Timetable optimization models and methods for minimizing passenger waiting time at public transit terminals

This paper focuses on developing mathematical optimization models for the train timetabling problem with respect to dynamic travel demand and capacity constraints. The train scheduling models presented in this paper aim to minimize passenger waiting times at public transit terminals. Linear and non-linear formulations of the problem are presented. The non-linear formulation is then improved through introducing service frequency variables. Heuristic rules are suggested and embedded in the improved non-linear formulation to reduce the computational time effort needed to find the upper bound. The effectiveness of the proposed train timetabling models is illustrated through the application to an underground urban rail line in the city of Tehran. The results demonstrate the effectiveness of the proposed demand-oriented train timetabling models, in terms of decreasing passenger waiting times. Compared to the baseline and regular timetables, total waiting time is reduced by 6.36% and 10.55% respectively, through the proposed mathematical optimization models.     

An equity‐based passenger flow control model with application to Hong Kong‐Shenzhen border‐crossing

Cross‐border passengers from Hong Kong to Shenzhen by the east Kowloon‐Canton Railway (KCR) through the Lo Wu customs exceed nearly 200 thousand on a special day such as a day during the Chinese Spring Festival. Such heavy passenger demand often exceeds the processing and holding capacity of the Lo Wu customs for many hours a day. Thus, passengers must be metered off at all entrance stations along the KCR line through ticket rationing to restrain the number of passengers waiting at Lo Wu within its safe holding capacity. This paper proposes an optimal control strategy and model to deal with this passenger crowding and control problem. Because the maximum passenger checkout rate at Lo Wu is fixed, total passenger waiting time is not affected by the control strategy for given time‐dependent arriving rates at each station. An equity‐based control strategy is thus proposed to equalize the waiting times of passengers arriving at all stations at the same time. This equity is achieved through optimal allocation of the total quota of tickets to all entrance stations for each train service. The total ticket quota for each train service is determined such that the capacity constraint of the passenger queue at Lo Wu is satisfied. The control problem is formulated as a successive linear programming problem and demonstrated for the KCR system with partially simulated data.     

Simultaneous passenger train routing and timetabling using an efficient train-based Lagrangian relaxation decomposition

This paper focuses on the simultaneous passenger train routing and timetabling problem on the rail network consisting of both unidirectional and bidirectional tracks using an efficient train-based Lagrangian relaxation decomposition. We first build an integer linear programming model with many 0–1 binary and non-negative integer decision variables, after then reformulate it as a train path-choice model for providing an easier train-based Lagrangian relaxation decomposition mechanism based on the construction of space-time discretized network extending from node-cell-based rail network. Moreover, through reformulating safety usage interval restrictions with a smaller number of constraints in this reformulated model, the train-based decomposition needs fewer Lagrangian multipliers to relax these constraints. On the basis of this decomposition, a solving framework including a heuristic algorithm is proposed to simultaneously optimize both the dual and feasible solutions. A set of numerical experiments demonstrate the proposed Lagrangian relaxation decomposition approach has better performances in terms of minimizing both train travel time and computational times.     

A multiobjective planning model for intercity train seat allocation

This paper presents a multiobjective planning model for generating optimal train seat allocation plans on an intercity rail line serving passengers with many‐to‐many origin‐destination pairs. Two planning objectives of the model are to maximise the operator's total passenger revenue and to minimise the passenger's total discomfort level. For a given set of travel demand, train capacity, and train stop‐schedules, the model is solved by fuzzy mathematical programming to generate a best‐compromise train seat allocation plan. The plan determines how many reserved and non‐reserved seats are to be allocated at each origin station for all subsequent destination stations on each train run operated within a specified operating period. An empirical study on the to‐be‐built Taiwan's high‐speed rail system is conducted to demonstrate the effectiveness of the model. The model can be used for any setting of travel demand and stop‐schedules with various train seating capacities.     

Development of efficient stop planning optimization process for high‐speed rail systems

The Taiwan High Speed Rail (THSR) has recently added three additional stations to its original network. Although the three additional stations can improve accessibility to the system, these new stations can present difficulties in the transportation planning process, particularly for planning of train stops. The additional stations may benefit some passengers, but may also lengthen the travel time for the other passengers. Therefore, the main challenge faced by THSR is finding an efficient way to design appropriate stopping patterns. Past studies on stop planning usually adopted meta‐heuristics or decomposition methods to solve this complex problem. Although these solution techniques can improve solution efficiency, none of them can guarantee the optimality of the solution and capture the transfer movement of different stopping patterns. In this research, we proposed an innovative network structure to address complex stop planning problems for high‐speed rail systems. Given its special network structure, two binary integer programming models were developed to simultaneously form and determine the optimal stopping patterns for real‐world THSR stop planning problems. An optimization process was also developed to accurately estimate the station transfer time corresponding to the variation in stopping patterns and passenger flow. Results of the case studies suggest that the proposed binary integer programming models exhibit superior solution quality and efficiency over existing exact optimization models. Consequently, using this stop planning optimization process can help high‐speed rail system planners in designing optimal stopping patterns that correspond to passenger demand. Copyright © 2017 John Wiley & Sons, Ltd.     

Equity-oriented skip-stopping schedule optimization in an oversaturated urban rail transit network

In this study, we focus on improving system-wide equity performance in an oversaturated urban rail transit network based on multi-commodity flow formulation. From the system perspective, an urban rail transit network is a distributed system, where a set of resources (i.e., train capacity) is shared by a number of users (i.e., passengers), and equitable individuals and groups should receive equal shares of resources. However, when oversaturation occurs in an urban rail transit network during peak hours, passengers waiting at different stations may receive varying shares of train capacity leading to the inequity problem under train all-stopping pattern. Train skip-stopping pattern is an effective operational approach, which holds back some passengers at stations and re-routes their journeys in the time dimension based on the available capacity of each train. In this study, the inequity problem in an oversaturated urban rail transit network is analyzed using a multi-commodity flow modeling framework. In detail, first, discretized states, corresponding to the number of missed trains for passengers, are constructed in a space-time-state three-dimensional network, so that the system-wide equity performance can be viewed as a distribution of all passengers in different states. Different from existing flow-based optimization models, we formulate individual passenger and train stopping pattern as commodity and network structure in the multi-commodity flow-modeling framework, respectively. Then, we aim to find an optimal commodity flow and well-designed network structure through the proposed multi-commodity flow model and simultaneously achieve the equitable distribution of all passengers and the optimal train skip-stopping pattern. To quickly solve the proposed model and find an optimal train skip-stopping pattern with preferable system-wide equity performance, the proposed linear programming model can be effectively decomposed to a least-cost sub-problem with positive arc costs for each individual passenger and a least-cost sub-problem with negative arc costs for each individual train under a Lagrangian relaxation framework. For application and implementation, the proposed train skip-stopping optimization model is applied to a simple case and a real-world case based on Batong Line in the Beijing Subway Network. The simple case demonstrates that our proposed Lagrangian relaxation framework can obtain the approximate optimal solution with a small-gap lower bound and a lot of computing time saved compared with CPLEX solver. The real-world case based on Batong Line in the Beijing Subway Network compares the equity and efficiency indices under the operational approach of train skip-stopping pattern with those under the train all-stopping pattern to state the advantage of the train skip-stopping operational approach.     

A bi-level model for single-line rail timetable design with consideration of demand and capacity

This paper proposes a bi-level model to solve the timetable design problem for an urban rail line. The upper level model aims at determining the headways between trains to minimize total passenger cost, which includes not only the usual perceived travel time cost, but also penalties during travel. With the headways given by the upper level model, passengers’ arrival times at their origin stops are determined by the lower level model, in which the cost-minimizing behavior of each passenger is taken into account. To make the model more realistic, explicit capacity constraints of individual trains are considered. With these constraints, passengers cannot board a full train, but wait in queues for the next coming train. A two-stage genetic algorithm incorporating the method of successive averages is introduced to solve the bi-level model. Two hypothetical examples and a real world case are employed to evaluate the effectiveness of the proposed bi-level model and algorithm. Results show that the bi-level model performs well in reducing total passenger cost, especially in reducing waiting time cost and penalties. And the section loading-rates of trains in the optimized timetable are more balanced than the even-headway timetable. The sensitivity analyses show that passenger’s desired arrival time interval at destination and crowding penalty factor have a high influence on the optimal solution. And with the dispersing of passengers' desired arrival time intervals or the increase of crowding penalty factor, the section loading-rates of trains become more balanced.     

Designing an integrated distribution system for catering services for high-speed railways: A three-echelon location routing model with tight time windows and time deadlines

An emerging task in catering services for high-speed railways (CSHR) is to design a distribution system for the delivery of high-quality perishable food products to trains in need. This paper proposes a novel model for integrating location decision making with daily rail catering operations, which are affected by various aspects of rail planning, to meet time-sensitive passenger demands. A three-echelon location routing problem with time windows and time budget constraints (3E-LRPTWTBC) is thus proposed toward formulating this integrated distribution system design problem. This model attempts to determine the capacities/locations of distribution centers and to optimize the number of meals delivered to stations. The model also attempts to generate a schedule for refrigerated cars traveling from distribution centers to rail stations for train loading whereby meals can be catered to trains within tight time windows and sold before a specified time deadline. By relaxing the time-window constraints, a relaxation model that can be solved using an off-the-shelf mixed integer programming (MIP) solver is obtained to provide a lower bound on the 3E-LRPTWTBC. A hybrid cross entropy algorithm (HCEA) is proposed to solve the 3E-LRPTWTBC. A small-scale case study is implemented, which reveals a 9.3% gap between the solution obtained using the HCEA and that obtained using the relaxation model (RM). A comparative analysis of the HCEA and an exhaustive enumeration algorithm indicates that the HCEA shows good performance in terms of computation time. Finally, a case study considering 156 trains on the Beijing-Shanghai high-speed corridor and a large-scale case study considering 1130 trains on the Chinese railway network are addressed in a comprehensive study to demonstrate the applicability of the proposed models and algorithm.     

Passenger-demands-oriented train scheduling for an urban rail transit network

This paper considers the train scheduling problem for an urban rail transit network. We propose an event-driven model that involves three types of events, i.e., departure events, arrival events, and passenger arrival rates change events. The routing of the arriving passengers at transfer stations is also included in the train scheduling model. Moreover, the passenger transfer behavior (i.e., walking times and transfer times of passengers) is also taken into account in the model formulation. The resulting optimization problem is a real-valued nonlinear nonconvex problem. Nonlinear programming approaches (e.g., sequential quadratic programming) and evolutionary algorithms (e.g., genetic algorithms) can be used to solve this train scheduling problem. The effectiveness of the event-driven model is evaluated through a case study.     

Energy-efficient metro train rescheduling with uncertain time-variant passenger demands: An approximate dynamic programming approach

In a heavily congested metro line, unexpected disturbances often occur to cause the delay of the traveling passengers, infeasibility of the current timetable and reduction of the operational efficiency. Due to the uncertain and dynamic characteristics of passenger demands, the commonly used method to recover from disturbances in practice is to change the timetable and rolling stock manually based on the experiences and professional judgements. In this paper, we develop a stochastic programming model for metro train rescheduling problem in order to jointly reduce the time delay of affected passengers, their total traveling time and operational costs of trains. To capture the complexity of passenger traveling characteristics, the arriving ratio of passengers at each station is modeled as a non-homogeneous poisson distribution, in which the intensity function is treated as time-varying origin-to-destination passenger demand matrices. By considering the number of on-board passengers, the total energy usage is modeled as the difference between the tractive energy consumption and the regenerative energy. Then, we design an approximate dynamic programming based algorithm to solve the proposed model, which can obtain a high-quality solution in a short time. Finally, numerical examples with real-world data sets are implemented to verify the effectiveness and robustness of the proposed approaches.     

Crowding in public transport systems: Effects on users,operation and implications for the estimation of demand

The effects of high passenger density at bus stops, at rail stations, inside buses and trains are diverse. This paper examines the multiple dimensions of passenger crowding related to public transport demand, supply and operations, including effects on operating speed, waiting time, travel time reliability, passengers’ wellbeing, valuation of waiting and in-vehicle time savings, route and bus choice, and optimal levels of frequency, vehicle size and fare. Secondly, crowding externalities are estimated for rail and bus services in Sydney, in order to show the impact of crowding on the estimated value of in-vehicle time savings and demand prediction. Using Multinomial Logit (MNL) and Error Components (EC) models, we show that alternative assumptions concerning the threshold load factor that triggers a crowding externality effect do have an influence on the value of travel time (VTTS) for low occupancy levels (all passengers sitting); however, for high occupancy levels, alternative crowding models estimate similar VTTS. Importantly, if demand for a public transport service is estimated without explicit consideration of crowding as a source of disutility for passengers, demand will be overestimated if the service is designed to have a number of standees beyond a threshold, as analytically shown using a MNL choice model. More research is needed to explore if these findings hold with more complex choice models and in other contexts.     

Passenger arrival and waiting time distributions dependent on train service frequency and station characteristics: A smart card data analysis

Waiting time at public transport stops is perceived by passengers to be more onerous than in-vehicle time, hence it strongly influences the attractiveness and use of public transport. Transport models traditionally assume that average waiting times are half the service headway by assuming random passenger arrivals. However, research agree that two distinct passenger behaviour types exist: one group arrives randomly, whereas another group actively tries to minimise their waiting time by arriving in a timely manner at the scheduled departure time. This study proposes a general framework for estimating passenger waiting times which incorporates the arrival patterns of these two groups explicitly, namely by using a mixture distribution consisting of a uniform and a beta distribution. The framework is empirically validated using a large-scale automatic fare collection system from the Greater Copenhagen Area covering metro, suburban, and regional rail stations thereby giving a range of service headways from 2 to 60 min. It was shown that the proposed mixture distribution is superior to other distributions proposed in the literature. This can improve waiting time estimations in public transport models. The results show that even at 5-min headways 43% of passengers arrive in a timely manner to stations when timetables are available. The results bear important policy implications in terms of providing actual timetables, even at high service frequencies, in order for passengers to be able to minimise their waiting times.     

Demand-driven timetable design for metro services

Timetable design is crucial to the metro service reliability. A straightforward and commonly adopted strategy in daily operation is a peak/off-peak-based schedule. However, such a strategy may fail to meet dynamic temporal passenger demand, resulting in long passenger waiting time at platforms and over-crowding in trains. Thanks to the emergence of smart card-based automated fare collection systems, we can now better quantify spatial–temporal demand on a microscopic level. In this paper, we formulate three optimization models to design demand-sensitive timetables by demonstrating train operation using equivalent time (interval). The first model aims at making the timetable more dynamic; the second model is an extension allowing for capacity constraints. The third model aims at designing a capacitated demand-sensitive peak/off-peak timetable. We assessed the performance of these three models and conducted sensitivity analyzes on different parameters on a metro line in Singapore, finding that dynamical timetable built with capacity constraints is most advantageous. Finally, we conclude our study and discuss the implications of the three models: the capacitated model provides a timetable which shows best performance under fixed capacity constraints, while the uncapacitated model may offer optimal temporal train configuration. Although we imposed capacity constraints when designing the optimal peak/off-peak timetable, its performance is not as good as models with dynamical headways. However, it shows advantages such as being easier to operate and more understandable to the passengers.     

Non-discriminatory train dispatching in a rail transport market with multiple competing and collaborative train operating companies

Train dispatching is vital for the punctuality of train services, which is critical for a train operating company (TOC) to maintain its competitiveness. Due to the introduction of competition in the railway transport market, the issue of discrimination is attracting more and more attention. This paper focuses on delivering non-discriminatory train dispatching solutions while multiple TOCs are competing in a rail transport market, and investigating impacting factors of the inequity of train dispatching solutions. A mixed integer linear programming (MILP) model is first proposed, in which the inequity of competitors (i.e., trains and TOCs) is formalized by a set of constraints. In order to provide a more flexible framework, a model is further reformulated where the inequity of competitors is formalized as the maximum individual deviation of competitors’ delay cost from average delay cost in the objective function. Complex infrastructure capacity constraints are considered and modelled through a big M-based approach. The proposed models are solved by a standard MILP solver. A set of comprehensive experiments is conducted on a real-world dataset adapted from the Dutch railway network to test the efficiency, effectiveness, and applicability of the proposed models, as well as determine the trade-off between train delays and delay equity.     

Long-term planning for ring-radial urban rail transit networks

Extensive work exists on regular rail network planning. However, few studies exist on the planning and design of ring-radial rail transit systems. With more ring transit lines being planned and built in Asia, Europe and the America's, a detailed study on ring transit lines is timely. An analytical model to find the optimal number of radial lines in a city for any demand distribution is first introduced. Secondly, passenger route choice for different rail networks is analyzed, for a many-to-many Origin-Destination (OD) demand distribution, based on a total travel time cost per passenger basis. The routes considered are: (1) radial lines only; (2) ring line only or radial lines and ring line combined; or (3) direct access to a destination without using the rail system. Mathematica and Matlab are used to code the route choice model. A cost-benefit optimization model to identify the feasibility and optimality of a ring line is proposed. Unlike simulations and agent-based models, this model is shown to be easily transferable to many ring-radial transit networks. The City of Calgary is used as an example to illustrate the applicability of each model. The existing urban rail network and trip distribution are major influencing factors in judging the feasibility and optimal location of the ring line. This study shows the potential net benefit of introducing a ring line by assessing changes in passengers’ costs. The changes in passenger cost parameters, such as ride cost and access cost, are shown to greatly influence the feasibility of a ring line.     

A tabu search algorithm to solve the integrated planning of container on an inter-terminal network connected with a hinterland rail network

Transport demand for containers has been increasing for decades, which places pressure on road transport. As a result, rail transport is stimulated to provide better intermodal freight transport services. This paper investigates mathematical models for the planning of container movements in a port area, integrating the inter-terminal transport of containers (ITT, within the port area) with the rail freight formation and transport process (towards the hinterland). An integer linear programming model is used to formulate the container transport across operations at container terminals, the network interconnecting them, railway yards and the railway networks towards the hinterland. A tabu search algorithm is proposed to solve the problem. The practical applicability of the algorithm is tested in a realistic infrastructure case and different demand scenarios. Our results show the degree by which internal (ITT) and external (hinterland) transport processes interact, and the potential for improvement of overall operations when the integrated optimization proposed is used. Instead, if the planning of containers in the ITT system is optimized as a stand-alone problem, the railway terminals may suffer from longer delay times or additional train cancellations. When planning the transport of 4060 TEU containers within one day, the benefits of the ITT planning without considering railway operations account for 17% ITT cost reduction but 93% railway operational cost growth, while the benefits of integrating ITT and railway account for a reduction of 20% in ITT cost and 44% in railway operational costs.     

Assessing the financial and social costs of public transport in differing operating environments and with endogenous demand

This paper uses a previously developed spreadsheet cost model which simulates public transport modes operated on a 12-km route to analyse the total costs of different passenger demand levels. The previous cost model was a very powerful tool to estimate the social and operator costs for different public transport technologies. However, as the model is strategic, some basic assumptions were made which are relaxed in this paper. First, the speed-flow equation in the original spreadsheet model assumes that speed decreases according to the ratio of the current frequency and the lane capacity which is based on the safety headway without taking into account passenger boardings. However, this may vary in different operating environments. Therefore, the speed-flow equation is improved by moving from a linear equation to a piecewise equation that considers the features of different operating environments. Second, the model assumes that supply is sufficient to meet demand. However, when the level of demand is high for the lower-capacity public transport technologies, passengers may find the incoming vehicle full and therefore, they have to wait more than one service interval. This paper applies queuing theory to investigate the probability of having to wait longer than the expected service headways which will affect the average passenger waiting time. The extra waiting time for each passenger is calculated and applied in the spreadsheet cost model. Third, the original model assumed that demand was externally fixed (exogenous). To evaluate the differences after applying these equations, endogenous demand rather than exogenous demand will be investigated by using the elasticities for passenger waiting time and journey time.     

弹性需求下的轨道交通客流分配模型和算法研究

文章分析了轨道交通客流需求量的影响因素,以拥挤条件下的出行阻抗函数为基础,通过引入弹性需求条件下的轨道交通均衡配流条件,构建了弹性需求的均衡配流模型。根据模型的特点,给出了改进的用于求解弹性需求下的轨道交通均衡配流模型的Frank-wolfe算法。最后通过一个算例说明了算法的有效性和合理性。     

Rail line length in a crosstown corridor with many-to-many demand

An analytical model that determines the optimal location and length of rail line along a crosstown transportation corridor with the objective of minimizing the total transportation cost is presented. A general, many-to-many passenger demand pattern is considered. The objective function, which includes the rail and bus riding costs, rail and bus operating costs, rail fleet costs and rail line costs, is minimized by using the classical optimization method with the aid of a computer program developed for the model. The model is applied to the Northwest-South transportation corridor in Calgary, Alberta, and the sensitivity of the optimal rail line location and length to the unit cost and demand parameters at their reasonable ranges is tested. It is found that although the total passenger demand, unit rail line cost, and unit bus operating cost have greater influence than the unit bus and rail riding costs, and unit rail fleet and operating costs, the optimal line length is generally insensitive to all these parameters. It is also found that the length of the existing LRT line in the corridor is comparable to the optimal line length obtained from the model, but the existing line should be extended further south in order to meet the heavier demand in that direction optimally.     

A practical model for transfer optimization in a transit network: Model formulations and solutions

This paper studies the transit network scheduling problem and aims to minimize the waiting time at transfer stations. First, the problem is formulated as a mixed integer programming model that gives the departure times of vehicles in lines so that passengers can transfer between lines at transfer stations with minimum waiting times. Then, the model is expanded to a second model by considering the extra stopping time of vehicles at transfer stations as a new variable set. By calculating the optimal values for these variables, transfers can be better performed. The sizes of the models, compared with the existing models, are small enough that the models can be solved for small- and medium-sized networks using regular MIP solvers, such as CPLEX. Moreover, a genetic algorithm approach is represented to more easily solve larger networks. A simple network is used to describe the models, and a medium-sized, real-life network is used to compare the proposed models with another existing model in the literature. The results demonstrate significant improvement. Finally, a large-scale, real-life network is used as a case study to evaluate the proposed models and the genetic algorithm approach.