共查询到19条相似文献,搜索用时 156 毫秒
1.
微型客车车内噪声试验研究 总被引:2,自引:0,他引:2
系统研究某微型客车因发动机、传动系振动及路面不平度激励引起的车内噪声的控制问题,通过试验分析,识别了主要声源,研究了车内声传递特性,确定了对车内噪声有较大贡献的车身板件,为进一步改善该车的声学特性而进行优化设计提供了基础。 相似文献
2.
3.
4.
5.
介绍车内噪声源识别的主要方法,针对国内某型车在研发过程中的车内噪声问题展开研究,试验分析与主观评价相结合,综合运用主观评价、频谱分析和运转消去法,确定涡轮增压器冷却水泵电机振动是车内噪声问题的噪声源。分析引起车内噪声问题的原因,提出对涡轮增压器冷却水泵电机振动隔离采用二级隔振的改进方案,并且通过试验和主观评价验证改进方案的有效性。 相似文献
6.
7.
8.
9.
纯电动汽车空调压缩机制冷和制热需要不仅包含车内需求,还需冷却或加热电池,压缩机负载增大。汽油车压缩机的转速和发动机有固定速比,常用转速840~3600rpm,电动车压缩机转速由负载决定,通常为800~8000rpm。纯电动车没有发动机屏蔽,怠速压缩机噪声变得特别显著。需优化压缩机支架模态和压缩机刚体模态与车内空腔模态的避频、方向盘模态避频等,来解决车内噪声和振动问题。 相似文献
10.
11.
12.
13.
介绍了ODS方法的基本原理,该方法可用来识别结构运行状态下的动态特性。应用该方法对一辆发动机怠速运转状态下的微型车车身动态特性进行分析,识别出车身在发动机怠速动转状态下的振动型态,判明车内噪声产生的原因,为结构的改进提供了可靠的依据。 相似文献
14.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(2-3):185-198
In an attempt to reduce idling vibration and booming noise in automobile engines, the authors have developed an engine mounting system we call the ACM(Active Control engine Mount) system. Comprising a pair of electromagnetic actuators and hydraulic mounts, the system incorporates an adaptive control strategy based on the synchronized filtered-X LMS (SFX) algorithm. The crank angle pulse signal is detected as the synchronization signal and the force transmitted to the car body through the engine mounts is detected as a residual signal. Application of the ACM system to a vehicle with a transversally mounted four-cylinder engine resulted in significantly reduced idling vibration and booming noise. 相似文献
15.
Development of an Active Control Engine Mount System 总被引:3,自引:0,他引:3
Yoshiharu Nakaji Shigeki Satoh Takeshi Kimura Tsutomu Hamabe Yousuke Akatsu Hiroshi Kawazoe 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》1999,32(2):185-198
In an attempt to reduce idling vibration and booming noise in automobile engines, the authors have developed an engine mounting system we call the ACM(Active Control engine Mount) system. Comprising a pair of electromagnetic actuators and hydraulic mounts, the system incorporates an adaptive control strategy based on the synchronized filtered-X LMS (SFX) algorithm. The crank angle pulse signal is detected as the synchronization signal and the force transmitted to the car body through the engine mounts is detected as a residual signal. Application of the ACM system to a vehicle with a transversally mounted four-cylinder engine resulted in significantly reduced idling vibration and booming noise. 相似文献
16.
17.
随着生活水平的提高,消费者对汽车的舒适性要求越来越高。汽车空调控制器是整车空调系统的重要组成部分之一,也是汽车车内重要的内饰组成部分。汽车空调控制器不仅能够控制整车空调系统的工作,还有提升座舱美观的作用,对提高整车的驾乘舒适性起到非常重要的作用。汽车空调控制器一般由电路板(PCBA)、后壳、面板组成。在面板的制作工艺中有常规的注塑喷漆工艺,也有目前流行的模内注塑工艺(IMD),本文主要对模内注塑工艺导致的后期空调控制器面板起泡问题进行分析。 相似文献
18.
19.
Prediction of interior noise by excitation force of the powertrain based on hybrid transfer path analysis 总被引:1,自引:0,他引:1
In the early design stage of a vehicle, simulation of interior noise is useful for assessment and enhancement of the noise,
vibration and harshness (NVH) performance. Traditional transfer path analysis (TPA) technology cannot simulate interior noise
since it uses an experimental method. In order to solve this problem, hybrid TPA is employed in this paper. Hybrid TPA uses
simulated excitation force as the input force, which excites the flexible body of a car at the mount points, while traditional
TPA uses the measured force. This simulated force is obtained by numerical analysis of the finite element (FE) model of a
powertrain. Interior noise is predicted by multiplying the simulated force by the vibro-acoustic transfer function (VATF)
of the vehicle. The VATF is the acoustic response in the compartment of a car to the input force at the mount point of the
powertrain in the flexible car body. The trend of the predicted interior noise based on the hybrid TPA corresponds very well
to the measured interior noise, with some difference due to not only experimental error and simulation error, but also the
effect of the airborne path. 相似文献