Individual and Private Sector Contributes 18.3 Percent of the GDP

China's individual and private economic sector has developed in the tide of reform and opening-up. According to the estimation of the National Bureau of Statistics, in 2000 the individual and private sector created 1,497.5 billion yuan in the GDP, accounting for 18.3 percent of the national total. The sector has developed from a supplement to the national economy at the beginning to a major component of the socialist market economy. The employees of individual and private businesses are "buildings of the cause of     

航行于波浪中的肥大型船波浪增阻计算研究(英文)

Under the background of the energy saving and emission reduction, more and more attention has been placed on investigating the energy efficiency of ships. The added resistance has been noted for being crucial in predicting the decrease of speed on a ship operating at sea. Furthermore, it is also significant to investigate the added resistance for a ship functioning in short waves of large modern ships. The researcher presents an estimation formula for the calculation of an added resistance study in short waves derived from the reflection law. An improved method has been proposed to calculate the added resistance due to ship motions, which applies the radiated energy theory along with the strip method. This procedure is based on an extended integral equation (EIE) method, which was used for solving the hydrodynamic coefficients without effects of the irregular frequency. Next, a combined method was recommended for the estimation of added resistance for a ship in the whole wave length range. The comparison data with other experiments indicate the method presented in the paper provides satisfactory results for large blunt ship.     

Dynamic interaction of parallel moving ships in close proximity

Nowadays,there are many studies conducted in the field of marine hydrodynamics which focus on two vessels traveling and floating in sufficiently close proximity to experience significant interactions.The hydrodynamic behavior of parallel moving ships in waves is an interesting and important topic of late.A numerical investigation has been carried out for the prediction of wave exciting forces and motion responses of parallel moving ships in regular waves.The numerical solution was based on 3D distribution technique and using the linear wave theory to determine the exciting forces and ship＇s motion.The speed effects have been considered in the Green function for more realistic results.The numerical computations of wave exciting forces and motion responses were carried out for a Mariner and Series 60 for the purpose of discovering different Froude numbers and different separation distances in head sea conditions.Based on the numerical computations,it was revealed that the sway,roll and yaw have a significant effect due to hydrodynamic interaction.     

Errata

正In the paper"Influence of Fouling Assemblage on the Corrosion Behaviour of Mild Steel in the Coastal Waters of The Gulf of Mannar,India"in Vol.12,No.4,Page:509,References were lost,and the two authors’biographies were identical.The correct text is shown below.We apologize to the authors and our readers for any inconvenience caused by the errors.     

Review and pros-pects ofr China''''s economy

The Chinese economy grew 8 per cent in 2002. The speedy growth of China's economy in 2002 was fuelled by booming exports and the central government efforts to stimulate domestic demand. Preliminary figures from the National Bureau of Statistics suggest that the country's gross domestic product (GDP) reached 10.2 trillion yuan (US$1.23 trillion) in 2002, an increase of 8 per cent from the previous year. 2002 is a year for which we have a whole host of things to rejoice over, to remember, and to toast. The momentous 16th National Congress of the Communist Party of China, which selected a new leadership for our country, was the biggest event on China's     

基于模拟减少集装箱船待港时间的实用方法(英文)

The main challenge for container ports is the planning required for berthing container ships while docked in port.Growth of containerization is creating problems for ports and container terminals as they reach their capacity limits of various resources which increasingly leads to traffic and port congestion.Good planning and management of container terminal operations reduces waiting time for liner ships.Reducing the waiting time improves the terminal’s productivity and decreases the port difficulties.Two important keys to reducing waiting time with berth allocation are determining suitable access channel depths and increasing the number of berths which in this paper are studied and analyzed as practical solutions.Simulation based analysis is the only way to understand how various resources interact with each other and how they are affected in the berthing time of ships.We used the Enterprise Dynamics software to produce simulation models due to the complexity and nature of the problems.We further present case study for berth allocation simulation of the biggest container terminal in Iran and the optimum access channel depth and the number of berths are obtained from simulation results.The results show a significant reduction in the waiting time for container ships and can be useful for major functions in operations and development of container ship terminals.     

CCS:Pioneer for LNG Ship Standard

Although China is relatively late in the trial use of LNG ships,she has become the front runner in the promotion of LNG ships.The launch of China’s first LNG/diesel hybrid pilot inland waterway ship in 2010 became the prelude for the application of LNG as bunker fuel for water transportation.At present,with the speeding up of the layout of LNG stations of energy companies,and the increase of the government’s policy support,there is the trend of fast development of"oil converted to     

Ship hull plate processing surface fairing with constraints based on B-spline

The problem of ship hull plate processing surface fairing with constraints based on B-spline is solved in this paper. The algorithm for B-spline curve fairing with constraints is one of the most common methods in plane curve fairing. The algorithm can be applied to global and local curve fairing. It can constrain the perturbation range of the control points and the shape variation of the curve, and get a better fairing result in plane curves. In this paper, a new fairing algorithm with constraints for curves and surfaces in space is presented. Then this method is applied to the experiments of ship hull plate processing surface. Finally numerical results are obtained to show the efficiency of this method.     

Application of large eddy simulation in the performance study of wave blocker

The configuration and aerodynamic performance of the inlet system are important aspects in the process of installing a gas turbine on a naval vessel. Under the requirements, large eddy simulation （LES） is used to simulate the three-dimensional fluid flow in the wave blocker of a marine inlet filter. The Smagorinsky-Lilly sub-grid model was used to model motions of small-scale structures. During numerical simulation, the SIMPLE algorithm was applied. The central-differencing spatial discretization scheme and the second order accuracy finite difference for the temporal discretization were used. Simulation gives satisfactory distribution of the vorticity fields and turbulent kinetic energy. Compared with the k-ε turbulent model, the results of LES are better for the distribution of parameters. The results of experimental study in a small-scale wind tunnel indicate that numerical calculation has higher accuracy. Therefore, the methods used are worthy of reference and introduction for the design of an inlet system.     

第六届国际流体力学会议(英文)

June 30 to July 3, 2011 in Guangzhou, China The International Conference on Fluid Mechanics (ICFM) is the premier forum for the presentation of technological advances and research results in the fields of theoretical, experimental, and computational Fluid Mechanics. It provides a forum for researchers to     

Exciting forces for a wave energy device consisting of a pair of coaxial cylinders in water of finite depth

Two coaxial vertical cylinders-one is a riding hollow cylinder and the other a solid cylinder of greater radius at some distance above an impermeable horizontal bottom,were considered.This problem of diffraction by these two cylinders,which were considered as idealization of a buoy and a circular plate,can be considered as a wave energy device.The wave energy that is created and transferred by this device can be appropriately used in many applications in lieu of conventional energy.Method of separation of variables was used to obtain the analytical expressions for the diffracted potentials in four clearly identified regions.By applying the appropriate matching conditions along the three virtual boundaries between the regions,a system of linear equations was obtained,which was solved for the unknown coefficients.The potentials allowed us to obtain the exciting forces acting on both cylinders.Sets of exciting forces were obtained for different radii of the cylinders and for different gaps between the cylinders.It was observed that changes in radius and the gap had significant effect on the forces.It was found that mostly the exciting forces were significant only at lower frequencies.The exciting forces almost vanished at higher frequencies.The problem was also investigated for the base case of no plate arrangement,i.e.,the case having only the floating cylinder tethered to the sea-bed.Comparison of forces for both arrangements was carried out.In order to take care of the radiation of the cylinders due to surge motion,the corresponding added mass and the damping coefficients for both cylinders were also computed.All the results were depicted graphically and compared with available results.     

3D numerical modeling of wave forces on tandem fixed cylinders using the BEM

In this paper a 3D numerical model was developed to study the complicated interaction between waves and a set of tandem fixed cylinders.The fluid was considered to be inviscid and irrotational.Therefore,the Helmholtz equation was used as a governing equation.The boundary element method（BEM） was adopted to discretize the relevant equations.Open boundaries were used in far fields of the study domain.Linear waves were generated and propagated towards tandem fixed cylinders to estimate the forces applied on them.Special attention was paid to consideration of the effect on varying non-dimensional cylinder radius and distance between cylinders,ka and kd on forces and trapped modes.The middle cylinder wave forces and trapped modes in a set of nine tandem cylinders were validated utilizing analytical data.The comparisons confirm the accuracy of the model.The results of the inline wave force estimation on n tandem cylinders show that the critical cylinder in the row is the middle one for odd numbers of cylinders.Furthermore the results show that the critical trapped mode effect occurs for normalized cylinder radiuses close to 0.5 and 1.0.Finally the force estimation for n tandem cylinders confirms that force amplitude of the middle cylinder versus normalized separation distance fluctuates about that of a single cylinder.     

考虑不确定性因素的路径优化(英文)

A route optimization methodology in the frame of an onboard decision support/guidance system for the ship’s master has been developed and is presented in this paper.The method aims at the minimization of the fuel voyage cost and the risks related to the ship’s seakeeping performance expected to be within acceptable limits of voyage duration.Parts of this methodology were implemented by interfacing alternative probability assessment methods,such as Monte Carlo,first order reliability method(FORM) and second order reliability method(SORM),and a 3-D seakeeping code,including a software tool for the calculation of the added resistance in waves of NTUA-SDL.The entire system was integrated within the probabilistic analysis software PROBAN.Two of the main modules for the calculation of added resistance and the probabilistic assessment for the considered seakeeping hazards with respect to exceedance levels of predefined threshold values are herein elaborated and validation studies proved their efficiency in view of their implementation into an on-board optimization system.     

拖曳嵌入式板锚在中国的研究近况(英文)

Experimental and theoretical studies of drag embedment plate anchors recently carried out in Tianjin University are summarized in this research paper, which involve a series of important topics relevant to the study of drag anchors. The techniques for measuring the trajectory and movement direction of drag anchors in soils, the techniques for measuring the moving embedment point and reverse catenary shape of the embedded drag line, the penetration mechanism and kinematic behavior of drag anchors, the ultimate embedment depth of drag anchors, the movement direction of the anchor with an arbitrary fluke section, the reverse catenary properties of the embedded drag line, the interactional properties between drag anchor and installation line, the kinematic model of drag anchors in seabed soils, and the analytical method for predicting the anchor trajectory in soils will all be examined. The present work remarkably reduces the uncertainties in design and analysis of drag embedment plate anchors, and is beneficial to improving the application of this new type of drag anchor in offshore engineering.     

采用局部的微分求积法求解激波管问题

The localized differential quadrature (LDQ) method is a numerical technique with high accuracy for solving most kinds of nonlinear problems in engineering and can overcome the difficulties of other methods (such as difference method) to numerically evaluate the derivatives of the functions.Its high efficiency and accuracy attract many engineers to apply the method to solve most of the numerical problems in engineering.However,difficulties can still be found in some particular problems.In the following study,the LDQ was applied to solve the Sod shock tube problem.This problem is a very particular kind of problem,which challenges many common numerical methods.Three different examples were given for testing the robustness and accuracy of the LDQ.In the first example,in which common initial conditions and solving methods were given,the numerical oscillations could be found dramatically;in the second example,the initial conditions were adjusted appropriately and the numerical oscillations were less dramatic than that in the first example;in the third example,the momentum equation of the Sod shock tube problem was corrected by adding artificial viscosity,causing the numerical oscillations to nearly disappear in the process of calculation.The numerical results presented demonstrate the detailed difficulties encountered in the calculations,which need to be improved in future work.However,in summary,the localized differential quadrature is shown to be a trustworthy method for solving most of the nonlinear problems in engineering.     

The method of imbedded Lagrangian element to estimate wave power absorption by some submerged devices

A simple approach is described to estimate the wave power absorption potential of submerged devices known to cause wave focusing and flow enhancement. In particular, the presence of a flow-through power take-off （PTO） system, such as low-head turbines, can be accounted for. The wave radiation characteristics of an appropriately selected Lagrangian element （LE） in the fluid domain are first determined. In the limit of a vanishing mass, the LE reduces to a patch of distributed normal dipoles. The hydrodynamic coefficients of this virtual object are then input in a standard equation of motion where the effect of the PTO can be represented, for example, as a dashpot damping term. The process is illustrated for a class of devices recently proposed by Carter and Ertekin （2011）, although in a simplified form. Favorable wave power absorption is shown for large ratios of the LE wave radiation coefficient over the LE added mass coefficient. Under optimal conditions, the relative flow reduction from the PTO theoretically lies between 0.50 and 1 2 ≈ 0.71, with lower values corresponding to better configurations. Wave power capture widths, the sensitivity of results to PTO damping and sample spectral calculations at a typical site in Hawaiian waters are proposed to further illustrate the versatility of the method.     

加强内地与香港交通合作 发挥香港国际航运中心作用

<正>Dear readers,welcome to read this issue of our jour-nal,Ports of China.The Chinese Government is going to resume exercis-ing sovereignty over Hong Kong.This is a grand eventthat has been drawing world attention.The port in HongKong is one of the busiest ports of the world,ranking asthe world’s biggest container port for five consecutiveyears.Therefore,Hong Kong’s return to the motherlandis a significant event for the Chinese ports industry aswell.In order to celebrate this epoch-making event,weare opentng a special column in this issue,Hong KongComing Back.For this column,Mr.Huang Zhendong,Minister of Communications,sent us his essay,entitled"Strengthening Cooperation Between Hong Kong and theInland Areas in Communications,Mobilising HongKong’s Functions as an International Shipping Center".Mr.Li Weizhong,President,China Ports and HarborsAssn,Also contributed his essay "Hailing Hong Kong’sReturn That Has Wiped Out the Old Humiliation,Look-ing out for a Better Megaport in the Future".also run inthis c     

Analytical study of magnetohydrodynamic propulsion stability

In this paper an analytical solution for the stability of the fully developed flow drive in a magneto-hydro-dynamic pump with pulsating transverse Eletro-magnetic fields is presented. To do this, a theoretical model of the flow is developed and the analytical results are obtained for both the cylindrical and Cartesian configurations that are proper to use in the propulsion of marine vessels. The governing parabolic momentum PDEs are transformed into an ordinary differential equation using approximate velocity distribution. The numerical results are obtained and asymptotic analyses are built to discover the mathematical behavior of the solutions. The maximum velocity in a magneto-hydro-dynamic pump versus time for various values of the Stuart number, electro-magnetic interaction number, Reynolds number, aspect ratio, as well as the magnetic and electrical angular frequency and the shift of the phase angle is presented. Results show that for a high Stuart number there is a frequency limit for stability of the fluid flow in a certain direction of the flow. This stability frequency is dependent on the geometric parameters of a channel.     

关于“船舶结构中组合旋转壳的应力分析”的讨论(英文)

The authors have made an excellent contribution to the application of thetransfer matrix method in combined shells of revolution. In this connection, Iwould like to make the following suggestions for the future extension of theirwork: