共查询到20条相似文献,搜索用时 171 毫秒
1.
当前浮式平台船体结构分析的方法与重点综述(英文) 总被引:2,自引:0,他引:2
浮式平台概念的选择及其结构设计是深水工程项目的关键环节之一.它决定了平台在波浪载荷作用下的动力学响应、立管在深水条件下的运动以及进行平台建造与安装的技术难度等.结构强度、结构的抗疲劳性能以及结构的整体和局部稳定性能是浮式平台设计必须重点考虑的三个主要方面.总结了当前浮式平台设计的主要方法和它的主要任务以及技术要求,着重分析了设计过程中的主要技术难点及重点;最后,讨论了浮式平台结构设计的潜在发展趋势. 相似文献
2.
南海某深水半潜式生产平台有着超大跨距的桁架式上部组块以及带立柱储油功能的下部船体,其大跨距、超高度的典型特点给深水半潜式平台整体建造精度控制带来极大挑战。通过制定整体的精度策划方案,重点对总装搭载、立柱顶部支撑管、插尖导向等关键位置进行精度控制方法研究,对环境温度、焊接收缩等影响精度的数据进行收集、分析,进而调整优化精度控制方案,形成一整套适用于深水半潜式生产平台建造精度控制的技术方法,保证深水半潜式生产平台建造精度满足设计要求,为上部组块与下部浮体大合龙的顺利完成奠定基础。 相似文献
3.
深中通道建设采用了中部大月池开孔的回字形浮式平台用于海底整平清淤工作,基于整平清淤平台的设计开发,分析确定回字形浮体结构设计的控制载荷工况,预报各控制设计工况的波浪载荷,并计算各工况下平台的结构总强度,探讨回字形浮式结构设计应关注的重点关键区域。梳理针对该类型浮式结构总强度直接计算的方法。结果表明,对于带有大开口的回形浮式结构,总强度计算中应重点关注结构整体扭转工况,结构设计中可采用在浮体角隅处设置抗扭箱型结构提高整体的抗扭能力。该研究可为回字形浮式结构或相似海洋工程结构物的结构设计提供参考。 相似文献
4.
深水油气田的开发推动了深水浮式平台技术的发展,目前已有三类深水浮式平台在国外深水油气田开发中得到应用,Spar平台是其中的一种。随着我国南海深水油气资源的不断发现,提出了对深水浮式平台技术的需求。南海深水气田是在中国南海深水海域发现的第一个深水气田,为了验证深水桁架式Spar平台在南海深水气田开发中的可行性,我们对深水桁架式Spar平台设计技术进行了研究,Spar平台上部设施、设备总体布置也为主要研究内容。本文介绍Spar平台的发展历程,研究了Spar平台上部设施、设备总体布置方法,以及Spar平台上部设施设备的布置应考虑的要点,以供本领域研究设计人员了解参考。 相似文献
5.
本文介绍了一种新概念浮式结构物——浮式塔(FT)。浮式塔的基本设计模型是一具有软张力腿的浮式结构物。本文分析了环境条件对于浮式塔动力响应的影响,并将浮式塔、柱型平台和半潜式平台进行了比较。研究结果表明,浮式塔的耐波性能非常良好,在任何情况下其最大垂荡、纵荡和纵摇幅度都明显小于柱型平台,特别适于在深水中进行生产、储存和卸载。 相似文献
6.
通过在顶升装置顶部设计一种U型工装,使滑移横梁位于U型工装内部。在上部组块滑移至下部船体顶部且其重量转移至U型工装之后,将滑移横梁撤出,从而解决上部组块同步下降时连接框架与滑移横梁碰撞的问题,实现框架连接式大型浮式平台的整体合龙。 相似文献
7.
8.
9.
10.
11.
12.
介绍了我国港口资源的整合现状,指出港口整合可以提升港口的形象和地位,也为区域经济和城市的发展注入强大的动力。最后指出在港口资源整合中要避免的几个问题。 相似文献
13.
广州集装箱码头的轮胎式场桥小车制动器使用10多年后,出现了许多问题,故进行了改造.分析了轮胎式集装箱龙门起重机小车制动器的主要故障现象,提出了改造方案,并加以实施. 相似文献
14.
本文对现有的选定球面轴承的三种工程方法进行了分析比较.引入了“合力系数”,并给出了合力方向上投影面积的精确解. 相似文献
15.
16.
17.
18.
分析柴油机故障中常见的机体裂纹故障原因,认为由于设计缺陷和管理及操作不当,易造成船舶柴油机缸体上的裂纹多发生在气缸套凸肩处。如不及时处理这些裂纹和故障,就会造成缸套的裂纹直至出现缸套漏水等严重后果,针对NANTAIQUEEN轮柴油机对该类型故障的检修提出具体措施。 相似文献
19.
The hydrophysical and hydrochemical structure of the Sea of Azov, with developed bottom anoxia, was studied during the RV “Akvanavt” cruise from July 31 to August 03, 2001. The anoxic zone with a thickness from 0.5 to 4 m above the bottom was found in all deep regions of the Sea. Concentrations of hydrochemical parameters were similar to the pronounced anoxic conditions (about 90 mmol m− 3 of hydrogen sulfide, 17 mmol m− 3 of ammonia, 6 mmol m− 3 of phosphate, 7 mmol m− 3 of total manganese). The hydrophysical structure was characterized by the uniform distribution of temperature in the upper 6–7 m mixed layer (UML). Below this a thin (0.4–0.8 m) thermocline layer was observed, just above the anoxic waters. Formation of this phenomenon was connected with that summer weather conditions. Intensive rains led to increased influx of river waters in June. That resulted in large input of allochtonous organic matter (OM) and inorganic nutrients; the latter were consumed on the additional autochthonous organic matter production. In July the weather was characterized by a significant rise in the daily averaged air temperature and large oscillations of temperature during the day. In this period a wind of constant direction was absent, but wind bursts were observed. The completed analyses showed that the formation of such a structure could be connected with the following factors: (i) positive growth trends of the daily averaged temperature and the daily oscillations of temperature, (ii) presence of wind bursts. The joint action of these factors resulted in the formation of the UML. The amplitude of wind bursts determined the depth of UML, and the value of trend determined the value of the temperature change in the thermocline. An initial presence of bottom halocline (caused by the Black Sea water influx to the bottom of the Sea of Azov) prevented the heating of the bottom layer and therefore led to an increase of vertical gradient of temperature in the thermocline. The spatial distribution of the turbulent exchange coefficient confirmed the existence of a “stagnation” area located above the anoxia zone, which is also, apparently, the reason for its occurrence. 相似文献
20.