A Stated preference freight mode choice model

Transport policy aims to assist the transport system to work more efficiently and effectively. An understanding of the reasons why people choose to move freight in a certain manner is critical to the development of appropriate policies. This article outlines a data collection approach and the development of a disaggregate mode choice model applicable to the analysis of freight shipper decision making. It focuses on the choice between rail and road in Java, Indonesia. The model indicates that safety, reliability and responsiveness are major attributes influencing rail/road freight mode choice. Transport policies aimed at improving these dimensions should increase the attractiveness of rail transport.     

Achieving transport modal split targets at intermodal freight hubs using a model predictive approach

The increase of international freight commerce is creating pressure on the existing transport network. Cooperation between the different transport parties (e.g., terminal managers, forwarders and transport providers) is required to increase the network throughput using the same infrastructure. The intermodal hubs are locations where cargo is stored and can switch transport modality while approaching the final destination. Decisions regarding cargo assignment are based on cargo properties. Cargo properties can be fixed (e.g., destination, volume, weight) or time varying (remaining time until due time or goods expiration date). The intermodal hub manager, with access to certain cargo information, can promote cooperation with and among different transport providers that pick up and deliver cargo at the hub. In this paper, cargo evolution at intermodal hubs is modeled based on a mass balance, taking into account hub cargo inflows and outflows, plus an update of the remaining time until cargo due time. Using this model, written in a state-space representation, we propose a model predictive approach to address the Modal Split Aware – Cargo Assignment Problem (MSA–CAP). The MSA–CAP concerns the cargo assignment to the available transport capacity such that the final destination can be reached on time while taking into consideration the transport modality used. The model predictive approach can anticipate cargo peaks at the hub and assigns cargo in advance, following a push of cargo towards the final destination approach. Through the addition of a modal split constraint it is possible to guide the daily cargo assignment to achieve a transport modal split target over a defined period of time. Numerical experiments illustrate the validity of these statements.     

The potential demand for a urban freight consolidation centre

This paper reports the results of a stated-preference study aimed at investigating how transport decisions are made by receivers or by transport operators about the potential use of an urban freight consolidation centre in the city of Fano, Italy. Because there are no revealed preference data, a stated-choice methodology is used. The stated-choice experiments present two alternatives—one using a private vehicle subject to various traffic regulations and one using the urban freight consolidation centre with varying cost and efficiency levels. Conventional discrete choice data modelling shows that the potential demand is influenced mainly by the distance of the parking bay from the shop, by access permit cost, by the service cost of the urban freight consolidation centre, and by the delay in delivery time. Simulations are then performed to assess how the potential demand is affected by various incentives and regulations affecting urban goods distribution.

A portfolio approach for optimal fleet replacement toward sustainable urban freight transportation

Recently, the use of more sustainable forms of transportation such as electric vehicles (EVs) for delivering goods and parcels to customers in urban areas has received more attention from urban planners and private stakeholders. To provide some insights toward the use of EVs, this work develops an optimization framework using portfolio theory, which takes into account the cost and the risks associated with some input parameter uncertainties, for determining an optimal combination of EVs with internal combustion engine vehicles (ICEVs) in urban freight transportation (UFT) over some planning time period. This model can assist an urban freight operator to choose the best investment strategy for introducing new vehicles into its fleet while gaining economic benefits and having positive impacts on the urban environment. When taking into account the risks that are involved, the numerical results show that EVs have the potential to compete with ICEVs in UFT.     

A model for national freight flows,distribution centers,empty trucks and urban truck movements

Trucks travel both short distances for local deliveries and long distances for transporting goods across the country. Often their travel behavior is tour-based, they run under tight schedules and under curfew on selected roads. Despite these differences from personal travel, in practice truck models largely follow person travel methods. To overcome this shortcoming, a two-layer truck model is developed for the Chicago Metropolitan Area. Long-distance trucks are driven by commodity flows, with distribution centers, rail yards, marine ports and airports being represented explicitly. Empty trucks are accounted for as well. For the short-distance truck model, a novel parameter estimation method makes use of limited data to derive region-specific parameters. The model is fully operational and validates reasonably well against traffic counts.     

Stakeholder-specific data acquisition and urban freight policy evaluation: evidence,implications and new suggestions

Cities, characterised by scarce resources and facing increasing citizens’ requests for more liveable and attractive environments, need to define and implement more efficient urban freight transport policy interventions. It is strategically relevant to perform an ex-ante in-depth policy evaluation. The paper aims at investigating the relevance, the needs and the implications of the data acquisition process by combining a focused review with an original research study. It critically compares five categories of methodological approaches adopted for policy evaluation purposes with an explicit focus on the stated preference method given its behavioural peculiarity and robustness. The review, following a systematic procedure where scientific quality is complemented by relevance and coverage, underlines a high variability in the level of sophistication for data acquisition. While a stakeholder-specific approach seems natural in all those cases where local authorities want to adopt distinct policy instruments for each stakeholder, this is also needed when homogeneous policies impacting the various stakeholders are tested. Stakeholder-specific data acquisition translates into the creation of multiple experimental designs, explicitly conceived for each stakeholder considered. A case study, intended to compare two alternative strategies for data acquisition, provides a quantitative measure of potential distortions in policy evaluation due to the adoption of a stakeholder-generic approach. Results, in terms of willingness to pay measures, show that a stakeholder-specific approach is needed not only when modelling but also in the data acquisition process.     

An integrated risk assessment model: A case of sustainable freight transportation systems

The major challenge in the development of sustainable freight transportation systems (SFTSs) is due to the involvement of numerous dynamic uncertainties and intrinsic sustainability risks. Sustainability risks are potential threats that can have undesirable impacts on the sustainability of a system. The main objective of this study is to identify and evaluate the sustainability risks associated with freight transportation systems (FTSs). Accordingly, a risk analysis approach is developed by innovatively integrating the intuitionistic fuzzy set theory and D-number theory to quantitatively model the sustainability risks. Intuitionistic fuzzy numbers can examine both the membership and non-membership degrees of an element while the D-number theory increases the objectivity of assessments by fusing multiple expert judgments. The proposed risk assessment model facilitates the managers in the development of SFTSs by ensuring visibility, predictability and measurability in freight operations. Unlike the conventional perception, the findings indicate that most of the high priority sustainability risks in FTSs are socially induced rather than financially driven and consciousness in people’s conduct is must to attain the positive results. The analysis alerts the freight managers toward the high priority sustainability risks and guides in pro-active strategy formulation and optimum allocation of mitigation resources to minimize disruptions in SFTSs.     

Route choice preferences: insights from Portuguese freight forwarders and truck drivers

ABSTRACT

Exploring route choice in the context of tolled alternatives can support road operators to achieve better utilization of the infrastructure, as well as maximizing revenue collection. The research presented in this paper is conducted in the context of OPTIMUM, a European Union-funded project. The research objectives include a two-component system of models that proactively calculates commercial vehicles’ toll prices. The component presented in this paper rests on the development of a route choice model that estimates the probabilities of using two alternative routes (toll road vs. national road), based on route attributes and user characteristics. To explore the usefulness of the proposed methodology a case study involving 50 truck drivers and 25 freight operators was conducted in Portugal between January 2016 and November 2017. Results from the route choice model reveal interesting insights about the role of incentives in the choice of toll roads, the perspectives of the different decision-makers and produce Values of Time for the study area.     

A framework to evaluate policy options for supporting electric vehicles in urban freight transport

Electric vehicles (EVs) are considered as a feasible alternative to traditional vehicles. Few studies have addressed the impacts of policies supporting EVs in urban freight transport. To cast light on this topic, we established a framework combining an optimization model with economic analysis to determine the optimal behavior of an individual delivery service provider company and social impacts (e.g., externalities and welfare) in response to policies designed to support EVs, such as purchase subsidy, limited access (zone fee) to congestion/low-emission zones with exemptions for EVs, and vehicle taxes with exemptions for EVs. Numerical experiments showed that the zone fee can increase the company’s total logistics costs but improve the social welfare. It greatly reduced the external cost inside the congestion/low-emission zone with a high population, dense pollution, and heavy traffic. The vehicle taxes and subsidy were found to have the same influence on the company and society, although they have different effects with low tax/subsidy rates because their different effects on vehicle routing plans. Finally, we performed a sensitivity analysis. Local factors at the company and city levels (e.g., types of vehicle and transport network) are also important to designing efficient policies for urban logistics that support EVs.     

A translog cost function of the integrated air freight business: The case of FedEx and UPS

This paper analyzes the cost structure of the integrated air freight business by means of a translog cost function. This allows to extend knowledge on the supply side and to examine if strategies of integrators are consistent with cost structure. The cost function is based on quarterly time-series data from 1990 to 2010 for FedEx and UPS. A total and a variable model are estimated. In addition, a static as well as a dynamic approach is followed. We find that integrators exhibit strong scale and density economies in the short and the long term. This result is in line with the aggressive expansion and cooperation strategies pursued by integrators. Our results indicate that the concentration in the integrated air freight industry will continue: a concern for industry actors and regulatory agencies.     

A discounted recursive logit model for dynamic gridlock network analysis

Emerging sensing technologies such as probe vehicles equipped with Global Positioning System (GPS) devices on board provide us real-time vehicle trajectories. They are helpful for the understanding of the cases that are significant but difficult to observe because of the infrequency, such as gridlock networks. On the premise of this type of emerging technology, this paper propose a sequential route choice model that describes route choice behavior, both in ordinary networks, where drivers acquire spatial knowledge of networks through their experiences, and in extraordinary networks, which are situations that drivers rarely experience, and applicable to real-time traffic simulations. In extraordinary networks, drivers do not have any experience or appropriate information. In such a context, drivers have little spatial knowledge of networks and choose routes based on dynamic decision making, which is sequential and somewhat forward-looking. In order to model these decision-making dynamics, we propose a discounted recursive logit model, which is a sequential route choice model with the discount factor of expected future utility. Through illustrative examples, we show that the discount factor reflects drivers’ decision-making dynamics, and myopic decisions can confound the network congestion level. We also estimate the parameters of the proposed model using a probe taxis’ trajectory data collected on March 4, 2011 and on March 11, 2011, when the Great East Japan Earthquake occurred in the Tokyo Metropolitan area. The results show that the discount factor has a lower value in gridlock networks than in ordinary networks.     

A Bayesian network approach for population synthesis

Agent-based micro-simulation models require a complete list of agents with detailed demographic/socioeconomic information for the purpose of behavior modeling and simulation. This paper introduces a new alternative for population synthesis based on Bayesian networks. A Bayesian network is a graphical representation of a joint probability distribution, encoding probabilistic relationships among a set of variables in an efficient way. Similar to the previously developed probabilistic approach, in this paper, we consider the population synthesis problem to be the inference of a joint probability distribution. In this sense, the Bayesian network model becomes an efficient tool that allows us to compactly represent/reproduce the structure of the population system and preserve privacy and confidentiality in the meanwhile. We demonstrate and assess the performance of this approach in generating synthetic population for Singapore, by using the Household Interview Travel Survey (HITS) data as the known test population. Our results show that the introduced Bayesian network approach is powerful in characterizing the underlying joint distribution, and meanwhile the overfitting of data can be avoided as much as possible.     

A Unified Framework for Selecting a Travel Demand Forecasting Model for Developing Countries

Abstract

The ability to judge and select a model that is appropriate for a particular application is considered to be one of the most important aspects in contemporary transport planning. However, there is no suitable procedure for the systematic selection of a model that is most appropriate for meeting the needs and requirements of a particular planning task. Although there is little literature on the criteria for model assessment and selection methodologies, none can support systematic evaluation of different models versus quality of obtainable data versus efforts for data provision. Such deficiencies support the need for further guidance on a model selection procedure for developing countries where efforts for data provision are highly susceptible to higher sampling and measurement errors. This study presents a unified framework for the systematic model selection process. Evaluation of the framework for a case study of Dar es Salaam city in Tanzania evidences its benefits and applicability.     

A dynamic Bayesian network model for real-time crash prediction using traffic speed conditions data

Traffic crashes occurring on freeways/expressways are considered to relate closely to previous traffic conditions, which are time-varying. Meanwhile, most studies use volume/occupancy/speed parameters to predict the likelihood of crashes, which are invalid for roads where the traffic conditions are estimated using speed data extracted from sampled floating cars or smart phones. Therefore, a dynamic Bayesian network (DBN) model of time sequence traffic data has been proposed to investigate the relationship between crash occurrence and dynamic speed condition data. Moreover, the traffic conditions near the crash site were identified as several state combinations according to the level of congestion and included in the DBN model. Based on 551 crashes and corresponding speed information collected on expressways in Shanghai, China, DBN models were built with time series speed condition data and different state combinations. A comparative analysis of the DBN model using flow detector data and a static Bayesian network model was also conducted. The results show that, with only speed condition data and nine traffic state combinations, the DBN model can achieve a crash prediction accuracy of 76.4% with a false alarm rate of 23.7%. In addition, the results of transferability testing imply that the DBN models are applicable to other similar expressways with 67.0% crash prediction accuracy.     

A cell-based logit-opportunity taxi customer-search model

This paper proposes a cell-based model to predict local customer-search movements of vacant taxi drivers, which incorporates the modeling principles of the logit-based search model and the intervening opportunity model. The local customer-search movements were extracted from the global positioning system data of 460 Hong Kong urban taxis and inputted into a cell-based taxi operating network to calibrate the model and validate the modeling concepts. The model results reveal that the taxi drivers’ local search decisions are significantly affected by the (cumulative) probability of successfully picking up a customer along the search route, and that the drivers do not search their customers under the random walk principle. The proposed model helps predict the effects of the implementation of the policies in adjusting the taxi fleet size and the changes in passenger demand on the customer-search distance and time of taxi drivers.     

A system based approach to develop hybrid model predicting extreme urban NOx and PM2.5 concentrations

One of the major drawbacks of conventional air quality models is their inability in accurately predicting extreme air pollutant concentrations. Hybrid modelling is one of the techniques that estimates/predicts the ‘entire range’ of the distribution of pollutant concentrations by combining the deterministic based models (capable in predicting average range) with suitable statistical (probability) distribution models (capable in predicting extreme range). This research paper describes system based approach in developing hybrid model to predict hourly averages as well as extreme percentile ranges of NO_x and PM_2.5 concentrations at two urban locations having complex traffic heterogeneity, highly variable tropical meteorology and different geographical characteristics. At one of the selected locations i.e. Delhi megacity, during winters, hybridization of AERMOD and Lognormal predicts NO_x and PM_2.5 concentrations satisfactorily with index of agreement ‘d’ values of 0.98–0.99, respectively; however, during summers, AERMOD-Log-logistic and AERMOD-Lognormal are best predicting NO_x and PM_2.5 concentrations with d values of 0.98–0.96, respectively. In another, i.e., Chennai, a coastal megacity, AERMOD-Lognormal predicts PM_2.5 concentrations satisfactorily with d values of 0.98 and 0.99 during winter and summer seasons, respectively. Further, hybrid model has also been used to evaluate regulatory compliance.     

A logit-based model for measuring the effects of transportation infrastructure on land value

Mutual interactions between transportation and land use have long been debated. Despite progress made in computational technology, the study of these interactions is not adequately developed. The most important aspect of such interactions is given by the changes in land values due to changes in transportation infrastructures. We consider the behavioural features of these interactions along with the constraints on the land and/or zoning restrictions and propose a reliable model for the first time to predict land value changes with respect to changes in transportation facilities and accessibility. The proposed model is a logit-based mathematical programming methodology where the relative price of land is predicted with respect to transportation accessibility, neighbourhood amenities, location premium, availability of land, and zoning regulations. A real-world case study is used to exhibit the applicability of the proposed methodology and demonstrate the efficacy of the algorithms and procedures.     

Environmental impacts of transformative land use and transport developments in the Greater Beijing Region: Insights from a new dynamic spatial equilibrium model

This paper reports the insights into environmental impacts of the ongoing transformative land use and transport developments in Greater Beijing, from a new suite of dynamic land use, spatial equilibrium and strategic transport models that is calibrated for medium to long term land use and transport predictions. The model tests are focused on urban passenger travel demand and associated emissions within the municipality of Beijing, accounting for Beijing’s land use and transport interactions with Tianjin, Hebei and beyond. The findings suggests that background trends of urbanization, economic growth and income rises will continue to be very powerful drivers for urban passenger travel demand across all main modes of transport beyond 2030. In order to achieve the dual policy aims for a moderately affluent and equitable nation and reducing the absolute levels of urban transport emissions by 2030, road charging and careful micro-level coordination between land use, built form and public transport provision may need to be considered together for policy implementation in the near future.     

A macroscopic taxi model for passenger demand,taxi utilization and level of services

In most urban areas taxi services are subject to various types of regulation such as entry restriction and price control. However, effective intervention depends on generating and using suitable information on the demand-supply equilibrium of the taxi market. This paper develops a simultaneous equation system of passenger demand, taxi utilization and level of services based on a taxi service situation found in the urban area of Hong Kong over the last ten years. A set of variables is introduced including number of licensed taxis, taxi fare, disposable income, occupied taxi journey time as exogenous variables and daily taxi passenger demand, passenger waiting time, taxi availability, taxi utilization and average taxi waiting time as endogenous variables. These variables are coupled together through a system of nonlinear simultaneous equations whose parameters are estimated from survey data. The simultaneous equation system can be used to obtain useful regulatory information to assist with the decisions concerning the restriction over the number of taxi licenses and the fixing of the taxi fare structure as well as a range of service quality control. This revised version was published online in June 2006 with corrections to the Cover Date.