The effectiveness and costs of speed reductions on emissions from international shipping

Greenhouse gas emissions from international shipping are an increasing concern. The paper evaluates whether vessel speed reduction can be a potentially cost-effective CO₂ mitigation option for ships calling on US ports. By applying a profit-maximizing equation to estimate route-specific, economically-efficient speeds, we explore policy impacts of a fuel tax and a speed reduction mandate on CO₂ emissions. The profit-maximizing function incorporates opportunity costs associated with speed reduction that go unobserved in more traditional marginal abatement cost analyses. We find that a fuel tax of about $150/ton fuel will lead to average speed-related CO₂ reductions of about 20–30%. Moreover, a speed reduction mandate targeted to achieve 20% CO₂ reduction in the container fleet costs between $30 and $200 per ton CO₂ abated, depending on how the fleet responds to a speed reduction mandate.     

The regional impact of the TGV

Evidence on the regional impact of the TGV high speed rail line between Paris and Lyons is provided, on the basis of surveys carried out both before and after its inauguration. The timing of the TGV and the nature of the surveys are explained, while the analysis contrasts the impact on the Paris and Rhone-Alps regions at each end of the TGV line. Tourism and service industries are the main subjects of the research.Original in French.     

The impact of speed limits on traffic equilibrium and system performance in networks

Speed limits are usually imposed on roads in an attempt to enhance safety and sometimes serve the purpose of reducing fuel consumption and vehicular emissions as well. Most previous studies up to date focus on investigation of the effects of speed limits from a local perspective, while network-wide traffic reallocation effects are overlooked. This paper makes the first attempt to investigate how a link-specific speed limit law reallocates traffic flow in an equilibrium manner at a macroscopic network level. We find that, although the link travel time–flow relationship is altered after a speed limit is imposed, the standard traffic assignment method still applies. With the commonly adopted assumptions, the uniqueness of link travel times at user equilibrium (UE) remains valid, and the UE flows on links with non-binding speed limits are still unique. The UE flows on other links with binding speed limits may not be unique but can be explicitly characterized by a polyhedron or a linear system of equalities and inequalities. Furthermore, taking into account the traffic reallocation effects of speed limits, we compare the capability of speed limits and road pricing for decentralizing desirable network flow patterns. Although from a different perspective for regulating traffic flows with a different mechanism, a speed limit law may play the same role as a toll charge scheme and perform better than some negative (rebate) toll schemes under certain conditions for network flow management.     

The impact of depot location,fleet composition and routing on emissions in city logistics

This paper investigates the combined impact of depot location, fleet composition and routing decisions on vehicle emissions in city logistics. We consider a city in which goods need to be delivered from a depot to customers located in nested zones characterized by different speed limits. The objective is to minimize the total depot, vehicle and routing cost, where the latter can be defined with respect to the cost of fuel consumption and CO₂ emissions. A new powerful adaptive large neighborhood search metaheuristic is developed and successfully applied to a large pool of new benchmark instances. Extensive analyses are performed to empirically assess the effect of various problem parameters, such as depot cost and location, customer distribution and heterogeneous vehicles on key performance indicators, including fuel consumption, emissions and operational costs. Several managerial insights are presented.     

The relations between high speed trains and the organization of regional transport services

The purpose of this report is to show the importance and the diversity of the levels on which the introduction of a high speed train service may affect the organization of regional transport services. To do this, two main sources have been used. First, the experience acquired by the regions served or influenced by the South-East high speed train and, second, the prospective reflections of some regions concerned by present plans for future servicing by high speed trains. In both cases, regional diagnoses or forecasts were conveyed to us by the Regional Amenities Offices within the framework of a discussion group led by the Department of Economic Analysis and of the Plan. It is appropriate here to thank them very much for these contributions, without which the present synthesis would not have been possible.     

A data-driven travel mode share estimation framework based on mobile device location data

Transportation - Mobile device location data (MDLD) contains abundant travel behavior information to support travel demand analysis. Compared to traditional travel surveys, MDLD has larger...     

Quantifying the climate impact of emissions from land-based transport in Germany

Although climate change is a global problem, specific mitigation measures are frequently applied on regional or national scales only. This is the case in particular for measures to reduce the emissions of land-based transport, which is largely characterized by regional or national systems with independent infrastructure, organization, and regulation. The climate perturbations caused by regional transport emissions are small compared to those resulting from global emissions. Consequently, they can be smaller than the detection limits in global three-dimensional chemistry-climate model simulations, hampering the evaluation of the climate benefit of mitigation strategies. Hence, we developed a new approach to solve this problem. The approach is based on a combination of a detailed three-dimensional global chemistry-climate model system, aerosol-climate response functions, and a zero-dimensional climate response model. For demonstration purposes, the approach was applied to results from a transport and emission modeling suite, which was designed to quantify the present-day and possible future transport activities in Germany and the resulting emissions. The results show that, in a baseline scenario, German transport emissions result in an increase in global mean surface temperature of the order of 0.01 K during the 21st century. This effect is dominated by the CO₂ emissions, in contrast to the impact of global transport emissions, where non-CO₂ species make a larger relative contribution to transport-induced climate change than in the case of German emissions. Our new approach is ready for operational use to evaluate the climate benefit of mitigation strategies to reduce the impact of transport emissions.     

Comparison of pattern recognition techniques for the classification of impact acoustic emissions

Current day condition monitoring applications involving wood are mostly carried out through visual inspection and if necessary some impact acoustic examination is carried out. These inspections are mainly done intuitively by skilled personnel. In this paper, a pattern recognition approach has been considered to automate such intuitive human skills for the development of robust and reliable methods within the area. The study presents a comparison of several pattern recognition techniques combined with various stationary feature extraction techniques for classification of impact acoustic emissions. Further issues concerning feature fusion are discussed as well. It is hoped that this kind of broad analysis could be used to handle a wide spectrum of tasks within the area, and would provide a perfect ground for future research directions. A brief introduction to the techniques is provided for the benefit of the readers unfamiliar with the techniques.Pattern classifiers such as support vector machines, etc. are combined with stationary feature extraction techniques such as linear predictive cepstral coefficients, etc. Results from support vector machines in combination with linear predictive cepstral coefficients delivered good classification rates. However, Gaussian mixture models delivered higher classification rates when feature fusion is proposed.     

TransCAD中OD矩阵反推方法在道路交通量预测中的应用研究

利用TransCAD软件OD矩阵反推功能,结合实践经验及国外相关资料,介绍了在城市新建项目交通影响评价过程中周边道路交通量预测方法。     

Improving the resolution of gridded-hourly mobile emissions: incorporating spatial variability and handling missing data

To more accurately predict hourly running stabilized link volumes for emissions modeling, a new method was recently developed that disaggregates the period-based model link volumes into hourly volumes using observed traffic count data and multivariate multiple regression (MMR). This paper extends the MMR methodology with clustering and classification analyses to account for spatial variability and to accommodate model links that do not have matching observed traffic count data. The methodology was applied to data collected in the South Air Basin. The spatial analysis resulted in identifying five clusters (or 24-h profiles) for San Diego and two clusters for Los Angeles. The MMR models were then estimated with and without clustering. For San Diego, the disaggregated model volumes with clustering were much closer to the observed volumes than those without clustering, with the exception of the a.m. period. For most hours in Los Angeles, the predicted volumes with clustering were only slightly closer to the observed volumes than those predicted without clustering, suggesting that spatial effects are minimal in Los Angeles (i.e., that 24-h volume profiles are fairly similar throughout the region) and clustering is not necessary. Finally, two classification models, one for San Diego and one for Los Angeles were developed and tested for network link data that does not have matching observed count data. The results indicate the procedure is relatively good at predicting a cluster assignment for the unmatched location for Los Angeles but less accurate for San Diego.     

公路网规划环境影响评价内容、程序和方法体系研究

在总结研究目前国内已有公路网规划环境影响评价工作的基础上,根据规划环境评价的目标要求和公路网规划的实际,提出了包括内容、程序和方法等的公路网规划环境影响评价体系,提高现有公路网规划环境评价能力和未来公路网规划环境评价质量。     

Macroscopic Fundamental Diagrams: A cross-comparison of estimation methods

This paper aims to cross-compare existing estimation methods for the Macroscopic Fundamental Diagram. Raw data are provided by a mesoscopic simulation tool for two typical networks that mimic an urban corridor and a meshed urban center. We mainly focus on homogenous network loading in order to fairly cross-compare the different methods with the analytical reference. It appears that the only way to estimate the MFD without bias is to have the full information of vehicle trajectories over the network and to apply Edie’s definitions. Combining information from probes (mean network speed) and loop detectors (mean network flow) also provides accurate results even for low sampling rate (<10%). Loop detectors fail to provide a good estimation for mean network speed or density because they cannot capture the traffic spatial dynamics over links. This paper proposes a simple adjustment technic in order to reduce the discrepancy when only loop detectors are available.     

Experimental study of the impact of structural geometry and wind direction on vehicle emissions in urban environment

Vehicle emissions inside an urban environment are investigated using a wind-tunnel under neutral atmospheric conditions. The urban environment was formed as street canyon model. The diffusion flow field in the boundary layer inside the street canyon was examined at different locations of varying geometry of the street and wind directions in the downwind distance of the leeward side of the street canyon model. The results show that the vertical velocity increases as the aspect ratio increases and with wind direction increases from θ = 90°. The pollutant concentration increases as the aspect ratio decreases. The pollutant concentration decreases as the wind direction increases from θ = 90°. The pollutant concentration distributions indicate that the variability of the structure, geometry and wind direction inside the street canyon are important parameters for estimating air quality in the urban street canyon.     

Gravity model estimation with proxy variables and the impact of endogeneity on transportation planning

This study presents an alternative method for estimating gravity models by multiple linear regression that is based on proxy variables, thus circumventing the endogeneity problems arising when least-squares estimators are used. The proxy variable approach generates consistent estimators for a gravity model without endogeneity bias. The presence of endogeneity is tested for using statistical tests developed specifically for our application.We conclude that proxy variables eliminate the endogeneity and produce consistent estimators in gravity models estimated using least squares. We also find, however, that endogeneity bias has no significant impact either on gravity model prediction or on urban transportation system planning processes based on such models.     

Assessing methods for comparing emissions from gasoline and diesel light-duty vehicles based on microscale measurements

This paper assess whether a real-world second-by-second methodology that integrates vehicle activity and emissions rates for light-duty gasoline vehicles can be extended to diesel vehicles. Secondly it compares fuel use and emission rates between gasoline and diesel light-duty vehicles. To evaluate the methodology, real-world field data from two light-duty diesel vehicles are used. Vehicle specific power, a function of vehicle speed, acceleration, and road grade, is evaluated with respect to ability to explain variation in emissions rates. Vehicle specific power has been used previously to define activity-based modes and to quantify variation in fuel use and emission rates of gasoline vehicles taking into account idle, acceleration, cruise, and deceleration. The fuel use and emission rates for light-duty diesel vehicles can also be explained using vehicle specific power -based modes. Thus, the methodology enables direct comparisons for different vehicle fuels and technologies. Furthermore, the method can be used to estimate average fuel use and emission rates for a wide variety of driving cycles.     

Analysis of the effectiveness of control measures to mitigate road dust emissions in a regional network

The effectiveness of control measures to reduce road dust emissions is analyzed using a year’s data of road dust emissions collected with a mobile sampling platform and a survey of road maintenance practices in the Lake Tahoe Basin of Nevada and California US. Attributes such as sweeping practices, anti-icing, shoulder improvement, pavement condition, trackout, and abrasive material from road segments were analyzed with a feature subset selection algorithm. Street sweeping was found to be an effective means of controlling dust emissions from roads. Road dust from dirty tertiary roads served as a continuous source of suspendable material for adjacent high-speed roads in the winter time. To be most effective, emission control strategies require that not only primary roads, but all roads be swept after snow storms to recover applied abrasive material.     

郑西客运专线大断面黄土隧道施工方法研究

文章结合郑西客运专线大断面黄土隧道设计、施工及科研情况,从沉降变形控制、施工进度、机械配套等方面对双侧壁导洞、CRD、CD、弧形导洞等4种工法进行了比选分析,提出了与不同工况相适应的工法以及施工要点,可供参考和借鉴。     

The effectiveness of a European speed limit versus an international bunker-levy to reduce CO2 emissions from container shipping

In the fight to reduce CO₂ emissions from international shipping, a bunker-levy is currently under consideration at the International Maritime Organization (IMO). Faced with the inability of the IMO to reach an agreement in the short term, the European Commission is now contemplating a unilateral measure of a speed limit for all ships entering European Union (EU) ports. This paper argues that this measure is counterproductive for two reasons. Firstly, because it may ultimately generate more emissions and incur a cost per ton of CO₂ which is more than society is willing to pay. Secondly, because it is sub-optimal compared to results obtained if an international bunker-levy was to be implemented. These elements are illustrated using two direct transatlantic services operated in 2010.     

The overall effects of road works on global warming gas emissions

Road characteristics influence the amount of pollution generated by traffic. They govern the rolling resistance, which includes: the viscoelastic behaviour of the pavement structure, surface texture, and profile unevenness. Road works are performed on a periodic basis to maintain these characteristics at proper levels of service (e.g. safety, comfort, and noise). While such works produce additional pollution (due to congestion around worksites or extra fuel consumption along the detour route), they still result in less pollution over the long term. This article assesses the balance between an increase in gas emissions during road works and the reduction in emissions from traffic once the works are completed. It is demonstrated that when road works are introduced to correct longitudinal profiles, rather than texture, the emissions benefit is substantial.     

A trade-off analysis between penetration rate and sampling frequency of mobile sensors in traffic state estimation

The rapid-growth of smartphones with embedded navigation systems such as GPS modules provides new ways of monitoring traffic. These devices can register and send a great amount of traffic related data, which can be used for traffic state estimation. In such a case, the amount of data collected depends on two variables: the penetration rate of devices in traffic flow (P) and their data sampling frequency (z). Referring to data composition as the way certain number of observations is collected, in terms of P and z, we need to understand the relation between the amount and composition of data collected, and the accuracy achieved in traffic state estimation. This was accomplished through an in-depth analysis of two datasets of vehicle trajectories on freeways. The first dataset consists of trajectories over a real freeway, while the second dataset is obtained through microsimulation. Hypothetical scenarios of data sent by equipped vehicles were created, based on the composition of data collected. Different values of P and z were used, and each unique combination defined a specific scenario. Traffic states were estimated through two simple methods, and a more advanced one that incorporates traffic flow theory. A measure to quantify data to be collected was proposed, based on travel time, number of vehicles, penetration rate and sampling frequency. The error was below 6% for every scenario in each dataset. Also, increasing data reduced variability in data count estimation. The performance of the different estimation methods varied through each dataset and scenario. Since the same number of observations can be gathered with different combinations of P and z, the effect of data composition was analyzed (a trade-off between penetration rate and sampling frequency). Different situations were found. In some, an increase in penetration rate is more effective to reduce estimation error than an increase in sampling frequency, considering an equal increase in observations. In other areas, the opposite relationship was found. Between these areas, an indifference curve was found. In fact, this curve is the solution to the optimization problem of minimizing the error given any fixed number of observations. As a general result, increasing sampling frequency (penetration rate) is more beneficial when the current sampling frequency (penetration rate) is low, independent of the penetration rate (sampling frequency).