Safety impacts of signalized lane merge control at highway work zones

Lane closures due to highway work zones present many challenges to the goal of ensuring smooth traffic operations and a safe environment for both drivers and workers. Late merge behavior at a work zone closure is a dangerous behavior that impacts the traffic conflicts upstream of work zone closures. This paper analyzes the safety impacts of using a signalized lane control strategy at the work zone merge points. To achieve the objective of this research, a field study has been conducted at a highway work zone to collect traffic and driver behavior data, and a two-stage, simulation-based approach is used to analyze the safety impacts of implementing a signalized lane merge control strategy at the studied work zone. In the first stage, micro-simulation models are developed and calibrated based on field data to generate vehicle trajectories. In the second stage, the U.S. Federal Highway Administration’s Surrogate Safety Assessment Model is employed to identify potential conflicts under different traffic conditions. The paper concludes that a proposed signal control device could significantly reduce lane-change conflicts at work zone merge points. In addition, recommendations on the signal cycle length and timing splits are provided.     

Noise prediction for highways in Thailand

A model of highway traffic noise is formulated based on vehicle types. The data were collected from local highways in Thailand with free-flow traffic conditions. First, data on vehicle noise was collected from individual vehicles using sound level meters placed at a reference distance. Simultaneously, measurements were made of vehicles’ spot speeds. Secondly, are data for building the highway traffic noise model. This consists of traffic noise levels, traffic volumes by vehicle classification, average spot speeds by vehicle type, and the geometric dimension of highway sections. The free-flow traffic noise model is generated from this database. A reference energy mean emission level (the basic noise) level for each type of vehicles is developed based on direct measurement of Leq (10 s) from the real running condition of each type of vehicles. Modification of terms and parameters are used to make the model fit highway traffic characteristics and different types of vehicle.     

Scheduling highway work zones with genetic algorithm considering the impact of traffic diversion

Highway work zones caused excessive delay to road users. To reduce user and maintenance costs, work zones shall be designed and scheduled accordingly. An analytical model is developed to jointly optimize work zone lengths and schedule as well as diverted traffic volume for highway maintenance projects, considering time‐varying demand, variable maintenance cost, and various production rates of maintenance crew. With a genetic algorithm, an iterative procedure is developed to search for the optimal solution. A numerical example is illustrated, in which various traffic mitigation plans for a highway maintenance project are evaluated. A sensitivity analysis is conducted, and results indicate the threshold volumes for various conditions (e.g., maintenance crews and capacity of the work zone) at which diverting traffic is desirable. This study demonstrates an effective approach to search for the optimal work zone schedule, which is also applicable to evaluate the effectiveness of traffic diversion plans for a pre‐planned work zone schedule. Copyright © 2012 John Wiley & Sons, Ltd.     

Incorporating work zone configuration factors into speed‐flow and capacity models

This study aims to develop work zone speed‐flow and capacity models, which incorporate work zone configuration factors including the number of work zones, geometrical alignment, work zone speed limit, and work zone length. On the basis of the traffic data from six work zone sites with various work zone configurations, two nonlinear traffic speed and flow models including work zone configuration factors are developed for the uncongested and congested traffic conditions, respectively. A work zone capacity model is proposed on the basis of the two models. The three models can further be used to examine the effects of work zone configuration factors on the speed‐flow relationship and capacity at work zones. Results show that traffic speed, traffic flow, and work zone capacity increase with the posted speed limit. Traffic speed under uncongested conditions decreases with the geometric alignment, the number of work zones, work zone length, and heavy vehicle percentage. Under congested conditions, the increase of the number of work zones is found to exhibit a larger negative impact on the traffic flow than the increase of geometric alignment. The number of work zones is also found to have the largest negative impacts on work zone capacity, followed by the geometric alignment. Short work zone length exhibits a relatively minor contribution to increasing work zone capacity. Copyright © 2014 John Wiley & Sons, Ltd.     

Model for the capacity of the urban signal intersection with work zone

Work zones exist widely on urban arterials in the cities that are undergoing road construction or maintenance. However, the existing studies on arterial work zones are very limited, especially on the work zones at urban intersections, although they have a severe negative impact on the urban traffic system. For the first time, this study focuses on how work zones reduce intersection capacity. A type of widely observed work zone, the straddling work zone that straddles on a road segment and an intersection, is studied. A linear regression model and a multiplicative model suggested by Highway Capacity Manual are proposed respectively to determine the saturation flow rate of the signal intersection with the straddling work zone. The data of 22 straddling work zones are collected and used to evaluate the performances of the proposed models. The results display that the linear regression model outperforms the multiplicative model suggested by Highway Capacity Manual. The study also reveals that reducing approach (or exit) lanes and the mixture of motor vehicles and non‐motor vehicles (and pedestrians) can significantly decrease the capacity of the intersection with straddling work zone. Therefore, in setting a straddling work zone, workers should try to ensure that the intersection approach and exit are unobstructed and set a separation for non‐motors and pedestrians to avoid mixed traffic flow. Copyright © 2016 John Wiley & Sons, Ltd.     

Improved vehicle classification from dual-loop detectors in congested traffic

Vehicle classification is an important traffic parameter for transportation planning and infrastructure management. Length-based vehicle classification from dual loop detectors is among the lowest cost technologies commonly used for collecting these data. Like many vehicle classification technologies, the dual loop approach works well in free flow traffic. Effective vehicle lengths are measured from the quotient of the detector dwell time and vehicle traversal time between the paired loops. This approach implicitly assumes that vehicle acceleration is negligible, but unfortunately at low speeds this assumption is invalid and length-based classification performance degrades in congestion.To addresses this problem, we seek a solution that relies strictly on the measured effective vehicle length and measured speed. We analytically evaluate the feasible range of true effective vehicle lengths that could underlie a given combination of measured effective vehicle length, measured speed, and unobserved acceleration at a dual loop detector. From this analysis we find that there are small uncertainty zones where the measured length class can differ from the true length class, depending on the unobserved acceleration. In other words, a given combination of measured speed and measured effective vehicle length falling in the uncertainty zones could arise from vehicles with different true length classes. Outside of the uncertainty zones, any error in the measured effective vehicle length due to acceleration will not lead to an error in the measured length class. Thus, by mapping these uncertainty zones, most vehicles can be accurately sorted to a single length class, while the few vehicles that fall within the uncertainty zones are assigned to two or more classes. We find that these uncertainty zones remain small down to about 10 mph and then grow exponentially as speeds drop further.Using empirical data from stop-and-go traffic at a well-tuned loop detector station the best conventional approach does surprisingly well; however, our new approach does even better, reducing the classification error rate due to acceleration by at least a factor of four relative to the best conventional method. Meanwhile, our approach still assigns over 98% of the vehicles to a single class.     

Analysis of Work Zone Traffic Behavior for Planning Applications

Abstract

Understanding work zone traffic behavior is important for the planning and operation of work zones. The objective of this paper is to develop a mathematical model of work zone traffic flow elements by analyzing the relationships between speed, flow, and density that can be used to estimate the capacity of work zones. Traffic flow data were collected from 22 work zone sites on South Carolina interstate highways. The scatter plots of the collected data demonstrate that the relationship between speed and density does not follow Greenshields’ linear model. A non-linear hyperbolic model was developed to describe the relationship between speed and density. Using this model the capacity of a work zone was estimated to be 1550 passenger cars per hour for 2-lane to 1-lane closures. Adjustments to this capacity value to consider other types of vehicle as well as the work zone intensity are provided. Highway agencies can use this estimated capacity along with anticipated traffic demand to schedule work zone operations to avoid long periods of over-saturation.

The tapered approach to work zone lane closures used by South Carolina is similar to methods used in work zones throughout the world. The authors believe that the methodology described in this paper for modeling work zone traffic as well as estimating work zone capacity is transferable to other countries. The conversion of actual volumes to passenger car equivalents may have to be modified due to the significant differences in traffic makeup between the United States and other countries.     

Optimal subwork zone operational strategy for short‐term work zone projects in four‐lane two‐way freeways

Roadside trees in Singapore are regularly trimmed for the purpose of traffic safety and roadside tree‐trimming project is one typical type of short‐term work zone projects. To implement such a short‐term work zone project, contractors usually divide an entire work zone into multiple subwork zones with the uniform length. This paper aims to determine an optimal subwork zone strategy for the short‐term work zone projects in four‐lane two‐way freeways with time window and uniform subwork zone length constraints. The deterministic queuing model is employed to estimate total user delay caused by the work zone project by taking into account variable traffic speeds. Based on the user delay estimations, this paper proceeds to build a minimization model subject to time window and uniform length constraints for the optimal subwork zone strategy problem. This paper also presents a variation of the minimization model to examine the impact of unequal subwork zone length constraint. Since these minimization models belong to the mixed‐integer non‐differentiable optimization problems, an iterative algorithm embedding with the genetic simulated annealing method is thus proposed to solve these models. Finally, a numerical example is carried out to investigate the effectiveness of the proposed models. Copyright © 2010 John Wiley & Sons, Ltd.     

A hybrid controller for autonomous vehicles driving on automated highways

This paper addresses the problem of the hybrid control of autonomous vehicles driving on automated highways. Vehicles are autonomous, so they do not communicate with each other nor with the infrastructure. Two problems have to be dealt with: a vehicle driving in a single-lane highway must never collide with its leading vehicle; and a vehicle entering the highway at a designated entry junction must be able to merge from the merging lane to the main lane, again without any collision. To solve these problems, we equip each vehicle with a hybrid controller, consisting of several continuous control laws embedded inside a finite state automaton. The automaton specifies when a given vehicle must enter the highway, merge into the main lane, yield to other vehicles, exit from the highway, and so on. The continuous control laws specify what acceleration the vehicle must have in order to avoid collisions with nearby vehicles. By carefully designing these control laws and the conditions guarding the automaton transitions, we are able to demonstrate three important results. First, we state the initial conditions guaranteeing that a following vehicle never collides with its leading vehicle. Second, we extend this first result to a lane of autonomous vehicles. Third, we prove that if all the vehicles are equipped with our hybrid controller, then no collision can ever occur, and all vehicles either merge successfully or are forced to drop out when they reach the end of their merging lane. Finally, we show the outcome of a highway microsimulation modelled after the Katy Corridor near Houston, Texas: our single-lane highway can accommodate 4000 vehicles per hour with neither drop-outs nor traffic congestion. It is entirely programmed in SHIFT, a hybrid systems simulation language developed at UC Berkeley by the PATH group. This shows that SHIFT is a well suited language for designing safe control laws for autonomous highway systems, among others.     

公路路线设计中运行速度理论检验的方法

我国目前的公路路线设计采用设计速度理论,设计速度是个定值,而多年的实践表明,车辆实际的运行速度总是随公路线形等条件的改变而变化,所以设计速度理论本身存在一定的局限性,需要采用动态的运行速度对公路的路线设计进行安全性检验,以确保行车安全。文章结合设计实例,探讨公路路线设计中运行速度理论检验的方法。     

In-use activity measurements for off-road motorcycles and all-terrain vehicles

Off-road recreation vehicles are an important source of emissions and make a disproportionately high contribution to the emissions inventory. Here 58 off-road motorcycles and 39 all-terrain vehicles (ATVs) were instrumented to collect activity data. The activity data for motorcycles and ATVs varied significantly depending on the type of terrain, the type of off highway vehicle, and personal riding habits. The most rapid transitions in speed were typically observed for motorcycles operated on motocross tracks or in trail riding. Over similar terrain, motorcycles had slightly higher top speeds than the ATVs. The highest observed speeds were for motorcycles in open terrain riding conditions. Interestingly, average speeds were comparable between different types of terrain.     

An improved cellular automata model for heterogeneous work zone traffic

This paper aims to develop an improved cellular automata (ICA) model for simulating heterogeneous traffic in work zone. The proposed ICA model includes the forwarding rules to update longitudinal speeds and positions of work zone vehicles. The randomization probability parameter used by the ICA is formulated as a function of the activity length, the transition length and the volumes of different types of vehicles traveling across work zone. Compared to the existing cellular automata models, the ICA model possesses a novel and realistic lateral speed and position updating rule so that the simulation of vehicle’s lateral movement in work zone is close to the reality. The ICA model is calibrated and validated microscopically and macroscopically by using the real work zone data. Comparisons of field data and ICA for trajectories, speed and speed–flow relationship in work zone show very close agreement. Finally, the proposed ICA model is applied to estimate traffic delay occurred in work zone.     

A practice-ready relocation model for free-floating carsharing systems with electric vehicles – Mesoscopic approach and field trial results

This paper introduces a relocation model for free-floating Carsharing (FFCS) systems with conventional and electric vehicles (EVs). In case of imbalances caused by one-way trips, the approach recommends profit maximizing vehicle relocations. Unlike existing approaches, two types of relocations are distinguished: inter zone relocations moving vehicles between defined macroscopic zones of the operating area and intra zone relocations moving vehicles within such zones. Relocations are combined with the unplugging and recharging of EVs and the refueling of conventional vehicles. In addition, remaining pure service trips are suggested. A historical data analysis and zone categorization module enables the calculation of target vehicle distributions. Unlike existing approaches, macroscopic optimization steps are supplemented by microscopic rule-based steps. This enables relocation recommendations on the individual vehicle level with the exact GPS coordinates of the relocation end positions. The approach is practice-ready with low computational times even for large-scale scenarios.To assess the impact of relocations on the system’s operation, the model is applied to a FFCS system in Munich, Germany within three real world field tests. Test three shows the highest degree of automation and represents the final version of the model. Its evaluation shows very promising results. Most importantly, the profit is increased by 5.8% and the sales per vehicle by up to 10%. The mean idle time per trip end is decreased by 4%.     

Modeling and simulation of vehicle projection arrival–discharge process in adaptive traffic signal controls

Real‐time signal control operates as a function of the vehicular arrival and discharge process to satisfy a pre‐specified operational performance. This process is often predicted based on loop detectors placed upstream of the signal. In our newly developed signal control for diamond interchanges, a microscopic model is proposed to estimate traffic flows at the stop‐line. The model considers the traffic dynamics of vehicular detection, arrivals, and departures, by taking into account varying speeds, length of queues, and signal control. As the signal control is optimized over a rolling horizon that is divided into intervals, the vehicular detection for and projection into the corresponding horizon intervals are also modeled. The signal control algorithm is based on dynamic programming and the optimization of signal policy is performed using a certain performance measure involving delays, queue lengths, and queue storage ratios. The arrival–discharge model is embedded in the optimization algorithm and both are programmed into AIMSUN, a microscopic stochastic simulation program. AIMSUN is then used to simulate the traffic flow and implement the optimal signal control by accessing internal data including detected traffic demand and vehicle speeds. Sensitivity analysis is conducted to study the effect of selecting different optimization criteria on the signal control performance. It is concluded that the queue length and queue storage ratio are the most appropriate performance measures in real‐time signal control of interchanges. Copyright © 2010 John Wiley & Sons, Ltd.     

Control of personal rapid transit systems

The problem of precise longitudinal control of vehicles so that they follow predetermined time-varying speeds and positions has been solved. To control vehicles to the required close headway of at least 0.5 sec, the control philosophy is different from but no less rigorous than that of railroad practice. The preferred control strategy is one that could be called an “asynchronous point follower.” Such a strategy requires no clock synchronization, is flexible in all unusual conditions, permits the maximum possible throughput, requires a minimum of maneuvering and uses a minimum of software. Since wayside zone controllers have in their memory exactly the same maneuver equations as the on-board computers, accurate safety monitoring is practical. The paper discusses the functions of vehicle control; the control of station, merge, and diverge zones; and central control.     

Evaluating speed consistency between successive elements of a two-lane rural highway

The V₈₅ speed reflects the 85th percentile speed of vehicles in a traffic stream passing a given element on the highway section. The large amount of speed differential in V₈₅ between the two successive elements along a highway reflects lack of speed consistency in the highway section. This lack of speed consistency can result in increased crash risk. Recent research points to several problems associated with the conventional method of measuring ΔV₈₅ between successive highway elements: (1) failure to reflect individual vehicle speed profiles; and (2) failure to account for inter-dependence in individual vehicle speeds between successive elements. These problems have serious implications for justifying safety treatment when conventional ΔV₈₅ measure is applied. A number of researchers have suggested that the estimated speed differential based on individual vehicle speed profiles in successive elements is significantly higher than that obtained using the conventional approach. In this paper, we assess the safety implications of using the conventional ΔV₈₅ and introduce a hierarchical model for considering individual vehicles speed consistency. These findings lead to important implications for introducing engineering treatments to improve safety along in two-lane rural highways based on the criteria of speed consistency.     

Traffic assignment in a two-dimensional continuous representation of a traffic network with flow-dependent speeds

The work deals with the assignment of traffic to a two-dimensional continuous representation of a traffic network. An important aspect of the treatment is that the reciprocal of the speed on each road in the network is at all times a linear function of the flow on that road. This speed-flow relationship is generalized to two-dimensional space using travel intensities and taking account of road densities, so that there is direct dependence of speeds upon flows at all points regardless of their location. There is also dependence of flows upon speeds at all points because Wardrop's first assignment principle is adopted. That is, for a given O-D pair, journey times on all routes actually used are identical, and less than journey times on all other possible routes. This results in the identification for each O-D pair of an “assignment zone”, an area within which all trips between that O-D pair are made, and beyond which no such trips are made. For a single O-D pair the assignment zone is identified by ?_m, the maximum angular divergence of a path from the straight line between O and D. Paths are then assumed to be bilinear so that for a single O-D pair the assignment zone is a parallelogram. Journey times, speeds, lateral displacement and other related quantities are obtained as functions of the flow Q between O and D. The work is extended to three O-D pairs located at the extremities of an equilateral triangle and four O-D pairs located at the corners of a square. At low flows these two configurations are trivial extensions of the single O-D pair problem because assignment zones do not overlap. At higher flows account is taken of this tendency to overlapping, so that although they do not overlap they do touch, becoming kite-shaped. Origins and destinations are assumed to be at the periphery of small circles of arbitrary radius. The work is inelegant to the extent that it involves a numerical integration but it is possible that this might eventually be circumvented.     

Effects of the Los Angeles transit strike on highway congestion

In this paper we investigate the effect of the Los Angeles transit strike on highway congestion through analysis of highway sensor data, using both a before-and-after comparison, and a control group comparison. We found that average 5:00 a.m. to 10:00 p.m. traffic speeds declined by as much as 20% during the strike, and the average length of the rush period increased by as much as 200%, even though increases in traffic were small, despite the fact that transit riders constitute a small fraction of the traveling population. Speeds declined the most at locations upstream from the places where queues normally end. We believe that highways are especially susceptible to congestion during strikes because travelers have little opportunity to adjust and equilibrate their travel patterns, as is possible during ordinary periods of traffic growth.     

Development of a sensor system for traffic data collection

Although many types of traffic sensors are currently in use, all have some drawbacks, and widespread deployment of such sensor systems has been difficult due to high costs. Due to these deficiencies, there is a need to design and evaluate a low cost sensor system that measures both vehicle speed and counts. Fulfilling this need is the primary objective of this research. Compared to the many existing infrared-based concepts that have been developed for traffic data collection, the proposed method uses a transmission-based type of optical sensor rather than a reflection-based type. Vehicles passing between sensors block transmission of the infrared signal, thus indicating the presence of a vehicle. Vehicle speeds are then determined using the known distance between multiple pairs of sensors. A prototype of the sensor system, which uses laser diode and photo detector pairs with the laser directly projected onto the photo detector, was first developed and tested in the laboratory. Subsequently this experimental prototype was implemented for field testing. The traffic flow data collected were compared to manually collected vehicle speed and traffic counts and a statistical analysis was done to evaluate the accuracy of the sensor system. The analysis found no significant difference between the data generated by the sensor system and the data collected manually at a 95% confidence interval. However, the testing scenarios were limited and so further analysis is necessary to determine the applicability in more congested urban areas. The proposed sensor system, with its simple technology and low cost, will be suitable for saturated deployment to form a densely distributed sensor network and can provide unique support for efficient traffic incident management. Additionally, because it may be quickly installed in the field without the need of elaborate fixtures, it may be deployed for use in temporary traffic management applications such as traffic management in road work zones or during special events.     

Rear‐end crash potential estimation in the work zone merging areas

This paper proposed a methodology to estimate rear‐end crash potential of the merging vehicles traveling in the merge lane, on the basis of the traffic data extracting from the available videotapes. First, we developed a binary logit model to identify drivers' merging behavior in the work zone merging area. Subsequently, the occurrence potential of rear‐end crash based on time‐to‐collision was computed between the merging vehicle and its neighboring vehicles. The overall crash potential of the merging vehicle was finally determined. It was found that the crash potential decreases with the remaining distance to work zone. Moreover, there will be a rear‐end crash potential of 4.0% if the merging vehicle fails to complete merging at the end of work zone merging area. If the merging vehicle takes an early merge, there will be a lower rear‐end crash potential (1.2%). These findings suggest that we should encourage merging vehicles to take early merges for improving the traffic safety in the work zone merging areas. Copyright © 2012 John Wiley & Sons, Ltd.