MULTISIM2001在电控分配泵标定电路设计中的应用

对MULTISIM2001软件的功能和特点进行了简要的介绍,并在VP37电控分配泵的标定电路设计中使用MULTISIM2001软件进行了模拟与仿真。仿真结果表明,通过仿真软件可以快速、准确地反映试验电路的实际工作情况,缩短硬件电路的开发周期,节省大量的试验资源。     

一款基于UC3842的开关电源设计与仿真

本文基于UC3842芯片设计并仿真了一款开关电源,详细分析了主电路的工作原理及控制电路的设计,并在仿真软件Multisim中搭建了仿真电路,验证了设计的正确性。     

使用proteus仿真矩阵键盘时遇到的问题和解决方案

通过Proteus软件的使用我们能够轻易地获得一个功能齐全、实用方便的单片机实验室，但是，仿真软件毕竟与实际电路有差别，本文指出了在使用proteus软件仿真矩阵式键盘时遇到的问题，并给出了解决方案。     

一种新型的基于FPGA数字秒表的设计方法

本文介绍了一种新型的基于FPGA的数字秒表的设计与实现方法，给出了顶层电路图，和各模块的设计，增加了消除抖动的控制方法，消除了开关按键的机械抖动。通过编辑、编译和器件编程，用MODELSIM仿真软件进行了仿真，并将编程器文件下载到ISP实验板TB—BD—TS101开发板中，经实际电路测试验证，达到了预期的设计要求，显示结果准确无误。     

某车型预热起动电路研究与优化设计

介绍某整车电路优化前的部分电路原理,通过理论分析并结合MATLAB/Simulink软件对电路进行模拟仿真,证实了电路存在异常及其来源;电路优化设计,并用MATLAB/Simulink软件对优化后的电路进行仿真,证实异常已消除。     

汽车点火系统建模及传导骚扰仿真

为预测点火系统产生的传导骚扰,在预先建立点火系统各元件的等效电路模型,并利用三维电磁场数值计算方法计算出各电路参数的基础上,运用Ansoft Simplorer仿真软件建立了整个点火系统传导骚扰的仿真模型。仿真结果得到试验的验证,表明所建模型有效。     

基于模糊C均值聚类的模拟电路故障诊断

介绍了模糊C均值聚类分析的理论,并将该理论应用于模拟电路故障诊断.在模拟电路故障仿真分析中引入有容差的各类数据样本,运用迭代优化的模糊聚类算法生成故障模式,然后,将故障模式应用于未知故障情形进行诊断,仿真表明,该方法高效准确.     

基于Proteus和Keil的汽车空调定时启动装置的仿真设计

以Proteus和Keil为开发平台,设计并仿真汽车空调定时启动装置;详细介绍汽车空调定时启动装置的电路及控制程序,在Proteus环境下联合Keil将软硬件相结合,成功实现定时启动装置的仿真调试,并可直观演示。结果表明,该装置可以实现温度等数据的采集、处理、实时显示及系统键盘设置等功能,达到了设计要求。在Proteus和Keil环境下可完成系统的硬件和软件调试、测试系统的性能,在实际应用中可降低设计成本,缩短开发周期,提高效率。     

发动机电磁气门驱动有限元法仿真计算

在发动机电磁气门驱动(EVA)研究中,利用电磁驱动CAE软件FLUX_2D/3D进行了EVA装置的仿真计算。仿真结果与试验结果基本相符,说明计算中建立的几何模型、动力学模型、网格划分、对驱动电路的处理以及设置的各种边界条件均合理可行。这种方法可用于EVA设计方案预选,并可分析影响EVA动态特性和电磁铁吸力的各种关键因素。     

HEV控制器硬件在环仿真平台的研究与开发

针对控制器传统开发方法中存在的局限性以及混合动力汽车动力传动系统控制的复杂性,应用控制系统现代开发技术,为某型混合动力客车多能源动力总成控制器开发了硬件在环仿真测试平台,该平台包括实时硬件和系统模型、信号调理电路等,并利用它对控制器进行了仿真测试。仿真测试结果与试验结果说明,所开发平台模型的精度基本能够满足仿真测试要求。控制器的环境试验和在EMC试验中的成功应用以及控制器在车上的正常运行,验证了在混合动力汽车多能源动力总成控制器的开发过程中采用自行开发硬件在环仿真测试平台这一技术方案的可行性。     

汽车动力性的计算机模拟

建立了汽车动力性的目标函数,给出了其求解方法,提出了动力性的约束条件,利用VB语言实现了汽车动力性的计算机模拟。     

Random Response of Tractor-Semitrailer System

This work describes an analytical study of the dynamic behaviour of a tractor-semitrailer vehicle. A digital computer simulation was used to describe the longitudinal, vertical, and pitching motions of the vehicle travelling over a stationary random road surface. A man-seat model was also incorporated into the simulation. Vehicle response to road irregularities has been studied by assuming two different roads for loaded and unloaded cases.

Numerical results are presented for vehicle, showing system eigenvalues, power spectral densities and root mean square values of the linear and angular accelerations and displacements. Vehicle acceleration response is compared with the ISO riding comfort standard. All results for the loaded and unloaded cases and for smooth and rough roads indicated that an uncomfortable ride would result from vehicle response.     

基于SIP协议的高速公路VoIP网关的设计和实现

基于SIP协议,提出了一种应用于高速公路监视控制系统的VoIP接听控制网关模块的设计与实现。通过该模块的使用可以避免计算机网络和电话网络的重复建设,提高线路的协同工作效率,同时用此模块取代传统的PBX,可大大降低设备运行维护成本。     

Random Response of Tractor-Semitrailer System

SUMMARY

This work describes an analytical study of the dynamic behaviour of a tractor-semitrailer vehicle. A digital computer simulation was used to describe the longitudinal, vertical, and pitching motions of the vehicle travelling over a stationary random road surface. A man-seat model was also incorporated into the simulation. Vehicle response to road irregularities has been studied by assuming two different roads for loaded and unloaded cases.

Numerical results are presented for vehicle, showing system eigenvalues, power spectral densities and root mean square values of the linear and angular accelerations and displacements. Vehicle acceleration response is compared with the ISO riding comfort standard. All results for the loaded and unloaded cases and for smooth and rough roads indicated that an uncomfortable ride would result from vehicle response.     

Comparison of PMP and DP in fuel cell hybrid vehicles

Pontryagin’s Minimum Principle (PMP) and Dynamic Programming (DP) are both from the optimal control theory and can both achieve optimal trajectories when they are applied to power management strategies of hybrid vehicles. However they have totally different control concepts. In order to select the superior one, the PMP-based and the DP-based power management strategies are introduced and compared for a fuel cell hybrid vehicle (FCHV) in this paper. The two power management strategies are applied to the FCHV in a computer simulation environment, and the simulation results from the two strategies are compared when the control variable for the PMP is fuel cell system (FCS) net power and for the DP is battery power. As a result, the superiority of the PMP-based power management strategy is proved.     

发动机特性仿真的研究

介绍了获得发动机不同油门开度外特性试验数据的试验方法,利用试验获得的发动机数据建立了发动机的动力性和经济性的仿真模型,使用建立的仿真模型可以模拟各种不同工况下发动机的状态,实现用计算机代替发动机,为AMT电控单元的开发提供一个虚拟试验平台。     

Dynamic modeling of the electro-mechanical configuration of the Toyota Hybrid System series/parallel power train

The hybridization of the conventional thermal vehicles nowadays constitutes a paramount importance for car manufacturers, facing the challenge of minimizing the consumption of the road transport. Although hybrid power train technologies did not converge towards a single solution, series/parallel power trains with power-split electromechanical transmissions prove to be the most promising hybrid technology. In fact, these power trains show maximum power train overall efficiency and maximum fuel reduction in almost all driving conditions compared to the conventional and other hybrid power trains. This paper addresses the model and design of the electro-mechanical configuration of one of the most effective HEV power trains: case study of the 2nd generation Prius. It presents the simulation work of the overall operation of the Toyota Hybrid System (THS-II) of the Prius, and explores not only its power-split eCVT innovative transmission system but also its overall supervision controller for energy management. The kinematic and dynamic behaviors of the THS-II power train are explained based on the power-split aspect of its transmission through a planetary gear train. Then, the possible regular driving functionalities that result from its eCVT operation and the energy flow within its power train are outlined. A feed-forward dynamic model of the studied power train is next proposed, supervised by a rule-based engineering intuition controller. The energy consumption of the THS-II proposed model has been validated by comparing simulation results to published results on European, American and Japanese regulatory driving cycles.     

大容积气袋数值模拟方法的研究

气袋缓冲技术已广泛用于工业产品的缓冲保护,其数值模拟技术是设计和验证过程中的一个重要手段。本文针对实际工业应用中的某大容积缓冲气袋,通过数值模拟与试验对比,获得了与实际缓冲特性较为一致的气袋模型。通过对模拟结果的研究,讨论了模拟中3种主要控制参数对缓冲特性的影响,得到了一种适合于工业应用的设计方法。     

汽车动力性仿真与灵敏度分析

汽车动力性是汽车最重要的性能之一。为了快速、准确及有效地预测汽车动力性,建立了汽车动力性数学模型,用MATLAB软件编制了汽车动力性仿真程序。以某款微型车为计算实例进行了仿真计算并进行了动力性参数灵敏度分析,仿真结果与该车道路试验结果基本吻合,各参数对汽车动力性的影响以动力传动系的机械效率和汽车的总质量最为显著,分析结果对改善整车动力性能提供了参考。