城市交通系统通行性影响因素及计算理论

文章分析了震后城市交通系统通行性的影响因素,提出了包含路段单元通行概率、路段连通概率及路网连通概率的城市交通系统通行性计算理论,为城市路网的连通可靠性评价提供参考。     

临时关闭道路以疏导城市道路交通流的可行性分析

文章基于Braess悖论,以单位车辆的平均出行时间为最优目标,以网络道路系统为约束条件,从逆向思维角度建立了通过临时关闭道路引导交通流以缓解城市道路交通拥挤的Narsh均衡非线性规划模型,并以北京二环道路网络为研究对象进行了实例分析。结果表明,在城市道路网中,关闭部分路段并不能明显缓解交通拥堵现状,但可以在不影响路网整体通行时间的条件下改善路网局部拥堵状况。建议城市道路交通临时疏导方案应该根据路网交通流的分布特点和道路通过能力等因素进行制订。     

低碳经济背景下河谷型城市交通级配体系研究

文章针对交通方式的合理比例分配问题,提出了交通级配的概念,构建了城市交通级配体系,并基于对西部河谷型城市道路网络特征的分析,以兰州市为例,提出了相应的交通管理措施,为城市绿色交通建设的实现提供方法借鉴。     

基于DEA法的大城市快速路网综合评价研究

文章从定量和定性两个角度,建立了快速路网运行效率的综合评价指标体系,并利用DEA方法建立快速路网综合评价模型,通过实例对城市快速路网的运行效率进行有效性评价分析。结果表明,该方法具有较强的可操作性和实用性。     

Welfare evaluation with a road capacity constraint

Severe traffic congestion in and around many cities across the world has resulted in programmes of extensive road building and other capacity increasing projects. But traffic congestion has often not fallen in the long run and neither has journey speed increased. Demand for peak period road travel, particularly by car, has grown so strongly that increases in road capacity have been quickly matched by increased road use. This paper develops a model of a road network characterised by insatiable road passenger (car and bus) demand. The model parameters are calibrated on a typical urban road network, and a number of simulations conducted to determine social welfare after the introduction of a road capacity constraint into the optimisation process. The empirical results have an important policy implication for the evaluation of projects that increase road capacity, namely that standard methods of cost-benefit analysis may tend to overestimate the net benefits of such projects by a significant amount. Although the model is developed in the context of roads and road traffic congestion, it could also be applied to air travel.     

Evaluation of a reactive dynamic route guidance strategy

The aim of the paper is to evaluate the performance of a new strategy which is able to control dynamic route guidance (DRG) systems, mainly in urban road networks. The purpose of this strategy is to achieve dynamic user equilibrium in the network, even in abnormal network conditions, for example when there is an unexpected increase in traffic volume. It is based on feedback concept and it reacts to the traffic conditions observed in real time by adopting a decentralized structure.A series of experiments was performed, by means of a traffic micro-simulator, in a section of an urban road network. In the situations examined, the results seem to be quite positive. The analyses of the link level show that all of the various travel alternatives to reach the destination become more advantageous for users if DRG devices become more widespread among vehicles. In some cases we observe that the strategy succeeds in maintaining the possible alternatives in equilibrium conditions, by distributing users among the feasible turns. At no point in our investigations do we observe an unstable behaviour of the system, even when the number of vehicles fitted with a DRG device increases.     

A methodology to control urban traffic noise under the constraint of environmental capacity: A case study of a double-decision optimization model

This paper presents a novel methodology to control urban traffic noise under the constraint of environmental capacity. Considering the upper limits of noise control zones as the major bottleneck to control the maximum traffic flow is a new idea. The urban road network traffic is the mutual or joint behavior of public self-selection and management decisions, so is a typical double decision optimization problem.The proposed methodology incorporates theoretically model specifications. Traffic noise calculation model and traffic assignment model for O–D matrix are integrated based on bi-level programming method which follows an iterated process to obtain the optimal solution. The upper level resolves the question of how to sustain the maximum traffic flow with noise capacity threshold in a feasible road network. The user equilibrium method is adopted in the lower layer to resolve the O–D traffic assignment.The methodology has been applied to study area of QingDao, China. In this illustrative case, the noise pollution level values of optimal solution could satisfy the urban environmental noise capacity constraints. Moreover, the optimal solution was intelligently adjusted rather than simply reducing the value below a certain threshold. The results indicate that the proposed methodology is feasible and effective, and it can provide a reference for a sustainable development and noise control management of the urban traffic.     

Improving fuel consumption and CO2 emissions calculations in urban areas by coupling a dynamic micro traffic model with an instantaneous emissions model

Τhis study demonstrates the combination of a microscopic traffic simulator (AIMSUN) with an instantaneous emissions model (AVL CRUISE) to investigate the impact of traffic congestion on fuel consumption on an urban arterial road. The micro traffic model was enhanced by an improved car-following law according to Morello et al. (2014) and was calibrated to replicate measured driving patterns over an urban corridor in Turin, Italy, operating under adaptive urban traffic control (UTC). The method was implemented to study the impact of congestion on fuel consumption for the category of Euro 5 diesel <1.4 l passenger cars. Free flow and congested conditions led to respective consumption differences of −25.8% and 20.9% over normal traffic. COPERT 5 rather well predicted the impact of congestion but resulted to a much lower relative reduction in free flow conditions. Start and stop system was estimated to reduce consumption by 6% and 11.9% under normal and congested conditions, respectively. Using the same modelling approach, UTC was found to have a positive impact on CO₂ emissions of 8.1% and 4.5% for normal and congested conditions, respectively, considering the Turin vehicle fleet mix for the year 2013. Overall, the study demonstrates that the combination of detailed and validated micro traffic and emissions models offers a powerful combination to study traffic and powertrain impacts on greenhouse gas and fuel consumption of on road vehicles over a city network.     

Modeling urban taxi services in road networks: Progress,problem and prospect

Traditionally, many economists have examined the models and economics of urban taxi services under various types of regulation such as entry restriction and price control in an aggregate way. Only recently have we modeled urban taxi services in a network context. A realistic method has been proposed to describe vacant and occupied taxi movements in a road network and taxi drivers' search behavior for customers. A few extensions have been made to deal with demand elasticity and congestion effects together with development of efficient solution algorithms. Calibration and validation of the network taxi service models have been conducted towards their practical applications. This paper presents an overview of the research that has been carried out by the authors to develop network equilibrium models and solution algorithms for urban taxi services, and offers perspectives for future researches.     

广州市道路交通规划建设探讨

文章针对广州市道路系统规划的基本状况及存在的问题,结合国外城市道路交通规划建设及管理经验,提出了基于小尺度道路网、合理道路等级级配和快速路系统的城市道路交通规划建设优化措施及建议,为缓解城市交通拥堵提供理论依据。     

南宁市城市道路建设的影响因素分析

如何科学合理地进行城市道路网建设是目前城市建设的核心问题。文章以南宁市十二五期间城市道路网建设规划为例,介绍了城市道路建设影响因素的类别及内容,分析了交通基础设施建设、重大项目建设、旧城改造、管网建设、外围城镇发展等与城市道路路网建设的相互关系,并通过指标测算确定规划期内道路建设的合理规模。     

A traffic-condition-based route guidance strategy for a single destination road network

Most of existing route guidance strategies achieves user optimal equilibrium by comparing travel time. Measuring travel time, however, might be uneasy on an urban road network. To contend with the issue, the paper mainly considers easily obtained inflow and outflow of a link and road capacity as input, and proposes a route guidance strategy for a single destination road network based on the determination of free-flow or congested conditions on alternative routes. An extended strategy for a complex network and a feedback approximation for avoiding forecast are further explored. Weaknesses of the strategy are also explicitly analyzed. To test the strategy, simulation investigations are conducted on two networks with multiple parallel routes. The results indicate that the strategy is able to provide stable splitting rates and to approximate user optimal equilibrium in different conditions, in particular when traffic demand is high. This strategy has potential to be applied in an urban road network due to its simplicity and easily obtained input data. The strategy is also applicable for single destination if some alternatives and similar routes are available.     

Does urbanization lead to less energy use on road transport? Evidence from municipalities in Norway

The relationship between urbanization, energy use, and CO₂ emissions has been extensively studied in recent years, however little attention paid to the differences in urban forms. Previous studies implicitly assume that the urban form is homogenous across different urban areas. Such an assumption is questionable as urban form can have many different facets. This paper investigates the effects of urbanization on the road transport energy use by considering different urban forms from a dataset of 386 Norwegian municipalities from 2006 to 2009. Using the Stochastic Impacts by Regression on Population, Affluence, and Technology (STIRPAT) model with an energy use identity equation, the main findings (1) confirm the well-established result that urban density has a negative and significant influence on road transport energy use, and (2) demonstrate that the effect of urbanization partly depends on the level of urban density. These results imply that additional increases in urbanization in dense areas yield greater decreases in road transport energy use per capita. Additional findings posit that (3) there is a non-linear (quadratic) relationship between road energy use per capita and urban population. This implies that an increase in total municipality population over a specific turning point can result in a decrease in road energy use per capita. However, (4) the ratio of urban residential buildings with private gardens has a negative and significant influence on road transport energy use. This implies that there may be a trade-off between compact and sprawl city development strategies, highlighting that sustainable energy use requires further investigation.     

Sensitivity analysis on stochastic equilibrium transportation networks using genetic algorithm

This study deals with the sensitivity analysis of an equilibrium transportation networks using genetic algorithm approach and uses the bi‐level iterative sensitivity algorithm. Therefore, integrated Genetic Algorithm‐TRANSYT and Path Flow Estimator (GATPFE) is developed for signalized road networks for various level of perceived travel time in order to test the sensitivity of perceived travel time error in an urban stochastic road networks. Level of information provided to drivers correspondingly affects the signal timing parameters and hence the Stochastic User Equilibrium (SUE) link flows. When the information on road system is increased, the road users try to avoid conflicting links. Therefore, the stochastic equilibrium assignment concept tends to be user equilibrium. The GATPFE is used to solve the bi‐level problem, where the Area Traffic Control (ATC) is the upper‐level and the SUE assignment is the lower‐level. The GATPFE is tested for six‐junction network taken from literature. The results show that the integrated GATPFE can be applied to carry out sensitivity analysis at the equilibrium network design problems for various level of information and it simultaneously optimize the signal timings (i.e. network common cycle time, signal stage and offsets between junctions).     

Impacts,management and functional planning criterion of forest road network system in Turkey

In this study are proposed impacts, management and functional planning criterion of forest road network system in rural and urban landscapes of Turkey. Road spacing and road density have been inspected concerning forest roads in production, reforestation, national parks and protection forests of rural and urban landscapes of Turkey. The forest road network was the most expensive human activity in the forests both in terms of economics and environmental effects. Public opinion about the environment has increased in recent years. Sustainable land use planning creates a great challenge for rural and urban road network planning. Further improvements of the network are necessary, to provide for people’s needs in the near future. Harmful effects of road network conflict with the principles of sustainability. When making use of the forest ecosystem for various purposes, care must be taken not to spoil the forest structure. To achieve this, forests must be used according to forestry techniques. So, there is a need for a new planning approach, serving the interests of both accessibility and sustainable environment. In rural landscapes, forest road planning standards (slope, width, pavement, drainage etc.) are different in production, forestation, national parks and protection forests. The need for total forest roads in Turkey was 201,810 km, and that 133,693 km portion of which, corresponding to 66.25%, was constructed by the end of 2005. With a view to be capable of conducting modern forestry activities, our country’s forests should be provided with a systematic road network by completing as soon as possible the construction of the remaining portion of such roads.     

基于分布式计算机的智能相机在城市交通中的研究与应用

我国逐步开始将城市建设与互联网技术进行高度融合以打造智能城市。智能城市建设过程中,智能交通是重要一环,当前我国交通视频监控系统普遍是通过道路两旁的摄像头拍摄获得路况图像信息,这种方式虽然是解决了一些问题,但是不能满足智能城市的建设需求。本文总结和研究了分布式智能相机的一些关键技术,得出嵌入式设备高效率、低耗能的优点使其在交通监控领域得到了越来越广泛的应用,基于分布式计算机设计了智能相机的分布式智能城市交通系统,提出了一系列有益于提升系统运行的具有应用前景的算法,用来解决使用重叠视野进行跟踪和稀疏相机网络中的有效跟踪。     

Distinguishing the land use effects of road pricing based on the urban form attributes

This paper studies the effects of road pricing on land use under different development scenarios (business as usual scenario and transit oriented development scenario) by a quantitative method, which combines the integrated land use and transport interaction model (TRANUS model) with the scenario-planning techniques. Moreover, in order to further analyze the differences of the land use effects of road pricing on traffic analysis zones (TAZs) with different urban form attributes, a quantitative classification method combining factor analysis and cluster analysis is then used to quantitatively classify TAZs. The results demonstrate that the effects of road pricing on the land use of a specific region depend on the urban form attributes of the region. The higher the densities of employments and population, and better street design (high densities of street and intersections) and public transportation condition, the less the region is negatively affected by road pricing, and vice versa. More importantly, rail transit can alleviate the negative impact of road pricing on commercial development and population concentration of the region. Therefore, before introducing a road pricing policy, it is necessary to develop public transport system, especially rail transit.     

Construction of traffic state vector using mutual information for short-term traffic flow prediction

Short-term traffic flow prediction is an integral part in most of Intelligent Transportation Systems (ITS) research and applications. Many researchers have already developed various methods that predict the future traffic condition from the historical database. Nevertheless, there has not been sufficient effort made to study how to identify and utilize the different factors that affect the traffic flow. In order to improve the performance of short-term traffic flow prediction, it is necessary to consider sufficient information related to the road section to be predicted. In this paper, we propose a method of constructing traffic state vectors by using mutual information (MI). First, the variables with different time delays are generated from the historical traffic time series, and the spatio-temporal correlations between the road sections in urban road network are evaluated by the MI. Then, the variables with the highest correlation related to the target traffic flow are selected by using a greedy search algorithm to construct the traffic state vector. The K-Nearest Neighbor (KNN) model is adapted for the application of the proposed state vector. Experimental results on real-world traffic data show that the proposed method of constructing traffic state vector provides good prediction accuracy in short-term traffic prediction.     

Implementation of cordon pricing on urban network with practical approach

The road pricing is regarded as a transport policy to realize the efficient use of urban network. The network analysis with variable demand has been often applied to describe the network level of congestion pricing on the urban network. In the study, the cordon pricing system is analyzed to implement in the urban area with practical approach. It is assumed that the congestion tolls are collected in crossing the cordon lines on the network. Therefore, the scale of cordon zones and the values of congestion tolls would be determined simultaneously to produce the maximum social net benefit. The combinatorial optimization with unit price is formulated. The genetic algorithm (GA) is applied as a practical method to provide the solutions for the combinatorial optimization problem. As the pattern of cordon pricing is determined, the performance of system is estimated to confirm the applicability. It is concluded that the cordon pricing can be applied with the practical approach.     

A dynamic traffic assignment model for a continuum transportation system

A predictive continuum dynamic user-optimal (PDUO-C) model is formulated in this study to investigate the dynamic characteristics of traffic flow and the corresponding route-choice behavior of travelers within a region with a dense urban road network. The modeled region is arbitrary in shape with a single central business district (CBD) and travelers continuously distributed over the region. Within this region, the road network is represented as a continuum and travelers patronize a two-dimensional continuum transportation system to travel to the CBD. The PDUO-C model is solved by a promising solution algorithm that includes elements of the finite volume method (FVM), the finite element method (FEM), and the explicit total variation diminishing Runge-Kutta (TVD-RK) time-stepping method. A numerical example is given to demonstrate the utility of the proposed model and the effectiveness of the solution algorithm in solving this PDUO-C problem.