Short-term prediction of border crossing time and traffic volume for commercial trucks: A case study for the Ambassador Bridge

Short-term forecasting of traffic characteristics, such as traffic flow, speed, travel time, and queue length, has gained considerable attention from transportation researchers and practitioners over past three decades. While past studies primarily focused on traffic characteristics on freeways or urban arterials this study places particular emphasis on modeling the crossing time over one of the busiest US–Canada bridges, the Ambassador Bridge. Using a month-long volume data from Remote Traffic Microwave Sensors and a yearlong Global Positioning System data for crossing time two sets of ANN models are designed, trained, and validated to perform short-term predictions of (1) the volume of trucks crossing the Ambassador Bridge and (2) the time it takes for the trucks to cross the bridge from one side to the other. The prediction of crossing time is contingent on truck volume on the bridge and therefore separate ANN models were trained to predict the volume. A multilayer feedforward neural network with backpropagation approach was used to train the ANN models. Predicted crossing times from the ANNs have a high correlation with the observed values. Evaluation indicators further confirmed the high forecasting capability of the trained ANN models. The ANN models from this study could be used for short-term forecasting of crossing time that would support operations of ITS technologies.     

Optimal distance between two branches of uncontrolled split intersection

This work examines the possibility of splitting an uncontrolled “X” intersection into two adjacent uncontrolled “T” intersections. This splitting aims to improve both the movement and safety of traffic. The problem addressed in this work is how to determine the optimal distance between the two adjacent T intersections. The best type of split, based on previous studies, is the one in which vehicles approach first the right turn and then the left turn in both directions of travel. The main conclusions drawn in this work refer to this preferred type. The optimal distance is arrived at on the basis of an objective function of minimal delay subject to blocking queues, passing (another vehicle) probabilities, budget limitations and safety threshold. The input data consist of 12 traffic volumes associated with all the traffic movements of an X intersection. The main findings are: (a) under a medium level of traffic volume, the blocking queue lengths are of the order of hundreds of meters and are very sensitive to the increase of volume toward and beyond saturation flow; (b) the passing probability function along the road segment between the two adjacent T intersections increases with the length of the segment and stabilizes at a length of a few hundred meters; (c) there is a relationship between accident frequency (accident rate and density) and the distance between the split intersections. An example of this relationship is introduced; and (d) the optimal distance between the two adjacent T intersections is found not only theoretically, but also practically for possible implementations.     

Use of sequential learning for short-term traffic flow forecasting

Accurate short-term traffic flow forecasting has become a crucial step in the overall goal of better road network management. Previous research [H. Kirby, M. Dougherty, S. Watson, Should we use neural networks or statistical models for short term motorway traffic forecasting, International Journal of Forecasting 13 (1997) 43–50.] has demonstrated that a straightforward application of neural networks can be used to forecast traffic flows along a motorway link. The objective of this paper is to report on the application and performance of an alternative neural computing algorithm which involves ‘sequential or dynamic learning’ of the traffic flow process. Our initial work [H. Chen, S. Clark, M.S. Dougherty, S.M. Grant-Muller, Investigation of network performance prediction, Report on Dynamic Neural Network and Performance Indicator development, Institute for Transport Studies, University of Leeds Technical Note 418, 1998 (unpublished)] was based on simulated data (generated using a Hermite polynomial with random noise) that had a profile similar to that of traffic flows in real data. This indicated the potential suitability of dynamic neural networks with traffic flow data. Using the Kalman filter type network an initial application with M25 motorway flow data suggested that a percentage absolute error (PAE) of approximately 9.5% could be achieved for a network with five hidden units (compared with 11% for the static neural network model). Three different neural networks were trained with all the data (containing an unknown number of incidents) and secondly using data wholly obtained around incidents. Results showed that from the three different models, the ‘simple dynamic model’ with the first five units fixed (and subsequent hidden units distributed amongst these) had the best forecasting performance. Comparisons were also made of the networks’ performance on data obtained around incidents. More detailed analysis of how the performance of the three networks changed through a single day (including an incident) showed that the simple dynamic model again outperformed the other two networks in all time periods. The use of ‘piecewise’ models (i.e. where a different model is selected according to traffic flow conditions) for data obtained around incidents highlighted good performance again by the simple dynamic network. This outperformed the standard Kalman filter neural network for a medium-sized network and is our overall recommendation for any future application.     

Estimation of saturation flow at signalised intersections of developing cities: a micro-simulation modelling approach

Traffic characteristics and operations at the signalised intersections of developing cities are significantly different from those at the similar intersections of cities in developed countries. Considering this, a new microscopic simulation technique, where a co-ordinate approach to modelling vehicle location is adopted, has been used for modelling the traffic operations at signalised intersections of developing cities. The model has been calibrated and validated on the basis of data collected from Dhaka, the capital of Bangladesh. It has been found that the concept of passenger car unit (PCU), which is widely used as a signal design parameter, is not applicable in case of mixed traffic comprising of both motorised and non-motorised vehicles. Therefore, using the developed simulation model the saturation flows at signalised intersections are investigated in an aggregate form of vehicles per hour. It has also been found that saturation flows in terms of aggregate vehicles are very much dependent on the approach width, turning proportion and composition of the traffic mix. Using the simulation results, an equation has also been regressed in order to be able to estimate the saturation flow from the influencing variables like road width, turning proportion, percentage of heavy and non-motorised vehicles.     

Comparison of parametric and nonparametric models for traffic flow forecasting

Single point short-term traffic flow forecasting will play a key role in supporting demand forecasts needed by operational network models. Seasonal autoregressive integrated moving average (ARIMA), a classic parametric modeling approach to time series, and nonparametric regression models have been proposed as well suited for application to single point short-term traffic flow forecasting. Past research has shown seasonal ARIMA models to deliver results that are statistically superior to basic implementations of nonparametric regression. However, the advantages associated with a data-driven nonparametric forecasting approach motivate further investigation of refined nonparametric forecasting methods. Following this motivation, this research effort seeks to examine the theoretical foundation of nonparametric regression and to answer the question of whether nonparametric regression based on heuristically improved forecast generation methods approach the single interval traffic flow prediction performance of seasonal ARIMA models.     

An intersection turning movement estimation procedure based on path flow estimator

Estimation of intersection turning movements is one of the key inputs required for a variety of transportation analysis, including intersection geometric design, signal timing design, traffic impact assessment, and transportation planning. Conventional approaches that use manual techniques for estimation of turning movements are insensitive to congestion. The drawbacks of the manual techniques can be amended by integrating a network traffic model with a computation procedure capable of estimating turning movements from a set of link traffic counts and intersection turning movement counts. This study proposes using the path flow estimator, originally used to estimate path flows (hence origin–destination flows), to derive not only complete link flows, but also turning movements for the whole road network given some counts at selected roads and intersections. Two case studies using actual traffic counts are used to demonstrate the proposed intersection turning movement estimation procedure. Copyright © 2010 John Wiley & Sons, Ltd.     

A reverse causal-effect modeling approach for signal control of an oversaturated intersection

A novel approach is presented in which signalized intersections are treated as normal highway bottlenecks for improved computational efficiency. It is unique in two ways. First, it treats the signalized intersections as common freeway bottlenecks by a reversed cause and effect modeling approach. Both traffic arrivals and departures are modeled by smooth continuous functions of time as if there were no interruptions to traffic flows from signals. The use of smooth continuous functions for departure curves instead of commonly used step functions makes it easy to apply differential calculus in optimization and future extension to a system of intersections. Second, a dynamic linear programming (LP) model is then developed to maximize the total vehicular output from the intersection during the entire period of congestion subject to prevailing capacity and other operational constraints. The continuous optimal departure flow rate (the effect) is then converted to signal timing parameters (the cause) that can be readily implemented. Two numerical examples are presented to demonstrate the properties of the proposed algorithm and examine its performance.     

An empirical analysis on the arterial fundamental diagram

For uninterrupted traffic flow, it is well-known that the fundamental diagram (FD) describes the relationship between traffic flow and density under steady state. For interrupted traffic flow on a signalized road, it has been recognized that the arterial fundamental diagram (AFD) is significantly affected by signal operations. But little research up to date has discussed in detail how signal operations impact the AFD. In this paper, based upon empirical observations from high-resolution event-based traffic signal data collected from a major arterial in the Twin Cities area, we study the impacts of g/C ratio, signal coordination, and turning movements on the cycle-based AFD, which describes the relationship between traffic flow and occupancy in a signal cycle. By microscopically investigating individual vehicle trajectories from event-based data, we demonstrate that not only g/C ratio constrains the capacity of a signalized approach, poor signal coordination and turning movements from upstream intersections also have significant impact on the capacity. We show that an arterial link may not be congested even with high occupancy values. Such high values could result from queue build-up during red light that occupies the detector, i.e. the Queue-Over-Detector (QOD) phenomenon discussed in this paper. More importantly, by removing the impact of QOD, a stable form of AFD is revealed, and one can use that to identify three different regimes including under-saturation, saturation, and over-saturation with queue spillovers. We believe the stable form of AFD is of great importance for traffic signal control because of its ability to identify traffic states on a signal link.     

Hybrid artificial neural network and locally weighted regression models for lane-based short-term urban traffic flow forecasting

ABSTRACT

In recent years, there has been considerable research interest in short-term traffic flow forecasting. However, forecasting models offering a high accuracy at a fine temporal resolution (e.g. 1 or 5?min) and lane level are still rare. In this study, a combination of genetic algorithm, neural network and locally weighted regression is used to achieve optimal prediction under various input and traffic settings. The genetically optimized artificial neural network (GA-ANN) and locally weighted regression (GA-LWR) models are developed and tested, with the former forecasting traffic flow every 5-min within a 30-min period and the latter for forecasting traffic flow of a particular 5-min period of each for four lanes of an urban arterial road in Beijing, China. In particular, for morning peak and off-peak traffic flow prediction, the GA-ANN 5-min traffic flow model results in average errors of 3–5% and most 95th percentile errors of 7–14% for each of the four lanes; for the peak and off-peak time traffic flow predictions, the GA-LWR 5-min traffic flow model results in average errors of 2–4% and most 95th percentile errors are lower than 10% for each of the four lanes. When compared to previous models that usually offer average errors greater than 6–15%, such empirical findings should be of interest to and instrumental for transportation authorities to incorporate in their city- or state-wide Advanced Traveller Information Systems (ATIS).     

A virtual vehicle probe model for time-dependent travel time estimation on signalized arterials

Estimation of time-dependent arterial travel time is a challenging task because of the interrupted nature of urban traffic flows. Many research efforts have been devoted to this topic, but their successes are limited and most of them can only be used for offline purposes due to the limited availability of traffic data from signalized intersections. In this paper, we describe a real-time arterial data collection and archival system developed at the University of Minnesota, followed by an innovative algorithm for time-dependent arterial travel time estimation using the archived traffic data. The data collection system simultaneously collects high-resolution “event-based” traffic data including every vehicle actuations over loop detector and every signal phase changes from multiple intersections. Using the “event-based” data, we estimate time-dependent travel time along an arterial by tracing a virtual probe vehicle. At each time step, the virtual probe has three possible maneuvers: acceleration, deceleration and no-speed-change. The maneuver decision is determined by its own status and surrounding traffic conditions, which can be estimated based on the availability of traffic data at intersections. An interesting property of the proposed model is that travel time estimation errors can be self-corrected, because the trajectory differences between a virtual probe vehicle and a real one can be reduced when both vehicles meet a red signal phase and/or a vehicle queue. Field studies at a 11-intersection arterial corridor along France Avenue in Minneapolis, MN, demonstrate that the proposed model can generate accurate time-dependent travel times under various traffic conditions.     

Statistical methods for detecting nonlinearity and non-stationarity in univariate short-term time-series of traffic volume

Short-term traffic volume data are characterized by rapid and intense fluctuations with frequent shifts to congestion. Currently, research in short-term traffic forecasting deals with these phenomena either by smoothing them or by accounting for them by nonlinear models. But, these approaches lead to inefficient predictions particularly when the data exhibit intense oscillations or frequent shifts to boundary conditions (congestion). This paper offers a set of tools and methods to assess on underlying statistical properties of short-term traffic volume data, a topic that has largely been overlooked in traffic forecasting literature. Results indicate that the statistical characteristics of traffic volume can be identified from prevailing traffic conditions; for example, volume data exhibit frequent shifts from deterministic to stochastic structures as well as transitions between cyclic and strongly nonlinear behaviors. These findings could be valuable in the implementation of a variable prediction strategy according to the statistical characteristics of the prevailing traffic volume states.     

A new class of dynamic methods for the identification of origin-destination flows

A new systems dynamics approach for the identification of origin-destination (O-D) flows in a traffic system is presented. It is the basic idea of this approach that traffic flow through a facility is treated as a dynamic process in which the sequences of short-time exit flow counts depend by causal relationships upon the time-variable sequences of entrance flow volumes. In that way enough information can be obtained from the counts at the entrances and the exits to obtain unique and bias-free estimates for the unknown O-D flows without further a priori information. Four different methods were developed: an ordinary least squares estimator involving cross-correlation matrices, a constrained optimization method, a simple recursive estimation formula and estimation by Kalman filtering. The methods need only moderate computational effort and are particularly useful for tracking time-variable O-D patterns for on-line identification and control purposes. An analysis of the accuracy of the estimates and a discussion of the convergence properties of the methods are given. Finally, a comparison with some conventional static estimation procedures is carried out using synthetic as well as real data from several intersections. These tests demonstrated that the presented dynamic methods are highly superior to conventional techniques and produce more accurate results.     

On development of arterial fundamental diagrams based on surrogate density measures from adaptive traffic control systems utilizing stop-line detection

A promising framework for understanding flow-density relationship in traffic flow theory is the Fundamental Diagram, originally developed for uninterrupted traffic flow facilities. The concept has been extended to the Arterial Fundamental Diagram (AFD), which has shown that the same relationship holds on arterial streets. However, constructing an AFD is subject to considerable variability in the measured quantities, due to the highly cyclical nature of signalized intersections. In most cases, these diagrams are based on the data from upstream detectors, located away from traffic signals. Recent scientific literature has shown a value of using stop-line detection data to develop AFDs, opening a plethora of opportunities to further investigate traffic dynamics utilizing the data from adaptive traffic control systems (ATCSs). This can, however, be problematic for two major reasons. First, the data may come from detectors unfit to provide good-quality inputs to develop an AFD. Second, such ATCSs may use their own surrogate measures of density and traffic flow, primarily developed for the purpose of controlling traffic, which may be inappropriate for developing fundamental relationships. This study aims to address these issues by investigating appropriateness of using Degree of Saturation (DS), a density-like measure from Sydney Coordinated Adaptive Traffic System (SCATS), to develop an AFD. Empirical SCATS data shows an interesting pattern of the AFD, which cannot be explained by the data itself. Hence, we derive a new analytical model of DS based on the high-resolution signal and detection data, which reveals parameters that drive its behavior. Additionally, we develop the Cyclical Vehicle Arrival and Discharge Model to simulate SCATS-like operations and derive causal relationships between traffic flow variables and density-like performance measures in a controlled environment. The findings show that DS does not have to be a poor estimator of traffic conditions, but when it is combined with SCATS-measured traffic flows it gives a false representation of near-capacity and over-saturated conditions.     

Vehicle headway modeling and its inferences in macroscopic/microscopic traffic flow theory: A survey

Vehicle headway distribution models are widely used in traffic engineering fields, since they reflect the fundamental uncertainty in drivers' car-following maneuvers and meanwhile provide a concise way to describe the stochastic feature of traffic flows. This paper presents a systematic review of vehicle headway distribution studies in the last few decades. Since it is impossible to enumerate the merits and drawbacks of all of existing distribution models, we emphasize four advances of headway distribution modeling in this paper. First, we highlight the chronicle of key assumptions on the existing distribution models and explain why this evolution occurs. Second, we show that departure headways measured for interrupted flows on urban streets and headways measured for uninterrupted flows on freeways have common features and can be simulated by a unified microscopic car-following model. The interesting finding helps gather two kinds of headway distribution models under one umbrella. Third, we review different approaches that aim to link microscopic car-following models and mesoscopic vehicle headway distribution models. Fourth, we show that both the point scattering on the density-flow plot and the shape of traffic flow breakdown curve implicitly depend on the vehicular headway distribution. These findings reveal pervasive connections between macroscopic traffic flow models and mesoscopic headway distribution. All these new insights bring new vigor into vehicle headway studies and open research frontiers in this field.     

Integrated model for traffic flow forecasting under rainy conditions

Inclement weather, such as heavy rain, significantly affects road traffic flow operation, which may cause severe congestion in road networks in cities. This study investigates the effect of inclement weather, such as rain events, on traffic flow and proposes an integrated model for traffic flow parameter forecasting during such events. First, an analysis of historical observation data indicates that the forecasting error of traffic flow volume has a significant linear correlation with mean precipitation, and thus, forecasting accuracy can be considerably improved by applying this linear correlation to correct forecasting values. An integrated online precipitation‐correction model was proposed for traffic flow volume forecasting based on these findings. We preprocessed precipitation data transformation and used outlier detection techniques to improve the efficiency of the model. Finally, an integrated forecasting model was designed through data fusion methods based on the four basic forecasting models and the proposed online precipitation‐correction model. Results of the model validation with the field data set show that the designed model is better than the other models in terms of overall accuracy throughout the day and under precipitation. However, the designed model is not always ideal under heavy rain conditions. Copyright © 2016 John Wiley & Sons, Ltd.     

A technique for the investigation of scheme benefits in large-scale transport networks

Existing methods of evaluating large-scale transport networks involve the use of mathematical models of traffic flow which are generally both large and complex. However, the time and cost involved in the use of these models normally restricts their use for the detailed forecasting of traffic flows and costs to the assessment of a relatively small number of alternative patterns of overall investment. In order to evaluate the individual projects and groups of projects which go to make up an overall investment plan, it is, therefore, usually necessary to make simplifying assumptions about the influence of any one project on the overall traffic pattern, so as to isolate it from the influence of neighbouring projects. These assumptions generally result in the loss of a certain amount of the detail normally available from a standard model, and the task of assessing the relative value of different projects and the amount of interaction between them is made more difficult.This paper describes a new technique, designed to permit the evaluation of individual projects whilst still retaining the level of detail available from a full-scale mathematical model. The aim has been to produce a cheap and easy-to-use technique, capable of producing substantially the same results as a standard model. The technique uses newly developed computer algorithms which short-cut the full-scale model by forecasting the changes in an existing travel pattern resulting from the influence of a particular project. Initial tests suggest that approaching the problem in this way can save up to 70% of the computing time and costs involved in the use of a standard model for the evaluation of individual projects.The technique as described here is envisaged as a tool for aiding strategic investment decisions. It can, however, provide data for more detailed investigations, and could, with modifications, carry out these investigations on smaller problems than those for which it was originally designed.Crown copyright reserved, 1973     

A network flow model for lane-based evacuation routing

Most traffic delays in regional evacuations occur at intersections. Lane-based routing is one strategy for reducing these delays. This paper presents a network flow model for identifying optimal lane-based evacuation routing plans in a complex road network. The model is an integer extension of the minimum-cost flow problem. It can be used to generate routing plans that trade total vehicle travel-distance against merging, while preventing traffic crossing-conflicts at intersections. A mixed-integer programming solver is used to derive optimal routing plans for a sample network. Manual capacity analysis and microscopic traffic simulation are used to compare the relative efficiency of the plans. An application is presented for Salt Lake City, Utah.     

A traffic noise model for road intersections in the city of Cartagena de Indias,Colombia

Road traffic noise models are fundamental tools for designing and implementing appropriate prevention plans to minimize and control noise levels in urban areas. The objective of this study is to develop a traffic noise model to simulate the average equivalent sound pressure level at road intersections based on traffic flow and site characteristics, in the city of Cartagena de Indias (Cartagena), Colombia. Motorcycles are included as an additional vehicle category since they represent more than 30% of the total traffic flow and a distinctive source of noise that needs to be characterized. Noise measurements are collected using a sound level meter Type II. The data analysis leads to the development of noise maps and a general mathematical model for the city of Cartagena, Colombia, which correlates the sound levels as a function of vehicle flow within road intersections. The highest noise levels were 79.7 dB(A) for the road intersection María Auxiliadora during the week (business days) and 77.7 dB(A) for the road intersection India Catalina during weekends (non-business days). Although traffic and noise are naturally related, the intersections with higher vehicle flow did not have the highest noise levels. The roadway noise for these intersections in the city of Cartagena exceeds current limit standards. The roadway noise model is able to satisfactorily predict noise emissions for road intersections in the city of Cartagena, Colombia.     

非灯控交叉口交通安全状况评价

非灯控交叉口是交通流中的节点,对非灯控交叉口的交通安全状况进行评价具有导向性意义。文章针对交叉口管控存在的问题,提出了交通安全状况评价原则和主要方法,阐述了非灯控交叉口交通安全的影响因素,并通过对沈阳市刘家窑十字交叉口进行交通安全状况评价,提出了具体的交叉口交通安全改善措施,以提高非灯控交叉口的交通安全性。     

Short‐term travel time forecasts for transport information system in hong kong

In this paper, a case study is carried out in Hong Kong for demonstration of the Transport Information System (TIS) prototype. A traffic flow simulator (TFS) is presented to forecast the short‐term travel times that can be served as a predicted travel time database for the TIS in Hong Kong. In the TFS, a stochastic deviation coefficient is incorporated to simulate the minute‐by‐minute fluctuation of traffic flows within the peak hour period. The purposes of the case study are: 1) to show the applicability of the TFS for larger‐scale road network; and 2) to illustrate the short‐term forecasting of path travel times in practice. The results of the case study show that the TFS can be applied to real network effectively. The predicted travel times are compared with the observed travel times on the selected paths for an OD pair. The results show that the observed path travel times fall in the 90% confidence interval of the predicted path travel times.