Utilization patterns of park and ride facilities among Kuala Lumpur commuters

A parking utilization survey was undertaken with the main objective of analyzing and comparing the daily workday utilization patterns of two main park and ride stations within the Kuala Lumpur conurbation. This study also aimed to gauge the level of usage of the park and ride facilities. The findings showed that the overall utilization pattern of the facilities was very high with a utilization rate of between 80 and 95%. The stations, however, recorded a contrasting accumulation pattern. The study further revealed that most of the rail-based suburban park and ride users were long term parkers. The results of this study are comparable to results of similar studies in Seoul, Calgary, Tyne and Wear and others. Since parking availability is an important factor that has influence on the behavior of a park and ride user, more accurate information relating to the supply and demand of the park and ride facility will assist in planning new transport infrastructure.

Using AHP to measure the perception gap between current and potential users of bus services

Abstract

This study develops a multicriteria evaluation of user perception towards bus transit services and measures the gap in the perceptions held by current and potential users. A review of the transport quality literature indicates that both preference and satisfaction measures have been implemented to provide a comprehensive perception-based evaluation of bus quality. Although attempts have been made to evaluate user perception through a separate analysis of each (preference and/or satisfaction), the application of multicriteria quality measures are limited. A multicriteria quality measure not only offers more than just information on the daily experience of users but also knowledge of the internal process of quality evaluation (drivers/barriers). The multicriteria measure utilises the data of 512 questionnaires, whereby user perceptions were expressed through judgments of importance and satisfaction based on a set of 29 quality indicators classified into six attributes. Firstly, the study develops analytical hierarchy process (AHP) models to measure user preference. Secondly, a weighted perception index (WPI) of both preference and satisfaction is developed through a multicriteria model. Finally, multivariate analysis of variance (MANOVA) is conducted to identify the level of variation in the perception of both current and potential users towards bus service quality. The results show that although both current and potential users place a higher importance towards the same indicators, they do not share the same pattern of preferences (values and/or order). In addition, the study found that the interaction between preferences and satisfaction generated new patterns of subjective evaluation, and that these patterns vary significantly by user category.     

Development a new power management strategy for power split hybrid electric vehicles

Reduction of greenhouse gas emission and fuel consumption as one of the main goals of automotive industry leading to the development hybrid vehicles. The objective of this paper is to investigate the energy management system and control strategies effect on fuel consumption, air pollution and performance of hybrid vehicles in various driving cycles. In order to simulate the hybrid vehicle, the combined feedback–feedforward architecture of the power-split hybrid electric vehicle based on Toyota Prius configuration is modeled, together with necessary dynamic features of subsystem or components in ADVISOR. Multi input fuzzy logic controller developed for energy management controller to improve the fuel economy of a power-split hybrid electric vehicle with contrast to conventional Toyota Prius Hybrid rule-based controller. Then, effects of battery’s initial state of charge, driving cycles and road grade investigated on hybrid vehicle performance to evaluate fuel consumption and pollution emissions. The simulation results represent the effectiveness and applicability of the proposed control strategy. Also, results indicate that proposed controller is reduced fuel consumption in real and modal driving cycles about 21% and 6% respectively.     

A revised branch‐and‐price algorithm for dial‐a‐ride problems with the consideration of time‐dependent travel cost

Developing demand responsive transit systems are important with regard to meeting the travel needs for elderly people. Although Dial‐a‐ride Problems (DARP) have been discussed for several decades, most researchers have worked to develop algorithms with low computational cost under the minimal total travel costs, and fewer studies have considered how changes in travel time might affect the vehicle routes and service sequences. Ignoring such variations in travel time when design vehicle routes and schedules might lead to the production of inefficient vehicle routes, as well as incorrect actual vehicle arrival times at the related nodes. The purpose of this paper is to construct a DARP formulation with consideration of time‐dependent travel times and utilizes the traffic simulation software, DynaTAIWAN, to simulate the real traffic conditions in order to obtain the time‐dependent travel time matrices. The branch‐and‐price approach is introduced for the time‐dependent DARP and tested by examining the sub‐network of Kaohsiung City, Taiwan. The numerical results reveal that the length of the time window can significantly affect the vehicle routes and quantitative measurements. As the length of the time window increases, the objective value and the number of vehicles will reduce significantly. However, the CPU time, the average pickup delay time, the average delivery delay time and the average actual ride time (ART)/direct ride time (DRT) will increase significantly as the length of the time window increases. Designing the vehicle routes to reduce operating costs and satisfy the requirements of customers is a difficult task, and a trade‐off must be made between these goals. Copyright © 2014 John Wiley & Sons, Ltd.     

A literature review of mobility services: definitions,modelling state-of-the-art,and key considerations for a conceptual modelling framework

ABSTRACT

This paper presents a comprehensive literature review focused on the supply side of mobility services, providing relevant insights at the conceptual, operational, and modelling levels. Definitions are first drawn from the Mobility as a Service paradigm due to its predominance in the literature. This is followed by an assessment of the operational features of a range of mobility services, including carsharing, bikesharing, ridehailing, and demand responsive transit. To conclude the review, the state-of-the-art in modelling approaches for mobility services is reported, at different levels of complexity and integration. Three of the most important findings and arguments from this paper suggest that a high degree of generality exists for operational features of mobility services; that it is essential to make a distinction between Mobility as a Service and a mobility service in isolation; along with the argument that human agency should be carefully considered in modelling efforts, both for user agent and driver agent decision-making processes. Finally, key considerations are proposed for the future development of a conceptual framework for modelling the supply side of mobility services, which would have a generic service provider model as its core component.     

Development of a signal-head-free intersection control logic in a fully connected and autonomous vehicle environment

Establishment of effective cooperation between vehicles and transportation infrastructure improves travel reliability in urban transportation networks. Lack of collaboration, however, exacerbates congestion due mainly to frequent stops at signalized intersections. It is beneficial to develop a control logic that collects basic safety message from approaching connected and autonomous vehicles and guarantees efficient intersection operations with safe and incident free vehicle maneuvers. In this paper, a signal-head-free intersection control logic is formulated into a dynamic programming model that aims to maximize the intersection throughput. A stochastic look-ahead technique is proposed based on Monte Carlo tree search algorithm to determine the near-optimal actions (i.e., acceleration rates) over time to prevent movement conflicts. Our numerical results confirm that the proposed technique can solve the problem efficiently and addresses the consequences of existing traffic signals. The proposed approach, while completely avoids incidents at intersections, significantly reduces travel time (ranging between 59.4% and 83.7% when compared to fixed-time and fully-actuated control strategies) at intersections under various demand patterns.     

浅谈统筹广西城乡道路客运协调发展的对策

统筹城乡道路客运协调发展是推动经济社会发展的必然要求,同时也是推进综合运输体系建设的重要内容。文章阐述了广西城乡道路客运的发展现状与问题,从管理、规划、政策、发展、服务五方面探讨了统筹广西城乡道路客运协调发展的对策。     

基于工作流和快速开发平台技术的企业节能减排项目管理系统设计

以工作流技术为核心对企业节能减排项目管理系统进行建模,从而使项目管理的业务逻辑和具体功能独立开来,达到项目管理的统一、有序的管理,提高管理系统的兼容性和整体协作性,使系统的组织更顺畅,工作流程更灵活、适应性更强。采用快速开发平台技术,通过参数定制的方式进行开发,相较于传统的编程开发模式,通过对智能报表、数据维护、MVC业务控制和其他参数的管理,可以方便、快速、高质量地开发复杂的业务系统。     

含缺陷压力管道安全评定方法研究的现状与发展

含缺陷压力管道安全评定的方法较多,主要有极限载荷控制的塑性失效准则、断裂力学J积分的评定方法、英国R6双判据准则评定方法、美国ASME规范评定方法、参数不确定性缺陷的安全评定方法等.文章对这些方法加以简要的概括和评述,并分析了有些方法之间的区别与联系,同时指出工程化、可靠性和智能化是当前含缺陷压力管道安全评定方法的发展趋向.     

交通科技进步对西部经济发展贡献率的实证研究

文章以贵州、广西两省公路和水路运输行业发展中科技进步作用的定量测算为实证,结合发展经济学的理论基础和西部地区的实际情况,利用生产函数的经济增长模型,研究交通行业科技进步与西部地区经济发展的关系。     

Development of a simulation platform for safety impact analysis considering vehicle dynamics,sensor errors,and communication latencies: Assessing cooperative adaptive cruise control under cyber attack

While safety is one of the most critical contributions of Cooperative Adaptive Cruise Control (CACC), it is impractical to assess such impacts in a real world. Even with simulation, many factors including vehicle dynamics, sensor errors, automated vehicle control algorithms and crash severity need to be properly modeled. In this paper, a simulation platform is proposed which explicitly features: (i) vehicle dynamics; (ii) sensor errors and communication delays; (iii) compatibility with CACC controllers; (iv) state-of-the-art predecessor leader following (PLF) based cooperative adaptive cruise control (CACC) controller; and (v) ability to quantify crash severity and CACC stability. The proposed simulation platform evaluated the CACC performance under normal and cybersecurity attack scenarios using speed variation, headway ratio, and injury probability. The first two measures of effectiveness (MOEs) represent the stability of CACC platoon while the injury probability quantifies the severity of a crash. The proposed platform can evaluate the safety performance of CACC controllers of interest under various paroxysmal or extreme events. It is particularly useful when traditional empirical driver models are not applicable. Such situations include, but are not limited to, cyber-attacks, sensor failures, and heterogeneous traffic conditions. The proposed platform is validated against data collected from real field tests and tested under various cyber-attack scenarios.