首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 218 毫秒
1.
A novel joint source channel distortion model was proposed, which can essentially estimate the average distortion in progressive image transmission. To improve the precision of the model, the redundancy generated by a forbidden symbol in the arithmetic codes is used to distinguish the quantization distortion and the channel distortion, all the coefficients from the first error one to the end of the sequence are set to be a value within the variance range of the coefficients instead of zero, then the error propagation coming from the entropy coding can be essentially estimated, which is disregarded in the most conventional joint source channel coding (JSCC) systems. The precision of the model in terms of average peak-signal-to-noise has been improved about 0.5 dB compared to classical works. An efficient unequal error protection system based on the model is developed, and can be used in the wireless communication systems.  相似文献   

2.
在无线视频传输环境端到端失真分析的基础上,针对H.264视频流建立了一种新的端到端失真模型.在使用LDPC信道编码方式与该失真分析模型的基础上,提出了一种基于端到端失真优化的联合信源信道编码方案.该方案根据当前无线信道的信噪比与信道带宽等状态信息,自适应地调节信源编码量化参数和信道编码码率,使端到端失真最小.实验结果表明,与固定码率编码相比,本文提出的联合信源信道编码方案可在不增加带宽的情况下显著提高视频传输质量.  相似文献   

3.
在Turbo码编码、译码基本理论和结构的基础上,提出了一种用Simulink构建的Turbo码编、译码可控仿真模型,并在BPSK(binary phase-shift keying)调制的高斯白噪声信道(AWGN)中进行了系统建模和仿真实验.通过研究Turbo编码、卷积编码和无信道编码方案仿真系统的BER(bit error rate)性能,结果表明,所提出的Turbo编码的误码率优于其他2种方案1个数量级以上,尤低信噪比时更具优势.  相似文献   

4.
An approximately optimal adaptive arithmetic coding (AC) system using a forbidden symbol (FS) over noisy channels was proposed which allows one to jointly and adaptively design the source decoding and channel correcting in a single process, with superior performance compared with traditional separated techniques. The concept of adaptiveness is applied not only to the source model but also to the amount of coding redundancy. In addition, an improved branch metric computing algorithm and a faster sequential searching algorithm compared with the system proposed by Grangetto were proposed. The proposed system is tested in the case of image transmission over the AWGN channel, and compared with traditional separated system in terms of packet error rate and complexity. Both hard and soft decoding were taken into account.  相似文献   

5.
IntroductionBlock truncation coding( BTC) [1] is a simple andfast lossy image coding technique,which has theadvantage of being easy to implement comparedto transform coding and vector quantization[2 ] .Its simplicity,performance and channel error re-sisting capability make it attractive in the real-time image transmission.BTC is a one- bit adap-tive moment- preserving quantizer that preservescertain statistical moments of small blocks of theinput image in the quantized output.The origi-nal …  相似文献   

6.
A new arithmetic coding system combining source channel coding and maximum a posteriori decoding were proposed. It combines source coding and error correction tasks into one unified process by introducing an adaptive forbidden symbol. The proposed system achieves fixed length code words by adaptively adjusting the probability of the forbidden symbol and adding tail digits of variable length. The corresponding improved MAP decoding metric was derived. The proposed system can improve the performance. Simulations were performed on AWGN channels with various noise levels by using both hard and soft decision with BPSK modulation.The results show its performance is slightly better than that of our adaptive arithmetic error correcting coding system using a forbidden symbol.  相似文献   

7.
In time division duplex(TDD)beamforming systems,the base station estimates the channel state information(CSI)at transmitter based on uplink pilots and then uses it to generate the beamforming vector in the downlink transmission.Because of the constraints of the TDD frame structure and the uplink pilot overhead,there inevitably exists CSI delay and channel estimation error between CSI estimation and downlink transmission channel,which would degrade system ergodic rate.In this paper,we propose a robust ergodic rate transmission scheme,in which the uplink pilot time interval(UPTI)of an active user is adaptively adjusted according to the changing channel conditions such as Doppler frequency shift,uplink pilot signal to noise ratio(SNR),to minimize the impact of CSI delay and channel estimation error on the ergodic rate of TDD beamforming systems.In order to get the optimal UPTI,we first derive the average post-processing SNR for TDD beamforming systems with channel estimation error and CSI delay.We then obtain the optimal UPTI,which maximizes the average post-processing SNR,given the normalized pilot overhead(the number of pilot symbols per data symbol).The numerical simulation results validate that the the proposed robust ergodic rate transmission scheme not only maximizes the average post-processing SNR but also maximizes the system ergodic rate.Moreover,the scheme can adapt well to the changing channel environments compared with the current fixed UPTI scheme.Especially our research is valuable for the uplink sounding reference signal design in long term evolution advanced(LTEAdvanced)system.  相似文献   

8.
An iterative transmit power allocation (PA) algorithm was proposed for group-wise space-time block coding (G-STBC) systems with group-wise successive interference cancellation (GSIC) receivers. Group-wise interference suppression (GIS) filters are employed to separate each group's transmit signals from other interferences and noise. While the total power on all transmit symbols is constrained, all transmit PA coefficients are updated jointly according to the channel information at each iteration. Through PA, each detection symbol has the same post-detection signal to interference-and-noise ratio (SINR). The simulation results verify that the proposed PA algorithm converges at the equilibrium quickly after few iterations, and it achieves much lower bit error rates than the previous single symbol SIC PA and the fixed ratio PA algorithms for G-STBC systems with GSIC receivers .  相似文献   

9.
为了实现对高精度图像进行高效压缩,同时确保重建图像的弱目标区域有较好的保真效果,提出了一种提升弱目标区域质量的基于误差优化编码的高精度图像压缩算法. 首先,使用JPEG-LS (joint photographic experts group lossless)压缩算法对图像数据进行压缩,在游程编码过程中自适应地选择需要二次编码的误差数据,并完成了基于视觉质量的非均匀量化;其次,对量化值进行数据分解,去除量化值之间的相关性,并对分解后的数据进行MQ算术编码的熵编码;图像重建时根据量化间隔重建反量化值,并设计了反量化优化和滤波优化过程;最后,将本文算法与JPEG-LS、JPEG2000 (joint photographic experts group 2000)算法进行了性能比较,结果表明:本算法能够实现高精度图像数据的高效压缩,且复杂度低,易于硬件实现,虽然引入了误差数据二次优化编码等过程,但增加编码的数据量较小,故与JPEG-LS算法的压缩速度相当,然而比JPEG2000算法的压缩速度提升4.47倍;同时有效减少了常规算法造成的信息损失,重建图像的峰值信噪比与JPEG-LS、JPEG2000相当或略低,但弱目标区域的视觉质量及保真效果更好.   相似文献   

10.
提高航线需求预测精度是航空客运收益管理系统的重要研究课题。提出一种首先运用EM算法对航线历史订座数据中由于受资源限制而没有被满足的需求进行修复,取得更为准确的需求数据,然后,针对航班销售具有提前预订的特点,将航线历史订座数据整合成一个提前日矩阵,使预测时能够利用更多的已知信息并减少了计算数据量,最后再运用Winters模型进行预测的航线需求预测方法。以成都到广州航线历史数据为例仿真计算,预测结果的平均误差为4.9% ,而直接采用winters法进行预测的平均误差为21.7% ,验证了算法的可行性和有效性。  相似文献   

11.
Active tamper detection using watermarking technique can localize the tampered area and recover the lost information. In this paper, we propose an approach that the watermark is robust to legitimate lossy compression, fragile to malicious tampering and capable of recovery. We embed the watermark bits in the direct current value of energy concentration transform domain coefficients. Let the original watermark bits be content dependent and apply error correction coding to them before embedded to the image. While indicating the tampered area, the extracted bits from a suspicious image can be further decoded and then used to roughly recover the corresponding area. We also theoretically study the image quality and bit error rate. Experimental results demonstrate the effectiveness of the proposed scheme.  相似文献   

12.
为了实现岩体结构面切向刚度和法向刚度的便捷化精准取值,准确分析结构面变形行为特征,以关山隧道闪长岩结构面为例,对结构面形貌信息进行数字化提取,应用3D打印技术制作结构面试样,开展单轴压缩与各向异性直剪试验,提出了各向异性新形貌参数,建立了结构面切向刚度与法向刚度计算新模型。研究结果表明:新形貌参数综合考虑了结构面起伏体上坡段的爬坡角与爬坡高度,有利于反映结构面形貌的各向异性特征,并且同一方向上结构面剖面线的形貌参数服从对数正态概率分布;在物理模型力学试验的基础上,结合结构面形貌参数、结构面壁面强度和法向应力构建的结构面切向刚度计算新模型,不仅降低了计算参数的获取难度,还可以更好地体现结构面切向变形能力的各向异性;改进的双曲函数法向刚度计算模型考虑了结构面初始法向刚度和最大法向闭合量与结构面壁面强度之间的量化关系,避免了复杂的力学测试,简化了法向刚度的获取过程;通过与经典计算模型和力学试验结果进行对比,发现采用新模型计算的刚度更为接近试验值,其中切向刚度与试验值的平均相对误差为2.09%~27.88%,法向刚度与试验值的平均相对误差为3.25%~17.25%,表明结构面切向刚度和法向刚度计算新模型可以更准确和便捷地获取结构面变形参数。   相似文献   

13.
The paper proposed a new MPEG-2 rate control method that is based on model classification. The macro-blocks are classified according to their prediction errors, and different parameters are used in the rate-quantization and distortion quantization model. The different model parameters are calculated from the previous frame of the same type in the process of coding. These models are used to estimate the relations among rate, distortion and quantization of the current frame. Further steps, such as R-D optimization based quantization adjustment and smoothing of quantization of adjacent macroblocks, are used to improve the quality. The results of the experiments prove that the technique is effective and can be realized easily. The method presented in the paper can be a good way for MPEG rate control.  相似文献   

14.
提出将具有不等差错保护特性数字喷泉码作为欧标高速铁路应答器报文编码方案.由于其不依赖重传、译码过程与编码符号到达译码端次序无关等特性非常适于应答器报文传输场景.针对欧标应答器报文长度特征,本文在不同码长条件下对基于权重的不等差错保护算法、拓展窗口喷泉码及复制窗口不等保护算法的性能进行对比分析,通过Matlab仿真得到3种算法在不同码长条件下的性能.验证采用基于喷泉码的不等差错保护方法作为铁路应答器长报文编码方案的可行性.  相似文献   

15.
无链表图像感兴趣区域编码算法   总被引:1,自引:0,他引:1  
针对基于链表实现的感兴趣区域编码算法占用存储资源较多的问题,提出了一种无链表的编码算法.在SPIHT(等级树集合分裂)编码过程中,采用标志位图表示系数和集合的重要件信息;优先编码感兴趣区域,利用队列缓存非感兴趣区域系数和集合信息;编码非感兴趣区域时,从队列中恢复编码所需的重要件信息.编码过程不需要提升感兴趣区域小波系数,能实现感兴趣区域重建质量的精确控制.仿真实验表明,该算法优于提升小波系数的感兴趣区域编码算法;当编码码率为1 bpp(比特/像素)时,其存储需求仅为链表实现的感兴趣区域分离编码算法的1/10.  相似文献   

16.
短时交通流预测模型   总被引:2,自引:0,他引:2  
针对短时交通流变化周期性与随机性的特点,提出了新的混合预测模型,包含非参数回归模型与BP神经网络模型2种单项模型。非参数回归模型利用相关历史交通流数据,通过数据库匹配操作,确定预测结果,以充分体现交通流的周期稳定性。采用3层BP神经网络模型反映交通流的动态与非线性特点。采用模糊控制算法确定各单项模型的权重,并按不同权重有效组合成新的混合模型。采用西安市某路段30d的交通流量数据验证混合模型的预测效果。试验结果表明:该混合模型的平均相对误差为1.26%,最大相对误差为3.53%,其预测精度明显高于单项模型单独预测时的精度,能较准确地反映交通流真实情况。  相似文献   

17.
The quenching of a metal component with a channel section in a water tank is numerically simulated. Computational fluid dynamics (CFD) is used to model the multiphase flow and the heat transfer in film boiling, nucleate boiling and convective cooling processes to calculate the difference in heat transfer rate around the component and then combining with the thermal simulation and structure analysis of the component to study the effect of heat transfer rate on the distortion of the U-channel component. A model is also established to calculate the residual stress produced by quenching. The coupling fluid-thermal-structural simulation provides an insight into the deformation of the component and can be used to perform parameter analysis to reduce the distortion of the component.  相似文献   

18.
介绍了短距离无线通信系统中信道编码技术方案的具体实现过程。原始数据通过卷积编码和交织等差错控制编码技术后传输,很好的解决了实际应用中误码率高、硬件解决成本高的技术难题,为在现有窄带设备上进行高速数据传输提供了一种新方法。  相似文献   

19.
IntroductionDirectsequencespreadspectrummultipleaccess(DS/SSMA)systemcanofferhighercapacitythanfrequencyhoppingspreadspectrummulti-pleaccess(FH/SSMA)system,butthecapacityofthesystemdependsgreatlyonthepoweroftheuser'sreceivedsignals,thatisso-callednea…  相似文献   

20.
Short-term forecast of urban traffic flow is very important to intelligent transportation. Although the conventional methods have some advantages, to some extent, in improving the traffic forecast’s precision, it is still hard to achieve high accuracy. In this paper, we propose a short-term traffic flow forecasting method, which is based on the hybrid particle swarm optimization-neural network(HPSO-NN) with error compensation mechanism.In HPSO-NN, the hybrid PSO algorithm is employed to train the structures and parameters of the feed-forward advanced neural network, while the error compensation mechanism is employed to improve the accuracy. HPSONN is used to forecast the vehicle velocity in Shanghai North-South Viaduct. Experimental results show that the HPSO-NN, compared with the auto-regressive and moving average(ARMA) model, can forecast traffic flow with a higher accuracy. What’s more, we have also found that HPSO-NN with error compensation mechanism has better performance than that of HPSO-NN alone.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号