共查询到20条相似文献,搜索用时 62 毫秒
1.
柴油高压共轨式喷油系统于1990年代中后期才正式进入实用化阶段。这类电控系统可分为三类,蓄压式电控燃油喷射系统、液力增压式电控燃油喷射系统和高压共轨式电控燃油喷射系统。柴油高压共轨系统可实现在传统喷油系统中无法实现的一些功能, 相似文献
2.
3.
燃油喷射系统是柴油机中最重要的子系统,为满足柴油机的多用途需求,必须开发出高性能的燃油喷射系统。以柱塞式燃油喷射装置和共轨燃油喷射装置的结构、特点及功能为着眼点,介绍柴油机燃油喷射装置的技术发展动向,并以电磁阀式喷油器为例,阐述了材料技术的发展为先进的共轨喷油系统实现高压喷射与多次喷射功能提供了有力的技术支持。 相似文献
4.
5.
为满足未来严格的排放法规的要求,共轨式电控燃油喷射系统应用到柴油机是未来发 重要趋势。本文阐述了其现状和发展,重点介绍了典型的几家大公司的共轨式电控燃油喷射系统的研究现状及其发展。 相似文献
6.
7.
8.
现有电控共轨式燃油喷射系统有共轨蓄压式、共轨液压式和高压共轨式三种。其特点是通过高压共轨、共轨蓄压或液力增压形成高压,用电磁阀控制喷油过程。它有高压燃油泵、共轨油管、高压油管、喷油器、电控装置、各种传感器和执行器等组成。 相似文献
9.
柴油机共轨电控燃油喷射技术 总被引:1,自引:0,他引:1
电子控制技术是车用柴油机燃油喷射系统发展的必然趋势,而目前开发的共轨电控燃油喷射系统是发展的主流,其分为高压共轨系统和中压共轨系统两类,本文介绍该两类系统的基本结构和原理,并阐述共轨系统的现状及发展方向。 相似文献
10.
燃油混合气制备装置是准确提供和计量燃烧所需燃油量的系统.具体任务包括:◆提供所需压力◆喷射所需燃油量(调节燃油量)◆调节所需喷射开始时间(调节喷射开始时间)为了满足更严格的柴油发动机排放限值,现代化喷射系统要确保更高的压力和更准确的喷射.共轨系统可充分满足这些要求.在共轨系统中,燃油以高压形式存储在共轨内并通过喷射器以根据特性曲线控制方式喷入燃烧室内. 相似文献
11.
12.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(4):573-596
An existing driver–vehicle model with neuromuscular dynamics is improved in the areas of cognitive delay, intrinsic muscle dynamics and alpha–gamma co-activation. The model is used to investigate the influence of steering torque feedback and neuromuscular dynamics on the vehicle response to lateral force disturbances. When steering torque feedback is present, it is found that the longitudinal position of the lateral disturbance has a significant influence on whether the driver’s reflex response reinforces or attenuates the effect of the disturbance. The response to angle and torque overlay inputs to the steering system is also investigated. The presence of the steering torque feedback reduced the disturbing effect of torque overlay and angle overlay inputs. Reflex action reduced the disturbing effect of a torque overlay input, but increased the disturbing effect of an angle overlay input. Experiments on a driving simulator showed that measured handwheel angle response to an angle overlay input was consistent with the response predicted by the model with reflex action. However, there was significant intra- and inter-subject variability. The results highlight the significance of a driver’s neuromuscular dynamics in determining the vehicle response to disturbances. 相似文献
13.
预应力曲线箱梁和异形箱梁的研究 总被引:7,自引:0,他引:7
近年来 ,国内外学者对曲线箱梁和异形箱梁的静力分析理论和计算方法作过大量的研究 ,但这些理论和方法在某种程度上都存在着一定的局限性 ,特别是在实际设计工作中 ,运用起来不能得心应手。为此本文在综合前人已取得经验下 ,针对桥梁结构设计中分析曲线箱梁、异形箱梁 ,经常遇到的难题进行了研究 ,建立一个较为完善的理论和方法 ,编制了等参元空间分析程序。在实际工程中进行实桥试验 ,验证了本文理论和方法的正确性。本文的研究工作更准确描述了箱梁的荷载响应 ,为设计人员提供直观的设计依据。对曲线箱梁和异形箱梁受力特性有了更一步的理解 ,并提出了新的见解 相似文献
14.
混凝土的推广使用已有一个世纪,目前在现代工程建设中仍占有重要的地位。而在今天,混凝土的裂缝较为普遍,在桥梁工程中裂缝几乎无所不在,尽管我们在施工中采取各种各样的措施,但收效甚微,裂缝仍然时有出现。该文指出,究其原因,人们对混凝土温度变化所产生的应力注意不够是其中之一,尤其是大体积混凝土。对此,温度应力与温度控制具有重要的意义。 相似文献
15.
J. R. Serrano F. J. Arnau V. Dolz A. Tiseira M. Lejeune N. Auffret 《International Journal of Automotive Technology》2008,9(3):277-288
This article presents a two-stage turbocharged heavy-duty diesel (HDD) engine designed to fulfil the US2007 anti-pollution
directive. This directive imposes very restrictive limits on the NOx and particle emissions of HDD engines. In this work,
the possibility of combining particle traps in the exhaust line to reduce soot emissions with very high EGR rates to reduce
NOx emissions is considered. This new generation engine implements two-stage turbocharging in order to improve the bsfc when
the engine is working on steady conditions as well as to optimize the engine transient response. After carrying out the tests,
the results were analyzed and the engine settings were adjusted to maximise its behaviour and minimise pollutant emissions.
NOx and soot emission peaks were also analyzed at engine transient conditions in order to keep them under certain levels,
and thus maintain the overall pollutant emissions to a level that is as low as possible. In summary, a double-stage turbocharging
configuration can greatly improve engine driveability (between 23% and 36% depending on engine speed), while reducing NOx
emissions during transient evolution without increasing opacity peaks beyond the stated limits. 相似文献
16.
17.
该文从研究超薄磨耗层的级配的选择入手,简单分析了超薄磨耗层的结构特点和强度形成机理,给出了几种国内外常用的超薄磨耗层级配范围,并提出了将SAC-10做为其研究的设计级配。在研究超薄磨耗层沥青混合料配合比设计的基础上,通过对SAC-10沥青混合料的马歇尔试验,确定了该沥青混合料的矿料级配和最佳沥青含量。最后采用车辙试验、浸水马歇尔和冻融劈裂试验及小梁弯曲试验等一系列试验,检测超薄磨耗层沥青混合料的各项路用性能,为在实际工程中的应用提供理论依据。 相似文献
18.
19.
公路工程监理人员市场供需模型研究 总被引:2,自引:0,他引:2
提出了建立监理人员需求和供给模型的方法,推导了计算公式。根据公路建设发展的历史数据,对历年公路建设监理人员需求和供给进行了计算和比较。 相似文献
20.
本文提出一种有效路形测量的新方法,研究轮胎的位移包容性。提出以轮胎包容参数为变量把真实路面功率谱变换为有效路面功率谱的新方法。该研究是道路激励模拟的基础研究。 相似文献