which confirms the good estimation performance. Moreover, the contrastive results of three nonlinear filters show PF has the same computational complexity as extend Kalman filter (EKF) and unscented Kalman filter (UKF) for low dimensional state vector, but PF have significantly better estimation accuracy in SOC estimation.     

A traffic noise model for road intersections in the city of Cartagena de Indias,Colombia

Road traffic noise models are fundamental tools for designing and implementing appropriate prevention plans to minimize and control noise levels in urban areas. The objective of this study is to develop a traffic noise model to simulate the average equivalent sound pressure level at road intersections based on traffic flow and site characteristics, in the city of Cartagena de Indias (Cartagena), Colombia. Motorcycles are included as an additional vehicle category since they represent more than 30% of the total traffic flow and a distinctive source of noise that needs to be characterized. Noise measurements are collected using a sound level meter Type II. The data analysis leads to the development of noise maps and a general mathematical model for the city of Cartagena, Colombia, which correlates the sound levels as a function of vehicle flow within road intersections. The highest noise levels were 79.7 dB(A) for the road intersection María Auxiliadora during the week (business days) and 77.7 dB(A) for the road intersection India Catalina during weekends (non-business days). Although traffic and noise are naturally related, the intersections with higher vehicle flow did not have the highest noise levels. The roadway noise for these intersections in the city of Cartagena exceeds current limit standards. The roadway noise model is able to satisfactorily predict noise emissions for road intersections in the city of Cartagena, Colombia.     

Microscopic modeling of large‐scale pedestrian–vehicle conflicts in the city of Madinah,Saudi Arabia

This paper presents a micro‐simulation modeling framework for evaluating pedestrian–vehicle conflicts in crowded crossing areas. The framework adopts a simulation approach that models vehicles and pedestrians at the microscopic level while satisfying two sets of constraints: (1) flow constraints and (2) non‐collision constraints. Pedestrians move across two‐directional cells as opposed to one‐dimensional lanes as in the case of vehicles; therefore, extra caution is considered when modeling the shared space between vehicles and pedestrians. The framework is used to assess large‐scale pedestrian–vehicle conflicts in a highly congested ring road in the City of Madinah that carries 20 000 vehicles/hour and crossed by 140 000 pedestrians/hour after a major congregational prayer. The quantitative and visual results of the simulation exhibits serious conflicts between pedestrians and vehicles, resulting in considerable delays for pedestrians crossing the road (9 minutes average delay) and slow traffic conditions (average speed <10 km/hour). The model is then used to evaluate the following three mitigating strategies: (1) pedestrian‐only phase; (2) grade separation; and (3) pedestrian mall. A matrix of operational measures of effectiveness for network‐wide performance (e.g., average travel time, average speed) and for pedestrian‐specific performance (e.g., mean speed, mean density, mean delay, mean moving time) is used to assess the effectiveness of the proposed strategies. Copyright © 2012 John Wiley & Sons, Ltd.     

Siting public electric vehicle charging stations in Beijing using big-data informed travel patterns of the taxi fleet

Charging infrastructure is critical to the development of electric vehicle (EV) system. While many countries have implemented great policy efforts to promote EVs, how to build charging infrastructure to maximize overall travel electrification given how people travel has not been well studied. Mismatch of demand and infrastructure can lead to under-utilized charging stations, wasting public resources. Estimating charging demand has been challenging due to lack of realistic vehicle travel data. Public charging is different from refueling from two aspects: required time and home-charging possibility. As a result, traditional approaches for refueling demand estimation (e.g. traffic flow and vehicle ownership density) do not necessarily represent public charging demand. This research uses large-scale trajectory data of 11,880 taxis in Beijing as a case study to evaluate how travel patterns mined from big-data can inform public charging infrastructure development. Although this study assumes charging stations to be dedicated to a fleet of PHEV taxis which may not fully represent the real-world situation, the methodological framework can be used to analyze private vehicle trajectory data as well to improve our understanding of charging demand for electrified private fleet. Our results show that (1) collective vehicle parking “hotspots” are good indicators for charging demand; (2) charging stations sited using travel patterns can improve electrification rate and reduce gasoline consumption; (3) with current grid mix, emissions of CO₂, PM, SO₂, and NO_x will increase with taxi electrification; and (4) power demand for public taxi charging has peak load around noon, overlapping with Beijing’s summer peak power.     

Analysis of common-cause and special-cause variation in the deterioration of transportation infrastructure: A field application of statistical process control for structural health monitoring

We present a statistical process control framework to support structural health monitoring of transportation infrastructure. We contribute an integrated, generally-applicable (to various types of structural response data) statistical approach that links the literatures on statistical performance modeling and on structural health monitoring. The framework consists of two parts: The first, estimation of statistical models to explain, predict, and control for common-cause variation in the data, i.e., changes, including serial dependence, that can be attributed to usual operating conditions. The ensuing standardized innovation series are analyzed in the second part of the framework, which consists of using Shewhart and Memory Control Charts to detect special-cause or unusual events.We apply the framework to analyze strain and displacement data from the monitoring system on the Hurley Bridge (Wisconsin Structure B-26-7). Data were collected from April 1, 2010 to June 29, 2011. Our analysis reveals that, after controlling for seasonal effects, linear trends are significant components of the response measurements. Persistent displacement may be an indication of deterioration of the bridge supports. Trends in the strain data may indicate changes in the material properties, i.e., fatigue, sensor calibration, or traffic loading. The results also show that autocorrelation and conditional heteroscedasticity are significant sources of common-cause variation. Use of the control charts detected 43 possible special-cause events, with approximately 50% displaying persisting effects, and 25% lasting longer than one week. Analysis of traffic data shows that unusually heavy loading is a possible cause of the longest special-cause event, which lasted 11 days.     

Estimating the long-term effects of different passenger car technologies on energy/fuel consumption and emissions of greenhouse gases in Europe

Abstract

A stated preference (SP) experiment of car ownership was conducted in Mumbai Metropolitan Region (MMR) of Maharashtra in India. A full factorial experiment was designed to considering various attributes such as travel time, travel cost, projected household income, car loan payment and servicing cost. Data on 357 individuals were collected which resulted in 3213 observations for the calibration of the work trip and recreational trip car ownership models. The car ownership alternatives considered 0, 1 and 2 cars. A multinomial logit framework was used to develop the car ownership model taking the household as a decision unit. The specification and results of the SP car ownership model are discussed. The observed and predicted values matched reasonably when the validity of the SP car ownership model was tested against revealed preference (RP) data. The car ownership models developed in this study exhibit a satisfactory goodness of fit. It is concluded that the SP modelling approach can be successfully used for modelling car ownership decisions of households in developing countries.