共查询到20条相似文献,搜索用时 78 毫秒
1.
2.
3.
4.
非线性有限元方法是分析船舶碰撞和搁浅问题的一个强有力工具,但是数值模拟结果的可靠性很大程度上依赖于对工程问题的恰当处理和有限元软件中主要参数的准确控制.本文以某单壳船底结构准静态座礁实验结果为例,用非线性有限元软件LS-DYNA进行数值模拟,研究了下列选择参数对单壳船底结构抗撞性的影响:边界条件;船底结构的材料模型;壳单元类型;船底结构与礁石模型之间的摩擦系数;船底结构的残余应力.通过比较计算结果的碰撞力曲线,能量吸收曲线来评价这些参数对数值模拟的影响并给出了一些建议. 相似文献
5.
6.
7.
8.
为了能准确、快速分析和预测复杂鼓式制动器结构的动态特性,采用动态子结构综合法-阻抗法对其模态特性进行了研究.基于动态子结构综合法-阻抗法推导了复杂结构动态响应特性关系式,计算了鼓式制动器的模态参数,比较了采用动态子结构综合法和有限元法计算制动鼓的响应时间.结果表明:采用动态子结构综合法-阻抗法是准确、高效的,既能准确计算制动鼓的模态特性,又能快速预测其动态响应特性. 相似文献
9.
10.
为研究大体积混凝土水化热的温度变化规律及其对温度裂缝产生的影响,对在建船闸进行有限元仿真分析并对埋设温度计进行监控.通过对比分析有限元计算结果和实测温度结果,得到两者存在差异的可能原因.通过对放热函数及强度调整函数的参数设置调整,使计算结果更接近工程实际情况.在有限元分析结果的基础上,通过裂缝指数来评价船闸主体结构温度裂缝产生的可能性,在对放热函数及强度调整函数进行调整后,计算结果表明结构出现温度裂缝的可能性在5%以下,与主体结构外观情况相符.对比分析不同规范对温度应力计算规定的异同,以期为相关计算选择适用规范及互通有无提供参考依据. 相似文献
11.
《船舶与海洋工程学报》2014,(2)
正In the paper"Influence of Fouling Assemblage on the Corrosion Behaviour of Mild Steel in the Coastal Waters of The Gulf of Mannar,India"in Vol.12,No.4,Page:509,References were lost,and the two authors’biographies were identical.The correct text is shown below.We apologize to the authors and our readers for any inconvenience caused by the errors. 相似文献
13.
《船舶与海洋工程学报》2014,(4)
正St.John's,Newfoundland,Canada,May 31-June 5,2015 OMAE2015 is the ideal forum for researchers,engineers,managers,technicians and students from the scientific and industrial communities from around the world to: meet and present advances in technology and its scientific support; 相似文献
14.
联合作战计划和执行系统 总被引:2,自引:1,他引:1
全球指挥控制系统(GCCS)实施当前美国海军网络中心战信息基础设施的联合计划网络。联合作战计划和执行系统(JOPES)支持GCCS实现联合计划。JOPES有两类计划:时间不限的精密预案计划生成作战计划、方案计划或职能计划;时间敏感的危机行动计划生成作战命令或战役方案。前者在和平时期创建的作战计划是后者的计划基础,加速应付危机的能力。 相似文献
15.
In terms of equal sailing distances, where is the inflexion when ships depart from ports in the Asian Continent to New York via Suez and/or Panama?
The answer is China South Port Group (Hong Kong, Shenzhen and Guangzhou). 相似文献
The answer is China South Port Group (Hong Kong, Shenzhen and Guangzhou). 相似文献
16.
Recent measurements of wave induced hull strain and flexure in RN warships are presented together with the derivation of the current design criteria for extreme hull girder bending loads. The history of the development of the shipboard instrumentation used is given and recent developments to improve the quality and ease of analysis of the data are described. An unexpectedly high transverse asymmetry in the longitudinal strains measured in destroyers is shown to be the result of a combination of vertical and lateral bending in oblique seas. Finally recent theoretical comparisons between the loading of Deep-Vee hulls and conventional UK rounded bilge hulls are presented which demonstrate the higher loading experienced by this type of hull form. 相似文献
17.
桥梁防撞设施物理模型试验 总被引:1,自引:0,他引:1
物理模型试验是预报防撞设施所受撞击力及优化设计方案的主要方法之一。结合杭州湾大桥柔性防撞设施及东海大桥独立式防撞体设计方案,阐述了船—防撞体撞击试验的基本原理、方法、试验方案及相关试验结果。提出了柔性防撞系统的优化方案。试验结果表明,该方案经济有效,可供预报类似桥梁防撞设施撞击力时参考。 相似文献
18.
印尼某电厂项目码头水工建筑物包括码头、防波堤和护岸等主要组成部分。在该项目水工建筑物的设计过程中,综合考虑当地的自然条件、施工能力和材料来源等因素,不断优化结构选型和结构断面。根据不同使用要求,护岸分别采用直立式和斜坡式2种结构型式,推荐的设计方案节省投资、施工方便,可供同类工程设计参考。 相似文献
19.
Gunnar Alexandersson Staffan Hultén Frode Longva 《Research in Transportation Economics》2010,29(1):212-218
Despite the many socio-economic similarities between Sweden and Norway, differences in jurisdiction, organisation, cooperation, and financing of long-distance passenger train and coach services have led to the development of four distinctively different ways of serving the markets. This paper describes how the train and coach markets have developed in the two countries, with emphasis on regulatory and industrial structure and a couple of performance variables.Looking at passenger rail, both countries separated infrastructure from operation over a decade ago. However, while Norwegian rail is characterised by an almost monopoly supplier, rail services in Sweden are partly decentralised to the responsibility of county authorities and are widely subjected to competitive tendering. The rest of the network is about to be opened up for on-the-track competition. Swedish Rail (SJ) has spent the last decades consolidating its core business (passenger rail) and sold out its other businesses. In contrast, the Norwegian state rail (NSB) has expanded its business to become a major bus operator and property owner, with extensions also into the Swedish market.The coach industry was more recently deregulated in both countries. The Swedish coach market is dominated by privately owned companies operating services to and from Stockholm. In Norway, state-owned NSB is a major coach operator on medium distance routes, and is also the largest partner of Nor-Way Bussekspress which totally dominates long-distance coach services. Further, the Norwegian coach market is characterised by cross-ownership and cooperation which has enabled an extensive route network which covers most of Norway.We find distinct differences in achievements in the two modes and in the two countries. Swedish rail services have succeeded in winning market shares and in renewing and developing both infrastructure and service levels to a greater extent than the Norwegian model. On the other hand, the Norwegian coach market seems to be more developed and efficient compared to its Swedish counterpart.The paper concludes with a discussion on the possible links between the different approaches and the performance observed, with the aim to stimulate further and more detailed research on some important issues. 相似文献