共查询到19条相似文献,搜索用时 218 毫秒
1.
2.
3.
4.
5.
本文中将机械创新性设计方法应用于单电机并联混合动力传动系统的结构分析,以拓展混合动力汽车传动系统的结构。首先分析两种具有代表性的单电机并联混合动力汽车的传动结构,得到其机械拓扑结构。通过机械创新性设计方法,应用一般化规则得到机械拓扑结构的运动链,根据其运动链构件和运动副的数目得到一般化运动链。采用特定化程序,从一般化运动链图找出满足设计约束的可行特定化运动链图谱,除去同构类型后得到12种可行特定化运动链,利用具体化规则转换为相应的行星轮系的机构简图。通过动力输入输出分配与运行模式分析,最终获得132种单电机并联混合动力汽车传动系统的可行结构。选取其中一种新构型,分析其6种基本运行模式下的能量流动,得到15种离合器与制动器的状态组合,验证了将机械创新方法应用于混合动力传动系统结构设计的可行性。 相似文献
6.
针对目前国内混合动力汽车传动系统的局限性,提出了结合行星机构的动力耦合功能和无级变速器的连续速比调节特性的新型混合动力汽车传动系统方案,运用模拟杠杆法确定了4种结构紧凑、能满足混合动力汽车多种工作模式需要的新型传动系统.分析了新型传动系统在汽车各种行驶工况下的多种工作模式及其动力传递路线和在各工作模式下的耦合特性,为整车控制策略的制定和传动系统的参数匹配与仿真奠定基础.与丰田THS、通用TWO-MODE系统进行对比分析的结果表明,新型传动系统具有结构简单、控制方便和传动效率高等优点. 相似文献
7.
并联式混合动力电动汽车动力总成控制策略的研究 总被引:6,自引:0,他引:6
在混合动力电动汽车中,制定合适的控制策略和控制逻辑是优化能量流动、提高动力总成协调程度的核心,是并联式混合动力汽车具有优良的经济性与排放性能的保证。本文综合分析了并联式混合动力汽车动力总成控制的几种典型控制策略,介绍了基本思想、实现方法以及各自特点,并对各种控制策略的控制效果进行了评价和分析。 相似文献
8.
9.
10.
11.
太阳能混合动力电动汽车驱动系统及模糊控制 总被引:1,自引:0,他引:1
能源危机和环境污染是当今世界面临的两大问题,太阳能电动车将对解决面临的能源危机和环境污染具有重大意义。受技术和天气因素的影响,需要将其和传统的发动机结合成混合动力电动汽车。文章对太阳能动力电动汽车驱动系统进行简要设计,并对其控制策略进行简要分析,提出了一种变结构模糊控制系统。 相似文献
12.
B. Suh A. Frank Y. J. Chung E. Y. Lee Y. H. Chang S. B. Han 《International Journal of Automotive Technology》2011,12(1):131-139
This research concerns the design of a powertrain system for a plug-in parallel diesel hybrid electric bus equipped with a
continuously variable transmission (CVT) and presents a new design paradigm for the plug-in hybrid electric bus (HEB). The
criteria and method for selecting and sizing powertrain components equipped in the plug-in HEB are presented. The plug-in
HEB is designed to overcome the vulnerable limitations of driving range and performance of a purely electric vehicle (EV),
and it is also designed to improve the fuel economy and exhaust emissions of conventional buses and conventional HEBs. Optimization
of the control strategy for the complicated and interconnected propulsion system in the plug-in parallel HEB is one of the
most significant factors for achieving higher fuel economy and lower exhaust emissions in the hybrid electric vehicle (HEV).
In this research, the proposed control strategy was simulated to prove its validity using the ADVISOR (advanced vehicle simulator)
analysis simulation tool. 相似文献
13.
B. Suh A. Frank Y. J. Chung E. Y. Lee Y. H. Chang S. B. Han 《International Journal of Automotive Technology》2010,11(4):555-563
This research is the first to develop a design for a powertain system of a plug-in parallel diesel hybrid electric bus equipped
with a continuously variable transmission (CVT) and presents a new design paradigm of the plug-in hybrid electric bus (HEB).
The criteria and method for selecting and sizing powertrain components equipped in the plug-in HEB are presented. The plug-in
HEB is designed to overcome the vulnerable limitations of driving range and performance of a purely electric vehicle (EV)
and to improve fuel economy and exhaust emissions of conventional bus and conventional HEBs. The control strategy of the complicated
connected propulsion system in the plug-in parallel HEB is one of the most significant factors in achieving higher fuel economy
and lower exhaust emissions of the HEV. In this research, a new optimal control strategy concept is proposed against existing
rule-based control strategies. The optimal powertrain control strategy is obtained through two steps of optimizations: tradeoff
optimization for emission control and energy flow optimization based on the instantaneous optimization technique. The proposed
powertrain control strategy has the flexibility to adapt to battery SOC, exhaust emission amount, classified driving pattern,
driving condition, and engine temperature. The objective of the optimal control strategy is to optimize the fuel consumption,
electricity use, and exhaust emissions proper to the performance targets. The proposed control strategy was simulated to prove
its validity by using analysis simulation tool ADVISOR (advanced vehicle simulator). 相似文献
14.
15.
相比传统汽车,混合动力车驱动系统更加复杂,具有多个能量源,其能量流具有多路特性,所以在其控制中,及时获得相关数据,并对数据进行完整的分析显得尤为重要。能流图作为统计数据的整理和分析工具,目前已在很多能源领域得到广泛应用,但在汽车上的应用尚少。本文参照当前国际上普遍采用的能流图结构,以从实际运行的混合动力车上采集的数据,绘制典型的混合动力车的能流图,并予以分析。该方法已成功应用于国内某混合动力车。 相似文献
16.
对电动汽车电动机、传动系的传动比和电池组容量等参数设计的原则和方法进行了研究,以某种型号电动汽车为研究对象,对其动力传动系的参数进行合理的选择和设计.建立了整车动力传动系统的仿真模型,应用电动汽车仿真软件ADVISOR对整车动力性进行了仿真计算.仿真结果表明,以铅酸电池为能源的电动汽车的加速性、爬坡能力、最大车速、续驶... 相似文献
17.
随着国家排放节能减排要求愈发严格,汽车发展日趋电动化,越来越多的传统汽车厂家都选择在当前传统车平台上开发混合动力汽车作为纯电动汽车的过渡车型.混合动力汽车的电池为动力电池,由于电池容量小放电倍率高,如不进行主动冷却导致电池的温度急剧攀升.本文主要介绍一种比较先进的电池包双冷却液冷系统设计理念,通过对比当前市场常见风冷系... 相似文献
18.