Optimal joint distance and time toll for cordon-based congestion pricing

This paper addresses the optimal toll design problem for the cordon-based congestion pricing scheme, where both a time-toll and a nonlinear distance-toll (i.e., joint distance and time toll) are levied for each network user’s trip in a pricing cordon. The users’ route choice behaviour is assumed to follow the Logit-based stochastic user equilibrium (SUE). We first propose a link-based convex programming model for the Logit-based SUE problem with a joint distance and time toll pattern. A mathematical program with equilibrium constraints (MPEC) is developed to formulate the optimal joint distance and time toll design problem. The developed MPEC model is equivalently transformed into a semi-infinite programming (SIP) model. A global optimization method named Incremental Constraint Method (ICM) is designed for solving the SIP model. Finally, two numerical examples are used to assess the proposed methodology.     

A bi-level model of dynamic traffic signal control with continuum approximation

This paper proposes a bi-level model for traffic network signal control, which is formulated as a dynamic Stackelberg game and solved as a mathematical program with equilibrium constraints (MPEC). The lower-level problem is a dynamic user equilibrium (DUE) with embedded dynamic network loading (DNL) sub-problem based on the LWR model (Lighthill and Whitham, 1955; Richards, 1956). The upper-level decision variables are (time-varying) signal green splits with the objective of minimizing network-wide travel cost. Unlike most existing literature which mainly use an on-and-off (binary) representation of the signal controls, we employ a continuum signal model recently proposed and analyzed in Han et al. (2014), which aims at describing and predicting the aggregate behavior that exists at signalized intersections without relying on distinct signal phases. Advantages of this continuum signal model include fewer integer variables, less restrictive constraints on the time steps, and higher decision resolution. It simplifies the modeling representation of large-scale urban traffic networks with the benefit of improved computational efficiency in simulation or optimization. We present, for the LWR-based DNL model that explicitly captures vehicle spillback, an in-depth study on the implementation of the continuum signal model, as its approximation accuracy depends on a number of factors and may deteriorate greatly under certain conditions. The proposed MPEC is solved on two test networks with three metaheuristic methods. Parallel computing is employed to significantly accelerate the solution procedure.     

Intermodal hub-and-spoke network design: Incorporating multiple stakeholders and multi-type containers

This paper develops a mathematical program with equilibrium constraints (MPEC) model for the intermodal hub-and-spoke network design (IHSND) problem with multiple stakeholders and multi-type containers. The model incorporates a parametric variational inequality (VI) that formulates the user equilibrium (UE) behavior of intermodal operators in route choice for any given network design decision of the network planner. The model also uses a cost function that is capable of reflecting the transition from scale economies to scale diseconomies in distinct flow regimes for carriers or hub operators, and a disutility function integrating actual transportation charges and congestion impacts for intermodal operators. To solve the MPEC model, a hybrid genetic algorithm (HGA) embedded with a diagonalization method for solving the parametric VI is proposed. Finally, the comparative analysis of the HGA and an exhaustive enumeration algorithm indicates a good performance of the HGA in terms of computational time and solution quality. The HGA is also applied to solve a large-scale problem to show the applicability of the proposed model and algorithm.     

Computer support for operator assignment and dispatching in an urban transit system

The St. Louis Metropolitan Transit Authority, as part of a systematic program to improve maintenance on its buses, is attempting to have operators drive the same vehicle each day. A simulation model was developed for testing the feasibility of the system and testing heuristic rules for parking buses to prevent blockages at scheduled departure times. A mathematical programming procedure is used for assigning buses to runs. An interactive computer system supports parking and dispatching. This article describes the three tools and relates experience with their use.     

Boundedly rational user equilibria (BRUE): Mathematical formulation and solution sets

Boundedly rational user equilibria (BRUE) represent traffic flow distribution patterns where travellers can take any route whose travel cost is within an ‘indifference band’ of the shortest path cost. Those traffic flow patterns satisfying the above condition constitute a set, named the BRUE solution set. It is important to obtain all the BRUE flow patterns, because it can help predict the variation of the link flow pattern in a traffic network under the boundedly rational behavior assumption. However, the methodology of constructing the BRUE set has been lacking in the established literature. This paper fills the gap by constructing the BRUE solution set on traffic networks with fixed demands. After defining ε-BRUE, where ε is the indifference band for the perceived travel cost, we formulate the ε-BRUE problem as a nonlinear complementarity problem (NCP), so that a BRUE solution can be obtained by solving a BRUE–NCP formulation. To obtain the BRUE solution set encompassing all BRUE flow patterns, we propose a methodology of generating acceptable path set which may be utilized under the boundedly rational behavior assumption. We show that with the increase of the indifference band, the acceptable path set that contains boundedly rational equilibrium flows will be augmented, and the critical values of indifference band to augment these path sets can be identified by solving a family of mathematical programs with equilibrium constraints (MPEC) sequentially. The BRUE solution set can then be obtained by assigning all traffic demands to the acceptable path set. Various numerical examples are given to illustrate our findings.     

Train scheduling for minimizing passenger waiting time with time-dependent demand and skip-stop patterns: Nonlinear integer programming models with linear constraints

This paper focuses on how to minimize the total passenger waiting time at stations by computing and adjusting train timetables for a rail corridor with given time-varying origin-to-destination passenger demand matrices. Given predetermined train skip-stop patterns, a unified quadratic integer programming model with linear constraints is developed to jointly synchronize effective passenger loading time windows and train arrival and departure times at each station. A set of quadratic and quasi-quadratic objective functions are proposed to precisely formulate the total waiting time under both minute-dependent demand and hour-dependent demand volumes from different origin–destination pairs. We construct mathematically rigorous and algorithmically tractable nonlinear mixed integer programming models for both real-time scheduling and medium-term planning applications. The proposed models are implemented using general purpose high-level optimization solvers, and the model effectiveness is further examined through numerical experiments of real-world rail train timetabling test cases.     

A reliability‐based network design problem

This paper presents a reliability‐based network design problem. A network reliability concept is embedded into the continuous network design problem in which travelers' route choice behavior follows the stochastic user equilibrium assumption. A new capacity‐reliability index is introduced to measure the probability that all of the network links are operated below their capacities when serving different traffic patterns deviating from the average condition. The reliability‐based network design problem is formulated as a bi‐level program in which the lower level sub‐program is the probit‐based stochastic user equilibrium problem and the upper level sub‐program is the maximization of the new capacity reliability index. The lower level sub‐program is solved by a variant of the method of successive averages using the exponential average to represent the learning process of network users on a daily basis that results in the daily variation of traffic‐flow pattern, and Monte Carlo stochastic loading. The upper level sub‐program is tackled by means of genetic algorithms. A numerical example is used to demonstrate the concept of the proposed framework.     

Travel time prediction and departure time adjustment behavior dynamics in a congested traffic system

This paper examines two heuristic rules proposed for describing urban commuters' predictions of travel time as well as the adjustments of departure time in response to unacceptable arrivals in their daily commute under limited information. It is based on the notion that the magnitude of the predicted travel time depends on each commuter's own experience, including recallable travel time, schedule delay, and difficulties in searching for a satisfactory departure time. An explanatory analysis is first performed to compare these two rules, based on the information provided by a set of commuters interacting over 24 days through a simulated traffic system. A more elaborate model specification which captures the dynamic interrelation between the commuter's cumulative and recent experience with the traffic system's performance is then proposed. The model parameters are estimated with explicit consideration of the serial correlation arising from repeated decisions by the same individuals and the contemporaneous interaction with other system users' decisions through the traffic system's performance.     

Subsidized vehicle acquisition and earned income in the transition from welfare to work

Availability and affordability of reliable transportation – either through public transportation or individual ownership of automobiles – appears necessary to support a successful transition from welfare to work. One approach adopted by state and local governments is to subsidize vehicle acquisition by welfare recipients in transition. To date there are no empirical studies that analyze the impacts or effectiveness of these vehicle subsidy programs. The objective of this study is to examine the extent to which participation in a small-scale vehicle donation-and-sales program in Vermont increases earned income by individuals in transition from welfare to work. Using reduced-form random effects and censored regression models to account for the simultaneity of decisions to work and participate in welfare programs, we examine the impacts of this vehicle acquisition program for a small group of individuals. Our analyses indicate that the program results in a statistically significant increase in both earned income and the probability of employment.     

A Heuristic Algorithm for the Allocation of Airport Runway System Capacity

Abstract

This paper develops a heuristic algorithm for the allocation of airport runway capacity to minimise the cost of arrival and departure aircraft/flight delays. The algorithm is developed as a potential alternative to optimisation models based on linear and integer programming. The algorithm is based on heuristic (‘greedy’) criteria that closely reflect the ‘rules of thumb’ used by air traffic controllers. Using inputs such as arrival and departure demand, airport runway system capacity envelopes and cost of aircraft/flight delays, the main output minimises the cost of arrival and departure delays as well as the corresponding interdependent airport runway system arrival and departure capacity allocation. The algorithm is applied to traffic scenarios at three busy US airports. The results are used to validate the performance of the proposed heuristic algorithm against results from selected benchmarking optimisation models.     

Isolated intersection control for various levels of vehicle technology: Conventional,connected, and automated vehicles

Connected vehicle technology can be beneficial for traffic operations at intersections. The information provided by cars equipped with this technology can be used to design a more efficient signal control strategy. Moreover, it can be possible to control the trajectory of automated vehicles with a centralized controller. This paper builds on a previous signal control algorithm developed for connected vehicles in a simple, single intersection. It improves the previous work by (1) integrating three different stages of technology development; (2) developing a heuristics to switch the signal controls depending on the stage of technology; (3) increasing the computational efficiency with a branch and bound solution method; (4) incorporating trajectory design for automated vehicles; (5) using a Kalman filter to reduce the impact of measurement errors on the final solution. Three categories of vehicles are considered in this paper to represent different stages of this technology: conventional vehicles, connected but non-automated vehicles (connected vehicles), and automated vehicles. The proposed algorithm finds the optimal departure sequence to minimize the total delay based on position information. Within each departure sequence, the algorithm finds the optimal trajectory of automated vehicles that reduces total delay. The optimal departure sequence and trajectories are obtained by a branch and bound method, which shows the potential of generalizing this algorithm to a complex intersection.Simulations are conducted for different total flows, demand ratios and penetration rates of each technology stage (i.e. proportion of each category of vehicles). This algorithm is compared to an actuated signal control algorithm to evaluate its performance. The simulation results show an evident decrease in the total number of stops and delay when using the connected vehicle algorithm for the tested scenarios with information level of as low as 50%. Robustness of this algorithm to different input parameters and measurement noises are also evaluated. Results show that the algorithm is more sensitive to the arrival pattern in high flow scenarios. Results also show that the algorithm works well with the measurement noises. Finally, the results are used to develop a heuristic to switch between the different control algorithms, according to the total demand and penetration rate of each technology.     

A mixed-integer linear program for optimizing sensor locations along freeway corridors

How to optimally allocate limited freeway sensor resources is of great interest to transportation engineers. In this paper, we focus on the optimal allocation of point sensors, such as loop detectors, to minimize performance measurement errors. Although it has been shown that the minimization problem can be intuitively formulated as a nonlinear program, the formulation is so complex that only heuristic approaches can be used to solve the problem. In this paper, we transform the nonlinear program into an equivalent mixed-integer linear model. The linearized model is shown to have a graphical interpretation and can be solved using resource constrained shortest path algorithms. A customized Branch-and-Bound technique is then proposed to solve the resource constrained shortest path problem. Numerical experiments along an urban freeway corridor demonstrate that this sensor location model is successful in allocating loop detectors to improve the accuracy of travel time estimation.     

A three level location-inventory problem with correlated demand

This paper considers a three level location-inventory problem where demand across the retailers is assumed to be correlated. We first present a reformulation scheme by which the initial formulation is transformed into a mixed integer conic quadratic program. In addition, we propose a solution approach based on an outer approximation strategy and show the algorithmic advantage of such framework for this class of programs. The results from numerical experiments show that the proposed solution procedure clearly outperforms state-of-the-art commercial solvers. In addition, we show that neglecting the effect of correlation can lead to substantially sub-optimal solutions.     

Global optimization method for mixed transportation network design problem: A mixed-integer linear programming approach

This paper proposes a global optimization algorithm for solving a mixed (continuous/discrete) transportation network design problem (MNDP), which is generally expressed as a mathematical programming with equilibrium constraint (MPEC). The upper level of the MNDP aims to optimize the network performance via both expansion of existing links and addition of new candidate links, whereas the lower level is a traditional Wardrop user equilibrium (UE) problem. In this paper, we first formulate the UE condition as a variational inequality (VI) problem, which is defined from a finite number of extreme points of a link-flow feasible region. The MNDP is approximated as a piecewise-linear programming (P-LP) problem, which is then transformed into a mixed-integer linear programming (MILP) problem. A global optimization algorithm based on a cutting constraint method is developed for solving the MILP problem. Numerical examples are given to demonstrate the efficiency of the proposed method and to compare the results with alternative algorithms reported in the literature.     

Impact analysis of cordon-based congestion pricing on mode-split for a bimodal transportation network

This paper investigates the impact of cordon-based congestion pricing scheme on the mode-split of a bimodal transportation network with auto and rail travel modes. For any given toll-charge pattern, its impact on the mode-split can be estimated by solving a combined mode-split and traffic-assignment problem. Using a binary logit model for the mode-split, the combined problem is converted into a traffic-assignment problem with elastic demand. Probit-based stochastic user equilibrium (SUE) principle is adopted for this traffic-assignment problem, and a continuously distributed value of time (VOT) is assumed to convert the toll charges and transit fares into time-units. This combined mode-split and traffic-assignment problem is then formulated as a fixed-point model, which can be solved by a convergent Cost Averaging method. The combined mode-split and traffic-assignment problem is then used to analyze a multimodal toll design problem for cordon-based congestion pricing scheme, with the aim of increasing the mode-share of public transport system to a targeted level. Taking the fixed-point model as a constraint, the multimodal toll design problem is thus formulated as a mathematical programming with equilibrium constraints (MPEC) model. A genetic algorithm (GA) is employed to solve this MPEC model, which is then numerical validated by a network example.     

A model and optimization-based heuristic for the operational aircraft maintenance routing problem

This paper investigates the Operational Aircraft Maintenance Routing Problem (OAMRP). Given a set of flights for a specific homogeneous fleet type, this short-term planning problem requires building feasible aircraft routes that cover each flight exactly once and that satisfy maintenance requirements. Basically, these requirements enforce an aircraft to undergo a planned maintenance at a specified station before accumulating a maximum number of flying hours. This stage is significant to airline companies as it directly impacts the fleet availability, safety, and profitability. The contribution of this paper is twofold. First, we elucidate the complexity status of the OAMRP and we propose an exact mixed-integer programming model that includes a polynomial number of variables and constraints. Furthermore, we propose a graph reduction procedure and valid inequalities that aim at improving the model solvability. Second, we propose a very large-scale neighborhood search algorithm along with a procedure for computing tight lower bounds. We present the results of extensive computational experiments that were carried out on real-world flight networks and attest to the efficacy of the proposed exact and heuristic approaches. In particular, we provide evidence that the exact model delivers optimal solutions for instances with up to 354 flights and 8 aircraft, and that the heuristic approach consistently delivers high-quality solutions while requiring short CPU times.     

Optimal timetable development for community shuttle network with metro stations

This paper investigates an issue for optimizing synchronized timetable for community shuttles linked with metro service. Considering a passenger arrival distribution, the problem is formulated to optimize timetables for multiple community shuttle routes, with the objective of minimizing passenger’s schedule delay cost and transfer cost. Two constraints, i.e., vehicle capacity and fleet size, are modeled in this paper. The first constraint is treated as soft, and the latter one is handled by a proposed timetable generating method. Two algorithms are employed to solve the problem, i.e., a genetic algorithm (GA) and a Frank–Wolfe algorithm combined with a heuristic algorithm of shifting departure times (FW-SDT). FW-SDT is an algorithm specially designed for this problem. The simulated and real-life examples confirm the feasibility of the two algorithms, and demonstrate that FW-SDT outperforms GA in both accuracy and effectiveness.     

Coordinated platooning with multiple speeds

In a platoon, vehicles travel one after another with small intervehicle distances; trailing vehicles in a platoon save fuel because they experience less aerodynamic drag. This work presents a coordinated platooning model with multiple speed options that integrates scheduling, routing, speed selection, and platoon formation/dissolution in a mixed-integer linear program that minimizes the total fuel consumed by a set of vehicles while traveling between their respective origins and destinations. The performance of this model is numerically tested on a grid network and the Chicago-area highway network. We find that the fuel-savings factor of a multivehicle system significantly depends on the time each vehicle is allowed to stay in the network; this time affects vehicles’ available speed choices, possible routes, and the amount of time for coordinating platoon formation. For problem instances with a large number of vehicles, we propose and test a heuristic decomposed approach that applies a clustering algorithm to partition the set of vehicles and then routes each group separately. When the set of vehicles is large and the available computational time is small, the decomposed approach finds significantly better solutions than does the full model.     

Optimal shipment decisions for an airfreight forwarder: Formulation and solution methods

We study the freight forwarder’s shipment planning problem in an airfreight forwarding network where a set of cargo shipments have to be transported to given destinations. We provide mixed integer programming formulations that use piecewise-linear cargo rates and account for volume and weight constraints, flight departure/arrival times, as well as shipment-ready times.After exploring the solution of such models using CPLEX, we devise two solution methodologies to handle large problem sizes. The first is based on Lagrangian relaxation, where the problems decompose into a set of knapsack problems and a set of network flow problems. The second is a local branching heuristic that combines branching ideas and local search. The two approaches show promising results in providing good quality heuristic solutions within reasonable computational times, for difficult and large shipment consolidation problems.     

Dynamic green bike repositioning problem – A hybrid rolling horizon artificial bee colony algorithm approach

This paper introduces a new dynamic green bike repositioning problem (DGBRP) that simultaneously minimizes the total unmet demand of the bike-sharing system and the fuel and CO₂ emission cost of the repositioning vehicle over an operational period. The problem determines the route and the number of bikes loaded and unloaded at each visited node over a multi-period operational horizon during which the cycling demand at each node varies from time to time. To handle the dynamic nature of the problem, this study adopts a rolling horizon approach to break down the proposed problem into a set of stages, in which a static bike repositioning sub-problem is solved in each stage. An enhanced artificial bee colony (EABC) algorithm and a route truncation heuristic are jointly used to optimize the route design in each stage, and the loading and unloading heuristic is used to tackle the loading and unloading sub-problem along the route in a given stage. Numerical results show that the EABC algorithm outperforms Genetic Algorithm in solving the routing sub-problem. Computation experiments are performed to illustrate the effect of the stage duration on the two objective values, and the results show that longer stage duration leads to higher total unmet demand and total fuel and CO₂ emission cost. Numerical studies are also performed to illustrate the effects of the weight and the loading and unloading times on the two objective values and the tradeoff between the two objectives.