共查询到20条相似文献,搜索用时 218 毫秒
1.
This papers examines the different choices of High Speed Craft (HSC) hull design available and briefly looks at the advantages and disadvantages of each hull form. The trends in various design aspects of HSC such as speed, capacity and size are studied. An investigation on the HSC development is conducted and the future of HSC in the UK is studied. A study onboard an HSC with the aim of trying to determine what passengers think of HSC and why they travel by them is also conducted. Finally, an analysis of the possible market for HSC is carried out. 相似文献
2.
《船舶与海洋工程学报》2017,(2)
Resistance analysis is an important analytical method used to evaluate the hydrodynamic performance of High Speed Craft(HSC). Analysis of multihull resistance in shallow water is essential to the performance evaluation of any type of HSC. Ships operating in shallow water experience increases in resistance because of changes in pressure distribution and wave pattern. In this paper, the shallow water performance of an HSC design concept, the semi-Small Waterplane Area Twin Hull(semi-SWATH) form, is studied. The hull is installed with fin stabilizers to reduce dynamic motion effects, and the resistance components of the hull, hull trim condition, and maximum wave amplitude around the hull are determined via calm water resistance tests in shallow water. These criteria are important in analyzing semi-SWATH resistance in shallow water and its relation to flow around hull. The fore fin angle is fixed to zero degrees, while the aft fin angle is varied to 0o, 5o, 10o, and 15o. For each configuration, investigations are conducted with depth Froude numbers(Fr H) ranging from 0.65 to 1.2, and the resistance tests are performed in shallow water at the towing tank of UTM. Analysis results indicate that the resistance, wave pattern, and trim of the semi-SWATH hull form are affected by the fin angle. The resistance is amplified whereas the trim and sinkage are reduced as the fin angle increases. Increases in fin angle contribute to seakeeping and stability but affect the hull resistance of HSCs. 相似文献
3.
Resistance analysis is an important analytical method used to evaluate the hydrodynamic performance of High Speed Craft (HSC). Analysis of multihull resistance in shallow water is essential to the performance evaluation of any type of HSC. Ships operating in shallow water experience increases in resistance because of changes in pressure distribution and wave pattern. In this paper, the shallow water performance of an HSC design concept, the semi-Small Waterplane Area Twin Hull (semi-SWATH) form, is studied. The hull is installed with fin stabilizers to reduce dynamic motion effects, and the resistance components of the hull, hull trim condition, and maximum wave amplitude around the hull are determined via calm water resistance tests in shallow water. These criteria are important in analyzing semi-SWATH resistance in shallow water and its relation to flow around hull. The fore fin angle is fixed to zero degrees, while the aft fin angle is varied to 0°, 5°, 10°, and 15°. For each configuration, investigations are conducted with depth Froude numbers (Fr H ) ranging from 0.65 to 1.2, and the resistance tests are performed in shallow water at the towing tank of UTM. Analysis results indicate that the resistance, wave pattern, and trim of the semi-SWATH hull form are affected by the fin angle. The resistance is amplified whereas the trim and sinkage are reduced as the fin angle increases. Increases in fin angle contribute to seakeeping and stability but affect the hull resistance of HSCs. 相似文献
4.
Systematic theoretical and experimental studies were carried out to establish methods for hull form design, optimum dimension
selection, and resistance estimation for displacement-type super-high-speed ships. In this study, a theoretical hull form
design method for displacement-type super-high-speed ships was first developed using the minimum resistance theory and a sectionally
varying hull form equation. Using an established hull form design method, a series of 60 hull forms were prepared with systematic
variations of the most important design variables, and model tests were conducted for these ship models. Finally, regression
analyses were performed for the results of the model tests. The study was very successful, and the prepared computer programs
are now being actively used as efficient tools for the design of the displacement-type super-high-speed ships. 相似文献
5.
结合有限元理论,利用基于试验点的设计方法对藕节形耐压壳体进行优化设计。基于试验点的优化设计的相关理论,利用正交试验设计确定25组试验点。利用参数化建模的方法建立25组试验点对应的藕节形耐压壳体的三维模型。基于有限元理论,利用Workbench对其强度及稳定性进行分析,得到各试验点参数对应的最大应力、临界失稳载荷及壳体质量。根据有限元分析结果,构造最大应力、临界失稳载荷及壳体质量关于球心间距半径比、厚度及切弧角的响应面;利用遗传算法,结合构造的响应面,对藕节形壳体进行优化设计并利用Workbench对其进行校核,验证所设计壳体的安全性。 相似文献
6.
Glenn D. Aguilar Hiroyuki Yamamoto Takeo Koyama 《Journal of Marine Science and Technology》1996,1(3):138-148
The development of a parametric hull form design system utilizing combined knowledge-based and objectoriented methodologies,
approaches, and techniques is the major purpose of this research. One objective was the development of a powerful, intuitive,
and parameter-based hull definition system with a related hull definition advisory system that would provide useful and necessary
advice to the user. Object and knowledge modeling activities were conducted during the analysis and design stage to facilitate
the implementation of a hull design program and advisory system. The hull design system includes the generation of a geometric
model from a process of aggregating simple user-selected shapes representing different boundaries. Design involves the capability
to vary simple parameters such as entrance angles, length-breadth ratios, and radii to define local and general surface geometries.
Hydrostatic calculations are included for analysis; results are referred to an advisory system for evaluation and the determination
of the acceptability of parameters and analysis results. The advisory system includes a knowledge bases consisting of hull
form databases, results of the statistical analysis of data, design parameter constraints, and expert knowledge acquired from
designers, reference materials, and technical reports. Use of the design tool with the advisory system results in the rapid
generation of hull forms and associated design evaluations. Flexibility in decision making results from the separation of
the design system from the advisory system. The independence of the two systems allows for a wide range of user experience
with experts using the design tool with minimal reference to the advisory system. On the other hand, the expertise and knowledge
stored in the advisory system is fully available to inexperienced designers and users. 相似文献
7.
8.
V型无压载水船舶型线设计变换研究 总被引:3,自引:0,他引:3
无压载水船舶作为一种新的船舶设计理念已经在国外展开了相关的研究,而在中国还研究甚少。就V型无压载水方案的型线设计变换进行研究,首次提出基于母型的横剖面面积曲线基本不变的V型无压载水型线设计变换方法。该方法对母型船的型线进行底部V型变换,使设计船舶的底部呈现一定的倾角,同时增大船宽。变换后设计船舶的横剖面面积曲线和母型船保持一致,变换方法简单可靠,在保证设计船舶的船长、设计吃水、排水量等参数基本不变的情况下,较好地解决了设计船舶型线的光顺性问题。 相似文献
9.
10.
The prediction of a ship's resistance especially the viscous wave-making resistance is an important issue in CFD applications. In this paper, the resistances of six ships from hull 1 to hull 6 with different hull forms advancing in still water are numerically studied using the solver naoe-FOAM-SJTU, which was developed based on the open source code package OpenFOAM. Different components of the resistances are computed and compared while considering two speed conditions (12 kn and 16 kn). The resistance of hull 3 is the smallest while that of hull 5 is the largest at the same speed. The results show hull 3 is a good reference for the design of similar ships, which can provide some valuable guidelines for hull form optimization. 相似文献
11.
The prediction of a ship's resistance especially the viscous wave-making resistance is an important issue in CFD applications. In this paper, the resistances of six ships from hull 1 to hull 6 with different hull forms advancing in still water are numerically studied using the solver naoe-FOAM-SJTU, which was developed based on the open source code package OpenFOAM. Different components of the resistances are computed and compared while considering two speed conditions(12 kn and 16 kn). The resistance of hull 3 is the smallest while that of hull 5 is the largest at the same speed. The results show hull 3 is a good reference for the design of similar ships, which can provide some valuable guidelines for hull form optimization. 相似文献
12.
13.
随着计算机和CFD技术水平的提高,数值模拟所需时间逐渐缩短、准确度逐步提高,利用数值模拟作为一种辅助手段进行方案择优已经逐渐流行。本文利用商用软件对广船国际提供的某油船三种线型进行了设计和结构吃水工况下的数值计算,包括阻力、自航计算,并且根据ITTC推荐规程做了实船尺度下的数据分析;以实船尺度下保持目标航速所需要的收到功率最小为评判标准,通过对该船三个方案线型不同吃水情况下计算结果的比较分析,评价了线型方案的优劣。通过数值模拟结果与物理试验结果的比较分析,验证了本文计算方法可靠性和准确性,也展示了数值模拟在船型方案择优过程中的作用,可以用于综合评价不同方案线型的船舶水动力性能。 相似文献
14.
15.
16.
This paper reports a study on hull sizing for tension leg platforms (TLPs) using an optimization model. At the conceptual or basic design stage of an offshore platform project, hull sizing is one of the most important tasks, having a great impact on later stages of the project. Hull sizing is usually done by an engineering team combining several disciplines and taking account of factors including hydrodynamics, global performance, stability, and structure. This makes it difficult and time-consuming to optimize the hull dimensions. In this study, hull sizing was modeled as an optimization problem in which a range of design criteria had to be satisfied and an objective function minimized. Sizing was then performed using optimization algorithms. For each module, the result calculated by our method was compared with that produced by commercial software (DNV Sesam). Our system was tested for conventional TLP design in three specific metocean environments. Finally, our optimized hull shape was compared with an existing TLP, and the difference in hull shape demanded by each environment was analyzed. 相似文献
17.
船舶的水下爆炸响应是一个重要而复杂的问题,对船舶抗爆能力的提高有着重要的意义.本文使用商业有限元程序ABAQUS对某船体在水下爆炸冲击波作用下的动态响应进行了数值模拟.该问题解决中包括流固耦合问题,边界条件的处理.详细给出了某船舶在水下爆炸的响应结果,揭示了船体的加速度响应、船体的应力响应、船体的速度响应3个方面的响应规律.通过和相关试验数据进行比较,表明数值结果与试验结果两者吻合良好.最后考察并给出了各层甲板在关键肋位上的点的应力和速度响应峰值.所得到船舶在水下爆炸下的响应规律,为船舶设计提供有力的依据. 相似文献
18.
19.
20.
船体三维设计软件的使用,使设计人员可利用计算机实现模拟造船,直接发现设计中存在的错误和问题,以便提高设计精度,减少差错。该文以沪东中华造船有限公司开发的EFSHD软件为平台,以8000t江海直达货轮为例进行船体三维建模设计。介绍了船体某分段的平面板架和曲面板架的建模方法,重点分析了船体曲面板架创建功能的多样性、快速性,提出了船体板架三维建模中应注意的几个问题;建模中掌握的一些操作技巧及注意事项可使整个建模过程流畅自如,并可供造船厂在生产中参考应用。 相似文献