共查询到17条相似文献,搜索用时 125 毫秒
1.
2.
3.
4.
汽车除霜系统性能CFD分析与试验 总被引:1,自引:0,他引:1
依据CAD数据和其他分析所需数据,进行了3个阶段的CFD除霜性能分析,除霜风道分析、稳态流场分析和瞬态除霜分析.依据布置和接口来设计风道,掌控各个出风口的流量分配.通过稳态计算来预测汽车空调的除霜性能并进行了验算.用瞬态模拟获得前挡风玻璃上随时间变化的除霜效果表明,除霜面积和形状与试验结果相符,试验除霜速度稍快于CFD... 相似文献
5.
随着我国汽车安全法规的完善,国家对汽车风窗玻璃除霜系统的性能要求及试验方法做了严格规定。运用Fluent软件,采用k-ε的RNG数学模型对某轻型客车前除霜系统进行了流场和温度场的模拟,找出了除霜风道设计上的不足,给出了相关的改进建议。改进后的除霜性能高于相关的国家标准,虚拟分析结果与实际环模试验结果比较吻合,该分析方法的应用有效地缩短了空调系统的设计开发周期. 相似文献
6.
汽车空调的除霜性能对汽车的安全性至关重要。文章研究了一个改型项目中空调侧除霜风口布置下的除霜效果,对空调除霜性能进行CFD分析,完成三维网格模型的建立,根据实际边界条件进行模拟分析,计算得出除霜风口的出口风量、玻璃表面的气流速度及温度分布等参数,验证除霜风口布置与出风量分配的合理性,并以此为基础提出了改进方案。 相似文献
7.
8.
为改善汽车的除霜性能,文章应用STARCCM+软件对汽车除霜风道进行了数值模拟计算,在稳态流场计算的基础上找出了当前风道存在主管两侧壁与水平面夹角大、出口有直角涡流区及格栅角度未起到分风作用3个问题.针对上述问题对风道进行逐步优化,得到前风挡气流分布均匀的风道模型.在全部计算域进行除霜瞬态计算,得到不同方案的最终除霜效果.计算结果表明,最优方案较原方案除霜率提高了6.27%. 相似文献
9.
车辆的除霜性能是整车开发过程及整车性能试验的一项重要指标。在设计开发阶段的除霜分析主要通过ANSA&Fluent软件进行模拟分析,整车阶段主要通过环境仓进行试验验证。文章针对环境仓试验车辆除霜不合格问题,应用ANSA&Fluent软件进行计算流体动力学(CFD)模拟分析,根据分析结果运用CATIA软件对空调风道进行优化修改,针对修改后的数据再次进行CFD模拟分析,分析合格之后再进行整车环境仓试验验证分析结果,如此形成一个完整的分析-验证闭环流程。风道开发过程中通过ANSA&Fluent软件进行CFD模拟分析可以有效避免后期整车试验阶段的除霜问题,避免问题整改的人力、时间、费用的浪费。 相似文献
10.
11.
12.
13.
14.
15.
16.
17.
Y. Kim S. Choi J. Lee W. Yoo J. Sohn 《International Journal of Automotive Technology》2011,12(4):521-527
In this study, a large bus is tested to measure its dynamic response by the single-lane change test and the rapid stop test.
A full car model is established by ADAMS/Car for computer simulation. For multibody modeling of a large bus, user-defined
templates are used in the simulation. Simulation results of the single-lane change test and the rapid braking test are compared
to the results of the physical experiments, in which several sensors are installed to measure the vehicle’s responses. The
results obtained from the simulation show good agreement with the tests’ results. A dynamic model for the MR(magnetic-rheological)
damper is also developed by employing the Magic Formula model, which is widely used in the nonlinear modeling of a tire. Bump
simulation of a full car with the MR damper is carried out to verify the performance of the MR damper. The comparison of the
simulation results obtained with the MR damper model to the results obtained with the traditional passive damper model showed
improved response of the vehicle with the MR damper. 相似文献