共查询到20条相似文献,搜索用时 140 毫秒
1.
船舶喷水推进装置具有推进效率高、噪音小、操作性能好等特点,其应用价值将越来越受到高速公务船设计者和使用者的重视。文中简要介绍了喷水推进装置的基本原理和结构;分析了喷水推进装置的优点;探讨了对行驶在中国海域大型高速公务船上应用喷水推进装置的可能性。 相似文献
2.
3.
4.
5.
6.
喷水推进是与中高速船舶相匹配的一种具有时代特征的先进推进方式,显著提高了船舶的快速性与操纵性,广泛应用于国内外高性能船舶。开展基于动量通量的试验技术研究,可有效提高喷水推进船舶航速预报精度,促进喷水推进技术快速发展与应用。本文在梳理喷水推进船模自航试验研究成果的基础上,分析了当今国际上喷水推进自航试验主流方法"动量通量法"的原理与关键技术以及应用状况,对航速预报精度有显著影响的流量、进出口动量通量的测量方法以及喷水推进装置对船体的作用等参数的测量方法进行了归纳,在此基础上针对国内外的差距,提出了我国发展相关技术的建议。 相似文献
7.
我国于1956年曾制造了一批喷水推进船舶,现已用于各省之内河中。在运用过程中发生了不同的效果,有待于作进一步的研究。我国工农业大跃进后,各省内河均需大量的浅水船舶,故对喷水推进船舶作一深入的分析研究,实属必要。作者在本文中首先从理论上作了探讨指出了提高喷水船效率的一些方向;并举出实例,对喷水推进及螺旋桨推进作了分析比较,从而归纳出几点结论。本文共分三部份:(一)喷水推进的理论效率;(二)喷水推进与螺旋桨推进的比较;(三)结论。 相似文献
8.
9.
本文介绍喷水推进应用,分析了喷水推进泵在船舶应用上进入空泡区的特性、喷水推进的空泡特点、空泡的危害性以及避免进入空泡区的措施。 相似文献
10.
喷水推进是一种特殊的船舶推进型式,近二十年来才逐渐发展成熟。由于喷水推进具有噪声小、适应变工况能力强、抗空泡性能良好等优点,因而在高速、高性能船舶上得到越来越多的应用。本文分析了喷水推进的特点及工作原理,阐述了设计参数的计算、选择方法.本文最后总结了喷水推进器四种不同的设计流程。 相似文献
11.
《船舶与海洋工程学报》2014,(2)
正In the paper"Influence of Fouling Assemblage on the Corrosion Behaviour of Mild Steel in the Coastal Waters of The Gulf of Mannar,India"in Vol.12,No.4,Page:509,References were lost,and the two authors’biographies were identical.The correct text is shown below.We apologize to the authors and our readers for any inconvenience caused by the errors. 相似文献
13.
《船舶与海洋工程学报》2014,(4)
正St.John's,Newfoundland,Canada,May 31-June 5,2015 OMAE2015 is the ideal forum for researchers,engineers,managers,technicians and students from the scientific and industrial communities from around the world to: meet and present advances in technology and its scientific support; 相似文献
14.
联合作战计划和执行系统 总被引:2,自引:1,他引:1
全球指挥控制系统(GCCS)实施当前美国海军网络中心战信息基础设施的联合计划网络。联合作战计划和执行系统(JOPES)支持GCCS实现联合计划。JOPES有两类计划:时间不限的精密预案计划生成作战计划、方案计划或职能计划;时间敏感的危机行动计划生成作战命令或战役方案。前者在和平时期创建的作战计划是后者的计划基础,加速应付危机的能力。 相似文献
15.
In terms of equal sailing distances, where is the inflexion when ships depart from ports in the Asian Continent to New York via Suez and/or Panama?
The answer is China South Port Group (Hong Kong, Shenzhen and Guangzhou). 相似文献
The answer is China South Port Group (Hong Kong, Shenzhen and Guangzhou). 相似文献
16.
桥梁防撞设施物理模型试验 总被引:1,自引:0,他引:1
物理模型试验是预报防撞设施所受撞击力及优化设计方案的主要方法之一。结合杭州湾大桥柔性防撞设施及东海大桥独立式防撞体设计方案,阐述了船—防撞体撞击试验的基本原理、方法、试验方案及相关试验结果。提出了柔性防撞系统的优化方案。试验结果表明,该方案经济有效,可供预报类似桥梁防撞设施撞击力时参考。 相似文献
17.
印尼某电厂项目码头水工建筑物包括码头、防波堤和护岸等主要组成部分。在该项目水工建筑物的设计过程中,综合考虑当地的自然条件、施工能力和材料来源等因素,不断优化结构选型和结构断面。根据不同使用要求,护岸分别采用直立式和斜坡式2种结构型式,推荐的设计方案节省投资、施工方便,可供同类工程设计参考。 相似文献
18.
19.
20.
Recent measurements of wave induced hull strain and flexure in RN warships are presented together with the derivation of the current design criteria for extreme hull girder bending loads. The history of the development of the shipboard instrumentation used is given and recent developments to improve the quality and ease of analysis of the data are described. An unexpectedly high transverse asymmetry in the longitudinal strains measured in destroyers is shown to be the result of a combination of vertical and lateral bending in oblique seas. Finally recent theoretical comparisons between the loading of Deep-Vee hulls and conventional UK rounded bilge hulls are presented which demonstrate the higher loading experienced by this type of hull form. 相似文献