Train routing and timetabling problem for heterogeneous train traffic with switchable scheduling rules

This paper proposes a mathematical model for the train routing and timetabling problem that allows a train to occasionally switch to the opposite track when it is not occupied, which we define it as switchable scheduling rule. The layouts of stations are taken into account in the proposed mathematical model to avoid head-on and rear-end collisions in stations. In this paper, train timetable could be scheduled by three different scheduling rules, i.e., no switchable scheduling rule (No-SSR) which allows trains switching track neither at stations and segments, incomplete switchable scheduling rule (In-SSR) which allows trains switching track at stations but not at segments, and complete switchable scheduling rule (Co-SSR) which allows trains switching track both at stations and segments. Numerical experiments are carried out on a small-scale railway corridor and a large-scale railway corridor based on Beijing–Shanghai high-speed railway (HSR) corridor respectively. The results of case studies indicate that Co-SSR outperforms the other two scheduling rules. It is also found that the proposed model can improve train operational efficiency.     

A new approach for improving the performance of freight train timetabling of a single-track railway system

A new approach for improving the performance of freight train timetabling for single-track railways is proposed. Using the idea of a fixed-block signaling system, we develop a matrix representation to express the occupation of inter- and intra-station tracks by trains illustrating the train blocking time diagram in its entirety. Train departure times, dwell times, and unnecessary stopping are adjusted to reduce average train travel time and single train travel time. Conflicts between successive stations and within stations are identified and solved. A fuzzy logic system is further used to adjust the range of train departure times and checks are made to determine whether dwell times and time intervals can be adjusted for passenger and freight trains at congested stations to minimize train waiting times. By combining manual scheduling expertise with the fuzzy inference method, timetable efficiency is significantly improved and becomes more flexible.     

Train scheduling simulation that minimises operational conflicts due to service constraints

This paper presents an attempt made to facilitate re‐scheduling of trains to minimize operational delays and accommodate uniform headways for off peak sub urban services subject to resource constraints such as locomotive availability, poor track conditions and stations without siding facilities. The paper describes the computer simulation model designed to optimize train schedules on single‐track rail lines. Using this simulation program it is possible to plan and optimize timetables for railway networks with train runs within short time periods for both single track and double track conditions. The paper describes the capabilities of presenting the results of the simulation runs. These include the time‐distance graph, the network with train movements, dialog boxes with information about selected trains. The programme is capable of changing the starting point, departure time, train destinations and adding or deleting a stop etc. from the user interface. Four objects of array variables are used in the simulation process to keep train and station data. Two object arrays are used for the train movements in up and down directions. The stations' data are stored in the other two object arrays. One of these arrays of stations contains all the stations of the line while the other one contains only the stations with siding facilities. A case study that covers a 61 km long single‐track line with 14 stations is presented to highlight the model capabilities.     

Enhancing intelligent agent collaboration for flow optimization of railroad traffic

Intelligent agents have successfully solved the train pathing problem on a small portion of railroad network [Tsen, 1995, Ph.D. Thesis, Carnegie Mellon University, USA]. As the railroad network grows, it is imperative that the agents collaborate to operate as efficiently as possible. In this paper, the authors demonstrate a collaboration protocol based on a conditional measure of agent effectiveness. Because agent effectiveness is not directly measurable, a suitable metric for agent effectiveness is introduced. Where typically agents run with uniform frequency, the collaboration protocol schedules the agents with a frequency proportional to their expected effectiveness. This protocol introduced a 10-fold improvement in the agent efficiency when tested with a simulation program on a portion of the Burlington Northern railroad.     

Scheduling heterogeneous train traffic on double tracks with efficient dispatching rules

To further improve the utilization rate of railway tracks and reduce train delays, this paper focuses on developing a high-efficiency train routing and timetabling approach for double-track railway corridors in condition that trains are allowable to travel on reverse direction tracks. We first design an improved switchable policy which is rooted in the approaches by Mu and Dessouky (2013), with the analysis of possible delays caused by different path choices. Then, three novel integrated train routing and timetabling approaches are proposed on the basis of a discrete event model and different dispatching rules, including no switchable policy (No-SP), Mu and Dessouky (2013)’s switchable policy (Original-SP) and improved switchable policy (Improved-SP). To demonstrate the performance of the proposed approaches, the heterogeneous trains on Beijing–Shanghai high speed railway are scheduled by aforementioned approaches. The case studies indicate that in comparison to No-SP and Original-SP approaches, respectively, the Improved-SP approach can reduce the total delay of trains up to 44.44% and 73.53% within a short computational time. Moreover, all of the performance criteria of the Improved-SP approach are usually better than those of other two approaches.     

Strategic evacuation planning with pedestrian guidance and bus routing: a mixed integer programming model and heuristic solution

This paper presents a mathematical model to plan emergencies in a densely populated urban zone where a certain numbers of pedestrians depend on transit for evacuation. The proposed model features an integrated operational framework, which simultaneously guides evacuees through urban streets and crosswalks (referred to as “the pedestrian network”) to designated pickup points (e.g., bus stops), and routes a fleet of buses at different depots to those pick‐up points and transports evacuees to their destinations or safe places. In this level, the buses are routed through the so‐called “vehicular network.” An integrated mixed integer linear program that can effectively take into account the interactions between the aforementioned two networks is formulated to find the maximal evacuation efficiency in two networks. Because the large instances of the proposed model are mathematically difficult to solve to optimality, a two‐stage heuristic is developed to solve larger instances of the model. Results from hundreds of numerical examples analysis indicate that proposed heuristic works well in providing (near) optimal or feasibly good solutions for medium‐scale to large‐scale instances that may arise in real transit‐based evacuation situations in a much shorter amount of computational time compared with cplex (can find optimal/feasible solutions for only five instances within 3 hours of running). Copyright © 2016 John Wiley & Sons, Ltd.     

Dynamic blocking for railyards: Part I. Homogeneous traffic

This paper and its companion present a study of railroad classification yard strategies that allow for blocks of destinations to be assigned to classification tracks in different ways, depending on the time of day, week or month. With the same number of tracks, more classifications can be handled by this method. The paper examines homogeneous traffic; that is, traffic patterns where all blocks have the same amount of traffic, where cars for all blocks depart equally frequently from the yard and where the overall traffic flow does not change with time. The results represent the beginning of a better understanding of yard operations, which should be useful for designing new yards, planning expansions of existing ones and evaluating the impact of changes (planned and unplanned) on traffic patterns. The paper concentrates on two sorting strategies: sorting by train (perhaps the most commonly used strategy in the United States today), and triangular sorting. For both strategies, formulas are given for the minimum number of tracks, number of switches and for the total space requirements. For triangular sorting, the yard delay and total space depend on the time chosen between reswitches. These two measures of performance can be reduced if one is willing to accept a sorting effort slightly higher than minimum. The trade-off can be explored numerically. For sorting by train, yard delay and total space are not significantly affected by the sorting method; there is no such trade-off. It appears that sorting by train results in less work, delay and space requirements than triangular sorting, at least in most instances when either could be used. Triangular sorting, however, can be used when there are not enough tracks to allow sorting by train.     

A Value-at-Risk (VAR) approach to routing rail hazmat shipments

Hazardous materials (hazmat) accidents are rare though the consequences could be disastrous. Given the possibility of low probability – high consequence event, a risk-averse routing hazmat shipment is necessary. We propose a value-at-risk (VaR) approach to route rail hazmat shipments, using the best train configuration, over a given railroad network with limited number of train services such that the transport risk as measured by VaR is minimized. Freight train derailment reports of the Federal Railroad Administration were analyzed to develop expressions that would incorporate characteristics of railroad accidents, and then to estimate the different inputs. The proposed methodology was used to study several problem instances generated using the realistic network of a railroad operator, and to demonstrate that it is possible to develop different routes for shipments depending on the risk preference of the decision maker.     

The European freight railway system as a hub-and-spoke network

This paper addresses a hub-and-spoke network problem for railroad freight, where a central planner is to find transport routes, frequency of service, length of trains to be used, and transportation volume. Hub-and-spoke networks, often found in air freight, have not been favoured by railways in the past. Such a structure could be profitable, however, if there exist concentrated freight flows on some service links. We formulate a linear integer programming model whose objective function includes not only the typical operational cost, but also cost due to the transit time spent by freight in the network. We then develop heuristic algorithms to solve large scale instances occurring in rail freight systems in France plus Italy; Germany; and a 10-country European network. By assuming that every node is equipped with consolidation capability, we let the final solution naturally reveal potential hub locations, the impact of several of which is studied by sensitivity analysis.     

Passenger rail in North America in the light of developments in Western Europe and Japan

Because of different geo‐demographic and economic conditions, the impact of the new passenger modes (road and air) on rail travel was much larger in North America than in Europe. In 1960s and 1970s, as the railway share of intercity traffic in North America shrunk to a negligible one or two percent, the passenger trains were abandoned by private railway companies and taken over by state organizations, which have continued to operate traditional trains and generate mounting losses. On the technology side, no attempts have been made to improve competitiveness of trains vis‐a‐vis automobiles and airplanes.

In Europe and Japan, the railways responded to the challenge by (i) upgrading the performance (speed) and comfort of traditional trains operating on existing tracks and (ii) developing trains which could, on short and intermediate range distances, compete successfully, in terms of speed and economy, with the road and air modes. The Japanese (Shinkansen trains) and French (TGV trains) experience clearly shows that trains operating on dedicated lines at average speeds of 150 to 200 km/hr provide a superior transportation service and economy on high‐traffic intercity routes of up to about 500 km length. In this paper the factors responsible for the present status of passenger rail in North America are analysed, the current policies in the U.S. and Canada are evaluated in the light of experience to date and developments abroad, and suggestions for a long‐term passenger rail policy are made. This includes examination of (i) the viability of continued subsidization of traditional train services, (ii) the viability of operation of faster trains on existing tracks, (iii) the scope for introduction of modern, fast trains on dedicated lines in high‐density, intercity corridors, (iv) the application of fast trains as access to major airports and integration of airports with fast intercity lines, and (v) the impact of energy (oil) consumption in transportation.

     

Simultaneous passenger train routing and timetabling using an efficient train-based Lagrangian relaxation decomposition

This paper focuses on the simultaneous passenger train routing and timetabling problem on the rail network consisting of both unidirectional and bidirectional tracks using an efficient train-based Lagrangian relaxation decomposition. We first build an integer linear programming model with many 0–1 binary and non-negative integer decision variables, after then reformulate it as a train path-choice model for providing an easier train-based Lagrangian relaxation decomposition mechanism based on the construction of space-time discretized network extending from node-cell-based rail network. Moreover, through reformulating safety usage interval restrictions with a smaller number of constraints in this reformulated model, the train-based decomposition needs fewer Lagrangian multipliers to relax these constraints. On the basis of this decomposition, a solving framework including a heuristic algorithm is proposed to simultaneously optimize both the dual and feasible solutions. A set of numerical experiments demonstrate the proposed Lagrangian relaxation decomposition approach has better performances in terms of minimizing both train travel time and computational times.     

Optimizing train stopping patterns and schedules for high-speed passenger rail corridors

High-speed railway (HSR) systems have been developing rapidly in China and various other countries throughout the past decade; as a result, the question of how to efficiently operate such large-scale systems is posing a new challenge to the railway industry. A high-quality train timetable should take full advantage of the system’s capacity to meet transportation demands. This paper presents a mathematical model for optimizing a train timetable for an HSR system. We propose an innovative methodology using a column-generation-based heuristic algorithm to simultaneously account for both passenger service demands and train scheduling. First, we transform a mathematical model into a simple linear programming problem using a Lagrangian relaxation method. Second, we search for the optimal solution by updating the restricted master problem (RMP) and the sub-problems in an iterative process using the column-generation-based algorithm. Finally, we consider the Beijing–Shanghai HSR line as a real-world application of the methodology; the results show that the optimization model and algorithm can improve the defined profit function by approximately 30% and increase the line capacity by approximately 27%. This methodology has the potential to improve the service level and capacity of HSR lines with no additional high-cost capital investment (e.g., the addition of new tracks, bridges and tunnels on the mainline and/or at stations).     

Optimizing train operational plan in an urban rail corridor based on the maximum headway function

The train operational plan (TOP) plays a crucial role in the efficient and effective operation of an urban rail system. We optimize the train operational plan in a special network layout, an urban rail corridor with one terminal yard, by decomposing it into two sub-problems, i.e., the train departure profile optimization and the rolling stock circulation optimization. The first sub-problem synthetically optimizes frequency setting, timetabling and the rolling stock circulation at the terminal without a yard. The maximum headway function is generated to ensure the service of the train operational plan without considering travel demand, then we present a model to minimize the number of train trips, and design a heuristic algorithm to maximize the train headway. On the basis of a given timetable, the rolling stock circulation optimization only involves the terminal with a yard. We propose a model to minimize the number of trains and yard–station runs, and an algorithm to find the optimal assignment of train-trip pair connections is designed. The computational complexities of the two algorithms are both linear. Finally, a real case study shows that the train operational plan developed by our approach enables a better match of train headway and travel demand, and reduces the operational cost while satisfying the requirement of the level of service.     

Timetable optimization models and methods for minimizing passenger waiting time at public transit terminals

This paper focuses on developing mathematical optimization models for the train timetabling problem with respect to dynamic travel demand and capacity constraints. The train scheduling models presented in this paper aim to minimize passenger waiting times at public transit terminals. Linear and non-linear formulations of the problem are presented. The non-linear formulation is then improved through introducing service frequency variables. Heuristic rules are suggested and embedded in the improved non-linear formulation to reduce the computational time effort needed to find the upper bound. The effectiveness of the proposed train timetabling models is illustrated through the application to an underground urban rail line in the city of Tehran. The results demonstrate the effectiveness of the proposed demand-oriented train timetabling models, in terms of decreasing passenger waiting times. Compared to the baseline and regular timetables, total waiting time is reduced by 6.36% and 10.55% respectively, through the proposed mathematical optimization models.     

The train platforming problem: The infrastructure management company perspective

If railway companies ask for station capacity numbers, their underlying question is in fact one about the platformability of extra trains. Train platformability depends not only on the infrastructure, buffer times, and the desired departure and arrival times of the trains, but also on route durations, which depend on train speeds and lengths, as well as on conflicts between routes at any given time. We consider all these factors in this paper. We assume a current train set and a future one, where the second is based on the expected traffic increase through the station considered. The platforming problem is about assigning a platform to each train, together with suitable in- and out-routes. Route choices lead to different route durations and imply different in-route-begin and out-route-end times. Our module platforms the maximum possible weighted sum of trains in the current and future train set. The resulting number of trains can be seen as the realistic capacity consumption of the schedule. Our goal function allows for current trains to be preferably allocated to their current platforms.Our module is able to deal with real stations and train sets in a few seconds and has been fully integrated by Infrabel, the Belgian Infrastructure Management Company, in their application called Ocapi, which is now used to platform existing and projected train sets and to determine the capacity consumption.     

Scheduling freight trains traveling on complex networks

In the US, freight railways are one of the major means to transport goods from ports to inland destinations. According to the Association of American Railroad’s study, rail companies move more than 40% of the nation’s total freight. Given the fact that the freight railway industry is already running without much excess capacity, better planning and scheduling tools are needed to effectively manage the scarce resources, in order to cope with the rapidly increasing demand for railway transportation. This research develops optimization-based approaches for scheduling of freight trains. Two mathematical formulations of the scheduling problem are first introduced. One assumes the path of each train, which is the track segments each train uses, is given and the other one relaxes this assumption. Several heuristics based on mixtures of the two formulations are proposed. The proposed algorithms are able to outperform two existing heuristics, namely a simple look-ahead greedy heuristic and a global neighborhood search algorithm, in terms of railway total train delay. For large networks, two algorithms based on the idea of decomposition are developed and are shown to significantly outperform two existing algorithms.     

Inhalable railroad particles at ground level and subterranean stations - Physical and chemical properties and relation to train traffic

The paper compares PM10 concentrations in railroad environments with EU air quality standards and characterizes particle concentrations and particle properties in relation to train traffic. The results show that PM10 concentrations in ground-level railroad environments do not exceed the EU directive 24-h limit value, while on the platforms of the two subterranean stations PM10 concentrations were far above the outdoor limit value. Diurnal and weekly patterns in PM10 concentration could be identified, co-varying with train traffic intensity. The particle mass size distribution peaked at around 2-6 μm. The elemental composition of PM10 at the subterranean stations was dominated by Fe.     

Probabilistic analysis of the release of liquefied natural gas (LNG) tenders due to freight-train derailments

Liquefied natural gas (LNG) has emerged as a possible alternative fuel for freight railroads in the United States, due to the availability of cheap domestic natural gas and continued pursuit of environmental and energy sustainability. A safety concern regarding the deployment of LNG-powered trains is the risk of breaching the LNG tender car (a special type of hazardous materials car that stores fuel for adjacent locomotives) in a train accident. When a train is derailed, an LNG tender car might be derailed or damaged, causing a release and possible fire. This paper describes the first study that focuses on modeling the probability of an LNG tender car release incident due to a freight train derailment on a mainline. The model accounts for a number of factors such as FRA track class, method of operation, annual traffic density level, train length, the point of derailment, accident speed, the position(s) of the LNG tender(s) in a train, and LNG tender car design. The model can be applied to any specified route or network with LNG-fueled trains. The implementation of the model can be undertaken by the railroad industry to develop proactive risk management solutions when using LNG as an alternative railroad fuel.     

Efficient dispatching rules on double tracks with heterogeneous train traffic

The most natural and popular dispatching rule for double-track segments is to dedicate one track for trains traveling in one direction. However, sometimes passenger trains have to share some portions of the railway with freight trains and passenger trains are traveling faster and faster nowadays. The major drawback of this dedicated rule is that a fast train can be caught behind a slow train and experience significant knock-on delay. In this paper, we propose a switchable dispatching policy for a double-track segment. The new dispatching rule enables the fast train to pass the slow train by using the track traveled by trains in the opposite direction if the track is empty. We use queueing theory techniques to derive the delay functions of this policy. The numerical experiments show that a switchable policy can reduce the fast train knock-on delay by as high as 30% compared to a dedicated policy. When there are crossovers at the middle of the double-track segment, our proposed switchable policy can reduce the delay of the fast trains by as high as 65%.     

Integrated operations planning and revenue management for rail freight transportation

In the rail industry, profit maximization relies heavily on the integration of logistics activities with an improved management of revenues. The operational policies chosen by the carrier have an important impact on the network yield and thus on global profitability. This paper bridges the gap between railroad operations planning and revenue management. We propose a new bilevel mathematical formulation which encompasses pricing decisions and network planning policies such as car blocking and routing as well as train make-up and scheduling. An exact solution approach based on a mixed integer formulation adapted to the problem structure is presented, and computational results are reported on randomly generated instances.