Prediction of ride quality of a Maglev vehicle using a full vehicle multi-body dynamic model

In magnetically levitated (Maglev) transportation systems, especially in electromagnetic suspension system (EMS) type Maglev systems, highly accurate prediction of ride quality is very important in order to reasonably relax guideway construction tolerances or constraints and stiffness while meeting the specification for ride comfort, thereby reducing guideway construction and maintenance costs. A full vehicle multi-body dynamic model is proposed, to facilitate a rigorous ride quality prediction of an EMS-type Maglev vehicle. Using the more realistic dynamic model proposed in this paper, the effects of guideway deflection limits, surface roughness, and levitation control system parameters on ride quality are studied numerically. The results obtained from the simulation studies are then used to facilitate a discussion of the trade-off between guideway smoothness and vehicle suspension. It can be expected that these studies could suggest cost-effective specifications for guideway construction tolerances and stiffness and EMS.     

Predictive control of a vehicle trajectory using a coupled vector with vehicle velocity and sideslip angle

In this paper, a predictive algorithm for vehicle trajectory control using the vehicle velocity and sideslip angle is proposed. Since the driving state of a vehicle generates nonholonomic constraint equations, it is difficult to control the trajectory with a conventional control algorithm. Furthermore, control vectors such as vehicle velocity and sideslip angle are coupled together; hence, a separate control for each variable is not suitable. In this study, a coupled control vector that combines the velocity and sideslip angle is proposed for the predictive control of vehicle trajectory. Since the coupled control vector is derived from the status of the vehicle’s motion, it is easy to generate a feedback control vector for the predictive controller. The coupled vector cannot be directly used as input to the vehicle systems; therefore, the vehicle input vector should be calculated from the control vector using a nonlinear function. Since nonlinear functions are not inserted in the control loop, they are calculated by the controller. Therefore, this method does not require a linearization process in the control logic, which enhances the stability and accuracy of the predictive controller.     

纯电动汽车匹配及优化分析

文章以A级轿车纯电动平台进行匹配分析,基于AVLCruise和MATLAB软件进行整车匹配及优化分析。前期进行整车匹配选型工作,随着项目进行,中期试验样车进行动力性经济性试验验证,后期进行动力性问题整改,能耗的优化。文章为汽车电动车型项目开发提供一定指导参考。     

Material characteristics of a vehicle door seal and its effect on vehicle vibrations

The vibration characteristics of the door panels are affected by the weatherstrip seals used in between the doors and vehicle body along the perimeter of the doors. The weatherstrip seals exhibit nonlinear and viscoelastic material properties that vary with frequency, temperature, strain rate and amplitude, and previous load history. The material properties of the seal must be investigated carefully in order to predict the vibration characteristics of the automobiles under different loading conditions.

In this study, we developed hyperelastic and viscoelastic models of the weatherstrip seal to predict dynamic performance of a vehicle door and its effect on the overall vehicle dynamics. For this purpose, first, static compression and stress relaxation experiments were performed on the seal using a robotic indenter equipped with force and displacement sensors and then a finite element model utilising the results of these experiments was developed in ANSYS. Finally, a representative model of the seal was integrated into the finite element model of the vehicle door to investigate its effect on the vehicle vibrations. The model predictions were validated using experimental modal analysis performed on the vehicle door with and without the seal. It was observed that the seal has a significant effect on the vehicle dynamics.     

客车企业进入变革时代

市场需求、竞争格局、采购模式、营销模式、产品技术、成本和效率，都面临着变革的抉择，客车企业该如何应对？[编者按]     

Steady-state steering of a tilting three-wheeled vehicle

The design of a narrow-track enclosed vehicle for urban transport was the subject of the CLEVER project. Due to its narrow track and requirement for car-like controls, an actively controlled tilting system was integrated into the chassis to allow for high lateral accelerations without rolling over. The cornering behaviour of this unique vehicle concept is investigated and compared with the ideal Ackermann response. The steer kinematics of this 1F1T (one front wheel, one wheel tilting) configuration are assessed through the use of a steady-state steering model, with attention focused on how steer parameters such as tilt axis height and inclination can be tuned to provide the required response. A prototype vehicle was designed and built and the results of experimental testing are presented to illustrate the real balancing performance of the combined steering and tilting approach used for the CLEVER vehicle. The experimental results follow the trends demonstrated in the model.     

Rollover mitigation for a heavy commercial vehicle

A heavy commercial vehicle has a high probability of rollover because it is usually loaded heavily and thus has a high center of gravity. An anti-roll bar is efficient for rollover mitigation, but it can cause poor ride comfort when the roll stiffness is excessively high. Therefore, active roll control (ARC) systems have been developed to optimally control the roll state of a vehicle while maintaining ride comfort. Previously developed ARC systems have some disadvantages, such as cost, complexity, power consumption, and weight. In this study, an ARC-based rear air suspension for a heavy commercial vehicle, which does not require additional power for control, was designed and manufactured. The rollover index-based vehicle rollover mitigation control scheme was used for the ARC system. Multi-body dynamic models of the suspension subsystem and the full vehicle were used to design the rear air suspension and the ARC system. The reference rollover index was tuned through lab tests. Field tests, such as steady state cornering tests and step steer tests, demonstrated that the roll response characteristics in the steady state and transient state were improved.     

Slip-based terrain estimation with a skid-steer vehicle

In this paper, a novel approach for online terrain characterisation is presented using a skid-steer vehicle. In the context of this research, terrain characterisation refers to the estimation of physical parameters that affects the terrain ability to support vehicular motion. These parameters are inferred from the modelling of the kinematic and dynamic behaviour of a skid-steer vehicle that reveals the underlying relationships governing the vehicle-terrain interaction. The concept of slip track is introduced as a measure of the slippage experienced by the vehicle during turning motion. The proposed terrain estimation system includes common onboard sensors, that is, wheel encoders, electrical current sensors and yaw rate gyroscope. Using these components, the system can characterise terrain online during normal vehicle operations. Experimental results obtained from different surfaces are presented to validate the system in the field showing its effectiveness and potential benefits to implement adaptive driving assistance systems or to automatically update the parameters of onboard control and planning algorithms.     

介绍一种新型多功能保障车

根据目前国内外无人机地面保障系统的现状及发展趋势,从实际工程应用的角度,阐述了一种新型多功能保障车的主要功能、构成、特点及其集成思路,同时对多功能保障车的未来发展趋势提出了一些设想。     

Performance measurements of a tracked vehicle system

To improve crossing ability, the most important performance factor for tracked vehicle systems operating on low-bearing capacity peats, and to minimize income losses that result from downtime and maintenance costs, a vehicle was designed in order to adapt to operating condition changes. This article describes the mobile performance of a novel vehicle with segmented rubber tracks on a low-bearing capacity peat. At an equivalent travelling speed, the novel vehicle’s tractive performance in a variable operating environment caused by changes in terrain cohesiveness and hydrodynamic responses was superior to that of the previous model. The new vehicle, which could be operated on the Sepang peat, showed a tractive effort of 42.2% of the gross vehicle weight in field experiments; the recommended minimum tractive effort is between 30 and 36% of the gross vehicle weight.     

Dynamics of a railway vehicle on a laterally disturbed track

In this article a theoretical investigation of the dynamics of a railway bogie running on a tangent track with a periodic disturbance of the lateral track geometry is presented. The dynamics is computed for two values of the speed of the vehicle in combination with different values of the wavelength and amplitude of the disturbance. Depending on the combinations of the speed, the wavelength and the amplitude, straight line forward motion, different modes of symmetric or asymmetric periodic oscillations or aperiodic motions, which are presumably chaotic, are found. Statistical methods are applied for the investigation. In the case of sinusoidal oscillations they provide information about the phase shift between the different variables and the amplitudes of the oscillations. In the case of an aperiodic motion the statistical measures indicate some non-smooth transitions.     

骑车·玩车

中国人对于摩托车的心态有两种:一是把车当成交通工具,主要目的是用于上下班代步,这类人对于车的要求不高,不管是小链机还是顶杆式,更无所谓外观,只要发动机和行走机构正常就行,即俗话说的骑车.     

Automatic path-tracking controller of a four-wheel steering vehicle

The present paper proposes an automatic path-tracking controller of a four-wheel steering (4WS) vehicle based on the sliding mode control theory. The controller has an advantage in that the front- and rear-wheel steering can be decoupled at the front and rear control points, which are defined as centres of percussion with respect to the rear and front wheels, respectively. Numerical simulations using a 27-degree-of-freedom vehicle model demonstrated the following characteristics: (1) the automatic 4WS controller has a more stable and more precise path-tracking capability than the 2WS controller, and (2) the automatic 4WS controller has robust stability against system uncertainties such as cornering power perturbation, path radius fluctuation, and cross-wind disturbance.     

Lateral dynamics emulation via a four-wheel steering vehicle

In this paper, we examine the lateral dynamics emulation capabilities of an automotive vehicle equipped with four-wheel steering. We first demonstrate that the lateral dynamics of a wide range of vehicles can be emulated, either with little or with no modification on the test vehicle. Then we discuss a sliding mode controller for active front and rear wheel steering, in order to track some given yaw rate and side-slip angle. Analytically, it is shown that the proposed controller is robust to plant parameter variations by±10%, and is invariant to unmeasurable wind disturbance. The performance of the sliding mode controller is evaluated via computer simulations to verify its robustness to vehicle parameter variations and delay in the loop, and its insensitivity to wind disturbance. Finally, the emulation of a bus, a van, and two commercially available passenger vehicles is demonstrated in an advanced nonlinear simulator.     

On the equivalent wheelbase of a three-axle vehicle

The steady-state handling properties of a rigid vehicle with a tandem rear axle configuration are developed. This work uses conventions resulting in a parsimonious characterisation of steady-state handling of such three-axle vehicles that is shown to be a simple extension of the well-known two-axle bicycle model. Specifically the concepts of understeer and wheelbase are developed for a three-axle vehicle, and shown to play the same role in characterising vehicle handling as they do in the well-known two-axle vehicle model. An equivalent wheelbase of a three-axle vehicle is expressed in terms of vehicle geometry and cornering stiffness of each axle. The model developed in this work is reconciled with previous models that make use of simplifying assumptions found in the literature.     

Preview suspension control for a full tracked vehicle

In this study, preview control algorithms for the active and semi-active suspension systems of a full tracked vehicle (FTV) are designed based on a 3-D.O.F model and evaluated. The main issue of this study is to make the ride comfort characteristics of a fast moving tracked vehicle better to keep an operator’s driving capability. Since road wheels almost trace the profiles of the road surface as long as the track doesn’t depart from the ground, the preview information can be obtained by measuring only the absolute position or velocity of the first road wheel. Simulation results show that the performance of the sky-hook suspension system almost follows that of full state feedback suspension system and the on-off semi-active system carries out remarkable performance with the combination of 12 on-off semi-active suspension units. The results simulated with 1^st and 2^nd weighting sets mean that the suspension system combined with the soft type of inner suspension and hard type of outer suspension can carry out better ride comfort characteristics than that with identical suspensions. The full tracked vehicle (FTV) system is uncontrollable and the system is split into controllable and uncontrollable subspace using singular value decomposition transformation. Frequency response curves to four types of inputs, such as heaving, pitching, rolling, and warping inputs, also demonstrate the merits of preview control in ride comfort. All the frequency characteristic responses confirm the continuous time results.     

Modelling and handling dynamics of a wind-driven vehicle

This paper presents a study on the dynamic modelling of a land-yacht, i.e. a ground vehicle that is propelled by wind energy through the use of a vertical airfoil. First, a non-linear dynamic model of the land-yacht motion is derived using a compact matrix notation. Then, an introduction to the study of the performance and handling characteristics is presented. It is considered the vehicle response to input commands, i.e. steering to follow the desired course and adjusting the sail angle according to environmental conditions, that is, wind intensity and direction. The model demonstrates the performance in terms of maximum longitudinal speed and the effects on handling behaviour of the major vehicle design and operational parameters, including location of the centre of gravity and centre of effort, and forward speed, and it leads to conclusions of practical significance concerning directional control and stability.     

混合型汽车

通用汽车集团生产的多功能运动车（SUV）在美国销售市场上的表现也许不尽如人意，但是其并未因此而放弃对SUV市场的争夺。只是，这家汽车制造商似乎正在重新思考自己对SUV的诠释哲学，这一点从其最新推出的概念车型Antara GTC身上可不难看出。     

Ride quality evaluation of a vehicle with a planar suspension system

The longitudinal connection between a chassis and a wheel in a conventional vehicle suspension system is commonly very stiff than the vertical connection. Such a mechanism can efficiently isolate vibrations and absorb shocks in the vertical direction but cannot sufficiently attenuate the impact in the longitudinal direction. In order to overcome such a limitation, a planar suspension system (PSS) with spring–damper struts in both the longitudinal and vertical directions is proposed so that the vibration along any direction in the wheel rotation plane can be isolated. In this paper, the dynamic responses of a vehicle with PSS due to a single bump and random road unevenness are investigated. The ride quality of the vehicle with PSS is evaluated in accordance with ISO 2631. A comparison with that of a similar conventional vehicle is conducted to demonstrate the promising potentials of the PSS in improving the vehicle ride quality.     

Modelling and analysis of a gyrostat elastically attached to a vehicle

In recent studies, the dynamic response of a passenger car to a gyrostat was investigated for a series of driving manoeuvres, but the gyrostat was assumed to be rigidly supported, thus neglecting the effect of rotor precession. The aim of the present study is the modelling and investigation of the gyrostat-vehicle interaction for elastically mounted gyrostats. For this purpose, a general model describing the motion of a gyrostat elastically supported by a moving platform is derived. Emphasis is placed on the mathematical derivation, where all considerations that are necessary to arrive at the final result are included. Thus, the presented considerations and results can be easily adopted and are suitable to serve beyond their actual purpose as a reference work for other applications. The derived model is tested with the aid of vehicle dynamics simulations and the simulation results prove to be consistent with the results of the rigid attachment model, provided that the elastic approach is subjected to high-bearing stiffnesses. However, it is shown that at lower bearing stiffnesses the solutions are progressively different, since low-bearing stiffnesses enable the gyrostat to move, due to the compliance of the bearings itself, relative to the vehicle chassis with high-angular velocities.