基于混杂理论的电磁与摩擦集成制动方法

鉴于传统电子液压制动系统连续制动易产生"热衰退"现象，结构缺陷导致的制动响应慢，制动系统与电控系统衔接差等缺点，提出了一种基于混杂自动机模型的电磁与摩擦集成制动方法。首先分析集成制动器制动时的工作特点以及不同情况下对应的工作模式（纯电磁制动、纯摩擦制动以及集成制动），并确定3种制动模式的切换条件，通过逻辑门限算法将其实现。根据制动时车辆既具有连续运动状态又有离散状态的混杂特性，使用MATLAB/Stateflow建立基于制动模式切换系统的推广自动机模型，并根据制动模式切换控制策略，对3种制动模式切换进行试验，验证制动模式切换控制策略的合理性。最后选取车辆制动初速度为28 m·s^-1的直线制动工况，分别在高附着系数（0.85）以及低附着系数（0.3）的路面条件下，通过试验平台对控制算法和制动系统性能进行试验验证。研究结果表明：所提出的汽车混杂理论模型以及优化方法在在低附着系数（0.3）路面条件下，集成制动方法较传统液压制动系统缩短5.12%的制动距离，缩短制动时间0.3 s；在高附着系数（0.85）路面条件下，集成制动方法较传统液压制动系统缩短5.66%的制动距离，缩短制动时间0.2 s，能有效提高制动效能。     

Feedforward and Crone Feedback Control Strategies for Automobile ABS

Summary As mechatronic subsystems and especially new emerging technologies for brake systems are more and more developed, a new control architecture for ABS is proposed. The control architecture is designed using both feedback and feedforward controls that command pressure-controlled proportional servo-valves. The methods are developed to compensate for the uncertainty associated with the state of the road surface. The advantages of this strategy compared to the existing ABS strategy are discussed including simulations results using a complete vehicle and brake system model.     

Feedforward and Crone Feedback Control Strategies for Automobile ABS

Summary As mechatronic subsystems and especially new emerging technologies for brake systems are more and more developed, a new control architecture for ABS is proposed. The control architecture is designed using both feedback and feedforward controls that command pressure-controlled proportional servo-valves. The methods are developed to compensate for the uncertainty associated with the state of the road surface. The advantages of this strategy compared to the existing ABS strategy are discussed including simulations results using a complete vehicle and brake system model.     

Transient switching control strategy from regenerative braking to anti-lock braking with a semi-brake-by-wire system

Regenerative braking is an important technology in improving fuel economy of an electric vehicle (EV). However, additional motor braking will change the dynamic characteristics of the vehicle, leading to braking instability, especially when the anti-lock braking system (ABS) is triggered. In this paper, a novel semi-brake-by-wire system, without the use of a pedal simulator and fail-safe device, is proposed. In order to compensate for the hysteretic characteristics of the designed brake system while ensure braking reliability and fuel economy when the ABS is triggered, a novel switching compensation control strategy using sliding mode control is brought forward. The proposed strategy converts the complex coupling braking process into independent control of hydraulic braking and regenerative braking, through which a balance between braking performance, braking reliability, braking safety and fuel economy is achieved. Simulation results show that the proposed strategy is effective and adaptable in different road conditions while the large wheel slip rate is triggered during a regenerative braking course. The research provides a new possibility of low-cost equipment and better control performance for the regenerative braking in the EV and the hybrid EV.     

Investigation on evaluation of yaw stability for medium commercial vehicles

This paper proposes test scenarios for evaluation of yaw stability for medium commercial vehicles. Maneuvering, speed, longitudinal tire force, tire-road friction coefficient, road slope, and load condition are considerable factors that have effect on the medium commercial vehicle yaw stability. After conducting an analysis on these six factors, effective test scenarios were developed. A sine with dwell test is well known as a test scenario for evaluation of performance of electronic stability control (ESC) on passenger vehicles and heavy commercial vehicles. The SWD test was modified considering medium commercial vehicle dynamics, and the ramp steer maneuver with maximum acceleration test was proposed. Simulation validation has been conducted using field test data. From simulation study, it was shown that the ESC system for medium commercial vehicle is effectively evaluated by the proposed test scenarios.     

汽车电子防抱制动系统仿真的研究

本文分析了汽车车轮制动瞬态动力学，结合精确的１５自由度空间刚体动力学模型，定量地分析了车轮抱死松开所获得的加减速度值，并为防抱制动提供了准确的加减速度阈值，同时考虑到防抱制动系统本身装置的特性，提出了最佳又符合实际的制动矩控制参数，使用仿真结果更接近实际，为电子防抱制动系统的研究提供较完整的理论体系和分析方法，并开发了汽车电子防抱制动系统模型（ＨＶＯＳＭ－ＡＢＳ）及模拟程序，该程序具有１６种不同的     

Development of an electric booster system using sliding mode control for improved braking performance

Brake systems of the future, including BBW (Brake-by-Wire), are in development in various forms. In one of the proposed hydraulic BBW systems, an electric booster system replaces the pneumatic brake booster with an electric motor and a rotational-to-linear motion mechanism. This system is able to provide improved braking performance by the design of controllers with precise target pressure tracking and control robustness for better system reliability. First, a sliding mode controller is designed using the Lyapunov function approach to secure the robustness of the system against both the model uncertainty and the disturbance caused by the master cylinder and mechanical components. Next, a simulation tool is constructed to validate the electric booster system with the proposed controller. Finally, the electric booster system is implemented into an actual brake ECU and installed in a vehicle for testing under various braking conditions. The experimental results demonstrate that the proposed controller produces faster pressure build-up performance than the conventional brake system, and its tracking performance is sufficient to ensure comfortable braking.     

汽车线控制动技术及发展

现代汽车制动控制技术止朝着线控制动控制方向发展，线控制动系统将取代以液压或气压为主的传统制动控制系统。介绍了汽车线控制动技术的研究现状，对电子液压式制动系统和电子机械式制动系统的结构及工作原理进行了介绍和比较，并对电子机械式制动系统的关键部件及其性能特点进行了分析，论述了线控制动系统的关键技术及发展。     

Design and validation of an electro-hydraulic brake system using hardware-in-the-loop real-time simulation

This paper presents a novel electric booster (E-booster) that exibits superior performance advantages over traditional vacuum boosters. The proposed E-booster, consisting of an electric motor and a ball screw assembly, is designed for electro-hydraulic brake (EHB) systems to meet relevant requirements for electric vehicles and active safety technologies. A mathematical model for an EHB system is generated to determine the desired values of the parameters for the E-booster prototype using numerical simulation in MATLAB. Simulation results of the EHB system with the virtual E-booster demonstrate the feasibility and effectiveness of the innovative technique. Built upon the results derived from the numerical simualtions, an integrated algorithm based on the Kalman filter and a sliding mode control technique is designed to control the E-booster motor and to implement the brake booster function. A hardware-in-the-loop (HIL) real-time simulation system equipped with the E-booster prototype is developed. HIL real-time simulations are conducted to evaluate the proposed algorithm. The HIL real-time simulation results demonstrate that the proposed algorithm generates booster brake forces fast, and forces the ball nut to track the push rod well to ensure comfortable brake pedal feel.     

Design and hardware-in-loop implementation of collision avoidance algorithms for heavy commercial road vehicles

An important aspect from the perspective of operational safety of heavy road vehicles is the detection and avoidance of collisions, particularly at high speeds. The development of a collision avoidance system is the overall focus of the research presented in this paper. The collision avoidance algorithm was developed using a sliding mode controller (SMC) and compared to one developed using linear full state feedback in terms of performance and controller effort. Important dynamic characteristics such as load transfer during braking, tyre-road interaction, dynamic brake force distribution and pneumatic brake system response were considered. The effect of aerodynamic drag on the controller performance was also studied. The developed control algorithms have been implemented on a Hardware-in-Loop experimental set-up equipped with the vehicle dynamic simulation software, IPG/TruckMaker®. The evaluation has been performed for realistic traffic scenarios with different loading and road conditions. The Hardware-in-Loop experimental results showed that the SMC and full state feedback controller were able to prevent the collision. However, when the discrepancies in the form of parametric variations were included, the SMC provided better results in terms of reduced stopping distance and lower controller effort compared to the full state feedback controller.     

Effect of wheel-slip prevention based on sliding mode control theory for railway vehicles

It is important to consider the robustness when designing brake control systems, because of the model's uncertainties that result from the nonlinear characteristics of wheel-to-rail adhesion forces and brake material friction coefficients. This paper presents the experimental results from the new wheel-slip prevention control using nonlinear robust control theory. The authors performed experiments for the proposed wheel-slip prevention control to compare it with the conventional control laws. The experimental results proved the comparative effectiveness of the proposed control and showed high brake performance under nonlinear characteristics of brake dynamics.     

Vehicle Dynamic Control for In-Wheel Electric Vehicles Via Temperature Consideration of Braking Systems

?Vehicle dynamic control (VDC) systems play an important role with regard to vehicle stability and safety when turning. VDC systems prevent vehicles from spinning or slipping when cornering sharply by controlling vehicle yaw moment, which is generated by braking forces. Thus, it is important to control braking forces depending on the driving conditions of the vehicle. The required yaw moment to stabilize a vehicle is calculated through optimal control and a combination of braking forces used to generate the calculated yaw moment. However, braking forces can change due to frictional coefficients being affected by variations in temperature. This can cause vehicles to experience stability problems due an improper yaw moment being applied to the vehicle. In this paper, a brake temperature estimator based on the finite different method (FDM) was proposed with a friction coefficient estimator in order to solve this problem. The developed braking characteristic estimation model was used to develop a VDC cooperative control algorithm using hydraulic braking and the regenerative braking of an in-wheel motor. Performance simulations of the developed cooperative control algorithm were performed through cosimulation with MATLAB/Simulink and CarSim. From the simulation results, it was verified that vehicle stability was ensured despite any changes in the braking characteristics due to brake temperatures.     

基于预测恒定车头时距策略的自适应巡航控制研究

为了进一步提高车辆跟车过程中的跟踪性、安全性、舒适性和燃油经济性，针对已有间距策略表现过于保守或反应过于激烈等不足之处，提出了一种预测恒定车头时距策略。该策略考虑了相对加速度，建立了一种预测型期望车间距模型，进而应用于模型预测控制的多目标自适应巡航控制系统中，能进一步提高模型预测控制对多个控制目标的综合协调能力。搭建上层控制器、下层PID控制器、油门制动切换、逆纵向动力学模型。在多工况下仿真，通过建立性能评判指标对多目标进行量化分析。结果表明，所提出的间距策略在保证安全性的前提下，提升了自适应巡航控制系统的综合性能。在不同驾驶风格的车头时距下，跟踪性、舒适性和燃油经济性均有良好表现。     

Effect of wheel-slip prevention based on sliding mode control theory for railway vehicles

It is important to consider the robustness when designing brake control systems, because of the model's uncertainties that result from the nonlinear characteristics of wheel-to-rail adhesion forces and brake material friction coefficients. This paper presents the experimental results from the new wheel-slip prevention control using nonlinear robust control theory. The authors performed experiments for the proposed wheel-slip prevention control to compare it with the conventional control laws. The experimental results proved the comparative effectiveness of the proposed control and showed high brake performance under nonlinear characteristics of brake dynamics.     

Control of Wheel Slip Ratio Using Sliding Mode Controller with Pulse Width Modulation

For the control of anti-lock brake system (ABS), a longitudinal four-wheel vehicle model with brake actuator is described and a sliding mode controller with pulse width modulation (PWM) method has been developed for passenger vehicles. In our research, we introduce actuator dynamics of solenoid-solenoid valve type in system equation and derive the sliding mode control input theoretically. We propose using PWM method to compensate for the discrete nature of actuator dynamics by duty control. The effectiveness of the proposed control algorithms was confirmed by vehicle test on an in-door test bench that was specially constructed for the purpose concerned.     

Control of Wheel Slip Ratio Using Sliding Mode Controller with Pulse Width Modulation

For the control of anti-lock brake system (ABS), a longitudinal four-wheel vehicle model with brake actuator is described and a sliding mode controller with pulse width modulation (PWM) method has been developed for passenger vehicles. In our research, we introduce actuator dynamics of solenoid-solenoid valve type in system equation and derive the sliding mode control input theoretically. We propose using PWM method to compensate for the discrete nature of actuator dynamics by duty control. The effectiveness of the proposed control algorithms was confirmed by vehicle test on an in-door test bench that was specially constructed for the purpose concerned.     

分布式驱动电动汽车回馈制动失效的液压补偿控制

分布式驱动电动汽车各驱动轮转速和转矩可以单独精确控制,便于实现整车动力学控制和制动能量回馈,从而提升车辆的主动安全性和行驶经济性。但车辆在回馈制动过程中,一旦1台电机突发故障,其他电机产生的制动力矩将对整车形成附加横摆力矩,从而造成车辆失稳,此时虽可通过截断异侧对应电机制动力矩输出来保证行驶方向,但会使车辆制动力大幅衰减或丧失,同样不利于行车安全。为了解决此问题,提出并验证一种基于电动助力液压制动系统的制动压力补偿控制方法,力图有效保证整车制动安全性。以轮毂电机驱动汽车为例,首先建立了整车动力学模型以及轮毂电机模型,通过仿真验证了回馈制动失效的整车失稳特性以及电机转矩截断控制的不足;然后,建立了电动助力液压制动系统模型,并通过原理样机的台架试验验证了模型的准确性;接着,基于滑模控制算法设计了制动压力补偿控制器,并在单侧电机再生制动失效后的转矩截断控制基础上完成了液压制动补偿控制效果仿真验证;最后,通过实车试验证明了所提控制方法的有效性和实用性。研究结果表明：在分布式驱动电动汽车单侧电机再生制动失效工况下,通过异侧电机转矩截断控制和制动系统的液压主动补偿,能够使车辆快速恢复稳定行驶并满足制动强度需求。     

Desired yaw rate and steering control method during cornering for a six-wheeled vehicle

This paper proposes a steering control method based on optimal control theory to improve the maneuverability of a six-wheeled vehicle during cornering. The six-wheeled vehicle is believed to have better performance than a four-wheeled vehicle in terms of its capability for crossing obstacles, off-road maneuvering and fail-safe handling when one or two of the tires are punctured. Although many methods to improve the four-wheeled vehicle’s lateral stability have been studied and developed, there have only been a few studies on the six-wheeled vehicle’s lateral stability. Some studies of the six-wheeled vehicle have been reported recently, but they are related to the desired yaw rate of a four-wheeled vehicle to control the six-wheeled vehicle’s maneuvering during corning. In this paper, the sideslip angle and yaw rate are controlled to improve the maneuverability during cornering by independent control of the steering angles of the six wheels. The desired yaw rate that is suitable for a six-wheeled vehicle is proposed as a control target. In addition, a scaled-down vehicle with six drive motors and six steering motors that can be controlled independently is designed. The performance of the proposed control methods is verified using a full model vehicle simulation and scaled-down vehicle experiment.     

Design of Nonlinear Sliding Mode Controller with Pulse Width Modulation for Vehicular Slip Ratio Control

For the control of anti-lock brake system (ABS), a longitudinal four-wheel vehicle model with brake actuator is described and a sliding mode controller with pulse width modulation (PWM) method has been developed for passenger vehicles. In our research, we introduced actuator dynamics in the system equation and derived the equivalent control input theoretically. We propose using the PWM method to compensate for the discrete nature of actuator dynamics by duty control. Stability of the PWM controller for sliding mode control (SMC) was theoretically checked. The effectiveness of the proposed control algorithms was confirmed by vehicle tests on an In-door test bench that was specially constructed for the purpose concerned.     

消除高速公路运动波的可变限速控制方法

运动波是高速公路一种常见的交通拥堵，可通过可变限速控制有效消除。近年来，研究中提出了大量消除高速公路运动波的可变限速控制方法，却鲜有方法成功落地应用。可变限速控制方法的成功应用需满足3个基本条件，即模型预测的准确性，优化求解的实时性，以及控制方案的安全性，而当前研究中的方法难以同时满足上述基本条件。因此，为提高高速公路交通效率，保障高速公路交通安全，提出了消除高速公路运动波的可变限速优化控制方法。构建了模拟运动波传播的离散一阶交通流模型，解析了可变限速控制对交通效率及安全的影响机理，建立了提升交通效率、保障交通安全的可变限速优化控制方法。利用数值仿真模拟，测试了轻微拥堵与严重拥堵2种不同场景下限速控制方法的控制效果，评估了控制方法在提升交通效率和安全方面的表现，对比了所提方法与文献经典方法在控制效果上的优劣。结果表明：可变限速优化控制方法在2种场景下降低总行程时间分别为10.1%和10.6%，降低事故风险指标TET分别为72.6%和73.1%，降低事故风险指标TIT分别为92.4%和82.9%。与文献方法相比，在预测模型准确性以及对交通流效率与安全的改善方面均有提升，其中在严重拥堵测试场景下，效果提升更为显著。