Transient switching control strategy from regenerative braking to anti-lock braking with a semi-brake-by-wire system

Regenerative braking is an important technology in improving fuel economy of an electric vehicle (EV). However, additional motor braking will change the dynamic characteristics of the vehicle, leading to braking instability, especially when the anti-lock braking system (ABS) is triggered. In this paper, a novel semi-brake-by-wire system, without the use of a pedal simulator and fail-safe device, is proposed. In order to compensate for the hysteretic characteristics of the designed brake system while ensure braking reliability and fuel economy when the ABS is triggered, a novel switching compensation control strategy using sliding mode control is brought forward. The proposed strategy converts the complex coupling braking process into independent control of hydraulic braking and regenerative braking, through which a balance between braking performance, braking reliability, braking safety and fuel economy is achieved. Simulation results show that the proposed strategy is effective and adaptable in different road conditions while the large wheel slip rate is triggered during a regenerative braking course. The research provides a new possibility of low-cost equipment and better control performance for the regenerative braking in the EV and the hybrid EV.     

Analysis of a regenerative braking system for Hybrid Electric Vehicles using an Electro-Mechanical Brake

The regenerative braking system of the Hybrid Electric Vehicle (HEV) is a key technology that can improve fuel efficiency by 20∼50%, depending on motor size. In the regenerative braking system, the electronically controlled brake subsystem that directs the braking forces into four wheels independently is indispensable. This technology is currently found in the Electronic Stability Program (ESP) and in Vehicle Dynamic Control (VDC). As braking technologies progress toward brake-by-wire systems, the development of Electro-Mechanical Brake (EMB) systems will be very important in the improvement of both fuel consumption and vehicle safety. This paper investigates the modeling and simulation of EMB systems for HEVs. The HEV powertrain was modeled to include the internal combustion engine, electric motor, battery and transmission. The performance simulation for the regenerative braking system of the HEV was performed using MATLAB/Simulink. The control performance of the EMB system was evaluated via the simulation of the regenerative braking of the HEV during various driving conditions.     

Combined emergency braking and turning of articulated heavy vehicles

‘Slip control’ braking has been shown to reduce the emergency stopping distance of an experimental heavy goods vehicle by up to 19%, compared to conventional electronic/anti-lock braking systems (EBS). However, little regard has been given to the impact of slip control braking on the vehicle’s directional dynamics. This paper uses validated computer models to show that slip control could severely degrade directional performance during emergency braking. A modified slip control strategy, ‘attenuated slip demand’ (ASD) control, is proposed in order to rectify this. Results from simulations of vehicle performance are presented for combined braking and cornering manoeuvres with EBS and slip control braking with and without ASD control. The ASD controller enables slip control braking to provide directional performance comparable with conventional EBS while maintaining a substantial stopping distance advantage. The controller is easily tuned to work across a wide range of different operating conditions.     

CVT混合动力汽车再生制动控制策略与仿真分析

分析了混合动力汽车制动过程中发动机反拖制动和CVT速比控制对车辆再生制动性能的影响,提出了低制动强度下仅由电机再生制动、高制动强度下电机与制动器共同制动和紧急制动时发动机参与制动的再生制动策略。对典型工况进行了再生制动仿真,仿真结果表明,CVT速比控制可使电机运行在高效区,从而获得了比传统手动变速混合动力汽车更好的制动能量回收效果。     

Energy recovery based on pedal situation for regenerative braking system of electric vehicle

ABSTRACT

Energy recovery is a key technology to improve energy efficiency and extend driving range of electric vehicle. It is still a challenging issue to maximise energy recovery. We present an energy recovery mode (mode A) which recovers braking energy under all situations that accelerator pedal (AP) is lifted, brake pedal (BP) is depressed, as well as AP and BP are released completely; and propose a control strategy of regenerative braking based on driver's intention identified by a fuzzy recognition method. Other two modes: (1) recovery braking energy only the BP is depressed (mode B), (2) no energy recovery, have been studied to compare with mode A. Simulations are carried out on different adhesion conditions. Recovered energy and driving range are also obtained under FTP75 driving cycle. Road test is implemented to validate simulation results. Results show that mode A can improve energy recovery by almost 15.8% compared with mode B, and extend driving range by almost 8.81% compared with mode B and 20.39% with the mode of no energy recovery; the control strategy of regenerative braking can balance energy recovery and braking stability. The proposed energy recovery mode provides a possibility to achieve a single-pedal design of the electric vehicle.     

Torque control allocation based on constrained optimization with regenerative braking for electric vehicles

This paper proposes a constrained optimization-based torque control allocation method aimed to improve energy efficiency, and thus, driving range for electric vehicles. In the proposed method, the cost function is defined not only to achieve desired yaw moment for vehicle handling and stability, but also to minimize power losses for energy efficiency. The particular attention is paid to the power losses due to tire slips both longitudinally and laterally. The constraints are also set based on thorough investigation on various causes of power disppation such that the torque is allocated with restraint to use regenerative braking in its maximum capacity. The proposed control allocation method has been tested and verified to be effective on energy efficiency improvement through both simulation and experiment under various driving maneuvers.     

Extended-Kalman-filter-based regenerative and friction blended braking control for electric vehicle equipped with axle motor considering damping and elastic properties of electric powertrain

Because of the damping and elastic properties of an electrified powertrain, the regenerative brake of an electric vehicle (EV) is very different from a conventional friction brake with respect to the system dynamics. The flexibility of an electric drivetrain would have a negative effect on the blended brake control performance. In this study, models of the powertrain system of an electric car equipped with an axle motor are developed. Based on these models, the transfer characteristics of the motor torque in the driveline and its effect on blended braking control performance are analysed. To further enhance a vehicle's brake performance and energy efficiency, blended braking control algorithms with compensation for the powertrain flexibility are proposed using an extended Kalman filter. These algorithms are simulated under normal deceleration braking. The results show that the brake performance and blended braking control accuracy of the vehicle are significantly enhanced by the newly proposed algorithms.     

Development of a slip control anti-lock braking system model

This paper describes the initial phase of work carried out as part of an on going study investigating the interaction between the tyre, suspension system and an antilock braking system (ABS). The modelling, analysis simulations and integration of results have been performed using an industry standard Multibody Systems Analysis (MBS) program. A quarter vehicle model has been used together with an individual front suspension system represented by interconnected rigid bodies. The tyre model used can be integrated into vehicle handling simulations but only the theory associated with the generation of longitudinal braking forces is described here. An ABS model based on slip control has been used to formulate the braking forces described in this paper. The simulations, which have been performed braking on wet and dry road surfaces, compare the performance of two different tyres.     

An integrated control strategy for the composite braking system of an electric vehicle with independently driven axles

For an electric vehicle with independently driven axles, an integrated braking control strategy was proposed to coordinate the regenerative braking and the hydraulic braking. The integrated strategy includes three modes, namely the hybrid composite mode, the parallel composite mode and the pure hydraulic mode. For the hybrid composite mode and the parallel composite mode, the coefficients of distributing the braking force between the hydraulic braking and the two motors' regenerative braking were optimised offline, and the response surfaces related to the driving state parameters were established. Meanwhile, the six-sigma method was applied to deal with the uncertainty problems for reliability. Additionally, the pure hydraulic mode is activated to ensure the braking safety and stability when the predictive failure of the response surfaces occurs. Experimental results under given braking conditions showed that the braking requirements could be well met with high braking stability and energy regeneration rate, and the reliability of the braking strategy was guaranteed on general braking conditions.     

Improvement of drivability and fuel economy with a hybrid antiskid braking system in hybrid electric vehicles

When braking on wet roads, Antilock Braking System (ABS) control can be triggered because the available brake torque is not sufficient. When the ABS system is active, for a hybrid electric vehicle, the regenerative brake is switched off to safeguard the normal ABS function. When the ABS control is terminated, it would be favorable to reactivate the regenerative brake. However, recurring cycles from ABS to motor regenerative braking could occur. This condition is felt to be unpleasant by the driver and has adverse effects on driving stability. In this paper, a novel hybrid antiskid braking system using fuzzy logic is proposed for a hybrid electric vehicle that has a regenerative braking system operatively connected to an electric traction motor and a separate hydraulic braking system. This control strategy and the method for coordination between regenerative and hydraulic braking are developed. The motor regenerative braking controller is designed. Control of regenerative and hydraulic braking force distribution is investigated. The simulation and experimental results show that vehicle braking performance and fuel economy can be improved and the proposed control strategy and method are effective and robust.     

轻度混合动力汽车制动能量回收控制策略研究

以某轻度混合动力电动汽车为研究对象,分析了,制动能量回收系统在制动回收工作过程中的控制策略,并在分析的基础上建立其在制动过程中的制动力分配模型和数学模型,利用6个典型的循环工况来评价现有制动力分配策略的优劣,并与Advisor中的制动力分配策略进行了比较。无论是燃油经济性、整车能量效率、回收能量占燃油消耗的百分比,还是能量回收率都有明显的提高。     

Cooperative regenerative braking control for front-wheel-drive hybrid electric vehicle based on adaptive regenerative brake torque optimization using under-steer index

In this study, cooperative regenerative braking control of front-wheel-drive hybrid electric vehicle is proposed to recover optimal braking energy while guaranteeing the vehicle lateral stability. In front-wheel-drive hybrid electric vehicle, excessive regenerative braking for recuperation of the maximum braking energy can cause under-steer problem. This is due to the fact that the resultant lateral force on front tire saturates and starts to decrease. Therefore, cost function with constraints is newly defined to determine optimum distribution of brake torques including the regenerative brake torque for improving the braking energy recovery as well as the vehicle lateral stability. This cost function includes trade-off relation of two objectives. The physical meaning of first objective of cost function is to maximize the regenerative brake torque for improving the fuel economy and that of second objective is to increase the mechanical-friction brake torques at rear wheels rather than regenerative brake torque at front wheels for preventing front tire saturation. And weighting factor in cost function is also proposed as a function of under-steer index representing current state of the vehicle lateral motion in order to generalize the constrained optimization problem including both normal and severe cornering situation. For example, as the vehicle approaches its handling limits, adaptation of weighting factor is possible to prioritize front tire saturation over increasing the recuperation of braking energy for driver safety and vehicle lateral stability. Finally, computer simulation of closed loop driver-vehicle system based on Carsim? performed to verify the effectiveness of adaptation method in proposed controller and the vehicle performance of the proposed controller in comparison with the conventional controller for only considering the vehicle lateral stability. Simulation results indicate that the proposed controller improved the performance of braking energy recovery as well as guaranteed the vehicle lateral stability similar to the conventional controller.     

混合动力电动汽车控制策略的研究

主要讨论了并联式混合动力电动汽车的控制策略,详细阐述了控制策略的依据以及控制过程,并给出了控制策略的仿真结果。     

电动汽车再生制动控制算法研究

以"在满足车辆制动性能要求、保证车辆制动稳定性的前提下,最大限度地回收再生制动能量"为原则,对电动汽车再生制动力与制动器制动力的分配算法进行研究,得到车辆制动时制动力的控制算法,最后以某电动车辆为例进行仿真分析。制动力分配算法对车辆再生制动和机械制动的分配规律的制定具有较好的参考作用。     

基于模糊控制的车辆弯道防抱制动系统仿真分析

建立了8自由度的非线性汽车弯道行驶整车模型,在此模型基础上,采用模糊控制理论,分别对车速与轮速的变化、车轮载荷转移的变化以及制动器制动力矩的变化进行计算机仿真。仿真结果表明,采用模糊控制可以达到很好的制动控制效果。     

Modeling and model predictive control for hybrid electric vehicles

This paper builds up a typical model of a parallel hybrid electric vehicle and develops model predictive controllers for this model to control the speeds and torques for fast clutch engagement with high driving comfort and low jerk. Some modified algorithms for model predictive controllers are studied to improve their ability to track the desired speed setpoints, subject to input and output constraints.     

Regenerative braking strategies,vehicle safety and stability control systems: critical use-case proposals

The sustainable development of vehicle propulsion systems that have mainly focused on reduction of fuel consumption (i.e. CO₂ emission) has led, not only to the development of systems connected with combustion processes but also to legislation and testing procedures. In recent years, the low carbon policy has made hybrid vehicles and fully electric vehicles (H/EVs) popular. The main virtue of these propulsion systems is their ability to restore some of the expended energy from kinetic movement, e.g. the braking process. Consequently new research and testing methods for H/EVs are currently being developed. This especially concerns the critical ‘use-cases’ for functionality tests within dynamic events for both virtual simulations, as well as real-time road tests. The use-case for conventional vehicles for numerical simulations and road tests are well established. However, the wide variety of tests and their great number (close to a thousand) creates a need for selection, in the first place, and the creation of critical use-cases suitable for testing H/EVs in both virtual and real-world environments. It is known that a marginal improvement in the regenerative braking ratio can significantly improve the vehicle range and, therefore, the economic cost of its operation. In modern vehicles, vehicle dynamics control systems play the principal role in safety, comfort and economic operation. Unfortunately, however, the existing standard road test scenarios are insufficient for H/EVs. Sector knowledge suggests that there are currently no agreed tests scenarios to fully investigate the effects of brake blending between conventional and regenerative braking as well as the regenerative braking interaction with active driving safety systems (ADSS). The paper presents seven manoeuvres, which are considered to be suitable and highly informative for the development and examination of H/EVs with regenerative braking capability. The critical manoeuvres presented are considered to be appropriate for examination of the regenerative braking mode according to ADSS. The manoeuvres are also important for investigation of regenerative braking system properties/functionalities that are specified by the legal requirements concerning H/EVs braking systems. The last part of this paper shows simulation results for one of the proposed manoeuvres that explicitly shows the usefulness of the manoeuvre.     

某汽车气压制动系统制动反应时间的测试及分析

汽车制动反应时间是汽车制动系统的重要性能参数之一,是影响汽车制动距离的主要因素之一。本文对某汽车气压制动系统进行制动反应时间测试,并分析其制动系统特性。     

A control strategy for parallel hybrid electric vehicles based on extremum seeking

An energy management control strategy for a parallel hybrid electric vehicle based on the extremum-seeking method for splitting torque between the internal combustion engine and electric motor is proposed in this paper. The control strategy has two levels of operation: the upper and lower levels. The upper level decision-making controller chooses the vehicle operation mode such as the simultaneous use of the internal combustion engine and electric motor, use of only the electric motor, use of only the internal combustion engine, or regenerative braking. In the simultaneous use of the internal combustion engine and electric motor, the optimum energy distribution between these two sources of energy is determined via the extremum-seeking algorithm that searches for maximum drivetrain efficiency. A dynamic programming solution is also obtained and used to form a benchmark for performance evaluation of the proposed method based on extremum seeking. Detailed simulations using a realistic model are presented to illustrate the effectiveness of the methodology.     

Design of an energy management strategy for parallel hybrid electric vehicles using a logic threshold and instantaneous optimization method

A novel parallel hybrid electric vehicle (PHEV) configuration consisting of an extra one-way clutch and an automatic mechanical transmission (AMT) is taken as the study subject of this paper. An energy management strategy (EMS) combining a logic threshold approach and an instantaneous optimization algorithm is developed for the investigated PHEV. The objective of this EMS is to achieve acceptable vehicle performance and drivability requirements while simultaneously maximizing engine fuel economy and maintaining the battery state of charge (SOC) in its rational operation range at all times. Under the MATLAB/Simulink environment, a computer simulation model of the studied PHEV is established using the bench test results. Simulation results for the behavior of the engine, motor, and battery illustrate the potential of the proposed control strategy in terms of fuel economy and in keeping the deviations of SOC at a low level.