共查询到20条相似文献，搜索用时 15 毫秒
1.
梁状浮筏隔振系统的降价建模方法 总被引：2，自引：0，他引：2
本文提出了一种梁状浮筏隔振系统结构形式。该系统是由２根自由－自由梁和连接民梁、梁与基础的弹簧及阻尼组成。为了减少在动力分析和结构动力优化设计中的计算工作量,本文提出了一种降价建模方法。由该方法得到的降价系统,能够很好地保留由示缩聚有限元模型建立起来的系统低阶动特性。与部件模态综合法相比,该方法形成降价系统的总刚度矩阵和质量矩阵过程简单,且计算结果通常不需要坐标转换即可求得系统的动力响应, 实例计算 相似文献
2.
Soft yoke mooring system (SYMs) is a single-point mooring system used in shallow water oil and gas development. In general, SYMs consists of mooring framework support, mooring legs, yoke, and single-point turret and it forms a multibody dynamic system with 13 hinge joint structures such as universal joints and thrust bearings. The hinge joint is one of the key components of SYMs; therefore, it is necessary to accurately evaluate the operating behavior of the hinge joints. In this study, real-time damage identification is conducted based on the multibody dynamic features of the SYMs. First, a long-term monitoring strategy for the prototype application is developed based on the multibody governing equations of the SYMs. The motion behaviors and stress state of the hinge joints and bodies are calculated using prototype monitoring data. A hinge joint damage identification based on the virtual moment is proposed by considering the changes in the friction coefficient in the damage state. The virtual moment method is used to transform the damage identification problem of the SYMs into a problem of seeking the optimal solution to the dynamics identification function. Genetic algorithm (GA) is implemented to seek the optimal solution of the friction coefficient of each hinge joint. A large-scale model testing system of the SYMs is established to perform the damage identification of the bottom hinge joints of the SYMs. The results show that the proposed method can effectively identify the damage degree and position of the hinge joints of the SYMs and provide a real-time warning system for the in-service operation of the SYMs. 相似文献
3.
4.
5.
细长海洋结构物涡激振动研究综述 总被引：5，自引：0，他引：5
随着世界范围内深海石油开采的需要,近年来关于海洋结构物涡激振动的研究越来越受到重视.虽然此问题在数值模拟和实验方面都已取得了一定的进展,但是还有许多问题尚待解决.同时,新型海洋结构物的引入给涡激振动的预报方法和抑振手段提出了新的挑战.因此,细长海洋结构物的涡激振动仍将是未来几年里备受关注的研究课题.本文在介绍有关涡激振动基本概念和理论背景的基础上,总结了近年来关于以深水立管为代表的海洋结构物涡激振动的研究与进展,包括对现有涡激振动分析工具的分类与评估;对柱体及海洋结构物涡激振动的实验研究;对深水立管与涡激振动相关的疲劳评估准则的研究;海洋结构物的横向、流向及轴向涡激振动的耦合作用研究;关于海洋结构物涡激振动的抑振措施和设备的理论及实验研究.本文着重介绍了计算流体力学方法在海洋结构物涡激振动研究中的应用和进展.最后,对海洋结构物涡激振动相关的研究热点的现状进行了总结并对今后工作提出了展望. 相似文献
6.
Long-term operation of mooring systems is one of the challenging issues of floating structures such as floating offshore wind turbines (FOWTs). For integrity assessment, fatigue and its affecting factors have generated considerable recent research interest as the occurrence of a large number of mooring chain failures at a high rate has been reported. By contrast, only few studies on the effect of nonuniform volume loss of mooring chain links due to wear can be found because of difficulties to estimate wear amounts quantitatively. Considering this issue, in this paper, validation of the quantitative interlink wear estimation method is investigated by applying to a spar-type floating structure. Firstly, the method is presented which consists of the material test, derivation of an interlink wear estimation formula with FE analysis, and calculation of mooring chain response with coupled dynamic analysis using a mass-spring model. To improve insufficient accuracy due to the mass-spring model around a clump weight and the touchdown point, the method is further modified by using a 3-D rigid-body link model. The estimation results and comparison show that the modified method distinguishing between rolling and sliding can calculate the interlink wear amount closer to the chain diameter measurements and more reasonable than the method using the conventional mass-spring model. 相似文献
7.
IMO海安会以MSC.99(73)号决议通过的SOLAS74公约修正案,规定了船舶安装船载自动识别系统(AIS)的时间表,并于2002年7月1日生效;我国海事局2005年10月20日规定部分沿海航行船舶,必须于2006年4月30日前配备AIS。本文简要介绍了AIS设备的构成,并详尽分析了AIS装船和检验要求。 相似文献
8.
讨论了船舶结构有限元模型化问题,提出了几个船舶结构分析专用单元。这些单元能准确地反映船舶结构的特点,既能保证精度又有很高的效率。同时,还介绍了一个由作者开发的结构静力、动力有限元分析软件系统SAFE。它具有通用单元库和船舶结构专用单元库,可以进行有限元与边界元的耦合分析。SAFE有高效率的内外存文件管理系统和前后处理软件,可在微机上进行全船分析,是船舶结构设计阶段的一个理想的分析工具。 相似文献
9.
Mooring chains are key components for floating platforms. The failure of these components can be catastrophic in terms of the economic and environmental impacts, especially when dealing with the potential failure of FPSOs. However, mooring failures have been regularly occurring much earlier in their service lives than expected, with almost 50% of the reported failures happening in the first 3 years of 20-year design lives. Although the operating stresses play a major role in determining the failure mechanisms of mooring chains, the methods of predicting the operating stresses in mooring chains vary in the openly available literature, and the accuracy of these different numerical methods for predicting types of mooring failures is unknown. There is currently little evidence provided for when one model is appropriate for a particular scenario. Therefore, this paper benchmarks the different available methods for modelling mooring chains under tension, including FE models found in the literature. These models are calibrated and verified against previous studies and compared with experiments and a developed FE explicit model. There is a significant difference in the way that the numerical models behave, which are discussed in terms of their applicability and limitations in modelling mooring chains. The results of this study show that the explicit modelling approach should be utilised for accurate assessment of mooring lines, as it provides the most realistic response, with a substantial reduction in the computational cost and without any convergence problems. 相似文献
10.
11.
超大型海上浮式结构物连接器基座强度分析 总被引：1，自引：0，他引：1
超大型海上浮式结构物(Very Large Floating Structure, VLFS)是由若干个单模块通过连接器连接而成的海上结构物,连接器是整个结构中最薄弱而又最关键的部分,因此有必要对连接器基座进行静强度分析和极限强度分析。文章采用以包含连接器基座的上箱体为研究对象,选取包含单个连接器基座和两个连接器基座的上箱体局部结构作为模型进行静强度分析,得到了两种模型连接器基座整体Von mises应力不大,但存在基座与连接器连接处、立柱与上箱体底甲板连接处两处明显的高应力区的相关结论。然后,采用非线性有限元准静态法对连接器基座进行极限强度分析,确定结构在危险工况下最先发生破坏的位置,得到基座连接器不同方向的极限承载力。结果表明,连接器基座在各个方向的极限承载力都远大于其载荷预报值,连接器基座具有较大的结构强度储备。文中的研究结果为超大浮体连接器基座的设计和安全可靠性分析提供了相关理论依据。 相似文献
12.
With the increasing applications in the offshore industry such as oil and gas jackets, submarine pipelines and wind turbine foundations, concrete-filled double skin steel tubular (CFDST) structures are encountering the ever-increasing risk of threats to underwater explosions (UNDEX). This study presents a systematical investigation on the structural behaviors and design recommendations of the CFDST structures subjected to UNDEX loadings through finite element analysis (FEA) approaches. Finite element models have been developed, where the non-linear material properties of the constitutive steel and concrete parts and the composite actions in-between have been considered. The FEA models are verified against the experimentally determined shock wave pressure history, the deformation shapes, and the residual strength. The full-range analyses were firstly carried out on the structural responses of CFDST structures, including the typical damage patterns and residual strength of the specimen after UNDEX. Then, the parametric studies show that the cross-section hollow ratio, charge weight, and explosion distance play great roles in determining the residual strengths. Thereafter, damage indexes considering the parameter of the hollow ratio and the scaled explosion distance has been formulated, and design recommendations have been suggested accordingly. 相似文献
13.
During their lifetime, marine structures may be exposed to accidental loadings such as from collisions or explosions, as well as environmental loadings such as from slamming, sloshing and green water. Such loadings can cause damage to structures. Therefore, to minimize such damage, advanced and robust design guidelines should be formulated. Among those loads, in this study, explosions imparting an impulsive pressure loading containing a rapid increase in pressure and a short duration that can cause serious casualties, property losses, and marine pollution were considered. In this paper, a practical and robust method for damage assessment of marine structures exposed to explosion loads based on a single degree of freedom (SDOF) system and numerical simulations is proposed. The SDOF method was improved by introduction of new and better idealization resistance for the system and consideration of the effect of strain-rate, and subsequently was verified by a numerical method developed using the commercial ABAQUS software package. The numerical method was itself validated by comparison with relevant pulse pressure test data available in the open literature (good correlation was shown). Based on the validated numerical models, a rigorous parametric study of the structural response of stiffened plates having actual scantlings of offshore structures was performed. The numerically obtained maximum deformations were compared with the results from the improved SDOF method in a parametric study, and the variation of both methods was verified. Finally, simple yet accurate and reliable formulations for prediction of structural response were empirically derived. These formulations are expected to be usefully employed as a first-hand tool for prediction of damage extent of marine structures (including offshore structures) due to explosion loads. 相似文献
14.
以某船为研究背景,进行了燃气轮机吊装轨道的强度分析研究。首先开展了导轨系统的受力分析,给出了不同类型力载荷的理论计算结果;再利用有限元软件分别建立了导轨的杆梁单元和实体单元三维计算模型;然后确定了10个典型计算步的载荷;经过试算对比两种模型,杆梁单元和实体单元模型相比具有求解速度快,效率高等特点。进而确定了以杆梁单元网格为主要计算模型,实体单元网格为校核计算模型的研究思路。计算结果表明：现有吊装轨道系统的强度满足使用要求,在过渡导轨段是整个导轨系统的薄弱环节,需要进一步优化吊装轨迹或者局部结构加强。 相似文献
15.
The application of floating wind turbines is limited by the high cost that increases with the water depth. Offshore installation and maintenance continue to consume a high percentage of the project budget. To improve the installation efficiency of the floating offshore wind turbine, a novel concept is proposed by the SFI MOVE project. Several wind turbine superstructure components are preassembled onshore and carried to the installation site by a catamaran construction vessel. Each assembly can then be installed using only one lift, and the concept is less sensitive to weather conditions. In this paper, a control algorithm of the proposed hydraulic active heave compensator system is developed using singular perturbation theory to cancel the relative motion between the spar top and gripped preassembly bottom. Closed-loop stability is proven, and the simulation results show that the installation efficiency is improved with an increase in the acceptable weather conditions. 相似文献
16.
The vertical axis wind turbine (VAWT) configuration has many advantages for an offshore wind turbine installation. The VAWT is omnidirectional and its rotating mechanical components can be placed close to sea level. In this paper, the structural analysis of a VAWT blade structure subject to a critical load case was investigated with two methods, an analytical model and a finite element (FE) model. It was shown that the utilisation of a composite blade topology can resist the induced flapwise loading and the material strains were contained within their allowable limits. The analytical approach was demonstrated to be a quick and accurate technique to compute the composite blade strain distribution when compared to the FE model results. 相似文献
17.
In this research,liquid sloshing behavior in a 2-D rectangular tank was simulated using ANSYS-FLUENT software subject to single or multiple-coupled external excitations(such as sway coupled with roll,and sway and roll coupled with heave).The volume of fluid(VOF) method was used to track the free surface of sloshing.External excitation was imposed through the motion of the tank by using the dynamic mesh technique.The study shows that if the tank is subjected to multiple coupled excitations and resonant excitation frequencies,liquid sloshing will become violent and sloshing loads,including impact on the top wall,will be intensified. 相似文献
18.
Metallic strip flexible pipes (MSFP), a relatively new style of unbonded flexible pipes, are considered as an attractive alternative to traditional submarine pipes. During its reeling operation, it will inevitably confront various complicated loads, which may affect the integrity and safety of MSFP's utilization. In this paper, the tension-extension and moment-curvature relation of MSFP were obtained by laboratorial tests. The mechanical properties were then imported into the global model established in ABAQUS. The finite element model was adopted to predict the deformation and mechanical responses of MSFP during the operation process. Besides, the effects of reeling length, the diameter of the coiling drum, and the pulling force were discussed. The obtained conclusions will provide some references for optimizing MSFP design and preventing possible damage in the reeling operation. 相似文献
19.
借助船级社规范与MATLAB软件,开发可提取浮式生产储卸油装置（Floating Production Storage and Offloading,FPSO）管道任意位置处加速度的程序,以便更好地对FPSO主甲板冷却水管路系统进行应力分析。将该系统任意位置处实际加速度值和FPSO船体重心处加速度值以均布载荷形式分别施加至管道上,利用CAESARⅡ软件分析在满载工况条件下该系统的应力变化。结果表明,在FPSO满载工况条件下,采用重心处加速度值得到的结果相较于其自身实际加速度值的作用结果会出现应力冗余和应力不足的情况,例如节点50应力增加1.01%,而节点2570应力减小0.19%。 相似文献