Identifying contributions of on-road motor vehicles to urban air pollution using travel demand model data

Ambient concentrations of pollutants are correlated with emissions, but the contribution to ambient air quality of on-road mobile sources is not necessarily equal to their contribution to regional emissions. This is true for several reasons such as the distribution of other pollution sources and regional topology, as well as meteorology. In this paper, using a dataset from a travel demand model for the Sacramento metropolitan area for 2005, regional vehicle emissions are disaggregated into hourly, gridded emission inventories, and transportation-related concentrations are estimated using an atmospheric dispersion model. Contributions of on-road motor vehicles to urban air pollution are then identified at a regional scale. The contributions to ambient concentrations are slightly higher than emission fractions that transportation accounts for in the region, reflecting that relative to other major pollution sources, mobile sources tend to have a close proximity to air quality monitors in urban areas. The contribution results indicate that the impact of mobile sources on PM₁₀ is not negligible, and mobile sources have a significant influence on both NO_x and VOC pollution that subsequently results in secondary particulate matter and ozone formation.     

Workplace travel plans: can they be evaluated effectively by experts?

Employers are regularly involved in transport planning and characteristic workplace-oriented tools include: (1) travel plans for building projects, (2) mandatory travel plans, (3) subsidies to employers with an advanced travel plan and (4) best travel plan awards. In all cases, experts judge the level of car use. We argue that decision-makers might benefit from a multiple regression-based benchmark modelling tool that estimates the expected share of the car. In this paper, we estimate the share of car users in the commuting modal split at workplaces. However, since the amount of information available to experts differs, we gradually add information to the model to measure the impact of data availability. Without historic data on modal split, the current share can only be predicted moderately well, i.e. within a 20% range. Besides adding the past, results improve by using homogenous and regional subsamples. Nevertheless, quantitative analyses do not make expert knowledge obsolete.     

Railway transportation and environmental efficiency in China

Railway is one of the most efficient and environmental-friendly ways to transport people and goods. High-speed railway has been developing rapidly and the railway mileage has increased by 21.18% in China during the period of 2006–2011 and thus it is interesting to evaluate whether the railway transportation has reduced the environmental impact of transport in China. In this paper, we first use a non-radial DEA under managerial disposability to measure the environmental efficiency of 30 regions in China; then we propose a panel beta regression with fixed effects to model the impact of railway transportation on environmental efficiency. The results indicate that the environmental efficiency slowly increased during 2006–2011 and it exhibits regional disparities with the eastern area having the highest environmental efficiency and the western area being the lowest one; Moreover, we also find a significant positive impact of railway transportation on higher environmental efficiency.     

Health externalities of ship air pollution at port – Piraeus port case study

This paper is employing the well-known methodology of impact pathway approach to assess the external costs in human health from ship air pollution at port areas. The passenger port of Piraeus, Greece is the scenery of the study. Piraeus port is in the vicinity of the greater Athens metropolitan area where almost half of the country’s population lives. Hence, this port is the central hub of the Greek coastal passenger ship system which connects the islands of the Aegean Sea with land and is characterized by heavy ship traffic. The case study presented in this paper assesses the annual external cost in human health from air emissions produced by all passenger ships and cruise ships calling the port of Piraeus. Health cost from ships at port has been estimated at both local (Athens metropolitan area) and regional level (entire territory of Greece). Results show that higher costs occur at the local level. The dominant pollutants creating this cost are particulate matter (PM_2.5, and PM₁₀). Overall, the results indicate that the health impact of Piraeus’s passenger port emissions is not negligible; however the cost of PM₁₀ is considerably lower than the corresponded cost deriving from the land based industries of the Athens regional area for which comparison has been available.     

A framework to analyze the vulnerability of European road networks due to Sea-Level Rise (SLR) and sea storm surges

This study proposes a framework to explore the concepts of exposure, vulnerability and connectivity in EU road network and to assess the potential transportation infrastructure sensitivities towards Sea-Level Rise (SLR) and storm surges. The magnitude and significance of impacts were determined and knowledge of network robustness was built up based on existing climate data and on future trends. Various spatial databases were integrated and a four-stage transport model was used to explore the likely impacts of network degradation. The pattern of the network was assessed via both node- and link-based measurements, where different road databases, namely TRANS-TOOLS and Tele Atlas/TomTom, were employed in order to analyze the impact of spatial resolution within network connectivity analyses. This general framework developed for European Union, was tested on a specific and articulated case study area; namely, the north-east coastal region of Spain. The research conducted, yielded useful methods for the analysis of network vulnerability, where impacts are more significant in regional accessibility patterns. Accessibility indicators at the regional level changed drastically, with some regions showing up to a 26% decrease. According to the results of network connectivity indicators, the changes in network topology have reduced the number of alternative routes and placed more pressure on the transport system. The implementation of this framework and quantitative assessment methodologies outlined in this paper could be employed to assist policy makers to recognize the opportunities that may arise or diminish the adverse effects.     

Efficiency and equity comparison of cordon- and area-based road pricing schemes using a trip-chain equilibrium model

This paper compares performances of cordon- and area-road pricing regimes on their social welfare benefit and equity impact. The key difference between the two systems is that the cordon charges travellers per crossing whereas the area scheme charges the travellers for an entry permit (e.g. per day). For the area licensing scheme, travellers may decide to pay or not to pay the toll depending on the proportion between their travel costs for the whole trip-chains during a valid period of the area license and the toll level. A static trip-chain equilibrium based model is adopted in the paper to provide a better evaluation of the area-based tolls on trip-chain demands. The paper proposes a modified Gini coefficient taking in account assumptions of revenue re-distribution to measure the spatial equity impact. The model is tested with the case study of the Utsunomiya city in Japan. The results demonstrate a higher level of optimal tolls and social welfare benefits of the area-based schemes compared to those of the cordon-based schemes. Different sizes of the charging boundary have significant influences on the scheme benefits. The tests also show an interesting result on the non-effect of the boundary design (for both charging types) on their equity impacts. However, when comparing between charging regimes it is clear that the area schemes generate more inequitable results.     

Assessing the effect of urban socioeconomic factors and the financial crisis of 2008 on domestic air cargo traffic in Florida

In this paper, we investigate the relationship between the social and economic attributes of metropolitan areas and their corresponding domestic cargo traffic. We considered a period of 14 years (2003–2016) and studied the impact of population demographics, employment, and regional industries on domestic cargo traffic of a sampled set of metropolitan areas in Florida. We considered all-cargo carriers and mixed passenger–cargo carriers. Our results provide empirical insights into factors determining the air cargo traffic in Florida. Both population and age demographics of a region is shown to be influential on cargo traffic. Manufacturing industries are shown to prefer all-cargo carriers to mixed passenger–cargo carriers and their concentration in a metro area results in an increase of cargo traffic. In contrast, service industries generate low demand for air cargo. Our results show that larger airports tend to attract cargo traffic away from smaller airports in their close proximity. We also provide insights into the impact of the financial crisis of 2008 on domestic cargo traffic in the region. We study the recovery trend and the impact of the high fuel jet prices on slowing down this trend.

     

Benchmarking road safety performance by grouping local territories: A study in the Netherlands

The method of benchmarking provides an opportunity to learn from better performing territories to improve the effectiveness and efficiency of activities in a particular field of interest. Such a field of interest could be road safety. Road safety benchmarking can include several indicators, ranging from performance indicated by crash statistics, to indicators that also account for consequences in costs or the underlying state of the road safety system and relevant organisation and processes at actor level. The structure and culture of a territory is identified as a basic context of road safety performance. This is regarded as important information to use in grouping of territories to get more homogenous or equal and comparable conditions to learn from ‘the best in class’.The main aim of this study is to assess the usability of different groupings using the physical structure for benchmarking road safety performance at local territorial level. A traditional grouping of municipalities in the Netherlands was compared with a simple grouping of these municipalities based on their level of urbanisation and an advanced grouping in which more indicators such as differences in demography, growth and road structure were taken into account. As in other studies, urbanisation showed to be the most predominant structural factor for grouping local territories and related to differences in road safety performance. However, if information would be needed for specific target groups, other factors like age and gender distribution or the distribution of the road network can provide valuable additional insight and better homogenous starting points for benchmarking. Especially benchmarking of rural territories may profit from such extra distinctive characteristics.     

The private and social cost efficiency of port hinterland container distribution through a regional logistics system

Increasingly, the debate on freight transport and logistics involves the challenge of sustainable development. Key objectives of sustainable or “green” freight logistics systems are the mitigation of negative environmental and human health effects of distribution operations and the realization of a major modal shift in transport preferences, while at the same time achieving internal generalized cost efficiency and quality of services. Pursuing these goals requires the introduction of a range of measures. These measures call for private and public actors to take up various initiatives and adopt policies. Usually, it is more effective to combine different actions into an integrated package of measures than to introduce single instruments in isolation.This article explores the nexus between sustainability and port hinterland container logistics. In particular, the methodology and results of an empirical analysis based on applications of a network programming tool called the “interport model” are presented and discussed. The model enables an examination of all possible effects on inland container flows and their associated internal and external costs due to public and private initiatives in the field of port hinterland container logistics. The empirical analysis aims to evaluate the impact of a set of simultaneous policy options and operational measures on the competitiveness and sustainability of hinterland multimodal distribution of import and export containers handled at the seaports of the Campania region located in Southern Italy. The loading units can transit through the dry port facilities (the so called “interports”) located in the same region and/or through extra regional railway terminals, before reaching their ultimate inland destinations or the seaports. The integrated package of measures simulated by means of the model includes: (i) infrastructure policy, (ii) improvements of rail services, (iii) regulatory changes in terms of customs authorizations and procedures, (iv) removal of technical and legal barriers to fair and non-discriminatory competition in the market of rail traction between regional seaports and interports, (v) new business models integrating container logistics operations between seaports and interports, and (vi) social marginal cost charging of transport operations. Once this package of instruments is introduced, higher private and social cost efficiency of port hinterland container distribution through the investigated regional logistics system can be achieved. For instance, it has been estimated an annual saving of the order of about 12,660 tonnes of CO₂ equivalent emissions from transport corresponding to an external cost reduction of 0.27 million euros from the observed real life situation, whereas the estimated saving in terms of air pollution (CO, NO_x, PM, SO₂, VOC) from transport is approximately 220 tonnes per year corresponding to an external benefit of 1.31 million euros.The most immediate priority appears to be the customs and intermodal logistics integration of seaports and interports by means of full implementation of the “extended gateway” concept as a way to increase the rail share of modal split and improve the overall cost efficiency of the system. In addition, the simultaneous introduction of a social marginal cost charging policy can contribute to make the regional interports a viable solution to expand the hinterland reach of the regional seaport cluster.     

Geographical unit based analysis in the context of transportation safety planning

A wide array of spatial units has been explored in macro-level modeling. With the advancement of Geographic Information System (GIS) analysts are able to analyze crashes for various geographical units. However, a clear guideline on which geographic entity should be chosen is not present. Macro level safety analysis is at the core of transportation safety planning (TSP) which in turn is a key in many aspects of policy and decision making of safety investments. The preference of spatial unit can vary with the dependent variable of the model. Or, for a specific dependent variable, models may be invariant to multiple spatial units by producing a similar goodness-of-fits. In this study three different crash models were investigated for traffic analysis zones (TAZs), block groups (BGs) and census tracts (CTs) of two counties in Florida. The models were developed for the total crashes, severe crashes and pedestrian crashes in this region. The primary objective of the study was to explore and investigate the effect of zonal variation (scale and zoning) on these specific types of crash models. These models were developed based on various roadway characteristics and census variables (e.g., land use, socio-economic, etc.).It was found that the significance of explanatory variables is not consistent among models based on different zoning systems. Although the difference in variable significance across geographic units was found, the results also show that the sign of the coefficients are reasonable and explainable in all models.Key findings of this study are, first, signs of coefficients are consistent if these variables are significant in models with same response variables, even if geographic units are different. Second, the number of significant variables is affected by response variables and also geographic units.Admittedly, TAZs are now the only traffic related zone system, thus TAZs are being widely used by transportation planners and frequently utilized in research related to macroscopic crash analysis. Nevertheless, considering that TAZs are not delineated for traffic crash analysis but they were designed for the long range transportation plans, TAZs might not be the optimal zone system for traffic crash modeling at the macroscopic level. Therefore, it recommended that other zone systems be explored for crash analysis as well.     

A choice model of airline passengers’ spending behaviour in the airport terminal

This study examines the influence of passengers’ travel-related factors, their intention to shop and the impact of socio-economic factors on their consumption behaviours while at the airport terminal. Three categories of consumption model – shopping, dining and airport entertainment – are developed to analyse different consumption behaviours. The results show that free time is the main factor that influences passengers to choose entertainment while waiting at the terminal, and the use of airline lounges has a negative influence on the extent of engagement in all three types of passenger consumption behaviour, especially dining. Furthermore, passengers’ dining expenditure has a positive effect on the extent of engagement in entertainment, but a negative influence on the extent of engagement in airport shopping. Passengers’ preferences of airport shopping area after they have cleared security is positively associated with the extent of engagement in both shopping and entertainment but negatively associated with the extent of engagement in dining activities.     

Explore the relationship between online shopping and shopping trips: An analysis with the 2009 NHTS data

The rapid growth of ecommerce brings great changes to the transportation system. However, most existing studies focus on the impact of ecommerce on freight system. Its impact on personal trips is relatively less studied. It is reasonable to argue that online shopping reduces the need of shopping trips by making goods accessible via door-to-door deliveries. On the other hand, online shopping may also create more shopping trips as online shoppers travel to stores to experience, compare or pick up the goods. Understanding the connections between online shopping and shopping trips is critical for transportation planners to prepare for changes that information technology will continue to bring to this nation in the future. Using the 2009 National Household Travel Survey (NHTS) data and a structural equation model (SEM), this paper disentangles the bidirectional connections between online shopping and shopping trips. Results show that online shopping encourages shopping trips while shopping trips tend to suppress the online shopping propensity. Besides, both online shopping and shopping trips are influenced by exogenous factors such as shoppers’ demographic features, regional specific factors and household attributes. A closer examination at the state level further confirms model validity while disclosing spatial variation in their relationship.     

Exploring transportation equity: Development and application of a transportation justice framework

Recent efforts to emphasize social equity in transportation are emerging as local, regional and national governments have set initiatives to identify, existing and potential, disproportionate impacts to low-income and minority populations, also referred to as transportation justice (TJ). Currently, there are suggested methods for identifying transportation justice areas; however, there is no streamlined method instituted across transportation agencies. Each jurisdiction identifies transportation justice (or environmental justice) areas based on their own methodology, typically based on either average regional thresholds, graduated thresholds, or a more unique in-house index methodology. This research explores and evaluates existing methods and develops a rigorous and comprehensive method called the Transportation Justice Threshold Index Framework (TJTIF) using Geographic Information Systems (GIS), as well as factors based on demographics, socio-economics, and transportation/land use. The framework is applied to a case study region in Pennsylvania reflective of the Marcellus Shale impact area, highlighting Sullivan County, PA. The methodology and the case study application serve as an example for how transportation agencies throughout the country can promote social sustainability and enhance transportation equity.     

Parents’ perspectives on using autonomous vehicles to enhance children’s mobility

Prior research has estimated the impact of an autonomous vehicle (AV) environment on the mobility of underserved populations such as adult non-drivers. What is currently unknown is the impact of AVs on enhancing the mobility of children who are also mobility disadvantaged, as child passengers are likely part of AV ridership scenarios in the perceivable future. To address this question, our study collected perceived benefits and concerns of AVs from a US convenience sample of parents whose children relied on them for mobility. We found that parents’ intentions to travel in AV and their technology readiness as well as parent (sex, residence area) and child (age, restraint system) demographic profiles were important determinants of potential AV acceptance and impact. In addition, two groups of potential AV users emerged from the data: the curious and the practical. This study addresses a gap in the literature by assessing parents’ perspectives on using AVs to transport children. The results have great potentials to guide the design of mobility features, safety evaluations, and implementation policies, as a decline in public interest in AVs has been recently documented.     

Effects of shadow evacuation on megaregion evacuations

Transportation systems serve important roles during emergencies, in particular for evacuations. However, efficient travel during these life-and-death scenarios can be adversely impacted by external conditions, such as unnecessary and unneeded travel. This research sought to enhance the understanding of the effects of these conditions by analyzing shadow evacuations, and their impact on regional traffic operations in megaregions, more broadly. The research was based on simulations of a range of hurricane evacuation threat scenarios in the Gulf of Mexico building upon prior study using TRANSIMS. These assessments are also targeted at what many assume could be worst case evacuation conditions and pushing the limits of current simulation modeling capability. Among the broader findings of this work was that shadow evacuation participation rates did not significantly impact the evacuation clearance times within mandatory evacuation areas of the megaregion as long as demand could be temporarily spread out. This finding does not, however, suggest that the shadow evacuations have no impact on evacuation processes. High rates of shadow evacuees can cause significant congestion if they are not able to exit critical routes before mandatory evacuees reach areas further away from the coast.     

Integrated data-driven modeling to estimate PM2.5 pollution from heavy-duty truck transportation activity over metropolitan area

Based on the national emission inventory data from different countries, heavy-duty trucks are the highest on-road PM_2.5 emitters and their representation is estimated disproportionately using current modeling methods. This study expands current understanding of the impact of heavy-duty truck movement on the overall PM_2.5 pollution in urban areas through an integrated data-driven modeling methodology that could more closely represent the truck transportation activities. A detailed integrated modeling methodology is presented in the paper to estimate urban truck related PM_2.5 pollution by using a robust spatial regression-based truck activity model, the mobile source emission and Gaussian dispersion models. In this research, finely resolved spatial–temporal emissions were calculated using bottom-up approach, where hourly truck activity and detailed truck-class specific emissions rates are used as inputs. To validate the proposed methodology, the Cincinnati urban area was selected as a case study site and the proposed truck model was used with U.S. EPA’s MOVES and AERMOD models. The heavy-duty truck released PM_2.5 pollution is estimated using observed concentrations at the urban air quality monitoring stations. The monthly air quality trend estimated using our methodology matches very well with the observed trend at two different continuous monitoring stations with Spearman’s rank correlation coefficient of 0.885. Based on emission model results, it is found that 71 percent of the urban mobile-source PM_2.5 emissions are caused by trucks and also 21 percent of the urban overall ambient PM_2.5 concentrations can be attributed to trucks in Cincinnati urban area.     

Integrating a traffic router and microsimulator into a land use and travel demand model

Abstract

This paper describes one of the first known attempts at integrating a dynamic and disaggregated land-use model with a traffic microsimulator and compares its predictions of land use to those from an integration of the same land-use model with a more traditional four-step travel demand model. For our study area of Chittenden County, Vermont, we used a 40-year simulation beginning in 1990. Predicted differences in residential units between models for 2030 broken down by town correlated significantly with predicted differences in accessibility. The two towns with the greatest predicted differences in land use and accessibility are also the towns that currently have the most severe traffic bottlenecks and poorest route redundancy. Our results suggest that this particular integration of a microsimulator with a disaggregated land-use model is technically feasible, but that in the context of an isolated, small metropolitan area, the differences in predicted land use are small.     

Integrating mesoscopic dynamic traffic assignment with agent-based travel behavior models for cumulative land development impact analysis

A number of approaches have been developed to evaluate the impact of land development on transportation infrastructure. While traditional approaches are either limited to static modeling of traffic performance or lack a strong travel behavior foundation, today’s advanced computational technology makes it feasible to model an individual traveler’s response to land development. This study integrates dynamic traffic assignment (DTA) with a positive agent-based microsimulation travel behavior model for cumulative land development impact studies. The integrated model not only enhances the behavioral implementation of DTA, but also captures traffic dynamics. It provides an advanced yet practical approach to understanding the impact of a single or series of land development projects on an individual driver’s behavior, as well as the aggregated impacts on the demand pattern and time-dependent traffic conditions. A simulation-based optimization (SBO) approach is proposed for the calibration of the modeling system. The SBO calibration approach enhances the transferability of this integrated model to other study areas. Using a case study that focuses on the cumulative land development impact along a congested corridor in Maryland, various regional and local travel behavior changes are discussed to show the capability of this tool for behavior side estimations and the corresponding traffic impacts.     

Quantifying the climate impact of emissions from land-based transport in Germany

Although climate change is a global problem, specific mitigation measures are frequently applied on regional or national scales only. This is the case in particular for measures to reduce the emissions of land-based transport, which is largely characterized by regional or national systems with independent infrastructure, organization, and regulation. The climate perturbations caused by regional transport emissions are small compared to those resulting from global emissions. Consequently, they can be smaller than the detection limits in global three-dimensional chemistry-climate model simulations, hampering the evaluation of the climate benefit of mitigation strategies. Hence, we developed a new approach to solve this problem. The approach is based on a combination of a detailed three-dimensional global chemistry-climate model system, aerosol-climate response functions, and a zero-dimensional climate response model. For demonstration purposes, the approach was applied to results from a transport and emission modeling suite, which was designed to quantify the present-day and possible future transport activities in Germany and the resulting emissions. The results show that, in a baseline scenario, German transport emissions result in an increase in global mean surface temperature of the order of 0.01 K during the 21st century. This effect is dominated by the CO₂ emissions, in contrast to the impact of global transport emissions, where non-CO₂ species make a larger relative contribution to transport-induced climate change than in the case of German emissions. Our new approach is ready for operational use to evaluate the climate benefit of mitigation strategies to reduce the impact of transport emissions.