Using the lead vehicle as preview sensor in convoy vehicle active suspension control

Both ride quality and roadholding of actively suspended vehicles can be improved by sensing the road ahead of the vehicle and using this information in a preview controller. Previous applications have used look-ahead sensors mounted on the front bumper to measure terrain beneath. Such sensors are vulnerable, potentially confused by water, snow, or other soft obstacles and offer a fixed preview time. For convoy vehicle applications, this paper proposes using the overall response of the preceding vehicle(s) to generate preview controller information for follower vehicles. A robust observer is used to estimate the states of a quarter-car vehicle model, from which road profile is estimated and passed on to the follower vehicle(s) to generate a preview function. The preview-active suspension, implemented in discrete time using a shift register approach to improve simulation time, reduces sprung mass acceleration and dynamic tyre deflection peaks by more than 50% and 40%, respectively. Terrain can change from one vehicle to the next if a loose obstacle is dislodged, or if the vehicle paths are sufficiently different so that one vehicle misses a discrete road event. The resulting spurious preview information can give suspension performance worse than that of a passive or conventional active system. In this paper, each vehicle can effectively estimate the road profile based on its own state trajectory. By comparing its own road estimate with the preview information, preview errors can be detected and suspension control quickly switched from preview to conventional active control to preserve performance improvements compared to passive suspensions.     

Human Control of Road Vehicles

SUMMARY

This paper reviews the present state of knowledge of human control of road vehicles. Lateral and longitudinal control of motorcycles and automobiles are discussed, whenever information is available. Although knowledge has increased greatly in the last decade, the major part of this concerns lateral control and most is of an ad hoc nature. Adequate mathematical models for longitudinal motion of the vehicle are yet to be developed. Their development is a necessary step in the attainment of a complete understanding of longitudinal control.     

Trends in vehicle motion control for automated driving on public roads

ABSTRACT

In this paper, we describe how vehicle systems and the vehicle motion control are affected by automated driving on public roads. We describe the redundancy needed for a road vehicle to meet certain safety goals. The concept of system safety as well as system solutions to fault tolerant actuation of steering and braking and the associated fault tolerant power supply is described. Notably restriction of the operational domain in case of reduced capability of the driving automation system is discussed. Further we consider path tracking, state estimation of vehicle motion control required for automated driving as well as an example of a minimum risk manoeuver and redundant steering by means of differential braking. The steering by differential braking could offer heterogeneous or dissimilar redundancy that complements the redundancy of described fault tolerant steering systems for driving automation equipped vehicles. Finally, the important topic of verification of driving automation systems is addressed.     

Robust control of anti-lock brake system

A robust control algorithm for an anti-lock brake system is proposed. The method used is based on static-state feedback of longitudinal slip and does not involve controller scheduling with changing vehicle speed or road adhesion coefficient estimation. An improvement involving scheduling of longitudinal slip reference with longitudinal acceleration measurement is included. Electromechanical braking actuators are used in simulations, and the algorithm used in this study is shown to have high performance on roads with constant and varying adhesion coefficients, displaying nice robustness properties against large vehicle speed and road adhesion coefficient variations. Guidelines are provided for tuning controller gains to cope with unknown actuator delay and measurement noise.     

Fuzzy Logic Traction Controllers and their Effect on Longitudinal Vehicle Platoon Systems

This paper presents two fuzzy logic traction controllers and investigates their effect on longitudinal platoon systems. A fuzzy logic approach is appealing for traction control because of the nonlinearity and time-varying uncertainty involved in traction control systems

The fuzzy logic traction controllers we present regulate brake torque to control wheel slip, which is the normalized difference between wheel and vehicle speed. One fuzzy controller estimates the peak slip corresponding to the maximum tire-road adhesion coefficient and regulates wheel slip at the peak slip. The controller is attractive because of its ability to maximize acceleration and deceleration regardless of road condition. However, we find through simulations the controller's performance degrades in the presence of time-varying uncertainties. The other fuzzy logic controller regulates wheel slip at any desired value. Through simulations we find the controller robust against changing road conditions and uncertainties. The target slip is predetermined and not necessarily the peak slip for all road conditions. If the target slip is set low, stable acceleration and deceleration is guaranteed, regardless of road condition

We also study the effect of traction control on longitudinal vehicle platoon systems using simulations. The simulations include acceleration and deceleration maneuvers on an icy road. The results indicate traction control may substantially improve longitudinal platoon performance, especially when icy road conditions exist.     

State observer-based sliding mode control for semi-active hydro-pneumatic suspension

This paper proposes an improved virtual reference model for semi-active suspension to coordinate the vehicle ride comfort and handling stability. The reference model combines the virtues of sky-hook with ground-hook control logic, and the hybrid coefficient is tuned according to the longitudinal and lateral acceleration so as to improve the vehicle stability especially in high-speed condition. Suspension state observer based on unscented Kalman filter is designed. A sliding mode controller (SMC) is developed to track the states of the reference model. The stability of the SMC strategy is proven by means of Lyapunov function taking into account the nonlinear damper characteristics and sprung mass variation of the vehicle. Finally, the performance of the controller is demonstrated under three typical working conditions: the random road excitation, speed bump road and sharp acceleration and braking. The simulation results indicated that, compared with the traditional passive suspension, the proposed control algorithm can offer a better coordination between vehicle ride comfort and handling stability. This approach provides a viable alternative to costlier active suspension control systems for commercial vehicles.     

汽车纵向加/减速度多模型分层切换控制

针对汽车纵向动力学模型的大不确定性,设计了一种基于鲁棒控制理论的汽车纵向加速度多模型分层切换控制系统。通过分析汽车纵向动力学特性,用4个不确定模型覆盖对象不确定性,并应用LM I方法设计对应的鲁棒性能控制器集合。考虑鲁棒控制系统的特点,设计了一种对不确定性的系统增益进行估计的切换指标函数,以选择控制器进行控制。实验表明,提出的方法在大不确定性下可以对纵向加速度有效控制。     

基于MPC的独立驱动电动汽车稳定性集成控制

针对独立驱动电动汽车在高附着系数路面高速急转时易发生侧翻事故,在低附着系数路面急转易发生侧滑失稳事故,且单一控制器在不同附着系数路面适应性较差等问题,根据独立驱动电动汽车特点设计了基于分层式结构的稳定性集成控制器。建立了整车动力学模型,并进行了车辆状态参数估计;设计了稳定性集成控制器的控制策略,对车辆的侧倾、横向稳定性状态判定条件和协调策略的制定进行了研究,分别设计了侧倾稳定性控制器和横向稳定性控制器;设置了路面附着系数0.9到0.2的对接路面仿真工况,并在此工况下对所设计的控制器的控制性能进行了仿真测试。结果表明,所设计的稳定性集成控制器相比于单一控制器具有更好的适应性,可有效降低车辆高速行驶过程中的横向载荷转移系数、质心侧偏角等状态量,提高车辆行驶的稳定性和安全性。     

基于微分几何的四轮独立驱动车辆运动解耦控制研究

针对车辆在纵向运动和横摆运动时的强耦合关系给车辆动力学控制带来的困难，以四轮独立电驱动车辆作为研究对象，基于微分几何理论设计了车辆系统运动解耦控制方法，将非线性强耦合的四轮驱动车辆动力学系统解耦为纵向和横向两个相对独立运动控制子系统，并设计了鲁棒控制器，以提高抵抗车辆行驶时不确定外力如侧风的干扰能力。基于 Trucksim 软件建立四轮驱动车辆模型，并针对车辆解耦控制策略和抗干扰策略进行了仿真测试。结果表明，相比于无解耦控制的车辆，采用微分几何解耦控制的四轮独立驱动车辆纵向速度偏差降低了 82.1%，横摆角速度偏差降低了80.7%，且微风干扰下的抗干扰能力明显改善，车辆稳定性显著提升。为验证该运动解耦控制策略在实时系统中的控制效果，还进行了硬件在环试验，结果表明，硬件在环试验的结果与仿真结果一致。     

Robust control for 4WS vehicles considering a varying tire-road friction coefficient

A µ-synthesis for four-wheel steering (4WS) problems is proposed. Applying this method, model uncertainties can be taken into consideration, and a µ-synthesis robust controller is designed with optimized weighting functions to attenuate the external disturbances. In addition, an optimal controller is designed using the well-known optimal control theory. Two different versions of control laws are considered here. In evaluations of vehicle performance with the robust controller, the proposed controller performs adequately with different maneuvers (i.e., J-turn and Fishhook) and on different road conditions (i.e., icy, wet, and dry). The numerical simulation shows that the designed µ-synthesis robust controller can improve the performance of a closed-loop 4WS vehicle, and this controller has good maneuverability, sufficiently robust stability, and good performance robustness against serious disturbances.     

车辆转向与驱动综合控制及横向速度观测器的设计

为了实现复杂工况下车辆自动跟踪控制,建立了纵横向耦合车辆模型,研究了车辆在弯道变速行驶工况的动力学耦合控制问题,根据滑模控制以及动态表面控制理论,提出了一种基于车辆转向与驱动控制的综合控制器,并针对横向车速不可测,设计了横向速度观测器。仿真结果表明该综合控制器具有良好跟踪性能,在复杂工况下表现出较好的动、静态特性。     

车-车协同下无人驾驶车辆的换道汇入控制方法

多车协同驾驶是智能车路系统领域的研究热点之一,可有效降低道路交通控制管理的复杂程度,减少环境污染的同时保障道路交通安全。基于多车协同驾驶控制结构,提出了一种无人驾驶车辆换道汇入的驾驶模型及策略,系统分析了多车协同运行状态的稳定条件。在综合分析无人驾驶车辆换道汇入的协作准则、安全性评估后,基于高阶多项式方法,结合车辆运行特性,通过引入乘坐舒适性的指标函数,设计得到无人驾驶车辆换道汇入的有效运动轨迹。通过研究汇入车辆与车队中汇入点前、后各车辆的运动关系,详细分析车辆发生碰撞的类型和影响因素,给出避免碰撞的条件准则,从而确保无人驾驶车辆汇入过程中多车行驶的安全性和稳定性。基于车辆运动学建立车辆位置误差模型,结合系统大范围渐进稳定的条件,选取线速度和角速度作为输入,应用李雅普诺夫稳定性理论和Backstepping非线性控制算法,设计了无人驾驶车辆换道汇入后的路径跟踪控制器。仿真试验和实车试验结果表明：所设计的换道汇入路径是可行、安全的,控制器具有良好的跟踪效果,纵向和横向的距离误差在15 cm以内,方向偏差的相对误差在10%以内。研究结果为智能车路系统中的多车状态变迁与协同驾驶研究提供了参考,可服务于未来道路交通安全设计和评价。     

防抱死制动系统模糊自学习控制研究

由于车辆参数和运行工况的复杂多变，针对特定参数和路面条件所设计的防抱死制动系统往往难以适应。为解决这一问题，文中首先建立了带有盘式制动器的双轮车辆直线制动系统的数学模型；而后提出了模糊自学习控制策略，该方案通过引入模糊学习机制以调整模糊控制器的规则集，可使车辆对象输出跟踪理想参考模型的输出；接着对所设计控制算法在不同路面条件下进行了性能模拟；最后开发了模糊自学习微控制器，基于硬件在环仿真技术，对设计控制器的性能进行了实验验证。     

Semi-active control of tracked vehicle suspension incorporating magnetorheological dampers

In past years, the application of magnetorheological (MR) and electrorheological dampers in vehicle suspension has been widely studied, mainly for the purpose of vibration control. This paper presents theoretical study to identify an appropriate semi-active control method for MR-tracked vehicle suspension. Three representative control algorithms are simulated including the skyhook, hybrid and fuzzy-hybrid controllers. A seven degrees-of-freedom tracked vehicle suspension model incorporating MR dampers has been adopted for comparison between the performance of the three controllers. The model differential equations are derived based on Newton's second law of motion and the proposed control methods are developed. The performance of each control method under bump and sinusoidal road profiles for different vehicle speeds is simulated and compared with the performance of the conventional suspension system in time and frequency domains. The results show that the performance of tracked vehicle suspension with MR dampers is substantially improved. Moreover, the fuzzy-hybrid controller offers an excellent integrated performance in reducing the body accelerations as well as wheel bounce responses compared with the classical skyhook and hybrid controllers.     

Real-time model predictive control of connected electric vehicles

ABSTRACT

Electric Vehicles (EVs) motors develop high torque at low speeds, resulting in a high rate of acceleration with the added advantage of being fitted with smaller gearboxes. However, a rapid rise of torque in EVs fitted with central drive powertrains can create undesired torsional oscillations, which are influenced by wheel slip and flexibility in the halfshaft. These torsional oscillations in the halfshaft lead to longitudinal oscillations in the vehicle, thus creating problems with regard to comfort and drivability. The significance of using wheel slip in addition to halfshaft torsion for design of anti-jerk controllers for EVs has already been highlighted in our previous research. In this research, we have designed a look-ahead model predictive controller (LA-MPC) that calculates the required motor torque demand to meet the dual objectives of increased traction and anti-jerk control. The designed LA-MPC will improve drivability and energy consumption in connected EVs. The real-time capability of the LA-MPC has been demonstrated through hardware-in-the-loop experiments. The performance of the LA-MPC has been compared to other controllers presented in the literature. A validated high-fidelity longitudinal-dynamics model of the Rav4EV, which is the test vehicle of our research has been used to evaluate the controller.     

考虑道路因素的智能车辆纵向运动决策与控制研究

针对智能车辆纵向运动时的交通道路适应性问题,考虑路面附着系数和前车运动速度等因素,研究了智能车辆纵向运动决策与控制方法。论文研究了基于车头时距的纵向运动决策方法并建立不同驾驶行为的目标车速模型,运用变论域模糊推理算法设计了目标加速度模型。基于纵向动力学模型,运用自适应反演滑模控制算法建立了驱动控制器和制动控制器。对高附着系数路面和低附着系数路面的行驶工况进行仿真试验验证,结果表明,在不同的附着系数路面和前车变速行驶条件下,智能车辆能实时、合理地决策目标车速、目标加速度,实现安全、高效、稳定的跟驰。     

Vehicle dynamics control by using a three-dimensional stabilizer pendulum system

Active safety systems of a vehicle normally work well on tyre–road interactions, however, these systems deteriorate in performance on low-friction road conditions. To combat this effect, an innovative idea for the yaw moment and roll dynamic control is presented in this paper. This idea was inspired by the chase and run dynamics animals like cheetahs in the nature; cheetahs have the ability to swerve while running at very high speeds. A cheetah controls its dynamics by rotating its long tail. A three-dimensional stabilizer pendulum system (3D-SPS) resembles the rotational motion of the tail of a cheetah to improve the stability and safety of a vehicle. The idea has been developed in a stand-alone 3D stabilizer pendulum system as well as in an integrated control system, which consists of an ordinary differential braking direct yaw control (DYC) and active steering control that is assisted by the 3D-SPS. The performance of the proposed 3D-SPS has been evaluated over a wide range of handling manoeuvres by using a comprehensive numerical simulation. The results show the advantage of 3D-SPS over conventional control approaches, which are ineffective on low-friction road conditions and high lateral acceleration manoeuvres. It should however be noted that the best vehicle dynamics performance is obtained when an integrated 3D-SPS and DYC and AFS is utilised.     

Handling stability improvement through robust active front steering and active differential control

The design of the integrated active front steering and active differential control for handling improvement of road vehicles is undertaken. The controller design algorithm is based on the solution of a set of linear matrix inequalities that guarantee robustness against a number of vehicle parameters such as speed, cornering and braking stiffnesses. Vehicle plane dynamics are first expressed in the generic linear parameter-varying form, where the above-stated parameters are treated as interval uncertainties. Then, static-state feedback controllers ensuring robust performance against changing road conditions are designed. In a first series of simulations, the performance of the integrated controller is evaluated for a fishhook manoeuvre for different values of road adhesion coefficient. Then, the controller is tested for an emergency braking manoeuvre executed on a split-μ road. In all cases, it is shown that static-state feedback controllers designed by the proposed method can achieve remarkable road handling performance compared with uncontrolled vehicles.     

车辆悬架的最优自适应与自校正控制

本文研究了车辆主动悬架自适应与自校正控制的策略与算法。     

面向全矢量线控车辆极限运动的分层式协同控制

装配四轮分布式驱动-转向（4WID-4WIS）底盘的全矢量线控车辆具备多可控自由度、高速稳定性强的特点,是极限工况稳定裕度和安全性较高的理想车型。为了解决全矢量线控车辆在极限工况下纵横向控制冲突危害行车安全的问题,提出一种基于模型预测控制 （MPC） 的分层式车辆纵向和横向运动协同控制方法。建立基于单轨模型的期望运动状态识别方法,设计模型预测控制器转换动力学目标,采用泰勒展开和前向欧拉方法对预测模型进行线性离散化处理;设计基于负荷率的轮胎力优化分配方法,利用反正切轮胎逆模型求解控制执行量。仿真结果表明,协同控制方法能显著提高车辆在不同路面下的极限运动稳定性,更精准地跟踪期望运动状态,扩大稳定裕度,保障行车安全。