An assessment of the performance of the European long intermodal freight trains (LIFTS)

Intermodal rail/road freight transport has always been considered as a competitive alternative to its road freight counterpart in the European medium- to long-distance corridors (markets). Such consideration has been based on the increasing competitiveness of some innovative rail services and the existing and prospective performance of both modes in terms of the full social – internal or operational and external – costs. The most recent innovation of rail technologies and related services launched by some European railway companies, still at the conceptual level, is the Long Intermodal Freight Train (LIFT). This is supposed to be a block train operating in long-distance corridors (markets) with a substantial and regular freight demand.This paper develops analytical models for assessing the performance of the LIFTs, the already-operating Conventional Intermodal Freight Trains (CIFTs), and their road counterpart as well. The performance consists of the full – internal (private) and external – costs of the door-to-door delivery of loading units – containers, swap-bodies, and semi-trailers. The internal costs embrace the operational costs of the transport (rail and road) and intermodal terminal operators. The external costs include the costs of the impacts of door-to-door delivery of loading units on society and the environment. These negative externalities include noise, air pollution, traffic accidents, and congestion.The models are applied to a simplified version of intermodal and road transport system using inputs from the European freight transport sector. The aims are to compare the full costs of particular modalities in order to investigate the potential of the LIFTs as compared with the CIFTs in improving the internal efficiency of the rail freight sector and its competitiveness with respect to its road counterpart. In addition, the paper attempts to assess some effects on the potential modal shift of EU (European Union) transport policies on internalizing transport externalities.     

Empirical evidence on induced traffic

Disparate evidence indicates that the provision of extra road capacity results in a greater volume of traffic. The amount of extra traffic must be heavily dependent on the context, size and location of road schemes, but an appropriate average value is given by an elasticity of traffic volume with respect to travel time of about –0.5 in the short term, and up to –1.0 in the long term. As a result, an average road improvement has induced an additional 10% of base traffic in the short term and 20% in the long term: individual schemes with induced traffic at double this level may not be very unusual, especially for peak periods. Induced traffic is particularly seen on the alternative routes that road improvements are intended to relieve.     

Towards marginal cost pricing: A comparison of alternative pricing systems

European urban areas are marred by the problems of congestion and environmental degradation due to the prevailing levels of car use. Strong arguments have thus been put forward in support of a policy based on marginal cost pricing (European Commission 1996). Such policy measures – which would force private consumers to pay for a public service that was previously provided "for free" – are, however, notoriously unpopular with the general public and hence also with their elected representatives – the politicians. There is thus an obvious tension between economic theory, which suggests that marginal cost pricing is the welfare maximising solution to urban transport problems, and practical experience, which suggests that such pricing measures are unwanted by the affected population and hence hard to implement through democratic processes. The AFFORD Project for the European Commission has aimed to investigate this paradox and its possible solutions, through a combination of economic analysis, predictive modelling, attitudinal surveys, and an assessment of fiscal and financial measures within a number of case study cities in Europe. In this paper the methodology and results obtained for the Edinburgh case study are reported in detail. The study analyses alternative road pricing instruments and compares their performance against the theoretical first best situation. It discusses the effect of coverage, location, charging mechanism and interaction with other instruments. The paper shows that limited coverage in one mode may lead to a deviation from the user pays principle in other modes, that location is as important as charge levels and that assumptions about the use of revenues are critical in determining the effect on equity and acceptability. Finally the results show that a relatively simple smart card system can come close to providing the economic first best solution, but that this result should be viewed in the context of the model assumptions.     

Traffic signal timing problems with environmental and equity considerations

Traffic signal timings in a road network can not only affect total user travel time and total amount of traffic emissions in the network but also create an inequity problem in terms of the change in travel costs of users traveling between different locations. This paper proposes a multi‐objective bi‐level programming model for design of sustainable and equitable traffic signal timings for a congested signal‐controlled road network. The upper level of the proposed model is a multi‐objective programming problem with an equity constraint that maximizes the reserve capacity of the network and minimizes the total amount of traffic emissions. The lower level is a deterministic network user equilibrium problem that considers the vehicle delays at signalized intersections of the network. To solve the proposed model, an approach for normalizing incommensurable objective functions is presented, and a heuristic solution algorithm that combines a penalty function approach and a simulated annealing method is developed. Two numerical examples are presented to show the effects of reserve capacity improvement and green time proportion on network flow distribution and transportation system performance and the importance of incorporating environmental and equity objectives in the traffic signal timing problems. Copyright © 2013 John Wiley & Sons, Ltd.     

A review of the road safety strategy in hong kong

Since the mid-1990s, the effectiveness of road safety measures in Hong Kong has been weakening. Six administrations in Australia, California, Great Britain (GB), Japan, New Zealand and Sweden are selected to help review the road safety activities in Hong Kong. Nine main components of the road safety strategy, including vision, objectives, targets, action plan, evaluation and monitoring, research and development, quantitative modeling, institutional framework and funding are summarized from the road safety strategies of these overseas administrations and compared to that of Hong Kong. It is found that Hong Kong's road safety activities have to be restructured to make significant improvement. In the future, a new approach structured by the nine different road safety components is recommended. The lessons learnt can be generalized to smooth the progress of other administrations at the Intermediate Stage towards the Advanced Stage of road safety development by using the short-, medium- and long-term approaches.     

Performance indicators for transit management

Transit performance can be evaluated through quantitative indicators. As the provision of efficient and effective transit service are appropriate goals to be encouraged by federal and state governments, these goals are used to develop performance indicators.Three efficiency and four effectiveness indicators are described, together with two overall indicators. These nine indicators are analyzed for comparability utilizing operating and financial data collected from public transit agencies in California.Performance indicators selected for this study should not be viewed as final. Twenty-one performance indicators proposed by previous studies were reviewed. Theoretical considerations and unavailability or unreliability of data caused omission of several useful measures like passenger-miles. Circumstances such as improved data, emphasis upon goals other than efficiency and effectiveness, and local conditions might warrant the inclusion of indicators deleted from this research.This paper is based on work conducted for the Urban Mass Transportation Administration under University Research and Training Grant CA-11-0014, Development of Performance Indicators for Transit. The views expressed herein are those of the authors and not necessarily those of the University of California or the United States Government. We are indebted to John Feren for assistance with the statistical processing and data gathering.     

Spillback congestion in dynamic traffic assignment: A macroscopic flow model with time-varying bottlenecks

In this paper, we propose a new model for the within-day Dynamic Traffic Assignment (DTA) on road networks where the simulation of queue spillovers is explicitly addressed, and a user equilibrium is expressed as a fixed-point problem in terms of arc flow temporal profiles, i.e., in the infinite dimension space of time’s functions. The model integrates spillback congestion into an existing formulation of the DTA based on continuous-time variables and implicit path enumeration, which is capable of explicitly representing the formation and dispersion of vehicle queues on road links, but allows them to exceed the arc length. The propagation of congestion among adjacent arcs will be achieved through the introduction of time-varying exit and entry capacities that limit the inflow on downstream arcs in such a way that their storage capacities are never exceeded. Determining the temporal profile of these capacity constraints requires solving a system of spatially non-separable macroscopic flow models on the supply side of the DTA based on the theory of kinematic waves, which describe the dynamic of the spillback phenomenon and yield consistent network performances for given arc flows. We also devise a numerical solution algorithm of the proposed continuous-time formulation allowing for “long time intervals” of several minutes, and give an empirical evidence of its convergence. Finally, we carry out a thorough experimentation in order to estimate the relevance of spillback modeling in the context of the DTA, compare the proposed model in terms of effectiveness with the Cell Transmission Model, and assess the efficiency of the proposed algorithm and its applicability to real instances with large networks.     

Algorithms for logit-based stochastic user equilibrium assignment

The paper proposes an efficient algorithm for determining the stochastic user equilibrium solution for logit-based loading. The commonly used Method of Successive Averages typically has a very slow convergence rate. The new algorithm described here uses Williams’ result [ Williams, (1977) On the formation of travel demand models and economic evaluation measures of user benefit. Environment and Planning 9A(3), 285–344] which enables the expected value of the perceived travel costs S_rs to be readily calculated for any flow vector x. This enables the value of the Sheffi and Powell, 1982 objective function [Sheffi, Y. and Powell, W. B. (1982) An algorithm for the equilibrium assignment problem with random link times. Networks 12(2), 191–207], and its gradient in any specified search direction, to be calculated. It is then shown how, at each iteration, an optimal step length along the search direction can be easily estimated, rather than using the pre-set step lengths, thus giving much faster convergence. The basic algorithm uses the standard search direction (towards the auxiliary solution). In addition the performance of two further versions of the algorithm are investigated, both of which use an optimal step length but alternative search directions, based on the Davidon–Fletcher–Powell function minimisation method. The first is an unconstrained and the second a constrained version. Comparisons are made of all three versions of the algorithm, using a number of test networks ranging from a simple three-link network to one with almost 3000 links. It is found that for all but the smallest network the version using the standard search direction gives the fastest rate of convergence. Extensions to allow for multiple user classes and elastic demand are also possible.     

On the convergence of the algorithm for bilevel programming problems by Clegg and Smith

In Clegg and Smith [Transportation Research B 35 (2001) 71–82] and Battye et al. [in: M. Patriksson, M. Labbe (Eds.), Transportation Planning – State of the Art, Proceedings of the 6th Meeting of the EURO Working Group on Transportation, Gothenburg, Sweden, September 9–11, 1998, Kluwer Academic Publishers, Dordrecht], Smith and colleagues present an algorithm for solving the bilevel programming problem. We show that the points reached by the algorithm are not stationary points of bilevel programs in general. We further show that, with a minor modification, this method can be expressed as an inexact penalty method for gap function-constrained bilevel programs.     

Classification of driver-assistance systems according to their impact on road safety and traffic efficiency

The aim was to examine driver-assistance systems that seem to have a considerable potential for road safety and traffic efficiency improvement, and to propose an impact-oriented classification of these systems. A broad overview of a series of driver-assistance systems under development or in some cases already available is presented and it identifies the basic characteristics of each system and its expected impact on traffic efficiency and road safety. The latter is assessed on the basis of appropriate evaluation criteria. Expert judgement and literature evidence available are used in this context. This impact approach, in contrast with the usually adopted user or system-oriented approaches, allows for more appropriate identification of the priorities in the field of future research, development and promotion of driver-assistance systems. The proposed classification allocates the driver-assistance systems in four different categories on the basis of whether traffic efficiency and safety impact are high or low. This categorization reveals that 40% of the systems considered are expected to have a high safety and low traffic-efficiency impact, while only 15% is expected to have both impacts high.     

Users of a regional telephone-based traveler information system – a study of TravInfo™ users in the San Francisco Bay Area

This paper reports the results of a 1998 survey carried out among a small sample of people who had called the TravInfo Travel Advisory Telephone System (TATS) in April 1997 looking for current information about traffic conditions in the San Francisco Bay Area. The survey employed a series of tradeoff questions designed to identify the specific attributes of the information that the respondents felt to be most important, and to estimate the relative values that these users had for various possible information improvements. Despite the small size of the sample, it proved feasible to investigate how the implicit valuations placed on each attribute of the service (update frequency, extent of road coverage, and level of customization) varied among different user segments. For the most part, respondents appeared to value basic enhancements – those that establish an initial quality differential above the baseline set by free broadcast traffic information – more than they value further subsequent improvements. Overall, more frequent information updates are the highest priority among the range of possible enhancements explored in the survey, followed by an extension of coverage to include major arterials in addition to freeways. However, the evidence suggests relatively little value in door-to-door coverage – that is, coverage of streets beyond the freeway and major arterial networks. This research produced some estimates of the average monetary values ("willingness to pay") that the sample of current users attached to information improvements of various kinds. While these values varied among subgroups in ways that fit a priori expectations, it is not clear whether they provide an unbiased picture of the users' absolute levels of willingness to pay, such that they could be used reliably to inform (for example) information pricing decisions. The value of this research lies more clearly in the light it sheds on the relative structure of user preferences, and on the variations in preferences between information attributes and market segments. Overall, the authors conclude that the prospects for self-sustaining ATIS services are unclear. In response to a direct question, a majority of users (perhaps influenced by a strategic bias) indicated that they were unwilling to pay for ATIS services; some of these same people, however, indicated later that they might indeed be willing to buy a particular enhanced ATIS package, in direct competition with free broadcast services.     

Preparing highway emissions inventories for urban scale modeling: A case study in Philadelphia

Highway emissions represent a major source of many pollutants. Use of local data to model these emissions can have a large impact on the magnitude and distribution of emissions predicted and can significantly improve the accuracy of local scale air quality modeling assessments. This paper provides a comparison of top–down and bottom–up approaches for developing emission inventories for modeling in one urban area, Philadelphia, in calendar year 1999. A bottom–up approach relies on combining motor vehicle emission factors and vehicle activity data from a travel demand model estimated at the road link level to generate hourly emissions data. This approach can result in better estimates of levels and spatial distribution of on-road motor vehicle emissions than a top–down approach that relies on more aggregated information and default modeling inputs.     

An ontology-based framework to support performance monitoring in public transport systems

Managers of public transport systems have been facing for years the strategic challenge of maintaining high quality of transport services to improve the mobility of citizens, while reducing costs and ensuring safety and low environmental impact. A well-established way to evaluate the performance achieved by the system or by specific activities is to monitor Key Performance Indicators (KPI). However, existing management systems, which refer to flexible yet large and complex data models, provide a limited support to define and select relevant KPIs for the objectives at hand, and even the identification of whether and how the data model is capable to achieve a certain informative need is a critical and time-consuming task. This work is aimed to propose a framework to ease the development of a monitoring system in the public transport domain. The approach is based on the ontological representation of all the knowledge regarding indicators and their formulas, business objectives, dimension analysis and their relation with the Transmodel, the European reference data model for public transport information systems. On its top, a reasoning framework provides logic functionalities to interactively support designers in a set of common design tasks: the choice of the most suitable indicators for the performance monitoring needs at hand, the definition of new indicators and the identification of the minimal set of Transmodel modules needed to calculate them. A case study is included to discuss these applications, while an evaluation shows the feasibility of the approach.     

Development and evaluation of a hybrid travel time forecasting model

The purpose of this paper is to develop and evaluate a hybrid travel time forecasting model with geographic information systems (GIS) technologies for predicting link travel times in congested road networks. In a separate study by You and Kim (cf. You, J., Kim, T.J., 1999b. In: Proceedings of the Third Bi-Annual Conference of the Eastern Asia Society for Transportation Studies, 14–17 September, Taipei, Taiwan), a non-parametric regression model has been developed as a core forecasting algorithm to reduce computation time and increase forecasting accuracy. Using the core forecasting algorithm, a prototype hybrid forecasting model has been developed and tested by deploying GIS technologies in the following areas: (1) storing, retrieving, and displaying traffic data to assist in the forecasting procedures, (2) building road network data, and (3) integrating historical databases and road network data. This study shows that adopting GIS technologies in link travel time forecasting is efficient for achieving two goals: (1) reducing computational delay and (2) increasing forecasting accuracy.     

Road Safety Strategies: A Comparative Framework and Case Studies

Abstract

This paper proposes a nine‐component analytical framework for developing, comparing, and evaluating road safety strategies. The nine components are: (1) vision; (2) objectives; (3) targets; (4) action plan; (5) evaluation and monitoring; (6) research and development; (7) quantitative modelling; (8) institutional framework; and (9) funding. While the first four components are essential for the formulation of a road safety strategy, the remaining components are key to its successful implementation. To demonstrate the usefulness of this comparative framework, we examine the road safety strategies of six selected administrations: Australia, California, Great Britain, Japan, New Zealand, and Sweden. In these case studies, we extract and highlight good practices in the formulation and implementation of their road safety strategies. The proposed framework also provides a systematic approach for assessing road safety strategies in other administrations. The evaluation of the six case studies forms a benchmarking platform for the planning, formulation, and implementation of good practices for road safety strategies.     

The demand curve under road pricing and the problem of political feasibility: A comment

This paper contains a comment on an article by Professor Lave, recently published in this journal (Transpn Res. 28A, 83–91, 1994). Lave's approach towards analyzing the political feasibility of road pricing is challenged on several grounds. In a simple setting, where individual road users are identical in terms of private cost of driving and valuation of time, Lave's approach is seen to be, although less clear, in essence equivalent to the traditional textbook analysis. In a more complex setting, where differences across individuals are allowed for, his approach is seen to suffer from lacking recognition of differences in individual marginal utilities of income.     

Morning commute in a single-entry traffic corridor with no late arrivals

This paper analyzes a model of early morning traffic congestion, that is a special case of the model considered in Newell (1988). A fixed number of identical vehicles travel along a single-lane road of constant width from a common origin to a common destination, with LWR flow congestion and Greenshields’ Relation. Vehicles have a common work start time, late arrivals are not permitted, and trip cost is linear in travel time and time early. The paper explores traffic dynamics for the social optimum, in which total trip cost is minimized, and for the user optimum, in which no vehicle’s trip cost can be reduced by altering its departure time. Closed-form solutions for the social optimum and quasi-analytic solutions for the user optimum are presented, along with numerical examples, and it is shown that this model includes the bottleneck model (with no late arrivals) as a limit case where the length of the road shrinks to zero.     

Distance and time in intermodal goods transport networks in Europe: A generic approach

This paper is about distance and time as factors of competitiveness of intermodal transport. It reviews the relevance of the factors, evaluates time models in practice, compares network distances and times in alternative bundling networks with geometrically varied layouts, and points out how these networks perform in terms of vehicle scale, frequency and door-to-door time. The analysis focuses on intermodal transport in Europe, especially intermodal rail transport, but is in search for generic conclusions. The paper does not incorporate the distance and time results in cost models, and draws conclusions for transport innovation, wherever this is possible without cost modelling. For instance, the feature vehicle scale, an important factor of transport costs, is analysed and discussed.Distance and time are important factors of competitiveness of intermodal transport. They generate (direct) vehicle costs and – via transport quality – indirect costs to the customers. Clearly direct costs/prices are the most important performance of the intermodal transport system. The relevance of quality performances is less clarified. Customers emphasise the importance of a good match between the transport and the logistic system. In this framework (time) reliability is valued high. Often transport time, arrival and departure times, and frequency have a lower priority. But such conclusions can hardy be generalised. The range of valuations reflects the heterogeneity of situations. Some lack of clarity is obviously due to overlapping definitions of different performance types.The following parts of the paper are about two central fields of network design, which have a large impact on transport costs and quality, namely the design of vehicle roundtrips (and acceleration of transport speed) and the choice of bundling type: do vehicles provide direct services or run in what we call complex bundling networks? An example is the hub-and-spoke network. The objective of complex bundling is to increase vehicle scale and/or transport frequency even if network volumes are restricted. Complex bundling requires intermediate nodes for the exchange of load units. Examples of complex bundling networks are the hub-and-spoke network or the line network.Roundtrip and bundling design are interrelated policy fields: an acceleration of the roundtrip speed, often desirable from the cost point of view, can often only be carried out customer friendly, if the transport frequency is increased. But often the flow size is not sufficient for a higher frequency. Then a change of bundling model can be an outcome.Complex bundling networks are known to have longer average distances and times, the latter also due to the presence of additional intermediate exchange nodes. However, this disadvantage is – inside the limits of maximal vehicle sizes – overruled by the advantage of a restricted number of network links. Therefore generally, complex bundling networks have shorter total vehicle distances and times. This expression of economies of scale implies lower vehicle costs per load unit.The last part of the paper presents door-to-door times of load units of complex bundling networks and compares them with unimodal road transport. The times of complex bundling networks are larger than that of networks with direct connections, but nevertheless competitive with unimodal road transport, except for short distances.     

A chance-constrained based stochastic dynamic traffic assignment model: Analysis, formulation and solution algorithms

This paper is concerned with the system optimum-dynamic traffic assignment (SO-DTA) problem when the time-dependent demands are random variables with known probability distributions. The model is a stochastic extension of a deterministic linear programming formulation for SO-DTA introduced by Ziliaskopoulos (Ziliaskopoulos, A.K., 2000. A linear programming model for the single destination system optimum dynamic traffic assignment problem, Transportation Science, 34, 1–12). The proposed formulation is chance-constrained based and we demonstrate that it provides a robust SO solution with a user specified level of reliability. The model provides numerous insights and can be a useful tool in producing robust control and management strategies that account for uncertainty in applications where SO-DTA is relevant (e.g. evacuation modeling, computing alternate routes around freeway incidents and establishing lower bounds on network performance).     

Multicriteria evaluation on accessibility‐based transportation equity in road network design problem

This paper investigates the performance of accessibility‐based equity measurements in transportation and proposes a multiobjective optimization model to simulate the trade‐offs between equity maximization and cost minimization of network construction. The equity is defined as the spatial distribution of accessibilities across zone areas. Six representative indicators were formulated, including GINI coefficient, Theil index, mean log deviation, relative mean deviation, coefficient of variation, and Atkinson index, and incorporated into an equity maximization model to evaluate the performance sensitivity. A bilevel multiobjective optimization model was proposed to obtain the Pareto‐optimal solutions for link capacity enhancement in a stochastic road network design problem. A numerical analysis using the Sioux Falls data was implemented. Results verified that the equity indicators are quite sensitive to the pattern of network scenarios in the sense that the level of equity varies according to the amount of overall capacity enhancement as well as the assignment of improved link segments. The suggested multiobjective model that enables representing the Pareto‐optimal solutions can provide multiple options in the decision making of road network design. Copyright © 2012 John Wiley & Sons, Ltd.