The characteristic velocity stability indicator for passenger cars

Driver assistance systems have received increased attention as market demands have pushed for improved automotive safety. These systems are designed to aid the driver by preventing any unstable or unpredictable vehicle behaviour. One global indicator for stability and driving conditions could help to manage the control algorithms and driver warning subroutines. Another problem which could be solved by a precise driving situation indicator is evaluating new vehicles during test drives. After a short introduction to a linear lateral vehicle model, an analytical approach for an online calculation of different driving conditions (i.e., stability, understeering, oversteering, and neutralsteering) is given. A characteristic velocity stability indicator is defined, which allows online computation of the present driving condition. Results are then checked against real measurements of a test vehicle.     

Comparison of All-Wheel Steerings in the System Driver-Vehicle

Different load or tires and a drive on an ice-coated road can overcharge a driver to such an extend, that the result may be an accident. Therefore the aim of development is a self-acting compensation of the vehicle to different vehicle transfer behaviour (invariant vehicle behaviour).

The calculation of so called optimal characteristics shows, that only rear-wheel steering cannot realize this aim of development. Therefore an additional front-wheel angle, which is not influenced by the driver, is necessary. A transfer function can be calculated in order to get controlled steering of the rear wheels without the influence of load.

It is not possible to realize optimal characteristics, because the parameters of the vehicle are difficult to measure. Only an optimal diagnosis and control of driving condition realize a relief for the driver in every driving situation in order to avoid most of the accidents.

The often demanded sideslip angle compensation only worsens driving conditions on ice-coated roads. Therefore systems which identify the driving condition themselves have to be favoured in any case.     

Novel stability control strategy for distributed drive electric vehicle based on driver operation intention

In this paper, a novel direct yaw control method based on driver operation intention for stability control of a distributed drive electric vehicle is proposed. It was discovered that the vehicle loses its stability easily under an emergency steering alignment (EA) problem. An emergent control algorithm is proposed to improve vehicle stability under such a condition. A driver operation intention recognition module is developed to identify the driving conditions. When the vehicle enters into an EA condition, the module can quickly identify it and transfer the control method from normal direct yaw control to emergency control. Two control algorithms are designed. The emergency control algorithm is applied to an EA condition while the adaptive control algorithm is applied to other conditions except the EA condition. Both simulation results and real vehicle results show that: The driver module can accurately identify driving conditions based on driver operation intention. When the vehicle enters into EA condition, the emergent control algorithm can intervene quickly, and it has proven to outperform normal direct yaw control for better stabilization of vehicles.     

Human driving data-based design of a vehicle adaptive cruise control algorithm

This paper presents a vehicle adaptive cruise control algorithm design with human factors considerations. Adaptive cruise control (ACC) systems should be acceptable to drivers. In order to be acceptable to drivers, the ACC systems need to be designed based on the analysis of human driver driving behaviour. Manual driving characteristics are investigated using real-world driving test data. The goal of the control algorithm is to achieve naturalistic behaviour of the controlled vehicle that would feel natural to the human driver in normal driving situations and to achieve safe vehicle behaviour in severe braking situations in which large decelerations are necessary. A non-dimensional warning index and inverse time-to-collision are used to evaluate driving situations. A confusion matrix method based on natural driving data sets was used to tune control parameters in the proposed ACC system. Using a simulation and a validated vehicle simulator, vehicle following characteristics of the controlled vehicle are compared with real-world manual driving radar sensor data. It is shown that the proposed control strategy can provide with natural following performance similar to human manual driving in both high speed driving and low speed stop-and-go situations and can prevent the vehicle-to-vehicle distance from dropping to an unsafe level in a variety of driving conditions.     

Vehicle dynamics and road curvature estimation for lane departure warning system using robust fuzzy observers: experimental validation

This paper describes a new approach to estimate vehicle dynamics and the road curvature in order to detect vehicle lane departures. This method has been evaluated through an experimental set-up using a real test vehicle equipped with the RT2500 inertial measurement unit. Based on a robust unknown input fuzzy observer, the road curvature is estimated and compared to the vehicle trajectory curvature. The difference between the two curvatures is used by the proposed lane departure detection algorithm as the first driving risk indicator. To reduce false alarms and take into account driver corrections, a second driving risk indicator based on the steering dynamics is considered. The vehicle nonlinear model is deduced from the vehicle lateral dynamics and road geometry and then represented by an uncertain Takagi–Sugeno fuzzy model. Taking into account the unmeasured variables, an unknown input fuzzy observer is proposed. Synthesis conditions of the proposed fuzzy observer are formulated in terms of linear matrix inequalities using the Lyapunov method.     

Comparison of All-Wheel Steerings in the System Driver-Vehicle

SUMMARY

Different load or tires and a drive on an ice-coated road can overcharge a driver to such an extend, that the result may be an accident. Therefore the aim of development is a self-acting compensation of the vehicle to different vehicle transfer behaviour (invariant vehicle behaviour).

The calculation of so called optimal characteristics shows, that only rear-wheel steering cannot realize this aim of development. Therefore an additional front-wheel angle, which is not influenced by the driver, is necessary. A transfer function can be calculated in order to get controlled steering of the rear wheels without the influence of load.

It is not possible to realize optimal characteristics, because the parameters of the vehicle are difficult to measure. Only an optimal diagnosis and control of driving condition realize a relief for the driver in every driving situation in order to avoid most of the accidents.

The often demanded sideslip angle compensation only worsens driving conditions on ice-coated roads. Therefore systems which identify the driving condition themselves have to be favoured in any case.     

考虑肌电信号的驾驶人弯道操纵行为分析

驾驶人是"人-车-路"闭环系统中的核心。近年来,研发人性化、个性化的汽车驾驶辅助系统逐渐成为行业热点。为了更加透彻地理解弯道驾驶行为特性,为弯道驾驶辅助系统提供功效评估与优化,提出了一种考虑肌电信号的驾驶人弯道行驶过程操纵行为分析方法。招募12名驾驶人在试验场标准路面上进行实车试验,其中包含6名专业试车师与6名普通驾驶人,要求驾驶人分别以30,40,50 km·h^-1的不同初速度驶入U形弯道并自由驾驶。试验过程中记录驾驶人颈部肌电信号数据和车辆运动状态数据,分析转弯行驶车辆侧向运动对不同驾驶能力的驾驶人生理体验的影响,同时进一步探讨不同类型驾驶人在不同入弯速度条件下颈部肌电信号与侧向加速度的关联差异特性。试验结果表明：相同工况下,专业驾驶人和普通驾驶人颈部肌电特征值存在显著差异,专业驾驶人颈部肌电信号特征与车辆侧向加速度呈现一定的线性关系;随着驾驶任务难度的增加,驾驶能力好的驾驶人能够较好地适应任务的变化,在进行纵侧向耦合操纵时能够较好地协调身体生理反应与车辆侧向运动保持较好的关联特性。研究成果为进一步探索并完善驾驶体验评价方法提供了新的研究思路,同时,可为汽车辅助驾驶系统功能设计与智能汽车行驶性能的用户体验测评提供技术支撑。     

面向人因的车路协同系统综合测试及影响评估

面向冬奥主干通道兴延高速，以驾驶人适应性为导向，构建一种面向人因的车路协同系统硬件在环效能测试平台，针对多种道路条件、交通状态、特殊事件等面向高速公路设计13种交通情境，从主、客观2个维度实现车路协同系统包括主观感受、高效性、安全性、生态性、舒适性、有效性6个方面的驾驶人适应性评价，分析车路协同驾驶状态下的综合评估指标及影响机理。主观评估结果显示，车路协同技术对驾驶人有积极作用，52%的被试认为车载预警信息可以使行车过程更安全。客观运行结果表明：由于车路协同状态下驾驶人对于前方道路危险状况的可预知性，导致驾驶人提前降速，运行速度降低，效率有所下降；车路协同条件下的加速度和换道次数明显减小，其安全性显著提升；由于车路协同系统避免了驾驶人对于突发危险状况的紧急制动，因此车辆的油耗、排放均明显降低，其生态性改善效果显著；归因于驾驶人对于车路协同系统熟悉程度不足，导致舒适度各系统存在不一致的结论，也表明驾驶人对于车路协同系统的接受度和信任度均有待进一步提高；驾驶人在车路协同条件下可获取不同路段的限速值和超速提示，其有效性表现出明显的优势，速度跟随比有显著提升。所构建的测试平台和指标体系为进一步深层次挖掘车路协同的作用机理奠定了基础。     

eTS fuzzy driver model for simultaneous longitudinal and lateral vehicle control

In this paper, evolving Takagi-Sugeno (eTS) fuzzy driver model is proposed for simultaneous lateral and longitudinal control of a vehicle in a test track closed to traffic. The developed eTS fuzzy driver model can capture human operator’s driving expertise for generating desired steering angle, throttle angle and brake pedal command values by processing only information which can be supplied by the vehicle’s on-board control systems in real time. Apart from other fuzzy rule based (FRB) models requiring human expert knowledge or off-line clustering, the developed eTS driver model can adapt itself automatically, even ‘from scratch’, by an on-line learning process using eTS algorithm while human driver is supervising the vehicle. Proposed eTS fuzzy driver model’s on-line human driver identification capability and autonomous vehicle driving performance were evaluated on real road profiles created by digitizing two different intercity express ways of Turkey in IPG© CarMaker® software. The training and validation simulation results demonstrated that eTS fuzzy driver model can be used in product development phase to speed up different tests via realistic simulations. Furthermore eTS fuzzy driver model has an application potential in the field of autonomous driving.     

Dynamic stability of forklift trucks in cornering situations: parametrical analysis using a driving simulator

This paper describes the examination of the vehicle dynamics and stability of four-wheeled forklift trucks (FLTs) in cornering situations. Cornering at excessive speed is one major reason for fatal accidents with forklifts caused by lateral tipover. In order to increase the lateral stability of this kind of working machinery, the influence of certain important design properties has been studied using an appropriate vehicle simulation model and a driving simulator. The simulation model is based on a multi-body system approach and includes submodels for the propulsion system and the tyres. The driving behaviour of the operator has not been modelled. Instead, a driving simulator has been built up and a real human driver was employed for ensuring adequate and realistic model input. As there have not been any suitable standardised test manoeuvres available for FLTs, a new driving test has been developed to assess the lateral stability. This test resembles the well-known J turn/Fishhook turn, but includes a more dynamic counter-steering action. Furthermore, the dimensions of the test track are defined. Therefore, the test is better adapted to the driving dynamics of forklifts and reflects the real driver behaviour more closely. Finally, a parametrical study has been performed, examining the influence of certain important technical properties of the truck such as the maximum speed, the position of centre of gravity, rear axle design features and tyre properties. The results of this study may lead to a better understanding of the vehicle dynamics of forklifts and facilitate goal-oriented design improvements.     

融合预瞄与势场栅格法的紧急避撞驾驶人模型

紧急避障工况下的驾驶人操作具有响应快且动作幅值较大的特点，传统预瞄驾驶人模型已不能适应紧急避障工况的需求，故考虑实际避撞场景开发相应的驾驶人模型就显得尤为必要。针对此种状况，基于驾驶模拟器，结合紧急避撞工况实际驾驶人操纵数据，提出了一种融合预瞄与势场栅格法的紧急避撞驾驶人模型。首先针对紧急避撞工况下车辆运动特点，建立车辆横、纵向耦合非线性动力学模型，并给出其状态空间方程描述；其次，离线仿真分析紧急避撞系统特征，并结合线性二次型最优控制，建立最优曲率预瞄+跟踪误差反馈驾驶人模型；再者，基于紧急避撞工况下真实驾驶人经验转向行为数据，开发基于势场栅格法的驾驶人模型，为进一步提高驾驶人模型对避障行驶工况的适应性，将基于势场栅格法的驾驶人模型与最优曲率预瞄+跟踪误差反馈驾驶人模型进行融合，并基于Sigmoid函数实现两者输出的权重分配；最后，针对所提出的融合预瞄与势场栅格法的驾驶人模型，开展基于避撞台架的驾驶人在环仿真试验以及实车试验。研究结果表明：在紧急避撞工况下，对比最优曲率预瞄+跟踪误差反馈驾驶人模型，融合预瞄与势场栅格法的驾驶人模型输出的转向动作与实际驾驶人行为较为接近，可在保证避障安全性的前提下，兼顾避障路径跟踪精度与车辆行驶的稳定性。     

Driver propensity characterization for different forward collision warning times

The forward collision warning system, which warns danger to the driver after sensing possibility of crash in advance, has been actively studied recently. Such systems developed until now give a warning, regardless of driver’s driving propensity. However, it’s not reasonable to give a warning to every driver at the same time because drivers are different in driving propensity. In this study, to give a warning to each driver differently, three metrics classifying driver’s driving propensity were developed by using the driving data on a testing ground. These three metrics are the predicted time headway, required deceleration divided by the deceleration of the leading vehicle, and the resultant acceleration divided by the deceleration of the leading vehicle. Driving propensity was divided into 3 groups by using these metrics for braking and steering cases. In addition, these metrics were verified by making sure that braking propensity could be classified on public roads as well.     

Risk assessment based on driving behavior for preventing collisions with pedestrians when making across-traffic turns at intersections

Traffic accident statistics in Japan show the necessity of preventing vehicle-on-pedestrian accidents. If the risk of a vehicle colliding with pedestrians could be evaluated in advance, driver-assistance systems would be able to support drivers to avoid potential collisions. Here, features of driving behavior and methods for assessing the risk of collision were investigated for a right turn at an intersection in left-hand traffic, which is a typical vehicle-on-pedestrian accident scenario. The results showed that pedestrian-collision risk can be evaluated from how the driver slows the vehicle and where the driver looks while turning during the maneuver. Moreover, pedestrian-collision risk could be predicted based on driving behavior upon commencement of steering when making an across-traffic turn.     

Highly reliable driving workload analysis using driver electroencephalogram (EEG) activities during driving

Traffic accidents are caused by various factors, which can be classified into human factors, vehicle factors and environmental factors. Recently, human factors have been drawing particular attention as efforts are being made to enhance the safety performance of vehicles and improve road conditions. Driving distraction caused by an increased driving workload is a representative human factor. Various studies in the past have attempted to quantify the driving workload by using EEG activities. However, they have failed to consider vibration properties generated from vehicle engines. A number of noise signals were included in brainwave signal processing, which resulted in a failure to obtain reliable outcomes. Thus, this study suggests driver EEG activities free of vehicle engine secondary vibration in order to develop a method that analyzes the driving workload with high statistical reliability. By using the analytical method developed in this study, standard values of driving workload for straight and left-turn driving that has statistical significance could be calculated. The analytical method for driving workload created by this study can be applied to HVI and road design.     

Stability analysis of a nonlinear vehicle model in plane motion using the concept of Lyapunov exponents

For the first time, this paper investigates the application of the concept of Lyapunov exponents to the stability analysis of the nonlinear vehicle model in plane motion with two degrees of freedom. The nonlinearity of the model comes from the third-order polynomial expression between the lateral forces on the tyres and the tyre slip angles. Comprehensive studies on both system and structural stability analyses of the vehicle model are presented. The system stability analysis includes the stability, lateral stability region, and effects of driving conditions on the lateral stability region of the vehicle model in the state space. In the structural stability analysis, the ranges of driving conditions in which the stability of the vehicle model is guaranteed are given. Moreover, through examples, the largest Lyapunov exponent is suggested as an indicator of the convergence rate in which the disturbed vehicle model returns to its stable fixed point.     

High speed driving stability of passenger car under crosswind effects

The driving stability of a passenger car at high-speed and under crosswind conditions is affected by aerodynamic characteristics as well as their dynamic characteristics, suspension, and weight distribution. In this study, the total measuring system was thought up to understand the transient vehicle dynamics and aerodynamics with driver’s control inputs all together. The test results were taken from a full-scale wind tunnel test, a crosswind generator test and an on-road test. We investigated major aerodynamic parameters that affect the driving stability of passenger cars under crosswind effects such as overtaking, passing each other, natural crosswind, etc. The reaction rate of high-speed stability will be improved when we minimize the total lift, side force and especially the yawing moment.     

基于驾驶工作负荷的高海拔地区隧道照明亮度分析

为研究高海拔地区与平原区驾驶员驾驶工作负荷差异特性以得到适用于高海拔地区的隧道照明亮度需求，以及客观量化高海拔地区公路隧道照明设计与管理标准提供理论、方法与技术依据，基于驾驶员驾驶工作负荷理论，从驾驶视认安全、稳定和舒适性的角度，分别在道路运行条件相似的江西宜安Ⅱ级公路和青藏公路高原青藏段（公路－Ⅱ级）设计实车试验进行定量研究。1）运用CART分类方法分析实地驾驶试验数据，发现海拔高度与驾驶员正常行驶的驾驶工作负荷之间呈正相关关系： 平原区驾驶员驾驶需求最低、驾驶工作负荷度最小，海拔高度3 200～3 300 m驾驶工作负荷度居中，海拔高度4 300～4 400 m驾驶工作负荷度最大。2）通过分析得到高海拔地区驾驶员驾驶工作负荷可根据海拔高度进行修正，得到修正系数和驾驶工作负荷度阈限。3）提出高海拔地区隧道照明视认需求相对于平原区的修正系数，海拔高度3 200～3 300 m时为1.2，海拔高度4 300～4 400 m时为1.8。4）得到不同海拔高度公路隧道各个特征段照明亮度设计标准。     

Role of steering wheel feedback on driver performance: driving simulator and modeling analysis

When driving in curves, how do drivers use the force appearing on the steering wheel? As it carries information related to lateral acceleration, this force could be necessary for drivers to tune their internal model of vehicle dynamics; alternatively, being opposed to the drivers' efforts, it could just help them stabilize the steering wheel position. To assess these two hypotheses, we designed an experiment on a motion-based driving simulator. The steering characteristics of the vehicle were modified in the course of driving, unknown to drivers. Results obtained with standard drivers showed a surprisingly wide range of adaptation, except for exaggerated modifications of the steering force feedback. A two-level driver model, combining a preview of vehicle dynamics and a neuromuscular steering control, reproduces these experimental results qualitatively and indicates that adaptation occurs at the haptic level rather than in the internal model of vehicle dynamics. This effect is related to other theories on the manual control of dynamics systems, wherein force feedback characteristics are abstracted at the position control level. This research also illustrates the use of driving simulation for the study of driver behavior and future intelligent steering assistance systems.     

基于人机共驾的车道保持辅助控制系统研究（双语出版）

车道保持控制系统是汽车安全辅助驾驶的重要组成部分，可有效提高汽车主动安全性、避免车辆无意识地偏离本车道。目前，大部分车道保持控制系统在工作时将驾驶人的操作视为外界干扰，没有考虑人机共驾阶段下驾驶人与控制系统的控制权分配问题，易造成人机冲突、影响驾驶人的驾驶感受。论文兼顾驾驶人与辅助控制系统各自优势，基于人机共驾技术对车道保持控制系统进行研究。构建基于安全行驶区域与最晚预警边界相结合的车道偏离决策模型，在保证其预警精度的同时降低计算复杂性，根据车辆行驶状态和路面附着系数动态调整预警阈值；研究串级MPC-PID控制策略实现对车辆横向位置的控制，将最优问题转化为二次规划求得目标前轮转角，利用PID算法完成对目标前轮转角的跟踪；引入共驾系数对车辆的控制权进行分配，研究共驾系数分配模型，以车辆状态误差和驾驶人转向力矩作为模糊控制的输入变量、共驾系数作为输出变量，降低辅助控制系统与驾驶人之间的冲突；最后，利用CarSim与Simulink联合仿真对所研究的控制策略进行仿真验证，结果表明共驾系数能够根据驾驶人的操作和车辆运行状态的变化实现动态调整，辅助控制力矩与驾驶人输入力矩变化趋势相同，在保留驾驶人一定操作的基础下可避免车辆偏离车道、降低人机冲突。     

Role of steering wheel feedback on driver performance: driving simulator and modeling analysis

When driving in curves, how do drivers use the force appearing on the steering wheel? As it carries information related to lateral acceleration, this force could be necessary for drivers to tune their internal model of vehicle dynamics; alternatively, being opposed to the drivers' efforts, it could just help them stabilize the steering wheel position. To assess these two hypotheses, we designed an experiment on a motion-based driving simulator. The steering characteristics of the vehicle were modified in the course of driving, unknown to drivers. Results obtained with standard drivers showed a surprisingly wide range of adaptation, except for exaggerated modifications of the steering force feedback. A two-level driver model, combining a preview of vehicle dynamics and a neuromuscular steering control, reproduces these experimental results qualitatively and indicates that adaptation occurs at the haptic level rather than in the internal model of vehicle dynamics. This effect is related to other theories on the manual control of dynamics systems, wherein force feedback characteristics are abstracted at the position control level. This research also illustrates the use of driving simulation for the study of driver behavior and future intelligent steering assistance systems.