共查询到20条相似文献,搜索用时 359 毫秒
1.
2.
结合上海集装箱码头的有限公司(SCT)张兵浜、军工路码头改造工程,针对集装箱码头通过能力、堆场通过能力与出入口车道数的计算,对香港茂盛公司提出的有关公式,算例进行探讨,同时还介绍香港葵涌化柜码头及其出入口概况。 相似文献
3.
4.
闸口是自动化集装箱码头的重要组成部分,直接影响码头的整体服务水平,是连接港内外交通运输的咽喉要塞。针对钦州港自动化集装箱码头陆路运输比例高达60%、交通组织复杂及可供闸口布置的场地受限等技术难点,经过大量的调研分析,提出分离式闸口共享停车缓冲区设计理念。并对闸口的工艺流程、设计原则、功能设置及平面布置等进行总结,有效实现进出港闸口人工相关业务的一站式解决,为自动化集装箱码头闸口的布置提供一种新思路。 相似文献
5.
6.
通过山东某集装箱码头港口规划的一个实际仿真项目,分析了应用离散事件仿真方法辅助集装箱堆场大门系统规划的过程和方法.结果表明仿真方法能够较简单公式方法给出更加丰富的大门规划支持信息,从而有助于做出更加规范合理的大门规划决策. 相似文献
7.
<正>采用自动化轨道吊内跨式单侧双车道作业工艺的集装箱码头堆场在生产组织和安全风险防控方面不仅有别于传统的集装箱码头堆场,而且有别于垂直岸线布置的自动化集装箱码头堆场。本文比较自动化轨道吊内跨式单侧双车道作业工艺与双侧单车道作业工艺的优缺点,并以天津五洲国际集装箱码头(以下简称"五洲国际码头")为例,针对自动化轨道吊内跨式单侧双车道作业工艺的主要安全风险,从技术和管理等角度提出相应的防控措施。 相似文献
8.
针对自动化集装箱码头锁站布置方式及分配策略,在分析解挂锁作业流程及工艺特点的基础上,提出一种集中式锁站动态布置方法,实现锁站与岸桥作业区的空间隔离;考虑前后缓冲区的设置,提出3级缓冲区管理策略,介绍缓冲区布局形式及相应功能;针对装船挂锁及卸船解锁的作业工艺流程,提出相应锁站动态分配策略,根据锁站及缓冲区作业状态将锁站动态分配给运输车辆。与现有锁站分配及管理方法相比,该策略能够均衡各锁站及缓冲区负载,提高自动化码头装卸船作业效率,为自动化集装箱码头锁站分配及管理提供参考。 相似文献
9.
针对自动化集装箱码头交通流拥堵的问题,结合天津港北疆港区C段智能化集装箱码头工程建设项目,基于顺岸式边装卸布置形式,提出一种自动化码头ART(artificial intelligence robot of transportation,即人工智能运输机器人)的动态泊车设计。该设计方案通过停车区设置模块、停车优先级设置模块、停车数量及规则设置模块和多场景停车规则管控模块实现停车区相关设置,并通过动态泊车策略控制ART完成停车任务。研究表明,动态泊车设计方案具备较完善的泊车控制流程,可为自动化码头改善ART交通流提供参考。 相似文献
10.
11.
ABSTRACTTo improve the security and efficiency of terminal operations, a key issue for land area layout at a foreign trade container terminal is to plan and design an inspection area. Since it directly affects terminal traffic, while determining inspection area site selection, we should pay a great attention to operations and management of terminal traffic as well as container inspection. This paper employs a system decomposition technique to develop an integrated simulation framework, which enables us to flexibly obtain the whole picture of terminal traffic conditions and evaluate traffic impacts of inspection area site selection. A real-world terminal with typical patterns of land area layout is chosen to carry out a case study, which shows that traffic flow is unevenly distributed on the terminal road network and that the distribution is influenced by truck streams at the terminal. New findings also include: (1) traffic volume at the terminal apron is rather unbalanced in association with the non-continuous utilization of berths; (2) a proper inspection area should be located near the gate if the terminal conditions permit from the perspective of terminal traffic. This work may provide a decision-making reference for the planning and construction of foreign trade container terminals. 相似文献
12.
采用车道边论证方法进行吴淞口邮轮码头的交通组织设计,对极端工况下的车流量进行了定量分析,得出引桥交通量及码头面上的车位布置数等重要交通组织参数。并通过仿真方法证明交通组织方案的合理、有效,与理论计算互为补充。 相似文献
13.
为验证阿布扎比哈里发港集装箱码头二期项目工程工艺系统设计的合理性,利用面向对象建模的eM-Plant仿真软件对该项目设计方案下的码头整体作业、水平运输、箱区极限装卸和闸口通过能力4个方面进行仿真评估。结果表明工艺系统各环节布置基本合理。对设备调度和交通管理等给出操作建议,为营运方有针对性地进行生产管理和实现港区装卸系统高效运行提供指导。 相似文献
14.
全自动化集装箱码头具有高效、绿色、安全等突出优势。采用与自动化工艺系统相适应的交通组织尤为重要,以达到充分挖掘道路潜力、有效减少交通参与者的时间延误、提高路网通行能力的目的。结合洋山四期全自动化集装箱码头建设案例,采用高速公路立交设计方法,引进城市道路单向交通理念,对港外、港内道路进行路线方案设计并分配交通量,采用VISSIM仿真软件进行交通仿真模拟。研究结论如下:港区进出港闸口分开布设,港内主干道采用单向交通,港外道路节点立交并布设港外辅道。 相似文献
15.
16.
Yavuz Keceli 《Maritime Policy and Management》2013,40(8):945-958
ABSTRACTA multi-purpose cargo terminal in a seaport contains necessary infrastructure to handle different types of cargo, such as container, dry bulk, general bulk, and Ro-Ro. Since such terminals generally have dedicated areas and equipment for different types of cargo, berth, and yard operations for each type of cargo can be considered separate. On the other hand, trucks that carry all types of cargo use the same gate structure to enter and leave the terminal. Therefore, a method to superimpose the traffic that is caused by different types of cargo is needed for the planning of gate investments and operations. Consequently, this paper has developed a simulation model for a multi-purpose terminal to estimate the gate traffic and determine the necessary gate infrastructure, so that it can be used as a decision support tool for terminal planners and operational managers. 相似文献
17.
18.
19.