Effects of e-bikes on bicycle use and mode share

In Norway, as in many countries, a political goal is to increase bicycle use, and the e-bike is promising in this respect. However, concerns have been raised about mode-share effects. It has been argued that if the e-bike’s only function is in cycling becoming cycling with electric assistance, there would be no benefit to either the environment or public health. Little is yet known about the use of the e-bike, or of its potential in reducing motorized travel. In the current study, 66 randomly selected participants were given an e-bike to use for a limited period of time and the results compared with those of a control group (N = 160). E-bike cycling trips increased from 0.9 to 1.4 per day, distance from 4.8 km to 10.3 km and, as a share of all transport, from 28% to 48%, whereas with the control group there was no increase in cycling. The effect of the e-bike increased with time, indicating a learning effect among users, and was greater for female than for male cyclists. There were no differences with age. Overall, the results suggest that the e-bike is indeed practical for everyday travel.     

The effect of non-recreational transport cycling on use of other transport modes: A cross-sectional on-line survey

Accurate modelling of the health and environmental benefits of non-recreational transport cycling requires information about its effects on the use of other transport modes. Relevant research has not focussed on cycling for transport in a general context (as opposed to bikeshare), nor allowed for multi-modal trips. The influence of trip- and personal-characteristics on whether cycling replaces car-driving have yet to be considered. The present study aimed to address these research gaps. An on-line cross-sectional survey was completed by 1525 Australians who cycle for transport at least once per week. For the most recent trip completed (at least partly) by bicycle participants provided trip distance, and percentage travelled by car, public transport (PT), and walking. They also provided the percentage travelled by each mode for the same trip before taking up transport cycling; and a hypothetical future trip when riding is not possible. Compared to the same trip before, fifty percent of recent trips reduced car use, and around 1/3 eliminated a 100%-car trip. Reduced car use was significantly less likely for trips under 7.5 km, commuting, females, respondents under 55, and regular cyclists. Reduced car use was less likely for respondents who started riding because it is flexible, and more likely for those who started riding to avoid parking. Car-use was reduced by an average of 6.2 km per trip, and each bicycle-km cycled replaced 0.5 car-km. Participants report that since taking up cycling, even when they cannot use their bike, they use cars less and use PT more compared to before they took up cycling. Results suggest that previous studies underestimated the extent to which transport cycling replaces car travel, and highlights trip types and population groups to target with cycling promotion strategies. Information about the per-trip and per-bicycle-km replacement of car, PT and walking may be used for more accurate estimation of the benefits of transport cycling than has hitherto been possible.     

Can rail/sail compete with air travel to Cyprus? A comparison of emissions

Rail and sea voyage journeys to Cyprus from a variety of origins are constructed to derive the travel emissions and travel time per person to compare popular aviation routes. The hypothetical ‘slow travel’ routes are approximately eight to ten times longer than flying. Emissions are lower from certain origins by about 100 kg CO₂ per person per round trip under reasonably high occupancy conditions when compared to current direct air services. Emissions from the sea voyages are derived from a sample of 162 marine vessels using the energy efficiency design index for European ships running at 20 knots.     

Inferring patterns in the multi-week activity sequences of public transport users

The public transport networks of dense cities such as London serve passengers with widely different travel patterns. In line with the diverse lives of urban dwellers, activities and journeys are combined within days and across days in diverse sequences. From personalized customer information, to improved travel demand models, understanding this type of heterogeneity among transit users is relevant to a number of applications core to public transport agencies’ function. In this study, passenger heterogeneity is investigated based on a longitudinal representation of each user’s multi-week activity sequence derived from smart card data. We propose a methodology leveraging this representation to identify clusters of users with similar activity sequence structure. The methodology is applied to a large sample (n = 33,026) from London’s public transport network, in which each passenger is represented by a continuous 4-week activity sequence. The application reveals 11 clusters, each characterized by a distinct sequence structure. Socio-demographic information available for a small sample of users (n = 1973) is combined to smart card transactions to analyze associations between the identified patterns and demographic attributes including passenger age, occupation, household composition and income, and vehicle ownership. The analysis reveals that significant connections exist between the demographic attributes of users and activity patterns identified exclusively from fare transactions.     

Volume and GHG emissions of long-distance travelling by Western Europeans

It is generally recognised that long distance travelling accounts for a significant part of the mileage of person travel. However, estimates have been hardly made. The paper estimates volume and GHG emissions of long-distance travel by Western Europeans. The analysis is predominantly based on data of the DATELINE project, the only EU-wide survey on long-distance travelling, conducted in 2001 and 2002. Some studies demonstrate that DATELINE suffers from serious underreporting of journeys. We analysed the causes for underreporting and developed expansion factors that correct for that. These gave the opportunity to estimate long-distance travel volumes and related GHG emissions in 2001/2002. Next an update to 2013 is made using statistics on the development of tourist travel and patronage of long-distance modes. Defining long distance ⩾100 km crow-fly, the estimates per capita in the Western European countries in 2013 are 7.5 journeys (defined as round-trips), 8600 km, and 1300 kg greenhouse gasses. The estimated total GHG emissions of long-distance travelling is 520 megaton. In the Netherlands and Flanders, countries where data on short-distance travelling were available, long-distance travelling accounts for 45% of the mileage and nearly 50% of the GHG emissions of all person transport. Long-distance travelling is growing and is expected to continue to grow, particularly by air. The GHG emissions are expected to grow as well, though to a smaller extent. Because short-distance travelling is stagnating, the shares of long distance travelling in both mileage and GHG emissions are likely to increase.     

Capitalization of BRT network expansions effects into prices of non-expansion areas

A before and after hedonic model is used to determine the property value impacts on properties already served by the transit system caused by extensions to Bogotá’s bus rapid transit system. Asking prices of residential properties belonging to an intervention area (N = 1407 before, 1570 after) or a control area (N = 267 before, 732 after) and offered for sale between 2001 and 2006 are used to determine capitalization of the enhanced regional access provided by the extension. Properties offered during the year the extension was inaugurated and in subsequent years have asking prices that are between 13% and 14% higher than prices for properties in the control area, after adjusting for structural, neighborhood and regional accessibility characteristics of each property. Furthermore, the appreciation is similar for properties within 500 m and properties between 500 m and 1 km of the BRT.     

Controlled mechanical vibration applied to driver’s right heel to sustain alertness: Effects on cardiovascular behavior

Vehicle-related countermeasures to sustain driver’s alertness might improve traffic safety. The purpose of this study was to investigate the effects of somatosensory 20 Hz mechanical vibration, applied to driver’s right heel during prolonged, simulated, monotonous driving, on their cardiovascular hemodynamic behavior. In 12 healthy young male volunteers, during 90-min periods of simulated monotonous driving, we compared cardiovascular variables during application of 20 Hz mechanical vibration with 1.5 Hz as a control and with no vibration. The parameters recorded were indices of key cardiovascular hemodynamic phenomena, i.e., blood pressure as an indicator of stress, cardiac output, and total peripheral-vascular resistance. The principle results were that all conditions increased the mean blood pressure, and elicited a vascular-dominant reaction pattern typically observed in monotonous driving tasks. However, mean blood pressure and total peripheral-vascular resistance during the monotonous task were significantly decreased in those receiving the 20 Hz vibration as compared with 1.5 Hz and with no vibration. The observed differences indicate the cardiovascular system being more relieved from monotonous driving stress with the 20 Hz vibration. The major conclusion is that applying 20 Hz mechanical vibration to the right heel during long-distance driving in non-sleepy drivers could facilitate more physiologically appropriate status for vehicle operation and could be a potential vehicular countermeasure technology.     

Changes to commute mode: The role of life events,spatial context and environmental attitude

It has been suggested that commuting behaviours become habitual and that changes to commute mode are more likely at the time of major life events. However, evidence to support this has so far been limited to analyses of small-scale samples. To address this evidence gap, we use two waves of panel data from the UK Household Longitudinal Study (2009/10 and 2010/11) to identify and explain the prevalence of individual change in commute mode from year to year amongst a representative sample of the English working population (n = 15,200). One third of those that cycle or get the bus to work, and one quarter of those that walk to work, are shown to change commuting mode by the following year. Car commuting is more stable, with only one in ten car commuters changing mode by the following year. Commute mode changes are found to be primarily driven by alterations to the distance to work which occur in association with changing job or moving home. Switching to non-car commuting becomes much more likely (9.2 times) as the distance to work drops below three miles. High quality public transport links to employment centres are shown to encourage switches away from car commuting and mixed land uses are shown to encourage switches to active commuting (walking and cycling). Switches away from car commuting are found to be more likely (1.3 times) for those with a pro-environmental attitude. The attitude orientation is shown to precede the behaviour change, demonstrating evidence of ‘cause and effect’. Overall, the study shows that changes in commuting behaviour are strongly influenced by life events, spatial context and environmental attitude.     

Cycleways and footpaths: What separation is needed for equivalent air pollution dose between travel modes?

Cycling and walking are being promoted in many urban areas as alternatives to motorised transport for health, environmental, and financial reasons. The reduced congestion and resulting decrease in the overall amount of pollution reduced can be expected to result in health benefits for the community. However, active commuters, due to their increased respiration rates and often increased travel times can expect to receive larger doses of air pollution compared with those using motorised forms of transport. However, given the large dropoff in concentrations away from a road, it can be expected that significant reductions can be achieved even with relatively small increases in separation between the path of cyclists/pedestrians and motor vehicles.This study presents a simple methodology for calculating the separation needed for cyclists and pedestrians to experience the same air pollution dose as car commuters. An example is given based on carbon monoxide (CO) data collected in a field campaign consisting of a car driver, a cyclist and a pedestrian travelling on a 2600 metre loop of road in Auckland. For this case study, the estimated distance from the centreline needed for cyclists and pedestrians to receive an equivalent dose of CO as motorists was found to range from 5.8 to 14.2 m depending on the commuting mode and the dispersion state of the atmosphere at the site. This was equal to a CO concentration reduction of 0.1–0.14 ppm per metre. Recommendations on facility modifications and route selections have been made to make active mode commuting safer.     

Understanding travel behaviour change during mega-events: Lessons from the London 2012 Games

This paper presents results from a longitudinal study of the travel behaviour change associated with the London 2012 Olympic and Paralympic Games (the ‘Games’). The research examines commuter travel behaviour through a panel approach enabling an understanding of individual behaviour across three waves (before, during and after), with the study utilising unique access to a Transport for London panel study (n = 1132). The findings indicate that a substantial amount of change occurred during the Games (54% made at least one change), with reducing or re-timing journeys being the most likely adaptations made. A key objective of this work was to advance the discussion about the theoretical constructs that are most applicable in the study of behaviour change associated with disruptive events, which was done through the application and critical evaluation of the Transtheoretical Model. The insights from the stages of change element of the model were relatively limited but the analysis shows significant differences in the underlying factors explaining change according to the type of change made (reduce, re-time, re-mode and re-route). Whilst the long-term behavioural impacts of events like the Games appear small, the study has uncovered a need to consider these behavioural choices as distinct rather than under the collective term of “travel behaviour change”, as is current practice.     

An empirical assessment of the feasibility of battery electric vehicles for day-to-day driving

Driven by sustainability objectives, Australia like many nations in the developed world, is considering the option of battery electric vehicles (BEVs) as an alternative to conventional internal combustion engine vehicles (ICEVs). In addition to issues of capital and running costs, crucial questions remain over the specifications of such vehicles, particularly the required driving range, recharge time, re-charging infrastructure, performance, and other attributes that will be of importance to consumers. With this in mind, this paper assesses (hypothetically) the extent to which current car travel needs could be met by BEVs for a sample of motorists in Sydney assuming a home-based charging set-up, which is likely to be the primary option for early adopters of the technology. The approach uses five weeks of driving data recorded by GPS technology and builds up home-home tours to assess the distances between (in effect) charging possibilities. An energy consumption model based on characteristics of the vehicle, and the speeds recorded by the GPS is adapted to determine the charge used, while a battery recharge function is used to determine charging times based on the current battery level. Among the most pertinent findings are that over the five weeks, (i) BEVs with a range as low as 60 km and a simple home-charge set-up would be able to accommodate well over 90% of day-to-day driving, (ii) however the incidence of tours requiring out-of-home charging increases markedly for vehicles below 24 kWh (170 km range), (iii) recharge time in itself has little impact on the feasibility of BEVs because vehicles spend the majority of their time parked and (iv) effective range can be dramatically impacted by both how a vehicle is driven and use of electrical auxiliaries, and (v) while unsuitable for long, high-speed journeys without some external re-charging options, BEVs appear particularly suited for the majority of day-to-day city driving in big cities where average journey speeds of 34 km/h are close to optimal in terms of maximising vehicle range. The paper has implications for both policy-makers and auto manufacturers in breaking down some of the (perceived) barriers to greater uptake of BEVs in the future.     

How wide should be the adjacent area to an urban motorway to prevent potential health impacts from traffic emissions?

In recent years, several studies show that people who live, work or attend school near the main roadways have an increased incidence and severity of health problems that may be related with traffic emissions of air pollutants. The concentrations of near-road atmospheric pollutants vary depending on traffic patterns, environmental conditions, topography and the presence of roadside structures. In this study, the vertical and horizontal variation of nitrogen dioxide (NO₂) and benzene (C₆H₆) concentration along a major city ring motorway were analysed. The main goal of this study is to try to establish a distance from this urban motorway considered “safe” concerning the air pollutants human heath limit values and to study the influence of the different forcing factors of the near road air pollutants transport and dispersion. Statistic significant differences (p = 0.001, Kruskal–Wallis test) were observed between sub-domains for NO₂ representing different conditions of traffic emission and pollutants dispersion, but not for C₆H₆ (p = 0.335). Results also suggest significant lower concentrations recorded at 100 m away from roadway than at the roadside for all campaigns (p < 0.016 (NO₂) and p < 0.036 (C₆H₆), Mann–Whitney test). In order to have a “safe” life in homes located near motorways, the outdoor concentrations of NO₂ must not exceed 44–60.0 μg m⁻³ and C₆H₆ must not exceed 1.4–3.3 μg m⁻³. However, at 100 m away from roadway, 81.8% of NO₂ receptors exceed the annual limit value of human health protection (40 μg m⁻³) and at the roadside this value goes up to 95.5%. These findings suggest that the safe distance to an urban motorway roadside should be more at least 100 m. This distance should be further studied before being used as a reference to develop articulated urban mobility and planning policies.     

Measuring transport related CO2 emissions induced by online and brick-and-mortar retailing

We develop a method for empirically measuring the difference in transport related carbon footprint between traditional and online retailing (“e-tailing”) from entry point to a geographical area to consumer residence. The method only requires data on the locations of brick-and-mortar stores, online delivery points, and residences of the region’s population, and on the goods transportation networks in the studied region. Such data are readily available in most countries. The method has been evaluated using data from the Dalecarlia region in Sweden, and is shown to be robust to all assumptions made. In our empirical example, the results indicate that the average distance from consumer residence to a brick-and-mortar retailer is 48.54 km in the studied region, while the average distance to an online delivery point is 6.7 km. The results also indicate that e-tailing increases the average distance traveled from the regional entry point to the delivery point from 47.15 km for a brick-and-mortar store to 122.75 km for the online delivery points. However, as professional carriers transport the products in bulk to stores or online delivery points, which is more efficient than consumers’ transporting the products to their residences, the results indicate that consumers switching from traditional to e-tailing on average reduce their transport CO₂ footprints by 84% when buying standard consumer electronics products.     

Evaluating the social cost of cruise ships air emissions in major ports of Greece

Detailed NO_x, SO₂ and PM_2.5 emissions have been estimated for cruise ships in the five busiest Greek ports (i.e. Piraeus, Santorini, Mykonos, Corfu and Katakolo) for year 2013. The emissions were analyzed in terms of gas species, seasonality and activity. The total in-port inventory of cruise shipping accounted to 2742.7 tons: with NO_x being dominant (1887.5 tons), followed by SO₂ and PM_2.5 (760.9 and 94.3 tons respectively). Emissions during hotelling corresponded to 88.5% of total and have significantly outweighed those produced during ships’ maneuvering activities (11.5% of total). Seasonality was found to play a major role, as summer emissions and associated impacts were significantly augmented. The anticipated health impacts of ship emissions can reach to €24.3 million or to €5.3 per passenger proving the necessity of control of the emissions produced by cruise ships in port cities or policy and measures towards a more efficient cruise industry.     

Vicious or virtuous circles? Exploring the vulnerability of drivers to break low urban speed limits

Levels of support for 20 mph limits in Great Britain are consistently high. However, these positive attitudes are not translating into similarly positive behaviour changes in terms of complying with these new speed limits. Recent research from the authors studied the complex relationship between support and compliance, with qualitative findings suggesting that copycat driving could create a ‘vicious circle effect’ that leads to increased levels of non-compliance. However it is also possible that an alternative ‘virtuous circle’ effect may emerge from the high levels of societal support for 20 mph limits pressurising drivers to comply with speed limits. In this work the authors investigated these issues and we report on data and analysis of a large scale survey of drivers and residents undertaken in Great Britain. We explain the origins of vicious and virtuous circles in driver behaviour and study the data from the survey, offering an analysis of attitudes and claimed behaviours that has implications for policy-makers and professionals working with low urban speed limits. We discuss the issues for speed limit enforcement, making reference to the public relations ‘battle’ for public opinion. It is concluded that normative compliance, triggered by community and other campaigning, may be the most realistic mechanism for countering the difficulties of government funding in promoting compliance.     

Mining and correlating traffic events from human sensor observations with official transport data using self-organizing-maps

Cities are complex systems, where related Human activities are increasingly difficult to explore within. In order to understand urban processes and to gain deeper knowledge about cities, the potential of location-based social networks like Twitter could be used a promising example to explore latent relationships of underlying mobility patterns. In this paper, we therefore present an approach using a geographic self-organizing map (Geo-SOM) to uncover and compare previously unseen patterns from social media and authoritative data. The results, which we validated with Live Traffic Disruption (TIMS) feeds from Transport for London, show that the observed geospatial and temporal patterns between special events (r = 0.73), traffic incidents (r = 0.59) and hazard disruptions (r = 0.41) from TIMS, are strongly correlated with traffic-related, georeferenced tweets. Hence, we conclude that tweets can be used as a proxy indicator to detect collective mobility events and may help to provide stakeholders and decision makers with complementary information on complex mobility processes.     

Fit-for-duty test for estimation of drivers’ sleepiness level: Eye movements improve the sleep/wake predictor

Driver sleepiness contributes to a considerable proportion of road accidents, and a fit-for-duty test able to measure a driver’s sleepiness level might improve traffic safety. The aim of this study was to develop a fit-for-duty test based on eye movement measurements and on the sleep/wake predictor model (SWP, which predicts the sleepiness level) and evaluate the ability to predict severe sleepiness during real road driving. Twenty-four drivers participated in an experimental study which took place partly in the laboratory, where the fit-for-duty data were acquired, and partly on the road, where the drivers sleepiness was assessed. A series of four measurements were conducted over a 24-h period during different stages of sleepiness. Two separate analyses were performed; a variance analysis and a feature selection followed by classification analysis. In the first analysis it was found that the SWP and several eye movement features involving anti-saccades, pro-saccades, smooth pursuit, pupillometry and fixation stability varied significantly with different stages of sleep deprivation. In the second analysis, a feature set was determined based on floating forward selection. The correlation coefficient between a linear combination of the acquired features and subjective sleepiness (Karolinska sleepiness scale, KSS) was found to be R = 0.73 and the correct classification rate of drivers who reached high levels of sleepiness (KSS ⩾ 8) in the subsequent driving session was 82.4% (sensitivity = 80.0%, specificity = 84.2% and AUC = 0.86). Future improvements of a fit-for-duty test should focus on how to account for individual differences and situational/contextual factors in the test, and whether it is possible to maintain high sensitive/specificity with a shorter test that can be used in a real-life environment, e.g. on professional drivers.     

Monitoring wildlife crossing structures along highways in Changbai Mountain,China

In China, the construction and monitoring of wildlife crossing structures is uncommon. Mountainous area occupies two-thirds area of China. A lot of tunnels (similar to overpasses in developed countries), bridges, and culverts (similar to underpasses) are constructed along highways. In general, these structures are multifunctional, including wildlife migration. However, studies on monitoring these potential crossing structures are almost vacant. Taking two highways in Changbai Mountain area as case studies, infra-red camera trapping and snow tracking were used to investigate the efficiency of tunnels, bridges and culverts on the highways. A total of 13 medium and large-sized wildlife species crossed highway through tunnels, bridges and culverts. One third of species were Chinese national protective species, and almost all species were present within 500 m from Ring Changbai Mountain Scenic highway used bridges and culverts to cross this highway. The tunnel along the expressway (length = 1000 m) and the bridges along the highway (width > 8 m) have been important passages for ungulates, Eurasian red squirrels (Sciurus vulgaris), yellow throated martens (Martes flavigula) and sables (Martes zibellina). Different species preferred to different types of structures, although most species preferred to bridges and tunnels. We suggest that short fences should be set around the bridges and culverts to guide animals to cross the passages, especially for ungulates. Monitoring programs of uses of crossing structures by wildlife should be conducted for at least 2 months to catch most species activity.     

Development and validation of a questionnaire to assess pedestrian receptivity toward fully autonomous vehicles

This study analyzes pedestrian receptivity toward fully autonomous vehicles (FAVs) by developing and validating a pedestrian receptivity questionnaire for FAVs (PRQF). The questionnaire included sixteen survey items based on attitude, social norms, trust, compatibility, and system effectiveness. 482 Participants from the United States (273 males and 209 females, age range: 18–71 years) responded to an online survey. A principal component analysis determined three subscales describing pedestrians’ receptivity toward FAVs: safety, interaction, and compatibility. This factor structure was verified by a confirmatory factor analysis and reliability of each subscale was confirmed (0.7 < Cronbach’s alpha < 0.9). Regression analyses investigated associations with scenario-based responses to the three PRQF subscale scores. Pedestrians’ intention to cross the road in front of FAVs was significantly predicted by both safety and interaction scores, but not by the compatibility score. Accepting FAVs in the existing traffic system was predicted by all three subscale scores. Demographic influence on the receptivity revealed that males and younger respondents were more receptive toward FAVs. Similarly, those from urban areas and people with higher personal innovativeness showed higher receptivity. Finally, a significant effect of pedestrian behavior (as measured by the pedestrian behavior questionnaire) on receptivity is explored. People who show positive behavior believed that the addition of FAVs will improve overall traffic safety. Those who show higher violation, lapse and aggression scores, were found to feel more confident about crossing the road in front of a FAV. This questionnaire can be a potential research tool for designing and improving FAVs for road-users outside the vehicles.