共查询到20条相似文献,搜索用时 430 毫秒
1.
2.
为研究隧道工程中防排水施工技术.本文首先对隧道工程发生渗漏的原因进行分析,针对不同条件制定不同隧道防排水设计原则,重点研究了防排水施工工艺,提出不同施工过程中的防排水处理方法,可为同公路隧道防排水技术应用提供借鉴和参考. 相似文献
3.
为了解决富水隧道防排水问题,保证富水隧道的结构安全,首先,阐述高海拔地区富水隧道防排水施工技术应用的重要性及关键问题,其次,深入分析相应的防排水施工技术应用,再次,详细探讨高海拔地区富水隧道防排水施工技术,最后,提出应用防排水施工技术的优化措施,以供参考。 相似文献
4.
5.
文章结合在建的青岛胶州湾隧道工程,对隧道防排水原则、防排水系统设计、防排水材料室内实验及防排水系统施工质量控制等方面进行了研究.提出预埋可重复注浆管、设置渗水盲管检查井等工程措施,使隧道防排水系统具有可维护性;通过室内试验,提出了防排水材料抵抗海水侵蚀能力的检测方法及标准,并提出了隧道防排水系统的施工质量控制措施. 相似文献
6.
为了加强高原高寒地区隧道防排水质量控制,结合高原高寒地区公路隧道特点,从设计和施工两个方面,分析高原高寒地区隧道防排水设计重点和施工质量控制要点,并且提出加强高原高寒地区隧道防排水质量控制的措施及质量检测验收方法,以供类似工程参考借鉴。 相似文献
7.
黄土隧道防排水施工技术 总被引:1,自引:0,他引:1
防水要求高是公路隧道特点之一,隧道防排水的成败影响其使用寿命及运营管理,黄延高速公路道南隧道是一座土质隧道,隧道所在区普遍有地下水,而且隧道路面位于地下水位之下.针对道南隧道的施工特点,阐述了防排水施工工艺. 相似文献
8.
为了能够更有效地保证公路交通的安全通畅,从复杂地质条件对公路隧道施工的影响、渗漏水病害的危害、病害原因分析、公路隧道防排水施工质量控制措施分析等方面对公路隧道渗漏水病害成因及防排水施工质量控制措施进行研究,以供参考。 相似文献
9.
对于无自然排水条件、采用全封闭防水结构的城市水体隧道而言,隧道本体混凝土的防水抗渗能力尤为重要。文章介绍了生物岛—大学城隧道防水设计原则、隧道沉管段大体积混凝土防渗抗裂技术、变形缝及施工缝防水处理工艺、基坑和干坞内防排水相结合的施工方法,分析总结了隧道渗水产生的原因及相关治理技术、经验,可供类似工程设计、施工参考。 相似文献
10.
11.
文章介绍了粤赣高速公路隧道工程的防排水设计与施工工艺。粤赣高速公路通过采取将隧道初期支护防水和二次衬砌防排水体系相结合,采用新材料,新工艺,按照“以排为主,防、截、排、堵相结合”的综合治理原则,取得了良好的治理效果,为山区高速公路隧道的防排水设计与施工提供参考。 相似文献
12.
文章分析了关角隧道地下水的赋存条件与分布规律,以及地下水补、径、排特征;详细计算了隧道涌水量,根据洞内、洞外、斜井的不同情况,采取了不同的防排水措施;并对搞好特长隧道施工过程中的防排水提出了建议。 相似文献
13.
郑西客运专线秦东大断面黄土隧道防排水技术 总被引:1,自引:0,他引:1
文章结合郑西客运专线大断面黄土隧道——秦东隧道工程实例,针对客运专线隧道防排水技术标准高和质量要求严等特点,就如何解决大断面黄土隧道防排水设计和施工中的难题进行了总结,对类似工程施工有较强的借鉴意义。 相似文献
14.
15.
16.
富水区隧道涌水遵循“以堵为主、防排结合”的处置原则,其中排水体系构建的合理性是隧道安全施工与良好运营的关键因素。首先分析隧道排水体系,揭示其工作原理,然后利用FLAC 3D有限差分软件,对鸿图特长隧道富水断层区设置的不同环向盲管间距进行三维流固耦合模拟,通过分析渗水压力、锚杆受力及涌水量,揭示塑性区体积及分布区域特征。研究结果表明:沿隧道轴向,支护结构孔隙水压力大致呈周期性分布,其周期近似等于环向盲管纵向间距;加密环向盲管,在降低支护结构受力并减小塑性区体积的同时,会增加隧道排水量;随环向盲管间距的增大,注浆加固圈塑性区首先出现在围岩好的区域,断层区出现塑性区最晚;断层区锚杆加固效果较差,可通过减小钢拱架环向间距以提高结构刚度,使注浆加固圈沿轴向受力更合理。综合考虑各种因素,建议在建工程断层区环向盲管间距设置为3 m,断层附近区间距为4 m。 相似文献
17.
高速公路单向交通隧道内最大纵坡设计研究 总被引:1,自引:0,他引:1
文章根据对隧道内施工运输、排水和通风等最大纵坡控制因素的分析,提出了隧道内单向交通连续上坡路段最大纵坡的建议值,以及长大隧道内增大坡度的技术措施,可供公路设计参考和借鉴。 相似文献
18.
文章针对邵怀高速公路雪峰山特长深埋隧道排水设计及施工现状,通过众多方法比较分析,优选采用灰色理论来预测隧道开挖距离与涌水量问的关系,以预测隧道开挖后总的涌水量,为中心水沟管径大小设计提供依据,对指导隧道施工具有现实意义。 相似文献
19.
Deep-buried water-storage and drainage shield tunnels, which are different from road and subway shield tunnels in terms of computation theory, construction technology and operation maintenance, would bear high inner water pressure and large earth pressure. In view of the change of the bearing mode for the lining structure of water-storage and drainage shield tunnels, a full-ring test and numerical analysis are carried out to study the influence of inner water pressure, staggered joint assembly and bolt installation types on the behaviors of water-storage and drainage shield tunnels. The results show that the deformation of the straight-jointed water-storage and drainage shield tunnel varies greatly from the state of empty water to that of full water; and the vertical and horizontal convergence deformations of the tunnel with inner water pressure of 0.6 MPa are 2.2 times and 3.2 times of that without inner water pressure, respectively. The convergence deformation, and the maximum joint opening and bolt tension of stagger-jointed lining structure decrease by 15%-25% and 25%- 40%, respectively, compared with that of the straight-jointed water-storage and drainage shield tunnel. The bolts at the segmental joints will yield because of the increase of inner water pressure and the first occurrence of bolt yield phenomenon is located near the position on the lining structure which is under the action of maximum negative bending moment; because the failure of shield tunnel is always caused by the yield of joint bolts, this position is the weak point for the deep-buried water-storage and drainage shield tunnel. For the water-storage and drainage shield tunnel based on the connection with double rows of bolts, the bolts near the outer arc surface of segmental joints in the area of 90 degree in the vault and arch bottom can be removed; the bolts near the inner arc surface of the segmental joints within the 90 degree of the haunch must be installed, otherwise, the tensile force of the bolts at the segmental joint near the maximum negative bending moment will increase by 5%-14%. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved. 相似文献
20.
新大瑶山隧道穿越砂岩段揭露一高压出水点,出水点压力为3~4 MPa,流量为430 m3/h左右,水头喷射距离达47m,在突水治理中采取了引排水、施作止水墙、顶水注浆和全断面帷幕注浆综合技术措施,成功地封堵了高压突水,取得了理想的技术经济效果.文章介绍了新大瑶山隧道的工程概况、工程地质及水文地质条件,以及涌突水情况和治理措施. 相似文献