长途跨线高速列车直达与中转选择问题

我国快速客运网基本形成,长途跨线列车直达与中转选择对于高速列车开行方案设计至关重要。为提升长途跨线高速列车开行效益和服务品质,按长途跨线列车直达与中转方式对比的思路,以旅客出行需求、基础设施能力、移动设备能力等多方面因素对长途跨线列车开行方式的影响为约束条件,研究长途跨线列车直达与中转选择模型及求解方法。选取2025年15个长途跨线起讫点为对象进行案例研究,提出D站—E站、F站—D站等9个起迄点之间开行长途跨线直达列车的建议方案,研究表明直达与中转换乘选择模型能够解决长途跨线列车开行方案编制问题。     

A capacity restraint transit assignment with elastic line frequency

This paper proposes a new formulation for the capacity restraint transit assignment problem with elastic line frequency, in which the line frequency is related to the passenger flows on transit lines. A stochastic user equilibrium transit assignment model with congestion and elastic line frequency is proposed and the equivalent mathematical programming problem is also formulated. Since the passenger waiting time and the line capacity are dependent on the line frequency, a fixed point problem with respect to the line frequency is devised accordingly. The existence of the fixed point problem has been proved. A solution algorithm for the proposed model is presented. Finally, a numerical example is used to illustrate the application of the proposed model and solution algorithm.     

Optimal slack time for timed transfers at a transit terminal

At transit terminals where two routes interchange passengers, total system costs may be reduced by allowing some “slack” time in the vehicle schedules to decrease the probability of missed connections. Transfer cost functions are formulated and used to determine optimal slack time for simple systems with transfers between one bus route and one rail line. Some analytic results are derived for empirical discrete and Gumbel distributions of bus arrival times. Relations between the optimal slack times and headways, transfer volumes, passenger time values, bus operating costs, and standard deviations of bus and train arrivals are also developed numerically using normally distributed arrivals. However, the proposed numerical approach can optimize slack times for any observed arrival distributions. The results provide some guidelines on desirable slack times and show that schedule coordination between the two routes is not worth attempting when standard deviations of arrivals exceed certain levels. Possible extensions of this work are suggested in the last section.     

Precise estimation of connections of metro passengers from Smart Card data

The aim of this study is to estimate both the physical and schedule-based connections of metro passengers from their entry and exit times at the gates and the stations, a data set available from Smart Card transactions in a majority of train networks. By examining the Smart Card data, we will observe a set of transit behaviors of metro passengers, which is manifested by the time intervals that identifies the boarding, transferring, or alighting train at a station. The authenticity of the time intervals is ensured by separating a set of passengers whose trip has a unique connection that is predominantly better by all respects than any alternative connection. Since the connections of such passengers, known as reference passengers, can be readily determined and hence their gate times and stations can be used to derive reliable time intervals. To detect an unknown path of a passenger, the proposed method checks, for each alternative connection, if it admits a sequence of boarding, middle train(s), and alighting trains, whose time intervals are all consistent with the gate times and stations of the passenger, a necessary condition of a true connection. Tested on weekly 32 million trips, the proposed method detected unique connections satisfying the necessary condition, which are, therefore, most likely true physical and schedule-based connections in 92.6 and 83.4 %, respectively, of the cases.     

Train rescheduling model with train delay and passenger impatience time in urban subway network

This paper considers the train rescheduling problem with train delay in urban subway network. With the objective of minimizing the negative effect of train delay to passengers, which is quantified with a weighted combination of travel time cost and the cost of giving up the planned trips, train rescheduling model is proposed to jointly synchronize both train delay operation constraints and passenger behavior choices. Space–time network is proposed to describe passenger schedule‐based path choices and obtain the shortest travel times. Impatience time is defined to describe the intolerance of passengers to train delay. By comparing the increased travel time due to train delay with the passenger impatience time, a binary variable is defined to represent whether the passenger will give up their planned trips or not. The proposed train rescheduling model is implemented using genetic algorithm, and the model effectiveness is further examined through numerical experiments of real‐world urban subway train timetabling test. Duration effects of the train delay to the optimization results are analyzed. Copyright © 2017 John Wiley & Sons, Ltd.     

Passenger-demands-oriented train scheduling for an urban rail transit network

This paper considers the train scheduling problem for an urban rail transit network. We propose an event-driven model that involves three types of events, i.e., departure events, arrival events, and passenger arrival rates change events. The routing of the arriving passengers at transfer stations is also included in the train scheduling model. Moreover, the passenger transfer behavior (i.e., walking times and transfer times of passengers) is also taken into account in the model formulation. The resulting optimization problem is a real-valued nonlinear nonconvex problem. Nonlinear programming approaches (e.g., sequential quadratic programming) and evolutionary algorithms (e.g., genetic algorithms) can be used to solve this train scheduling problem. The effectiveness of the event-driven model is evaluated through a case study.     

User perspectives in public transport timetable optimisation

The present paper deals with timetable optimisation from the perspective of minimising the waiting time experienced by passengers when transferring either to or from a bus. Due to its inherent complexity, this bi-level minimisation problem is extremely difficult to solve mathematically, since timetable optimisation is a non-linear non-convex mixed integer problem, with passenger flows defined by the route choice model, whereas the route choice model is a non-linear non-continuous mapping of the timetable. Therefore, a heuristic solution approach is developed in this paper, based on the idea of varying and optimising the offset of the bus lines. Varying the offset for a bus line impacts the waiting time passengers experience at any transfer stop on the bus line.In the bi-level timetable optimisation problem, the lower level is a transit assignment calculation yielding passengers’ route choice. This is used as weight when minimising waiting time by applying a Tabu Search algorithm to adapt the offset values for bus lines. The updated timetable then serves as input in the following transit assignment calculation. The process continues until convergence.The heuristic solution approach was applied on the large-scale public transport network in Denmark. The timetable optimisation approach yielded a yearly reduction in weighted waiting time equivalent to approximately 45 million Danish kroner (9 million USD).     

A practical model for transfer optimization in a transit network: Model formulations and solutions

This paper studies the transit network scheduling problem and aims to minimize the waiting time at transfer stations. First, the problem is formulated as a mixed integer programming model that gives the departure times of vehicles in lines so that passengers can transfer between lines at transfer stations with minimum waiting times. Then, the model is expanded to a second model by considering the extra stopping time of vehicles at transfer stations as a new variable set. By calculating the optimal values for these variables, transfers can be better performed. The sizes of the models, compared with the existing models, are small enough that the models can be solved for small- and medium-sized networks using regular MIP solvers, such as CPLEX. Moreover, a genetic algorithm approach is represented to more easily solve larger networks. A simple network is used to describe the models, and a medium-sized, real-life network is used to compare the proposed models with another existing model in the literature. The results demonstrate significant improvement. Finally, a large-scale, real-life network is used as a case study to evaluate the proposed models and the genetic algorithm approach.     

Train scheduling for minimizing passenger waiting time with time-dependent demand and skip-stop patterns: Nonlinear integer programming models with linear constraints

This paper focuses on how to minimize the total passenger waiting time at stations by computing and adjusting train timetables for a rail corridor with given time-varying origin-to-destination passenger demand matrices. Given predetermined train skip-stop patterns, a unified quadratic integer programming model with linear constraints is developed to jointly synchronize effective passenger loading time windows and train arrival and departure times at each station. A set of quadratic and quasi-quadratic objective functions are proposed to precisely formulate the total waiting time under both minute-dependent demand and hour-dependent demand volumes from different origin–destination pairs. We construct mathematically rigorous and algorithmically tractable nonlinear mixed integer programming models for both real-time scheduling and medium-term planning applications. The proposed models are implemented using general purpose high-level optimization solvers, and the model effectiveness is further examined through numerical experiments of real-world rail train timetabling test cases.     

A hierarchical line planning approach for a large-scale high speed rail network: The China case

Planning a set of train lines in a large-scale high speed rail (HSR) network is typically influenced by issues of longer travel distance, high transport demand, track capacity constraints, and a non-periodic timetable. In this paper, we describe an integrated hierarchical approach to determine line plans by defining the stations and trains according to two classes. Based on a bi-level programming model, heuristics are developed for two consecutive stages corresponding to each classification. The approach determines day-period based train line frequencies as well as a combination of various stopping patterns for a mix of fast trunk line services between major stations and a variety of slower body lines that offer service to intermediate stations, so as to satisfy the predicted passenger transport demand. Efficiencies of the line plans described herein concern passenger travel times, train capacity occupancy, and the number of transfers. Moreover, our heuristics allow for combining many additional conflicting demand–supply factors to design a line plan with predominantly cost-oriented and/or customer-oriented objectives. A range of scenarios are developed to generate three line plans for a real-world example of the HSR network in China using a decision support system. The performance of potential train schedules is evaluated to further examine the feasibility of the obtained line plans through graphical timetables.     

A reliability-based assignment method for railway networks with heterogeneous passengers

Travel reliability can play an important role in shaping travelers’ route choice behavior. This paper develops a railway passenger assignment method to capture the reliability-based route choices, where the trains can have stochastic delays. The overall travel reliability has two components: the travel time reliability (of trains) and the associated transfer reliability (of connections). In this context, mean-and-variance-based effective travel cost is adopted to model passengers’ evaluation of different travel options in the railway network. Moreover, passengers are heterogeneous as they may evaluate the effective travel cost differently, and they may have different requirements for the successful transfer probability (if transfers are involved in the trip). The determination of travel time reliability (of trains) is based on the travel delay distribution, and the successful transfer probability is calculated based on the delay probabilities of two trains in the transfer process. An algorithm has been designed for solving the model, and numerical examples are presented to test and illustrate the model.     

An equity‐based passenger flow control model with application to Hong Kong‐Shenzhen border‐crossing

Cross‐border passengers from Hong Kong to Shenzhen by the east Kowloon‐Canton Railway (KCR) through the Lo Wu customs exceed nearly 200 thousand on a special day such as a day during the Chinese Spring Festival. Such heavy passenger demand often exceeds the processing and holding capacity of the Lo Wu customs for many hours a day. Thus, passengers must be metered off at all entrance stations along the KCR line through ticket rationing to restrain the number of passengers waiting at Lo Wu within its safe holding capacity. This paper proposes an optimal control strategy and model to deal with this passenger crowding and control problem. Because the maximum passenger checkout rate at Lo Wu is fixed, total passenger waiting time is not affected by the control strategy for given time‐dependent arriving rates at each station. An equity‐based control strategy is thus proposed to equalize the waiting times of passengers arriving at all stations at the same time. This equity is achieved through optimal allocation of the total quota of tickets to all entrance stations for each train service. The total ticket quota for each train service is determined such that the capacity constraint of the passenger queue at Lo Wu is satisfied. The control problem is formulated as a successive linear programming problem and demonstrated for the KCR system with partially simulated data.     

基于组合模型的公路客运量预测研究

随着客运量与经济发展的联系越来越密切,如何更科学有效地对客运量进行预测变得越来越重要。文章分别介绍了灰色系统法、时间序列法、Elman神经网络及组合预测的方法原理,并以兰州市公路客运量为例,运用灰色模型、时间序列模型和Elman神经网络模型的组合模型进行客流预测,验证了该组合模型的合理性。     

An integrated Bayesian approach for passenger flow assignment in metro networks

This paper proposes an integrated Bayesian statistical inference framework to characterize passenger flow assignment model in a complex metro network. In doing so, we combine network cost attribute estimation and passenger route choice modeling using Bayesian inference. We build the posterior density by taking the likelihood of observing passenger travel times provided by smart card data and our prior knowledge about the studied metro network. Given the high-dimensional nature of parameters in this framework, we apply the variable-at-a-time Metropolis sampling algorithm to estimate the mean and Bayesian confidence interval for each parameter in turn. As a numerical example, this integrated approach is applied on the metro network in Singapore. Our result shows that link travel time exhibits a considerable coefficient of variation about 0.17, suggesting that travel time reliability is of high importance to metro operation. The estimation of route choice parameters conforms with previous survey-based studies, showing that the disutility of transfer time is about twice of that of in-vehicle travel time in Singapore metro system.     

Equity-oriented skip-stopping schedule optimization in an oversaturated urban rail transit network

In this study, we focus on improving system-wide equity performance in an oversaturated urban rail transit network based on multi-commodity flow formulation. From the system perspective, an urban rail transit network is a distributed system, where a set of resources (i.e., train capacity) is shared by a number of users (i.e., passengers), and equitable individuals and groups should receive equal shares of resources. However, when oversaturation occurs in an urban rail transit network during peak hours, passengers waiting at different stations may receive varying shares of train capacity leading to the inequity problem under train all-stopping pattern. Train skip-stopping pattern is an effective operational approach, which holds back some passengers at stations and re-routes their journeys in the time dimension based on the available capacity of each train. In this study, the inequity problem in an oversaturated urban rail transit network is analyzed using a multi-commodity flow modeling framework. In detail, first, discretized states, corresponding to the number of missed trains for passengers, are constructed in a space-time-state three-dimensional network, so that the system-wide equity performance can be viewed as a distribution of all passengers in different states. Different from existing flow-based optimization models, we formulate individual passenger and train stopping pattern as commodity and network structure in the multi-commodity flow-modeling framework, respectively. Then, we aim to find an optimal commodity flow and well-designed network structure through the proposed multi-commodity flow model and simultaneously achieve the equitable distribution of all passengers and the optimal train skip-stopping pattern. To quickly solve the proposed model and find an optimal train skip-stopping pattern with preferable system-wide equity performance, the proposed linear programming model can be effectively decomposed to a least-cost sub-problem with positive arc costs for each individual passenger and a least-cost sub-problem with negative arc costs for each individual train under a Lagrangian relaxation framework. For application and implementation, the proposed train skip-stopping optimization model is applied to a simple case and a real-world case based on Batong Line in the Beijing Subway Network. The simple case demonstrates that our proposed Lagrangian relaxation framework can obtain the approximate optimal solution with a small-gap lower bound and a lot of computing time saved compared with CPLEX solver. The real-world case based on Batong Line in the Beijing Subway Network compares the equity and efficiency indices under the operational approach of train skip-stopping pattern with those under the train all-stopping pattern to state the advantage of the train skip-stopping operational approach.     

Timetable optimization models and methods for minimizing passenger waiting time at public transit terminals

This paper focuses on developing mathematical optimization models for the train timetabling problem with respect to dynamic travel demand and capacity constraints. The train scheduling models presented in this paper aim to minimize passenger waiting times at public transit terminals. Linear and non-linear formulations of the problem are presented. The non-linear formulation is then improved through introducing service frequency variables. Heuristic rules are suggested and embedded in the improved non-linear formulation to reduce the computational time effort needed to find the upper bound. The effectiveness of the proposed train timetabling models is illustrated through the application to an underground urban rail line in the city of Tehran. The results demonstrate the effectiveness of the proposed demand-oriented train timetabling models, in terms of decreasing passenger waiting times. Compared to the baseline and regular timetables, total waiting time is reduced by 6.36% and 10.55% respectively, through the proposed mathematical optimization models.     

Dispatching control at transfer stations in multi‐hub transit networks

Among dispatching control approaches, the holding option has attracted the most attention in bus control. However, holding a vehicle at a transfer station may exacerbate the delays because more passengers might accumulate at downstream stations and may also affect other connecting routes at other transfer stations. Our problem is to minimize the total costs of dispatching ready vehicles at each transfer station along coordinated routes in a multi‐hub transit network. The total costs include the waiting cost for on‐board passengers, the missed connection costs for late arrival passengers at the subject transfer station and possible transfer costs at downstream transfer stations. We develop a heuristic algorithm to optimize the holding times based on real time information about late vehicles. The results show that ready vehicles should be held longer when the arrival variances of late vehicles are small or when many late connecting passengers are expected.     

Long-term planning for ring-radial urban rail transit networks

Extensive work exists on regular rail network planning. However, few studies exist on the planning and design of ring-radial rail transit systems. With more ring transit lines being planned and built in Asia, Europe and the America's, a detailed study on ring transit lines is timely. An analytical model to find the optimal number of radial lines in a city for any demand distribution is first introduced. Secondly, passenger route choice for different rail networks is analyzed, for a many-to-many Origin-Destination (OD) demand distribution, based on a total travel time cost per passenger basis. The routes considered are: (1) radial lines only; (2) ring line only or radial lines and ring line combined; or (3) direct access to a destination without using the rail system. Mathematica and Matlab are used to code the route choice model. A cost-benefit optimization model to identify the feasibility and optimality of a ring line is proposed. Unlike simulations and agent-based models, this model is shown to be easily transferable to many ring-radial transit networks. The City of Calgary is used as an example to illustrate the applicability of each model. The existing urban rail network and trip distribution are major influencing factors in judging the feasibility and optimal location of the ring line. This study shows the potential net benefit of introducing a ring line by assessing changes in passengers’ costs. The changes in passenger cost parameters, such as ride cost and access cost, are shown to greatly influence the feasibility of a ring line.     

Modelling waiting time for passengers transferring from rail to buses

This paper develops a mathematical model to calculate the average waiting time for passengers transferring from rail transit to buses based on the statistical analysis of primary data collected in Beijing. An important part of the average waiting time modelling is to analyse the distributions of passenger arrival rates. It is shown that the lognormal and gamma distributions have the best fit for direct transfer and non-direct transfer passengers, respectively. Subsequently, an average waiting time model for transferring passengers is developed based on passenger arrival rate distributions. Furthermore, case studies are conducted for two scenarios with real and estimated data, resulting in relative errors of ?3.69% and ?3.77%, respectively. Finally, the paper analyses the impacts of bus headway, the headway of rail cars, and the proportion of direct transfer passengers on average waiting time.     

Not All Transfers Are Created Equal: Towards a Framework Relating Transfer Connectivity to Travel Behaviour

Abstract

Walking from origins to transit stops, transferring between transit lines and walking from transit stops to destinations—all add to the burden of transit travel, sometimes to a very large degree. Transfers in particular can be stressful and/or time‐consuming for travellers, discouraging transit use. As such, transit facilities that reduce the burdens of walking, waiting and transferring can substantially increase transit system efficacy and use. In this paper, we argue that transit planning research on transit stops and stations, and transit planning practice frequently lack a clear conceptual framework relating transit waits and transfers with what we know about travel behaviour. Therefore, we draw on the concepts of transfer penalties and value of time in the travel behaviour/economics literature to develop a framework that situates transfer penalties within the total travel generalized costs of a transit trip. For example, value of time is important in relating actual time of waiting and walking to the perceived time of travel. We also draw on research to classify factors most important to users’ perspectives and travel behaviour—transfer costs, time scheduling and five transfer facility attributes: (1) access, (2) connection and reliability, (3) information, (4) amenities, and (5) security and safety. Using this framework, we seek to explicitly relate improvements of transfer stops/stations with components of transfer penalties and changes in travel behaviour (through a reduction in transfer penalties). We conclude that the employment of such a framework can help practitioners better apply the most effective improvements to transit stops and transfer facilities.