2013年1-8月全国商用车市场销售统计图表

This is a statistical chart of sales of commercial vehicles across China from Jan. to Aug. in 2013. All numbers and figures are collected from ＂News of Sales and Production of China Auto Industry＂, and all kinds of commercial vehicles, including trucks, coaches and other segments are included in this chart.     

2008年1—6月全国商用车市场销售统计图

This is a statistical chart of sales of commercial vehicles across China from Jan. to June in 2008. All numbers and figures are collected from ＂News of Sales and Production of China Auto Industry＂, and all kinds of commercial vehicles, including trucks, coaches and other segments are included in this chart.     

A research into the application of the production capacity of passenger and light commercial vehicles in China

1. An overall judgment on the situation 2006 saw the rapid growth of passenger vehicles, with the production capacity putting into use rose from less than 70 percent to around 80 percent. That with light commercial vehicles was similar too. The situation in 2005 and 2006 showed that there are no evidential overdone production capacity.     

Current Problems of China’s Special Purpose Vehicles

There are now 35 percent special purpose vehicles in China, compared to 80 percent in the advanced countries. A report made by CAAM in 2004 stated that there are 620 special purpose vehicle makers in China and they will produce a total of 1,500 kinds and 700,000 vehicles in 2005. 1. Unable to develop hi-tech products and key parts are dependent on import As most of the vehicles can not find wide use in the market, they demand huge money in developing. As a result, a lot of makers have to co…     

The status quo of special vehicle sector in China

I. Definitions of special vehicles (SP) and retrofitted-vehicles The special vehicles in China are mainly fabricated by the so-called retrofitters. That is because in the management method in the past, vehicle manufacturers are classified into producers and retrofitters in terms of production power and whether the vehicles are reprocessed on the chassis made by other producers. Vehicle production enterprises refer to those who are qualified of development, OEM supplying, production capability and can produce complete vehicles one time. Retrofitters refer to those who mainly conduct reprocessing on purchased chassis for making complete vehicles.     

2010年1-7月全国汽车分车型销售及构成情况

This is a record of auto sales all over China market from Jan.to Jul.in 2010,categorized by models of whole vehicles and engine models.     

General Aspects of Auto Lamp Sector

Ⅰ. Auto Lamp Market According to incomplete statistics, there are nearly 100 lamp manufacturers in China at present, mainly supplying for domestic motor vehicles, motorcycles and rural transporters, most of which are of small scale and low level in production. With the development of auto industry, es     

A ROUGH PICTURE OF CHINA''''S AUTO TURBOCHARGER PRODUCTION

1. General China's development of ICE turbocharging technology started in 1958. Today in China the auto turbocharger is mainly used on heavy and medium diesel engined vehicles. Some light diesel engined vehicles also adopt turbochargers, e.g., Nanjing IVECO light vehicle is equipped with 8140 turbocharged diesel engine and light vehicle of Dongfeng Motor Co. (DFMC) are e     

Dongfeng has fixed a sales goal of 80 billion yuan supported by Nissan

The Nissan and Dongfeng Group-based Dongfeng Automobile Co., Ltd, which has the largest investment in the history of the industry, opened officially for business on July 1. With a total investment of USD 2 billion and 70,000 employees, the company is the first joint venture in China which plans a full range of truck, light commercial and passenger vehicles. According to president Nakamura, the company has established a management     

SUGGESTIONS FOR UNDERSTANDING CHINESE REALITY

Someone has said China is the only big potential market of vehicles in the world. Just because of this reason, the associations between the auto circles of China and other countries are becoming more and more frequent than ever before. As an official with CNAIC formerly and with AIB now,I have had the opportu     

东海大桥陆上段基础持力层均匀性分析设计

东海大桥陆上段约长 2 .4km,为 4～ 6跨一联的 PC连续梁桥 ,基础持力层取 71-2 层 ,即灰黄色粉砂层 ,根据地质钻孔资料综合分析 ,认为持力层以上的 71-1,即草黄色砂质粉土较均匀 ;71-2 层的标准贯入度 N63 .5及比贯入阻力 Ps的变异系数 δ较大 ,反映了持力层较大的不均匀性 ,在沉桩施工中则出现相应不规则的断续分布、突发性较大变化。对此 ,设计采取了相应的应对措施 ,并与管理、施工等有关部门密切联系协作 ,及时妥善处理     

客车漆膜起泡问题机制分析与探讨

某公司近日接到一批公交车订单,油漆产品由底至面全部采用公交公司指定用漆,车辆下线经雨淋曝晒后整车漆面出现不同程度的起泡问题。通过对起泡处的漆面作破坏性的断层剖解,发现起泡的位置主要集中于漆膜最底层的基材表面,且镀锌板、拉延板、铝板等     

卢浦大桥引桥T梁设计

本文介绍了卢浦大桥引桥 T梁构造形式、跨径布置 ,并对不同跨径、不同桥宽的 T梁进行了设计分析     

汽车起重机:旋转减速器壳和转台底板连接内螺纹孔磨损后的修复

我们单位有几十辆用了20多年的大型汽车起重机.由于使用年头已久,一些起重机的旋转减速器与转台底板连接的内螺纹孔出现不同程度的磨损.     

盾构掘进机刀盘研制实例

刀盘是盾构机中的重要部件，具有开挖地层、稳定开挖面、搅拌碴土等功能，处于盾构机与地质状态紧密关联的最前沿。文章通过对刀盘研制实例的剖析，简单介绍了刀盘设计的基本方法、刀盘的制造工艺以及刀盘样机在工业性试验中所取得的成果。     

钻孔灌注桩施工事故的防治

在溶洞发育的石灰岩地区进行桩基础的施工 ,各种事故的发生机率是比较高的。广肇高速公路新兴江大桥桥址属于石灰岩地区 ,桩基施工前后历时一年半 ,该桩基施工的事故具有典型性。对本工程施工所遇事故的成因及所采取的处理方法进行了简要的介绍     

车辆下线检测系统的开发

该车辆下线检测系统能够自动识别某汽车所采用的发动机ECU、AT和AMT变速器TCU、整车防盗设备IMMO、乘员保护系统SRS及ABS防抱刹车系统控制单元的型号,并采用虚拟仪器技术,实现各种电控单元的故障诊断、实时参数测量和执行器测试等功能。此检测系统在该汽车生产线上的应用表明,其可作为车辆下线前车载电子器件是否正常工作的判断依据,并可同时提供车辆车况跟踪、统计和分析的实测数据。     

东莞市石龙镇南三桥主桥V型墩连续刚构设计

东莞市石龙镇南三桥主桥为40m+2×73.5m+40m预应力砼V型墩连续刚构桥,属于较小跨径的V型墩刚构桥,其结构设计、计算分析均有独特之处.简要介绍东莞市石龙镇南三桥主桥的结构设计特点,总结设计体会.     

2015年5月交通运输运行分析

5月,公路建设完成投资4601亿元,增长13．4％;公路货运量增长7.7％,回升2．4百分点;公路客运量下降1．2％。