共查询到19条相似文献,搜索用时 224 毫秒
1.
2.
虽然不锈钢的特殊性能是它的耐蚀性,但是这种性质,并不是在任何情况下都会显示出来的.文章从氧化膜理论、钢的组织结构、杂质成分、热处理方法以及不锈钢容器的焊接加工过程出发,分析了造成不锈钢容器腐蚀的内在因素;从其使用环境介质中活性离子影响考虑,分析了造成腐蚀的外在因素,提出不锈钢容器从选材、加工、制造到生产使用全过程的有序控制,提高不锈钢压力容器的耐蚀性,保障寿命期的安全使用. 相似文献
3.
压力容器广泛应用于化工、机械、核能、运输、航空、医药、冶金、海洋、轻工等数十个工业领域,与工业生产和人们生活有着十分密切的关系。压力容器都是在受压状态下工作的,其工作介质多是易燃、易爆、有腐蚀、有 相似文献
4.
5.
[目的]针对某大型压力容器的压力跟踪控制要求,为了满足升压段的快速大流量需求并改善压力容器升压段和降压段的跟踪性能,研发75 m3新型压力容器的内部压力控制系统。[方法]采用高压气水罐作为蓄能器,通过调节蓄能器流入压力容器的液体流量,改变内部压力,实现升压段的精确跟踪;在压力容器出口管路上分别设置流量调节阀和高速电磁开关阀,以提高降压段的跟踪精度;采用带有死区的PID控制算法,补偿相位滞后。[结果]试验结果表明:系统动态跟随精度可保持在0.4 MPa以内,静态保压精度可控制在0.1 MPa,具备良好的跟随性能和稳态控制精度。[结论]在陆上试验模拟潜器大惯性变深应用场景可以有效解决假海背压控制瞬时大流量与压力控制精度无法兼顾的问题。 相似文献
6.
7.
8.
关于海工混凝土耐久性问题的探讨 总被引:1,自引:0,他引:1
海洋环境下的混凝土结构腐蚀现象十分严重,采用高性能混凝土是解决混凝土腐蚀问题的有效措施,控制高性能混凝土的开裂问题是推广应用高性能混凝土的关键.介绍了海工混凝土应用中存在的几个问题及对策措施. 相似文献
9.
从腐蚀防护顶层设计、定量控制、标准规范建设等8个方面分析了当前舰船腐蚀防护工作存在的问题,提出加强认识、重视基础建设、实现规范化管理等解决措施和建议。 相似文献
10.
介绍了美国海军DDG51级“宙斯盾”驱逐舰腐蚀控制大纲的实施过程。对该级舰制定的各种腐蚀控制系统作了详细说明;并对这些防腐系统在实际应用中存在的问题进行了讨论;最后还推荐了未来的舰船防腐设备。 相似文献
11.
混凝土裂缝成因及控制 总被引:1,自引:0,他引:1
针对目前建筑混凝土的裂缝问题,分别从温度应力、原材料质量、收缩形变、钢筋锈蚀以及施工工艺质量几个方面论述了开裂原因,并提出了相应的控制措施。 相似文献
12.
13.
14.
The effects of non-symmetrical corrosion defects (about the major or minor axis of the ellipse) on the collapse modes and collapse pressures of subsea pipelines are studied using the Finite Element (FE) method. The corrosion defects are represented by a groove of a given length, width, and depth which is created by the “element death” technology. Parametric studies are conducted and the influences of corrosion location angle, length, width, and depth on the collapse pressure are discussed. Several significant and interesting results are achieved: (1) The collapse modes are mainly affected by the corrosion location angle, width, and depth; (2) The collapse pressure of a pipe may increase as the corrosion length, width, or depth increases when the corrosion location angle is small; (3) The longer the corrosion length, the larger the effect of corrosion location angle on the collapse pressure; (4) For collapses controlled by corrosion defect (0.3≤h/t ≤ 0.7), the relationship between the collapse pressure and corrosion location angle follows a simple cosine function. For collapses controlled by the ovality (h/t < 0.3), the relationship can be expressed by the combination of straight-line and cosine function. 相似文献
15.
在船闸工程大体积混凝土施工过程中,常使用高大模板,为保证模板的稳固,增加其安全性,现场施工中往往采用斜拉杆对模板加固,并使用发泡剂或者缠绕胶带等进行止浆,然而这种传统的方法往往存在工序复杂、止浆效果不佳、拆模后混凝土外观质量差等缺点。为解决该问题,采用一种基于大体积混凝土高大模板施工的弹性材质止浆垫块,并辅以端头带螺纹的拉杆装置,可有效防止混凝土浆液渗漏,还可为拉杆预留保护层以防止锈蚀。该止浆垫块在现场施工的应用取得了较好成效,在提升施工质量及效率的同时,较大程度改善了混凝土表面外观,可为类似工程的大体积混凝土施工止浆提供参考。 相似文献
16.
文章提出了可以计及局部腐蚀损伤影响的等效层合单元方法,建立了局部腐蚀等效弹性模量计算公式,针对耐压壳体局部腐蚀深度、腐蚀强度、腐蚀范围和初挠度进行了系列稳定性数值计算,通过计算结果的对比分析提出了将局部腐蚀等效为附加多波挠度的稳定性近似计算方法,给出了附加挠度幅值的计算公式,可用于耐压壳体局部腐蚀的稳定性分析。 相似文献
17.
Rigid–plastic solutions for the steady-state, quasi-static buckle propagation pressure in corroded pipelines are derived and compared to finite element predictions (ABAQUS). The corroded pipeline is modeled as an infinitely long, cylindrical shell with a section of reduced thickness that is used to describe the corrosion. A five plastic hinge mechanism is used to describe plastic collapse of the corroded pipeline. Closed-form expressions are given for the buckle propagation pressure as a function of the amount of corrosion in an X77 steel pipeline. Buckles that propagate down the pipeline are caused by either global or snap-through buckling, depending on the amount of corrosion. Global buckling occurs when the angular extent of the corrosion is greater than 90°. When the angular extent is less than 90° and the corrosion is severe, snap-through buckling takes place. The buckle propagation pressure and the corresponding collapse modes also compare well to finite element predictions. 相似文献
18.
针对某2Cr13转动座出现的腐蚀坑现象,从多个角度对产生腐蚀的原因进行了分析,提出了为提高该类转动座在使用环境中的耐蚀性,在冶炼、制造工艺和维护保养等方面可采取的一些改进措施. 相似文献
19.
坑蚀是混凝土钢筋锈蚀的主要形式之一。与钢筋均匀锈蚀相比,钢筋坑蚀具有显著的不确定性和更大的截面损失等特点,对混凝土构件的性能具有一定的影响。借助Monte Carlo模拟,分析了锈蚀钢筋混凝土柱的偏压抗力性能,研究了钢筋坑蚀对混凝土偏压柱承载能力的影响。结果表明,钢筋坑蚀的随机性对柱的可靠性有很大影响,钢筋坑蚀构件承载力的下降速度比均匀锈蚀更快,对柱的耐久性具有潜在危害。 相似文献